Kaatopaikkakaasujen käsittelyn kehittäminen Korvenmäen kaatopaikalla

Työssä tutkittiin Salossa sijaitsevan Korvenmäen kaatopaikan kaasunkeräysjärjestelmää. Tavoitteena oli selvittää kaatopaikkakaasun talteenoton merkittävimmät haasteet, löytää ratkaisuja ongelmiin ja hajuhaittojen vähentämiseen sekä arvioida keräysjärjestelmän parannusten ja kaatopaikalle tulevan pintarakenteen vaikutus talteenottoon ja hajuhaittoihin. Korvenmäen kaatopaikalla on käytössä vaakakeräysjärjestelmä, jonka merkittävimpiä ongelmia ovat olleet kaatopaikkakaasun matala talteenottoaste, happipitoisuuden nousu, järjestelmän hankala säädettävyys sekä kaatopaikalla ja ympäristössä havaitut hajuhaitat. Muodostuvan ja karkaavan kaatopaikkakaasun määrää arvioitiin Jouko Petäjän metaanilaskentamallin avulla. Tulosten perusteella kaasua muodostuu runsaasti, mutta suurin osa siitä pääsee karkaamaan ympäristöön, sillä arvioitu kaatopaikkakaasun talteenottoaste on tällä hetkellä vain 11 %. Kaasujen käsittelykäytäntöjä suomalaisilla kaatopaikoilla selvitettiin kyselytutkimuksella. Tutkimuksen mukaan kaasunkeräyksen ongelmat ja hajuhaitat ovat yleisiä, mutta erilaisilla toimenpiteillä niitä voidaan huomattavasti vähentää. Korvenmäelle suositeltavia kehitystoimia ovat kaasulinjoihin yhdistettyjen suotoveden keräys- ja tarkkailukaivojen tiivistäminen, vanhojen vaakalinjojen kunnon tarkistus ja korjaus sekä pystykaivojen asentaminen kaasunkeräyksen tehostamiseksi. Pintarakenne tulee valmistuttuaan vähentämään karkaavan kaasun ja kaasulinjoihin imeytyvän ilman määrää. Hajuhaittojen hallinnassa tärkeintä on toimiva kaasunkeräys, mutta lisäksi suositellaan rikkivetyä hapettavien päivittäispeittomateriaalien levittämistä kaatopaikan pinnalle. Kehitystoimenpiteiden myötä kaatopaikkakaasun talteenottoaste tulee paranemaan ja hajuhaitat vähenevät. Kerättävän kaasumäärän kasvaessa mikroturbiinilaitoksen kapasiteettia voidaan lisätä, jotta kaasu saadaan mahdollisimman tehokkaasti hyödynnettyä energiana.

Slurry flows in progressive cavity and in hose pumps

The aim of this thesis was to research how slurry’s viscosity and rheology affect to pumping in peristaltic hose pump and in eccentric progressive cavity pump. In addition, it was researched the formed pressure pulsation in hose pump. Pressure pulsation was studied by pumping different slurries and by using different pipe materials. Pressure and power curves were determined for both used pumps. It was also determined NPSHR curve for the progressive cavity pump. Literature part of the thesis considered to distribute fluids to different rheology types, as well as theories and models to identify different rheology types. Special attention was paid to non-Newtonian fluids, which were also used in experimental part of this thesis. In addition, the literature part discusses about pumps, parameters for pump sizing, and pressure pulsation in hose pump. Starch, bentonite, and carboxymethyl cellulose slurries were used in the experimental part of this thesis. The slurries were pumped with Flowrox peristaltic hose pump (LPP-T32) and eccentric progressive cavity pump (C10/10). From the each slurry was taken a sample, and the samples were analyzed for concentration, viscosity and rheology type. The used pipe materials in pressure pulsation experiments were steel and elastic, and it was also used a prototype of pulsation dampener. The pulsation experiments indicated that the elastic pipe and the prototype of pulsation dampener attenuated pressure pulsation better than the steel pipe at low pressure levels. The differences between different materials disappeared when pressure level and pump rotation speed increased. In slurry experiments, pulsation was different depending on rheology and viscosity of the slurry. According to experiments, the rheology did not significantly affect to pump power consumption or efficiency.

Potential and Challenges of Analog Reconfigurable Computation in Modern and Future CMOS

In this work, the feasibility of the floating-gate technology in analog computing platforms in a scaled down general-purpose CMOS technology is considered. When the technology is scaled down the performance of analog circuits tends to get worse because the process parameters are optimized for digital transistors and the scaling involves the reduction of supply voltages. Generally, the challenge in analog circuit design is that all salient design metrics such as power, area, bandwidth and accuracy are interrelated. Furthermore, poor flexibility, i.e. lack of reconfigurability, the reuse of IP etc., can be considered the most severe weakness of analog hardware. On this account, digital calibration schemes are often required for improved performance or yield enhancement, whereas high flexibility/reconfigurability can not be easily achieved. Here, it is discussed whether it is possible to work around these obstacles by using floating-gate transistors (FGTs), and analyze problems associated with the practical implementation. FGT technology is attractive because it is electrically programmable and also features a charge-based built-in non-volatile memory. Apart from being ideal for canceling the circuit non-idealities due to process variations, the FGTs can also be used as computational or adaptive elements in analog circuits. The nominal gate oxide thickness in the deep sub-micron (DSM) processes is too thin to support robust charge retention and consequently the FGT becomes leaky. In principle, non-leaky FGTs can be implemented in a scaled down process without any special masks by using “double”-oxide transistors intended for providing devices that operate with higher supply voltages than general purpose devices. However, in practice the technology scaling poses several challenges which are addressed in this thesis. To provide a sufficiently wide-ranging survey, six prototype chips with varying complexity were implemented in four different DSM process nodes and investigated from this perspective. The focus is on non-leaky FGTs, but the presented autozeroing floating-gate amplifier (AFGA) demonstrates that leaky FGTs may also find a use. The simplest test structures contain only a few transistors, whereas the most complex experimental chip is an implementation of a spiking neural network (SNN) which comprises thousands of active and passive devices. More precisely, it is a fully connected (256 FGT synapses) two-layer spiking neural network (SNN), where the adaptive properties of FGT are taken advantage of. A compact realization of Spike Timing Dependent Plasticity (STDP) within the SNN is one of the key contributions of this thesis. Finally, the considerations in this thesis extend beyond CMOS to emerging nanodevices. To this end, one promising emerging nanoscale circuit element - memristor - is reviewed and its applicability for analog processing is considered. Furthermore, it is discussed how the FGT technology can be used to prototype computation paradigms compatible with these emerging two-terminal nanoscale devices in a mature and widely available CMOS technology.

Korkeasti kuormitetun soodakattilan likaantumisen ja päästöjen vähentäminen

Tässä työssä perehdytään korkeasti kuormitettujen soodakattiloiden tyypillisiin ongelmiin. Ongelmia ovat likaantuminen ja tukkeutuminen sekä liialliset päästöt. Työn teoriaosassa esitetään taustat likaantumiselle ja päästöjen muodostumiselle. Molemmat johtuvat suurelta osin tulipesän huonosta toiminnasta. Soodakattilan ilmajärjestelmä ja mustalipeän ruiskutus vaikuttavat tulipesän toimintaan. Usein tulipesän toimintaa voidaan parantaa ilmajärjestelmän ja lipeänruiskutuksen säätöjä muuttamalla. Suurempi muutos tulipesän toimintaan saadaan uusimalla perinteinen sekundääri-ilmajärjestelmä vertikaali-ilmajärjestelmäksi. Nykyaikainen vertikaali-ilmajärjestelmä sekoittaa savukaasut tehokkaasti ja saa aikaan tasaisemman virtauksen tulipesään. Myös mustalipeän korkea kloori- ja kaliumpitoisuus voivat aiheuttaa lämpöpintojen likaantumista. Oikea nuohointen sijainti on tärkeä tekijä kattilan puhtaana pysymisen kannalta. Työn kokeellisessa osassa selvitetään, kuinka erään eukalyptussellutehtaan korkeasti kuormitetun soodakattilan käytettävyyttä voidaan parantaa ja kapasiteettia nostaa soodakattilan toimintaa virittämällä. Kattilan nykyinen ajomalli ja ongelmat selvitettiin. Tulipesän toimintaa testattiin muuttamalla ilmajakoa primääri-, sekundääri- ja tertiääri-ilman välillä ja muuttamalla sekundääri-ilman syöttöä tulipesään. Testien ja kerätyn tiedon perusteella voitiin päätellä, miten soodakattilaa kannattaa modernisoida kapasiteetin nostamiseksi ja käytettävyyden parantamiseksi. Usein tulipesän toimintaa ja käytettävyyttä voidaan parantaa paljon jo pienilläkin muutostöillä. Kapasiteetin nostaminen vaatii tavallisesti suuremman investoinnin ja pidennetyn vuosihuoltoseisokin.

Risk factors for excess weight loss and hypernatremia in exclusively breast-fed infants

Data were prospectively obtained from exclusively breast-fed healthy term neonates at birth and from healthy mothers with no obstetric complication to determine risk factors for excess weight loss and hypernatremia in exclusively breast-fed infants. Thirty-four neonates with a weight loss > or = 10% were diagnosed between April 2001 and January 2005. Six of 18 infants who were eligible for the study had hypernatremia. Breast conditions associated with breast-feeding difficulties (P < 0.05), primiparity (P < 0.005), less than four stools (P < 0.001), pink diaper (P < 0.001), delay at initiation of first breast giving (P < 0.01), birth by cesarean section (P < 0.05), extra heater usage (P < 0.005), extra heater usage among mothers who had appropriate conditions associated with breast-feeding (P < 0.001), mean weight loss in neonates with pink diaper (P < 0.05), mean uric acid concentration in neonates with pink diaper (P < 0.0001), fever in hypernatremic neonates (P < 0.02), and the correlation of weight loss with both serum sodium and uric acid concentrations (P < 0.02) were determined. Excessive weight loss occurs in exclusively breast-fed infants and can be complicated by hypernatremia and other morbidities. Prompt initiation of breast-feeding after delivery and prompt intervention if problems occur with breast-feeding, in particular poor breast attachment, breast engorgement, delayed breast milk "coming in", and nipple problems will help promote successful breast-feeding. Careful follow-up of breast-feeding dyads after discharge from hospital, especially regarding infant weight, is important to help detect inadequate breast-feeding. Environmental factors such as heaters may exacerbate infant dehydration.

Influence of the dopaminergic system, CREB, and transcription factor-κB on cocaine neurotoxicity

Cocaine is a widely used drug and its abuse is associated with physical, psychiatric and social problems. Abnormalities in newborns have been demonstrated to be due to the toxic effects of cocaine during fetal development. The mechanism by which cocaine causes neurological damage is complex and involves interactions of the drug with several neurotransmitter systems, such as the increase of extracellular levels of dopamine and free radicals, and modulation of transcription factors. The aim of this review was to evaluate the importance of the dopaminergic system and the participation of inflammatory signaling in cocaine neurotoxicity. Our study showed that cocaine activates the transcription factors NF-κB and CREB, which regulate genes involved in cellular death. GBR 12909 (an inhibitor of dopamine reuptake), lidocaine (a local anesthetic), and dopamine did not activate NF-κB in the same way as cocaine. However, the attenuation of NF-κB activity after the pretreatment of the cells with SCH 23390, a D1 receptor antagonist, suggests that the activation of NF-κB by cocaine is, at least partially, due to activation of D1 receptors. NF-κB seems to have a protective role in these cells because its inhibition increased cellular death caused by cocaine. The increase in BDNF (brain-derived neurotrophic factor) mRNA can also be related to the protective role of both CREB and NF-κB transcription factors. An understanding of the mechanisms by which cocaine induces cell death in the brain will contribute to the development of new therapies for drug abusers, which can help to slow down the progress of degenerative processes.

International adoption: Symptoms of attachment disorders and their associations with the child’s background and developmental outcome

Many internationally adopted children have lived their first years of life in an environment with limited opportunities for primary caregiving. The lack of consistent care increases the prevalence of attachment disorders among them. Less is known about the influences of attachment disorders on a child’s later course of life. This study is part of the Finnish Adoption Study. Parents of all Finnish children who had been internationally adopted by legal adoption organisations between 1985 and 2007 were sent questionnaires (N=1450). Parental evaluations of the children’s symptoms of reactive attachment disorder (RAD) at the time of adoption, their later learning or language problems using a screening scale, and children’s self-reported school bullying experiences were evaluated. Each child’s attachment-related behavioural problems were requested in a follow-up survey 1.9 and 3.8 years after adoption and compared with a Finnish reference group. This study indicated that Finnish internationally adopted children have at least three-fold prevalence of learning and language problems compared with their age-mates. A child’s symptoms of attachment disorders were associated with learning or language problems at school age as well as with his/her school bullying experiences. The adopted children had more attachment-related behavioural problems two years after adoption than their age-mates, but the difference was no longer evident four years after adoption. In conclusion, this study showed that the symptoms of attachment disorder indicate a risk for an adopted child’s later developmental outcome. The findings demonstrate the need for comprehensive clinical examinations and planning of treatment strategies for children with symptoms of RAD.

Capital investments planning and life cycle simulations for the new valves manufacturing facility in Russia

The focus of the research is on the derivation of the valid and reliable performance results regarding establishment and launching of the new full-scale industrial facility, considering the overall current conditions for the project realization in and out of Russia. The study demonstrates the process of the new facility concept development, with following perfor-mance calculation, comparative analyzes conduction, life-cycle simulations, performance indicators derivation and project`s sustainability evaluation. To unite and process the entire input parameters complexity, regards the interlacing between the project`s internal technical and commercial sides on the one hand, and consider all the specifics of the Russian conditions for doing business on the other hand, was developed the unique model for the project`s performance calculation, simulations and results representation. The complete research incorporates all corresponding data to substantiate the assigned facility`s design, sizing and output capacity for high quality and cost efficient ferrous pipe-line accessories manufacturing, as well as, demonstrates that this project could be suc-cessfully realized in current conditions in Russia and highlights the room for significant performance and sustainability improvements based on the indexes of the derived KPIs.

Thermal and moisture content effects on storability and seed dormancy releasing on Brachiaria brizantha cultivars

Brachiaria species normally show a double seed dormancy mechanism, mainly on fresh-harvested seeds, leading to germination percentages lower than those of viability detected by tetrazolium test (TZ) and causing problems as to storage, trading and seed inspection activities. The adoption of the methodology to detect the constants of the viability equation (high storage temperatures and fixed moisture contents) made feasible in this research to isolate the effects of 40, 50 and 65°C on B. brizantha cultivars Marandu, Mulato 1 and Mulato 2 seed dormancy releasing, after storage with moisture contents ranging from 1.9 and 17.8%. Seed samples presented high dormancy levels, detected by TZ and it was complete and partially released by chemical scarification and accelerated ageing test, respectively. No statistical differences were observed as to the speed of germination (T50); however, differences among cultivars were detected as to number of seed per gram. Sorption and desorption isotherm curves were similar for the cultivars. Seed dormancy releasing was better achieved at 40 and 50°C with mc ranging from 7.6 to 10.8%. The temperature of 50°C appears to be adequate for seed dormancy releasing in all mc analyzed. No significant seed dormancy releasing result was observed at 65°C. The cultivar Marandu presented the highest storability throughout the experiment.

Hurry up and slow down : education to close the ingenuity gap /

To explore the idea of education to close the ingenuity gap I use Thomas Homer-Dixon's work to define ingenuity. The notion that the supply of ingenuity to solve our technical and social problems is not keeping pace with the ingenuity required to solve those problems is called the ingenuity gap. Man-made technological developments are increasing the density, intensity, and pace of globalisation. People must reorganise decision-making organisations and problem-solving methods to pragmatically combat the growing ingenuity gap. John Dewey's work illustrates the fundamental attitudes for the thinking and judgment associated with educating for ingenuity. Howard Gardner's idea that truth, beauty, and morality ought to form the core values and tenets of the philosophy of educating for ingenuity is integral to this thesis. The act of teaching facilitates the invitation to the communication necessary to foster ingenuity. John Novak-discusses the five relationships of educational leadership that enhance an environment of ingenuity. The International Baccalaureate (IB) is an existing model of global education, one that defines some of the school experiences and academic development of core values of educating for ingenuity. Expanding upon the structure of the IB and other research within this thesis, I speculate upon what my school, where educating for ingenuity so as to close the ingenuity gap is the goal, would be like.

Motivational model of problem drinking for men and women /

This thesis tested a path model of the relationships of reasons for drinking and reasons for limiting drinking with consumption of alcohol and drinking problems. It was hypothesized that reasons for drinking would be composed of positively and negatively reinforcing reasons, and that reasons for limiting drinking would be composed of personal and social reasons. Problem drinking was operationalized as consisting of two factors, consumption and drinking problems, with a positive relationship between the two. It was predicted that positively and negatively reinforcing reasons for drinking would be associated with heavier consumption and, in turn, more drinking problems, through level of consumption. Negatively reinforcing reasons were also predicted to be associated with drinking problems directly, independent of level of consumption. It was hypothesized that reasons for limiting drinking would be associated with lower levels of consumption and would be related to fewer drinking problems, through level of consumption. Finally, among women, reasons for limiting drinking were expected to be associated with drinking problems directly, independent of level of consumption. The sample, was taken from the second phase of the Niagara Young Aduh Health Study, a community sample of young adult men and women. Measurement models of reasons for drinking, reasons for limiting drinking, and problem drinking were tested using Confirmatory Factor Analysis. After adequate fit of each measurement model was obtained, the complete structural model, with all hypothesized paths, was tested for goodness of fit. Cross-group equality constraints were imposed on all models to test for gender differences. The results provided evidence supporting the hypothesized structure of reasons for drinking and problem drinking. A single factor model of reasons for limiting drinking was used in the analyses because a two-factor model was inadequate. Support was obtained for the structural model. For example, the resuhs revealed independent influences of Positively Reinforcing Reasons for Drinking, Negatively Reinforcing Reasons for Drinking, and Reasons for Limiting Drinking on consumption. In addition. Negatively Reinforcing Reasons helped to account for Drinking Problems independent of the amount of alcohol consumed. Although an additional path from Reasons for Limiting Drinking to Drinking Problems was hypothesized for women, it was of marginal significance and did not improve the model's fit. As a result, no sex differences in the model were found. This may be a result of the convergence of drinking patterns for men and women. Furthermore, it is suggested that gender differences may only be found in clinical samples of problem drinkers, where the relative level of consumption for women and men is similar.

Perceptions of some teachers about the similarities and/or differences in teaching online versus in a classroom environment /

The introduction of computer and communications technology, and particularly the internet, into education has opened up some new possibilities for teaching and learning. Courses designed and delivered in an online environment offer the possibility of highly interactive and individually focussed teaching and learning experiences. However, online courses also present new challenges for both teachers and students. A qualitative study was conducted to explore teachers' perceptions about the similarities and differences in teaching in the online and face-to-face (F2F) environments. Focus group discussions were held with 5 teachers; 2 teachers were interviewed in depth. The participants, 3 female and 2 male, were full-time teachers from a large College of Applied Arts & Technology in southern Ontario. Each of them had over 10 years of F2F teaching experience and each had been involved in the development and teaching of at least one online course. i - -; The study focussed on how teaching in the online environment compares with teaching in the F2F environment, what roles teachers and students adopt in each setting, what learning communities mean online and F2F and how they are developed, and how institutional policies, procedures, and infrastructure affect teaching and learning F2F and online. This study was emic in nature, that is the teachers' words determine the themes identified throughout the study. The factors identified as affecting teaching in an online environment included teacher issues such as course design, motivation to teach online, teaching style, role, characteristics or skills, and strategies. Student issues as perceived by the teachers included learning styles, role, and characteristics or skills. As well, technology issues such as a reliable infrastructure, clear role and responsibilities for maintaining the infrastructure, support, and multimedia capability affected teaching online. Finally, administrative policies and procedures, including teacher selection and training, registration and scheduling procedures, intellectual property and workload policies, and the development and communication of a comprehensive strategic plan were found to impact on teaching online. The teachers shared some of the benefits they perceived about teaching online as well as some of the challenges they had faced and challenges they perceived students had faced online. Overall, the teachers feh that there were more similarities than differences in teaching between the two environments, with the main differences being the change from F2F verbal interactions involving body language to online written interactions without body language cues, and the fundamental reliance on technology in the online environment. These findings support previous research in online teaching and learning, and add teachers' perspectives on the factors that stay the same and the factors that change when moving from a F2F environment to an online environment.

An educator's perspective of Dr. Feingold's K-P (Kaiser- Permanents) elimination diet for hyperkinetic children and others

Do evaluation of the literature and a regional observational report support Dr. Feingold's claim that the K-P (Kaiser-Permanente) elimination diet improves the behaviours of hyperkinetic children, and others? Dr. Feingold suggests that some hyperkinetic children, and other children as well, are genetically predisposed to intolerance of food additives, particularly food colours and flavours. He claims that the K-P diet, that eliminates salicylates and artificial food colours and flavours, improves the hyperkinetic child's behaviour, muscle co-ordination, and scholastic performance. Public acceptance of the K-P diet has outstripped acceptance in the medical and scientific communities. Evaluation of available data and additional studies are needed to arrive at a conclusion of acceptance or rejection of the K-P diet for hyperkinetic children and others. My interest in the K-P elimination diet for hyperkinetic children is educational. My experience as an elementary school teacher in special education and in the classroom from K-8 has taught me that attentiveness is crucial to learning. Hyperkinesis appears to impair a child's ability to attend. Learning problems appear, followed by behavioural and social problems. l If we accept the possibility of a relationship between diet and attentiveness, and attentiveness and school behaviours, then the diet-behaviour link could be of lay importance. For instance, if a diet such as the K-P diet could do what is claimed, substantial benefits could accrue to the child. One could, for example, improve a child's behaviours. One could identify attending disturbances early in the child's education, possibly minimizing, or eliminating future difficulties in school. Finally, the greatest benefit may be the fulfillment of the basic goal of our Ontario schools, that the eh~ld-,lIla1p.evelop happily and competently within our educational framework. 2 This thesis reports evidence from the literature and from a regional observational investigation to determine the possibility of a link between the behaviours of children and Dr. Feingold's K-P elimination diet. The literature research examines (1) Dr. Feingold's concept of H-LD, (2) his K-P elimination diet, and (3) the response from three sectors, medicine, science, and the public. The regional investigation examines the observed behaviours of nine children in Regional Niagara during a nine-month period on the K-P diet.

Cognitive set, absorption, and achievement as moderators of the perceptual closure effect in picture priming /

The present study examined individual differences in Absorption and fantasy, as well as in Achiievement and achievement striving as possible moderators of the perceptual closure effect found by Snodgrass and Feenan (1990). The study also examined whether different instructions (experiential versus instrumental) interact with the personality variables to moderate the relationship between priming and subsequent performance on a picture completion task. 1 28 participants completed two sessions, one to fill out the MPQ and NEO personality inventories and the other to complete the experimental task. The experimental task consisted of a priming phase and a test phase, with pictures presented on a computer screen for both phases. Participants were shown 30 pictures in the priming phase, and then shovm the 30 primed pictures along with 30 new pictures for the test phase. Participants were randomly assigned to receive one of the two different instruction sets for the task. Two measures of performance were calculated, most fragmented measure and threshold. Results of the present study confirm that a five-second exposure time is long enough to produce the perceptual closure effect. The analysis of the two-way interaction effects indicated a significant quadratic interaction of Absorption with priming level on threshold performance. The results were in the opposite direction of predictions. Possible explanations for the Absorption results include lack of optimal conditions, lack of intrinsic motivation and measurement problems. Primary analyses also revealed two significant between-subject effects of fantasy and achievement striving on performance collapsed across priming levels. These results suggest that fantasy has a beneficial effect on performance at test for pictures primed at all levels, whereas achievement striving seems to have an adverse effect on performance at test for pictures primed at all levels. Results of the secondary analyses with a revised threshold performance measure indicated a significant quadratic interaction of Absorption, condition and priming level. In the experiential condition, test performance, based on Absorption scores for pictures primed at level 4, showed a positive slope and performance for pictures primed at levels 1 and 7 based on Absorption showed a negative slope. The reverse effect was found in the instrumental condition. The results suggest that Absorption, in combination with experiential involvement, may affect implicit memory. A second significant result of the secondary analyses was a linear three-way interaction of Achievement, condition and priming level on performance. Results suggest that as Achievement scores increased, test performance improved for less fragmented primed pictures in the instrumental condition and test performance improved for more highly fragmented primes in the experiential condition. Results from the secondary analyses suggest that the revised threshold measure may be more sensitive to individual differences. Results of the exploratory analyses with Openness to Experience, Conscientiousness and agentic positive emotionality (PEM-A) measures indicated no significant effects of any of these personality variables. Results suggest that facets of the scales may be more useful with regard to perceptual research, and that future research should examine narrowly focused personality traits as opposed to broader constructs.

Second Welland Canal - Book 1, Survey Map 6 - Through Grantham and Louth Townships

Survey map of the Second Welland Canal created by the Welland Canal Company showing the area between the Townships of Grantham and Louth. Identified structures associated with the Canal include the floating tow path. The surveyors' measurements and notes can be seen in red and black ink and pencil. Features of the First Welland Canal are noted in red ink and include the old towing path, and the original bed of the Twelve Mile Creek. Local area landmarks are also identified and include streets and roads (ex. New Road, 1st Concession Road, and an unnamed road in the top right corner), an unnamed bridge along New Road, J. Martindale's House, an Old Saw Mill, Richardsons Creek, Georges Point, and an oak tree at Georges Point. Properties and property owners of note are: Concession 2 Lot 23 and Concession 3 Lot 23 in the Grantham Township, Concession 2 Lots 1 and 2, and Concession 3 Lots 1 and 2 in the Louth Township, Peter Weaver, J. Martindale, and John Bonner. A property belonging to the Board of Works is outlined in red at Georges Point.