Monolithic zirconium dioxide as a full contour restorative material: With special emphasis on the optical and mechanical properties

Full contour monolithic zirconia restorations have shown an increased popularity in the dental field over the recent years, owing to its mechanical and acceptable optical properties. However, many features of the restoration are yet to be researched and supported by clinical studies to confirm its place among the other indirect restorative materials This series of in vitro studies aimed at evaluating and comparing the optical and mechanical properties, light cure irradiance, and cement polymerization of multiple monolithic zirconia material at variable thicknesses, environments, treatments, and stabilization. Five different monolithic zirconia materials, four of which were partially stabilized and one fully stabilized were investigated. The optical properties in terms of surface gloss, translucency parameter, and contrast ratio were determined via a reflection spectrophotometer at variable thicknesses, coloring, sintering method, and after immersion in an acidic environment. Light cure irradiance and radiant exposure were quantified through the specimens at variable thicknesses and the degree of conversion of two dual-cure cements was determined via Fourier Transform Infrared spectroscopy. Bi-axial flexural strength was evaluated to compare between the partially and fully stabilized zirconia prepared using different coloring and sintering methods. Surface characterization was performed using a scanning electron microscope and a spinning disk confocal microscope. The surface gloss and translucency of the zirconia investigated were brand and thickness dependent with the translucency values decreasing as the thickness increased. Staining decreased the translucency of the zirconia and enhanced surface gloss as well as the flexural strength of the fully stabilized zirconia but had no effect on partially stabilized zirconia. Immersion in a corrosive acid increased surface gloss and decreased the translucency of some zirconia brands. Zirconia thickness was inversely related to the amount of light irradiance, radiant exposure, and degree of monomer conversion. Type of sintering furnace had no effect on the optical and mechanical properties of zirconia. Monolithic zirconia maybe classified as a semi-translucent material that is well influenced by the thickness, limiting its use in the esthetic zones. Conventional acid-base reaction, autopolymerizing and dual-cure cements are recommended for its cementation. Its desirable mechanical properties give it a high potential as a restoration for posterior teeth. However, close monitoring with controlled clinical studies must be determined before any definite clinical recommendations can be drawn.

Avaliação do perfil sensorial de chá light sabor pêssego

No presente estudo foi determinado o perfil sensorial e a aceitação de três marcas comerciais de chá light sabor pêssego, denominadas A, B e C, acondicionadas em embalagem PET e adquiridas no comércio local. O perfil sensorial foi determinado por Análise Descritiva Quantitativa (ADQ) utilizando-se uma equipe de 11 provadores rigorosamente selecionados e treinados. A aceitação dos produtos foi avaliada por 33 consumidores representativos do público alvo. Os resultados da ADQ foram submetidos à Análise de Variância (ANOVA), Teste de Média de Tukey e Análise de Componentes Principais. As amostras comerciais apresentaram perfis semelhantes em alguns termos descritores e diferenças significativas em outros. A amostra A caracterizou-se principalmente pelos atributos aroma e sabor de banana passa; a amostra B por aroma artificial de pêssego e refrescância; e a amostra C por aroma natural de pêssego e doçura. O Teste Afetivo, analisado por ANOVA e Teste de Média de Tukey, indicou maior aceitação para a amostra C. A cor das amostras foi avaliada pelo método Cielab L*a*b*, sendo que a amostra C se destacou das demais pela cor vermelha.

Physical-chemical, caloric and sensory characterization of light jambolan (Syzygium cumini Lamarck) jelly

In Brazil, several little economically explored fruits have good potential as raw material for the agro-industry. This study aimed to produce and determine the physical-chemical and sensory characteristics of light jambolan jelly. This fruit has intense purple color, which gave the jellies - both standard and light - a quite attractive visual aspect. The light jellies exhibited similar physical-chemical characteristics to the ones developed through the conventional method and; with the proportion of sweeteners used, the caloric values of the formulations were reduced to the range of 41 to 53%, attending the requirements of the Brazilian legislation for this type of product. The sensory profile obtained for the 4 light formulations developed, clearly showed the tasters' preference for the jelly elaborated with the association of cyclamate and saccharin. Thus, the results revealed good perspectives for the application of this fruit in the food industry.

Optimal distance of the light-curing tip for light transmission through the resin composite

Hammaslääketieteessä käytetettävien komposiittien valonläpäisevyys vaihtelee. Samoin LED-valokovettimet eroavat toisistaan valotehonsa ja muotoilunsa perusteella. On yleisesti tiedossa, että valokovettimesta tulevan valon intensiteetti pinta-alayksikköä kohden heikkenee, kun kovettimen etäisyys kasvaa. Toisaalta ei ole tiedossa, miten valokovetettavan kohteen ja valokovettimen kärjen väliin sijoitettu materiaali tarkalleenottaen vaikuttaa valon intensiteettiin eri etäisyyksiä käytettäessä. Tämän tutkimuksen tarkoituksena on selvittää, miten valokovetettavan kohteen ja valokovettimen kärjen väliin asetettava etukäteen polymerisoitu materiaali vaikuttaa valon intensiteettiin eri etäisyyksillä. Tutkimus suoritettiin käyttämällä kahta eri valokovetinta. Jotta etäisyyden vaikutusta valotustehoon voitiin demonstroida, vaihdettiin kovettimen etäisyyttä sensorista 0,2,4,6,8,10mm välillä. Valotehot rekisteröitiin MARC resin calibrator -laitteella. Sensorin ja valokovettimen kärjen väliin asetettavat erilaiset komposiittilevyt olivat valmiiksi kovetettuja,1mm paksuisia, filleripitoisuuksiltaan neljää erilaista muovia. Valotehot rekisteröitiin jokaiselta etäisyydeltä komposiitin ollessa sensorin päällä. Rinnakkaisesti verrattiin myös etäisyyden vaikutusta valotehoon ilman esikovetettua materiaalia kovettimen kärjen ja valoa mittaavan sensorin välissä. Vertailun suorittamiseksi laskettiin intensiteettisuhdeluku muovillisen ja muovittoman arvon välillä aina tietyllä etäisyydellä Valokovettimen kärjen etäisyyden kasvattaminen sensorista (eli valokovetettavasta kohteesta) odotusten mukaisesti pienensi valotehoa. Laittamalla sensorin ja kovettimen väliin komposiittilevy, valoteho pieneni odotetusti vielä enemmän. Tutkittaessa intensiteettisuhdetta (valoteho muovin kanssa : valoteho ilman muovia) kuitenkin huomattiin, että 4-6mm:n kohdalla suhdeluku oli suurempi kuin 0,2,8 ja 10mm kohdalla. Johtopäätöksenä oli, että suurin mahdollinen valokovetusteho saavutetan laittamalla kovetuskärki mahdollisimman lähelle kohdetta. Jos valokovetettavan kohteen ja valokovettimen kärjen välissä oli kiinteä komposiittipalanen, suurin mahdollinen valokovetusteho kohteeseen saavutetaan edelleen laittamalla kovetuskärki kiinni muoviin. Jos etäisyyttä muovin pinnasta sen sijaan kasvatettiin, valokovetusteho ei laskenutkaan niin nopeasti kuin oli odotettu. Tämä voi liittyä siihen, että tehokkaan valokeilan halkaisijan koko on suurempi verrattuna komposiitin sekä sensorin halkaisian kokoon. Toiseksi on arvioitu, että resiinikomposiitin täyteaineet voisivat fokusoida läpi kulkevaa valoa sensoriin. Se, pitääkö tämä ilmiö paikkansa, vaatii kuitenkin enemmän tutkimusta

Freedom of choice and bounded rationality: a brief appraisal of behavioral economists' plea for light paternalism

Behavioral economics has addressed interesting positive and normative questions underlying the standard rational choice theory. More recently, it suggests that, in a real world of boundedly rational agents, economists could help people to improve the quality of their choices without any harm to autonomy and freedom of choice. This paper aims to scrutinize available arguments for and against current proposals of light paternalistic interventions mainly in the domain of intertemporal choice. It argues that incorporating the notion of bounded rationality in economic analysis and empirical findings of cognitive biases and self-control problems cannot make an indisputable case for paternalism.

Price movement in the Brazilian land market (1994-2010): an analysis in the light of post-Keynesian theory

ABSTRACT The present study aims to evaluate crop, pasture and forest land prices in Brazil, between 1994 and 2010, in the light of Post-Keynesian theory. The results provide evidence that land, more than just a simple factor of production, must be conceived of as an economic asset. In fact, the price of rural land is determined not only by the expected profitability deriving from agricultural activities but also by the agents' expectations about its future appreciation and liquidity in an economic environment permeated with uncertainty. In this context, as an object of speculation, land has been particularly important as a store of value.

Implementation of educational change in Finland: The case of the undivided basic education reform

For the past decades, educational large-scale reforms have been elaborated and implemented in many countries and often resulted in partial or complete failure. These results brought researchers to study policy processes in order to address this particular challenge. Studies on implementation processes brought to light an existing causal relationship between the implementation process and the effectiveness of a reform. This study aims to describe the implementation process of educational change in Finland, who produced efficient educational reforms over the last 50 years. The case study used for the purpose of this study is the national reform of undivided basic education (yhtenäinen peruskoulu) implemented in the end of the 1990s. Therefore, this research aims to describe how the Finnish undivided basic education reform was implemented. This research was carried out using a pluralist and structuralist approach of policy process and was analyzed according to the hybrid model of implementation process. The data were collected using a triangulation of methods, i.e. documentary research, interviews and questionnaires. The data were qualitative and were analyzed using content analysis methods. This study concludes that the undivided basic education reform was applied in a very decentralized manner, which is a reflection of the decentralized system present in Finland. Central authorities provided a clear vision of the purpose of the reform, but did not control the implementation process. They rather provided extensive support in the form of transmission of information and development of collaborative networks. Local authorities had complete autonomy in terms of decision-making and implementation process. Discussions, debates and decisions regarding implementation processes took place at the local level and included the participation of all actors present on the field. Implementation methods differ from a region to another, with is the consequence of the variation of the level of commitment of local actors but also the diversity of local realities. The reform was implemented according to existing structures and values, which means that it was in cohesion with the context in which it was implemented. These results cannot be generalized to all implementation processes of educational change in Finland but give a great insight of what could be the model used in Finland. Future studies could intent to confirm the model described here by studying other reforms that took place in Finland.

Implementation of educational change in Finland: The case of the undivided basic education reform

For the past decades, educational large-scale reforms have been elaborated and implemented in many countries and often resulted in partial or complete failure. These results brought researchers to study policy processes in order to address this particular challenge. Studies on implementation processes brought to light an existing causal relationship between the implementation process and the effectiveness of a reform. This study aims to describe the implementation process of educational change in Finland, who produced efficient educational reforms over the last 50 years. The case study used for the purpose of this study is the national reform of undivided basic education (yhtenäinen peruskoulu) implemented in the end of the 1990s. Therefore, this research aims to describe how the Finnish undivided basic education reform was implemented. This research was carried out using a pluralist and structuralist approach of policy process and was analyzed according to the hybrid model of implementation process. The data were collected using a triangulation of methods, i.e. documentary research, interviews and questionnaires. The data were qualitative and were analyzed using content analysis methods. This study concludes that the undivided basic education reform was applied in a very decentralized manner, which is a reflection of the decentralized system present in Finland. Central authorities provided a clear vision of the purpose of the reform, but did not control the implementation process. They rather provided extensive support in the form of transmission of information and development of collaborative networks. Local authorities had complete autonomy in terms of decision-making and implementation process. Discussions, debates and decisions regarding implementation processes took place at the local level and included the participation of all actors present on the field. Implementation methods differ from a region to another, with is the consequence of the variation of the level of commitment of local actors but also the diversity of local realities. The reform was implemented according to existing structures and values, which means that it was in cohesion with the context in which it was implemented. These results cannot be generalized to all implementation processes of educational change in Finland but give a great insight of what could be the model used in Finland. Future studies could intent to confirm the model described here by studying other reforms that took place in Finland.

Geographical Studies of Underwater Light Dynamics in the Coastal Archipelago of SW Finland, Baltic Sea

The underwater light field is an important environmental variable as it, among other things, enables aquatic primary production. Although the portion of solar radiation that is referred to as visible light penetrates water, it is restricted to a limited surface water layer because of efficient absorption and scattering processes. Based on the varying content of optical constituents in the water, the efficiency of light attenuation changes in many dimensions and over various spatial and temporal scales. This thesis discusses the underwater light dynamics of a transitional coastal archipelago in south-western Finland, in the Baltic Sea. While the area has long been known to have a highly variable underwater light field, quantified knowledge on the phenomenon has been scarce, patchy, or non-existent. This thesis focuses on the variability in the underwater light field through euphotic depths (1% irradiance remaining), which were derived from in situ measurements of vertical profiles of photosynthetically active radiation (PAR). Spot samples were conducted in the archipelago of south-western Finland, mainly during the ice-free growing seasons of 2010 and 2011. In addition to quantifying both the seasonal and geographical patterns of euphotic depth development, the need and usability of underwater light information are also discussed. Light availability was found to fluctuate in multiple dimensions and scales. The euphotic depth was shown to have combined spatio-temporal dynamics rather than separate changes in spatial and temporal dimensions. Such complexity in the underwater light field creates challenges in data collection, as well as in its utilisation. Although local information is needed, in highly variable conditions spot sampled information may only poorly represent its surroundings. Moreover, either temporally or spatially limited sampling may cause biases in understanding underwater light dynamics. Consequently, the application of light availability data, for example in ecological modelling, should be made with great caution.

Spectral retinal image processing and analysis for ophthalmology

Diabetic retinopathy, age-related macular degeneration and glaucoma are the leading causes of blindness worldwide. Automatic methods for diagnosis exist, but their performance is limited by the quality of the data. Spectral retinal images provide a significantly better representation of the colour information than common grayscale or red-green-blue retinal imaging, having the potential to improve the performance of automatic diagnosis methods. This work studies the image processing techniques required for composing spectral retinal images with accurate reflection spectra, including wavelength channel image registration, spectral and spatial calibration, illumination correction, and the estimation of depth information from image disparities. The composition of a spectral retinal image database of patients with diabetic retinopathy is described. The database includes gold standards for a number of pathologies and retinal structures, marked by two expert ophthalmologists. The diagnostic applications of the reflectance spectra are studied using supervised classifiers for lesion detection. In addition, inversion of a model of light transport is used to estimate histological parameters from the reflectance spectra. Experimental results suggest that the methods for composing, calibrating and postprocessing spectral images presented in this work can be used to improve the quality of the spectral data. The experiments on the direct and indirect use of the data show the diagnostic potential of spectral retinal data over standard retinal images. The use of spectral data could improve automatic and semi-automated diagnostics for the screening of retinal diseases, for the quantitative detection of retinal changes for follow-up, clinically relevant end-points for clinical studies and development of new therapeutic modalities.

Collaborative reflection : supporting one practitioner's development of online learning communities /

This is a study of one participant's reflective practice as she worked to develop online communities in a face-to-face science course. Her process of reflective practice was examined in order to address factors that influenced her learning path, and the benefits and challenges of collaborative action research. These research goals were pursued using a collaborative action research methodology, initially chosen for its close match with Schon's (1983) model of reflective practice. The participant's learning fit vnth Mezirow's (1991) model of transformative learning. She began with beliefs that matched her goals, and she demonstrated significant learning in three areas. First, she demonstrated instrumental learning around the constraints of workload and time, and achieving online learning community indicators. Second, she demonstrated communicative learning that helped her to see her own needs for feedback and communication more clearly, and how other process partners had been a support to her. Third, her emancipatory learning saw her revisiting and questioning her goals. It was through the reflective conversation during the planned meetings and the researcher's reframing and interrogation of that reflection that the participant was able to clarify and extend her thinking, and in so doing, critically reflect on her practice as she worked to develop online learning communities. In this way, the collaborative action research methodology was an embodiment of co-constructivism through collaborative reflective practice. Schon's (1983) model of reflective practice positions a lone practitioners moving through cycles ofplan-act-observe-reflect. The results fi"om this study suggest that collaboration is an important piece of the reflective practice model.

Synechococcus sp. PCC 7002 CpcB lyase null mutations alter phycocyanin chromophore function and, consequently, affect the redistribution of excitation energy via the light state transition /

Phycobilisomes are the major light harvesting complexes for cyanobacteria and phycocyanin is the primary phycobiliprotein of the phycobilisome rod. The phycocyanobilin lyases responsible for chromophorylating the phycocyanin p subunit (CpcB) have been recently identified in the cyanobacterium Synechococcus sp. PCC 7002. Surprisingly, mutants missing the CpcB lyases were nevertheless capable of producing pigmented phycocyanin. 10K absorbance measurements revealed that the energy states of the p phycocyanin chromophores were only subtly shifted; however, 77K steady state fluorescence emission spectroscopy showed excitation energy transfer involving the targeted chromophores to be highly disrupted. Such evidence suggests that phycobilin orientation within the binding domain is specifically modified. We hypothesized that alternate, less specific lyases are able to act on the p binding sites. A phycocyanin linker-polypeptide deficient mutant was similarly characterized. The light state transition, a short term adaptation of the photosynthetic light harvesting apparatus resulting in the redistribution of excitation energy among the photo systems, was shown to be dominated by the reallocation of phycocyanin-absorbed excitation energy. Treatment with a high M phosphate buffer effectively prevented the redistribution of both chlorophyll a- and phycobilisome- absorbed excitation energy, suggesting that the two effects are not strictly independent. The mutant strains required a larger redistribution of excitation energy between light states, perhaps to compensate for their loss in phycobilisome antenna function.

Effects of reflection and social isolation on crayfish behaviour /

Visual stimuli and socialization influence exploratory behaviour in crayfish. The predominant components of spontaneous exploratory behaviour were determined by observing the activity of solitary adult crayfish (Procambarus clarkii) in a glass aquarium containing fresh water and no objects. Five distinct behaviours were observed: rearing up (climbing on the wall), turning around, cornering (facing the comer), backward walking, and crossing (crossing the midline of the aquarium). The frequency of rearing up, cornering and turning around decreased when reflection from the glass wall was blocked with black cardboard, black paint or non-reflective transparent plastic. In a tank containing mirrors on one side and non-reflective plastic on the other, crayfish cornered, reared up, and turned around more in front of the mirrors. Socialization was necessary for crayfish to respond to the reflection. Crayfish that were housed in pairs for two weeks exhibited more rearing up, turning around and cornering in front of the mirrors than in the non-reflective side. Crayfish isolated for two weeks did not show these differences. Socialized crayfish also exhibited more rearing up, turning around and cornering than did isolated crayfish. Thus, crayfish respond to visual stimuli provided by a glass tank, but the responds depends on socialization.

Crystal growth, Raman scattering and optical properties of the superconductor Cd2Re2O7(16O, 18O)/

Using the Physical Vapor Transport method, single crystals of Cd2Re207 have been grown, and crystals of dimensions up to 8x6x2 mm have been achieved. X-ray diffraction from a single crystal of Cd2Re207 has showed the crystal growth in the (111) plane. Powder X-ray diffraction measurements were performed on ^^O and ^^O samples, however no difference was observed. Assigning the space group Fd3m to Cd2Re207 at room temperature and using structure factor analysis, the powder X-ray diffraction pattern of the sample was explained through systematic reflection absences. The temperatiure dependence of the resistivity measurement of ^^O has revealed two structural phase transitions at 120 and 200 K, and the superconducting transition at 1.0 K. Using Factor Group Analysis on three different structiures of Cd2Re207, the number of IR and Raman active phonon modes close to the Brillouin zone centre have been determined and the results have been compared to the temperature-dependence of the Raman shifts of ^^O and ^*0 samples. After scaling (via removing Bose-Einstein and Rayleigh scattering factors from the scattered light) all spectra, each spectrum was fitted with a number of Lorentzian peaks. The temperature-dependence of the FWHM and Raman shift of mode Eg, shows the effects of the two structurjil phase transitions above Tc. The absolute reflectance of Cd2Re207 - '^O single crystals in the far-infrared spectral region (7-700 cm~^) has been measured in the superconducting state (0.5 K), right above the superconducting state (1.5 K), and in the normal state (4.2 K). Thermal reflectance of the sample at 0.5 K and 1.5 K indicates a strong absorption feature close to 10 cm~^ in the superconducting state with a reference temperature of 4.2 K. By means of Kramers-Kronig analysis, the absolute reflectance was used to calculate the optical conductivity and dielectric function. The real part of optical conductivity shows five distinct active phonon modes at 44, 200, 300, 375, and 575 cm~' at all temperatures including a Drude-like behavior at low frequencies. The imaginary part of the calculated dielectric function indicates a mode softening of the mode 44 cm~' below Tc.