Levels of some heavy Metals in Cocoyam ( Colocasia esculentum ) grown on Soil receiving Effluent from a Paint Industry

The levels of some heavy metals in soil samples and tubers of cocoyam ( Colocasia esculentum ) grown on soil receiving paint wastes (PWS) has been investigated using Atomic Absorption spectrophotometer (Unicam 939/959 model). Similar analyses were carried out for the same plant from a control area. The studies revealed that although the P.W.S contained abnormally high levels of Pb (474.14mgkg-1) and Cu (137.85mgkg-1). The paint waste tuber (PWT) recorded low levels of these metals: Pb (2.13mgkg-1) and Cu (13.85mgkg-1) respectively. Correlation analysis tested at 0.05 level of significance show that no significant correlation existed between the metals levels in the soil and the level in the tuber. In all cases the levels of the metals in the tubers were well below the upper limit documented for unpolluted plant. The results however suggest the ineffectiveness of the use of Colocasia esculentum as a bioindicator for heavy metal pollution in soil.

Genetic diversity assessment of the almond (Prunus dulcis (Mill.) DA Webb) traditional germplasm of Algarve, Portugal, using molecular markers

In this study, 123 almond (Prunus dulcis (Mill.) D. A. Webb) trees identified among traditional orchards in the Algarve region and 53 trees of the local field collection managed by the regional office of the Portuguese Ministry of Agriculture (DRAALG) were assessed using isozyme, inter- single sequence repeat and simple sequence repeat or microsatellite techniques for the evaluation of genetic diversity and genetic relatedness and identification of new accessions for the field collection. The isozyme analysis allowed the distribution of the 176 plants into 13 different classes of enzyme similarity, while the use of DNA markers increased the distribution of the analysed trees among 140 discriminating DNA patterns. Multiple cases of homonymy and synonymy were identified in the local germplasm. Some traditional varieties, such as Lourencinha, appeared to be relatively homogeneous, while other local denominations, e.g. Galamba, included diverse genotypes. Of the 13 commercial varieties analysed in this study, 11 assembled in one major cluster clearly differentiated from the majority of the local genotypes. These results reinforced the perception that the Algarve traditional germplasm constitutes an important repository of genetic diversity, eventually carrying alleles of high agricultural interest such as the recently identified Phomopsis resistance in the traditional variety Barrinho Grado.

Expresión génica diferencial y antioxidantes en la planta de tomate (Solanum lycopersicon L. Mill) enriquecida con selenio

La biofortificación tiene como finalidad incrementar la concentración de elementos biodisponibles en las plantas de cultivo para elevar la calidad nutricional. El selenio es un elemento traza de gran impacto para el metabolismo antioxidante de las plantas y su acumulación es pobre en especies como el tomate, de igual manera este elemento es esencial para los humanos, por lo que adicionarlo en las plantas forma parte de los programas de biofortificación. El propósito de este trabajo fue analizar experimentalmente la capacidad del selenito de sodio para incrementar la concentración de Se y modificar la actividad antioxidante en plantas de tomate. Para ello se usaron plantas de la variedad híbrido Toro y se aplicaron tres tratamientos 0, 2 y 5 mg L-1 de selenito de sodio (Na2SeO3) utilizando como vehículo el agua de riego, los tratamientos fueron aplicados bajo un diseño experimental completamente al azar. Se llevaron a cabo tres muestreos 40, 80 y 120 días después del trasplante y la subsecuente cuantificación de la acumulación de selenio y macronutrientes en hojas, tallos y frutos así como su impacto en la producción de frutos bajo un diseño experimental completamente al azar. Se determinó la altura de la planta, los diámetros de tallos, firmeza, sólidos solubles de frutos y la materia seca total de los diferentes tejidos. Se obtuvo una cuantificación del potencial oxido reducción y de la actividad de antioxidante específicos como la catalasa, glutatión peroxidasa, superóxido dismutasa, el ácido ascórbico y licopeno, para cada variable se llevó a cabo un análisis de varianza y posteriormente una prueba de comparación de medias de Tukey. La expresión de los genes cat, gpx, sod, apx y lic en los frutos fue también analizada y en este caso se aplicó un análisis de varianza no paramétrico de Fisher, para encontrar las diferencias entre tratamientos. Los resultados mostraron un incremento en la acumulación de Se, encontrándose hasta un 53.1% de aumento en la concentración en los frutos bajo el tratamiento 5 mg L-1 en comparación con el testigo, sin embargo, este incremento no tuvo un impacto notorio en la producción y el rendimiento del tomate, a pesar de la existencia de una correlación de Spearman positiva (r =0.9637) entre la producción de fruto y la concentración de Se. Los valores del potencial oxido-reducción se redujeron en promedio desde -41.4 mV para el tratamiento testigo y hasta -68.0 mV con el mayor tratamiento. Mientras tanto, la concentración de Se si influyó positivamente en los parámetros de calidad incluyendo el ácido ascórbico (hasta un 50 % de aumento con el tratamiento 5 mgL-1 ) y el licopeno (hasta un 66.9% de aumento con el mayor tratamiento). La actividad de las enzimas antioxidantes aumentó notablemente en el fruto con el tratamiento 5 mg L-1 de selenito encontrándose 60.9% de aumento para CAT, 33.4% para GPX y 26.0% para SOD. En cuanto la expresión génica hubo mayor nivel de transcriptos de los genes gpx, sod y apx bajo el tratamiento 2 mg L-1

Formulación bioinsecticida a partir del aceite esencial de ambrosia arborescens mill (altamisa) de aplicación canina

La presente investigación se planteó reemplazar el uso de insecticidas sintéticos, formulando un champú bioinsecticida de aplicación canina mediante la acción biocida del aceite esencial deAmbrosia arborescens Mill (Altamisa). La planta se recolectó en las laderas del rio Tomebamba, cercanas al Campus Balzay de la Universidad de Cuenca Parroquia San Joaquín. La recolección se realizó durante los meses de Enero a Marzo del 2016. El desarrollo y formulación del producto se realizó en el Laboratorio de Biotecnología, Facultad de Ciencias Químicas de la Universidad de Cuenca. La obtención del aceite esencial de A. arborescens se realizó mediante hidrodestilación por el método Clevenger, con un rendimiento del 0,14%. La actividad biocida se estableció en un ensayo “in vitro” ante el nematodo Panagrellus redivirus, determinándose la dosis letal (DL50) de 250 uL/mL. Debido a la moderada DL50y bajo rendimiento, se planteó como estrategia, determinar el DL50 del extracto orgánico de A. arborescens, el cual se obtuvo mediante una extracción con metanol, consiguiendo un rendimiento del 2 % y DL50de 31,25 uL/mL. De acuerdo estos resultados se procedió a realizar pruebas en pulgas de perros(Ctenocephalides canis) con el extracto de A. arborescens, estableciendo una efectividad del 100 % a la concentración de 46,875 mg/mL en el periodo de tiempo más corto, siendo esta la dosis aplicada para la formulación del champú. El extracto metanólico de A. arborescens presentó elevada actividad biocida, comparado con el aceite esencial. Esta sustancia activa es promisoria en la formulación de bioinsecticidas para mascotas.

Genetic diversity assessment of the almond (Prunus dulcis (Mill.) DA Webb) traditional germplasm of Algarve, Portugal, using molecular markers

In this study, 123 almond (Prunus dulcis (Mill.) D. A. Webb) trees identified among traditional orchards in the Algarve region and 53 trees of the local field collection managed by the regional office of the Portuguese Ministry of Agriculture (DRAALG) were assessed using isozyme, inter- single sequence repeat and simple sequence repeat or microsatellite techniques for the evaluation of genetic diversity and genetic relatedness and identification of new accessions for the field collection. The isozyme analysis allowed the distribution of the 176 plants into 13 different classes of enzyme similarity, while the use of DNA markers increased the distribution of the analysed trees among 140 discriminating DNA patterns. Multiple cases of homonymy and synonymy were identified in the local germplasm. Some traditional varieties, such as Lourencinha, appeared to be relatively homogeneous, while other local denominations, e.g. Galamba, included diverse genotypes. Of the 13 commercial varieties analysed in this study, 11 assembled in one major cluster clearly differentiated from the majority of the local genotypes. These results reinforced the perception that the Algarve traditional germplasm constitutes an important repository of genetic diversity, eventually carrying alleles of high agricultural interest such as the recently identified Phomopsis resistance in the traditional variety Barrinho Grado.

From Mill Gates to Magic City: U.S. Steel and Welfare Capitalism in Gary, Indiana, 1906-1930

Gary, Indiana is a city with indelible ties to industrial paternalism. Founded in 1906 by United States Steel Corporation to house workers of the trust’s showpiece mill, the emergence of this model company town was both the culmination of lessons learned from its predecessors’ mistakes and innovative corporate planning. U.S. Steel’s Progressive Era adaptation of welfare capitalism characterized the young city through a combination of direct community involvement and laissez-faire social control. This thesis examines the reactionary implementation of paternalist policies in Gary between 1906 and 1930 through the purviews of three elements under corporate influence: housing, education, and social welfare. Each category demonstrates how both the corporation and citizenry affected and adapted Gary’s physical and cultural landscape, public perceptions, and community identity. Parallel to the popular narrative throughout is that of Gary’s African-American community, and the controversial circumstances of this population’s segregated development.

Economic feasibility analysis of the implementation of a high value-added molecule extraction system in an olive oil mill

The production of olive oil generates several by-products that can be seen as an additional business opportunity. Among them are the olive pits, already used for heat and/or electricity generation in some mills. They contain compounds that are commercially very interesting and, if recovered, contribute to the sustainability of the olive mills. The work presented in this paper is a preliminary evaluation of the economic feasibility of implementing a system based on a batch prototype with 1 m3 for the extraction of high value-added bioactive molecules from olive pits that are separated during the production of virgin olive oil. For the analysis, a small representative olive mill in Portugal was considered and the traditional Discounted Cash Flow Method was applied. Based on the assumptions made, the simple payback for implementation a system for the extraction of value-added molecules from the olive pits is around 7 years.

ABOVE-GROUND BIOMASS ESTIMATION OF OPUNTIA FICUS-INDICA (L.) MILL. FOR FORAGE CROP IN A MEDITERRANEAN ENVIRONMENT BY USING NON-DESTRUCTIVE METHODS

In marginal lands Opuntia ficus-indica (OFI) could be used as an alternative fruit and forage crop. The plant vigour and the biomass production were evaluated in Portuguese germplasm (15 individuals from 16 ecotypes) by non-destructive methods, 2 years following planting in a marginal soil and dryland conditions. Two Italian cultivars (Gialla and Bianca) were included in the study for comparison purposes. The biomass production and the plant vigour were estimated by measuring the cladodes number and area, and the fresh (FW) and dry weight (DW) per plant. We selected linear models by using the biometric data from 60 cladodes to predict the cladode area, the FW and the DW per plant. Among ecotypes, significant differences were found in the studied biomass-related parameters and several homogeneous groups were established. Four Portuguese ecotypes had higher biomass production than the others, 3.20 Mg ha−1 on average, a value not significantly different to the improved ‘Gialla’ cultivar, which averaged 3.87 Mg ha−1. Those ecotypes could be used to start a breeding program and to deploy material for animal feeding and fruit production.

CARACTERIZAÇÃO E AVALIAÇÃO DE POPULAÇÕES PORTUGUESAS DE FIGUEIRA-DA-ÍNDIA Opuntia ficus-indica (L.) Mill

A figueira-da-índia (Opuntia ficus-indica (L.) Mill.) é uma espécie com interesse para alimentação humana e animal, particularmente em áreas geográficas onde a disponibilidade de água é um fator limitante na atividade agrícola. Sendo considerada uma planta forrageira alternativa, pode produzir mais de 10 toneladas de matéria seca por hectare e, em condições limitantes de disponibilidade hídrica, supera as plantas C4 e C3 (Andrade-Montemayor et al., 2011). Acrescem ainda outras utilizações como sejam o controlo de erosão de solos, a constituição de barreiras anti-incêndio e a produção de biogás (Jigar et al., 2011, Sánchez et al., 2012). No contexto atual em que, por parte de alguns agricultores, renasceu o interesse por esta espécie, consideramos ser importante a caracterização e avaliação biométrica de populações portuguesas de O. ficus-indica e a sua comparação com variedades melhoradas, quer com o objetivo da produção de fruto para alimentação humana, quer como planta forrageira. Em maio de 2012 foram plantados, na Escola Superior Agrária de Castelo Branco (39º 49' 17.00''N; 7º 27' 41.00''W), num solo de baixa aptidão agrícola, cladódios de dezasseis populações portuguesas de O. ficus-indica, provenientes de diferentes locais e duas variedades italianas (Gialla e Bianca).

Developing knowledge precincts in regional towns: opportunities and challenges

While extensive literature exists on knowledge-based urban development (KBUD) focusing on large metropolitan cities, there is a paucity of literature looking into similar developments in small regional towns. The major aim of the paper is to examine the nature and potential for building knowledge precincts in regional towns. Through a review of extant literature on knowledge precincts, five key value elements and principles for development are identified. These principles are then tested and applied to a case study of the small town of Cooroy in Noosa, Australia. The Cooroy Lower Mill Site and its surroundings are the designated location for what may be called a community-based creative knowledge precinct. The opportunities and challenges for setting up a creative knowledge precinct in Cooroy were examined. The study showed that there is a potential to develop Cooroy with the provision of cultural and learning facilities, partnerships with government, business and educational institutions, and networking with other creative and knowledge precincts in the region. However, there are also specific challenges relating to the development of a knowledge precinct within the regional town and these relate to critical mass, competition and governance.

A study into the permeability and compressibility of Australian bagasse pulp

This is an experimental study into the permeability and compressibility properties of bagasse pulp pads. Three experimental rigs were custom-built for this project. The experimental work is complemented by modelling work. Both the steady-state and dynamic behaviour of pulp pads are evaluated in the experimental and modelling components of this project. Bagasse, the fibrous residue that remains after sugar is extracted from sugarcane, is normally burnt in Australia to generate steam and electricity for the sugar factory. A study into bagasse pulp was motivated by the possibility of making highly value-added pulp products from bagasse for the financial benefit of sugarcane millers and growers. The bagasse pulp and paper industry is a multibillion dollar industry (1). Bagasse pulp could replace eucalypt pulp which is more widely used in the local production of paper products. An opportunity exists for replacing the large quantity of mainly generic paper products imported to Australia. This includes 949,000 tonnes of generic photocopier papers (2). The use of bagasse pulp for paper manufacture is the main application area of interest for this study. Bagasse contains a large quantity of short parenchyma cells called ‘pith’. Around 30% of the shortest fibres are removed from bagasse prior to pulping. Despite the ‘depithing’ operations in conventional bagasse pulp mills, a large amount of pith remains in the pulp. Amongst Australian paper producers there is a perception that the high quantity of short fibres in bagasse pulp leads to poor filtration behaviour at the wet-end of a paper machine. Bagasse pulp’s poor filtration behaviour reduces paper production rates and consequently revenue when compared to paper production using locally made eucalypt pulp. Pulp filtration can be characterised by two interacting factors; permeability and compressibility. Surprisingly, there has previously been very little rigorous investigation into neither bagasse pulp permeability nor compressibility. Only freeness testing of bagasse pulp has been published in the open literature. As a result, this study has focussed on a detailed investigation of the filtration properties of bagasse pulp pads. As part of this investigation, this study investigated three options for improving the permeability and compressibility properties of Australian bagasse pulp pads. Two options for further pre-treating depithed bagasse prior to pulping were considered. Firstly, bagasse was fractionated based on size. Two bagasse fractions were produced, ‘coarse’ and ‘medium’ bagasse fractions. Secondly, bagasse was collected after being processed on two types of juice extraction technology, i.e. from a sugar mill and from a sugar diffuser. Finally one method of post-treating the bagasse pulp was investigated. The effects of chemical additives, which are known to improve freeness, were also assessed for their effect on pulp pad permeability and compressibility. Pre-treated Australian bagasse pulp samples were compared with several benchmark pulp samples. A sample of commonly used kraft Eucalyptus globulus pulp was obtained. A sample of depithed Argentinean bagasse, which is used for commercial paper production, was also obtained. A sample of Australian bagasse which was depithed as per typical factory operations was also produced for benchmarking purposes. The steady-state pulp pad permeability and compressibility parameters were determined experimentally using two purpose-built experimental rigs. In reality, steady-state conditions do not exist on a paper machine. The permeability changes as the sheet compresses over time. Hence, a dynamic model was developed which uses the experimentally determined steady-state permeability and compressibility parameters as inputs. The filtration model was developed with a view to designing pulp processing equipment that is suitable specifically for bagasse pulp. The predicted results of the dynamic model were compared to experimental data. The effectiveness of a polymeric and microparticle chemical additives for improving the retention of short fibres and increasing the drainage rate of a bagasse pulp slurry was determined in a third purpose-built rig; a modified Dynamic Drainage Jar (DDJ). These chemical additives were then used in the making of a pulp pad, and their effect on the steady-state and dynamic permeability and compressibility of bagasse pulp pads was determined. The most important finding from this investigation was that Australian bagasse pulp was produced with higher permeability than eucalypt pulp, despite a higher overall content of short fibres. It is thought this research outcome could enable Australian paper producers to switch from eucalypt pulp to bagasse pulp without sacrificing paper machine productivity. It is thought that two factors contributed to the high permeability of the bagasse pulp pad. Firstly, thicker cell walls of the bagasse pulp fibres resulted in high fibre stiffness. Secondly, the bagasse pulp had a large proportion of fibres longer than 1.3 mm. These attributes helped to reinforce the pulp pad matrix. The steady-state permeability and compressibility parameters for the eucalypt pulp were consistent with those found by previous workers. It was also found that Australian pulp derived from the ‘coarse’ bagasse fraction had higher steady-state permeability than the ‘medium’ fraction. However, there was no difference between bagasse pulp originating from a diffuser or a mill. The bagasse pre-treatment options investigated in this study were not found to affect the steady-state compressibility parameters of a pulp pad. The dynamic filtration model was found to give predictions that were in good agreement with experimental data for pads made from samples of pretreated bagasse pulp, provided at least some pith was removed prior to pulping. Applying vacuum to a pulp slurry in the modified DDJ dramatically reduced the drainage time. At any level of vacuum, bagasse pulp benefitted from chemical additives as quantified by reduced drainage time and increased retention of short fibres. Using the modified DDJ, it was observed that under specific conditions, a benchmark depithed bagasse pulp drained more rapidly than the ‘coarse’ bagasse pulp. In steady-state permeability and compressibility experiments, the addition of chemical additives improved the pad permeability and compressibility of a benchmark bagasse pulp with a high quantity of short fibres. Importantly, this effect was not observed for the ‘coarse’ bagasse pulp. However, dynamic filtration experiments showed that there was also a small observable improvement in filtration for the ‘medium’ bagasse pulp. The mechanism of bagasse pulp pad consolidation appears to be by fibre realignment. Chemical additives assist to lubricate the consolidation process. This study was complemented by pulp physical and chemical property testing and a microscopy study. In addition to its high pulp pad permeability, ‘coarse’ bagasse pulp often (but not always) had superior physical properties than a benchmark depithed bagasse pulp.

The efficacy of an augmented virtual reality system to alleviate pain in children undergoing burns dressing changes : a randomised controlled trial

In children, the pain and anxiety associated with acute burn dressing changes can be severe, with drug treatment alone frequently proving to be inadequate. Virtual reality (VR) systems have been successfully trialled in limited numbers of adult and paediatric burn patients. Augmented reality (AR) differs from VR in that it overlays virtual images onto the physical world, instead of creating a complete virtual world. This prospective randomised controlled trial investigated the use of AR as an adjunct to analgesia and sedation in children with acute burns. Forty-two children (30 male and 12 female), with an age range of 3–14 years (median age 9 years) and a total burn surface area ranging from 1 to 16% were randomised into a treatment (AR) arm and a control (basic cognitive therapy) arm after administration of analgesia and/or sedation. Pain scores, pulse rates (PR), respiratory rates (RR) and oxygen saturations (SaO2) were recorded pre-procedurally, at 10 min intervals and post-procedurally. Parents were also asked to grade their child's overall pain score for the dressing change. Mean pain scores were significantly lower (p = 0.0060) in the AR group compared to the control group, as were parental pain assessment scores (p = 0.015). Respiratory and pulse rates showed significant changes over time within groups, however, these were not significantly different between the two study groups. Oxygen saturation did not differ significantly over time or between the two study groups. This trial shows that augmented reality is a useful adjunct to pharmacological analgesia.