628 resultados para Ligações aparafusadas


Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this work it were developed synthetic and theoretical studies for clerodane-type diterpenes obtained from Croton cajucara Benth which represents one of the most important medicinal plant of the Brazil amazon region. Specifically, the majoritary biocompound 19-nor-clerodane trans-dehydrocrotonin (t-DCTN) isolated from the bark of this Croton, was used as target molecule. Semi-synthetic derivatives were obtained from t-DCTN by using the followed synthetic procedures: 1) catalytic reduction with H2, 2) reduction using NaBH4 and 3) reduction using NaBH4/CeCl3. The semi-synthetic 19-nor-furan-clerodane alcohol-type derivatives were denominated such as t-CTN, tCTN-OL, t-CTN-OL, t-DCTN-OL, t-DCTN-OL, being all of them characterized by NMR. The furan-clerodane alcohol derivatives t-CTN-OL and tCTN-OL were obtained form the semi-synthetic t-CTN, which can be isolated from the bark of C. cajucara. A theoretical protocol (DFT/B3LYP) involving the prevision of geometric and magnetic properties such as bond length and angles, as well as chemical shifts and coupling constants, were developed for the target t-DCTN in which was correlated NMR theoretical data with structural data, with satisfactory correlation with NMR experimental data (coefficients ranging from 0.97 and 0.99) and X-ray diffraction data. This theoretical methodology was also validated for all semi-synthetic derivatives described in this work. In addition, topological data from the Quantum Theory of Atoms in Molecules (QTAIM) showed the presence of H-H and (C)O--H(C) intramolecular stabilized interactions types for t-DCTN e t-CTN, contributing to the understanding of the different reactivity of this clerodanes in the presence of NaBH4.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The advance of drilling in deeper wells has required more thermostable materials. The use of synthetic fluids, which usually have a good chemical stability, faces the environmental constraints, besides it usually generate more discharge and require a costly disposal treatment of drilled cuttings, which are often not efficient and require mechanical components that hinder the operation. The adoption of aqueous fluids generally involves the use of chrome lignosulfonate, used as dispersant, which provides stability on rheological properties and fluid loss under high temperatures and pressures (HTHP). However, due to the environmental impact associated with the use of chrome compounds, the drilling industry needs alternatives that maintain the integrity of the property and ensure success of the operation in view of the strong influence of temperature on the viscosity of aqueous fluids and polymers used in these type fluids, often polysaccharides, passives of hydrolysis and biological degradation. Therefore, vinyl polymers were selected for this study because they have predominantly carbon chain and, in particular, polyvinylpyrrolidone (PVP) for resisting higher temperatures and partially hydrolyzed polyacrylamide (PHPA) and clay by increasing the system's viscosity. Moreover, the absence of acetal bonds reduces the sensitivity to attacks by bacteria. In order to develop an aqueous drilling fluid system for HTHP applications using PVP, HPAM and clay, as main constituents, fluid formulations were prepared and determined its rheological properties using rotary viscometer of the Fann, and volume filtrate obtained by filtration HTHP following the standard API 13B-2. The new fluid system using polyvinylpyrrolidone (PVP) with high molar weight had higher viscosities, gels and yield strength, due to the effect of flocculating clay. On the other hand, the low molecular weight PVP contributed to the formation of disperse systems with lower values in the rheological properties and fluid loss. Both systems are characterized by thermal stability gain up to around 120 ° C, keeping stable rheological parameters. The results were further corroborated through linear clay swelling tests.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The advance of drilling in deeper wells has required more thermostable materials. The use of synthetic fluids, which usually have a good chemical stability, faces the environmental constraints, besides it usually generate more discharge and require a costly disposal treatment of drilled cuttings, which are often not efficient and require mechanical components that hinder the operation. The adoption of aqueous fluids generally involves the use of chrome lignosulfonate, used as dispersant, which provides stability on rheological properties and fluid loss under high temperatures and pressures (HTHP). However, due to the environmental impact associated with the use of chrome compounds, the drilling industry needs alternatives that maintain the integrity of the property and ensure success of the operation in view of the strong influence of temperature on the viscosity of aqueous fluids and polymers used in these type fluids, often polysaccharides, passives of hydrolysis and biological degradation. Therefore, vinyl polymers were selected for this study because they have predominantly carbon chain and, in particular, polyvinylpyrrolidone (PVP) for resisting higher temperatures and partially hydrolyzed polyacrylamide (PHPA) and clay by increasing the system's viscosity. Moreover, the absence of acetal bonds reduces the sensitivity to attacks by bacteria. In order to develop an aqueous drilling fluid system for HTHP applications using PVP, HPAM and clay, as main constituents, fluid formulations were prepared and determined its rheological properties using rotary viscometer of the Fann, and volume filtrate obtained by filtration HTHP following the standard API 13B-2. The new fluid system using polyvinylpyrrolidone (PVP) with high molar weight had higher viscosities, gels and yield strength, due to the effect of flocculating clay. On the other hand, the low molecular weight PVP contributed to the formation of disperse systems with lower values in the rheological properties and fluid loss. Both systems are characterized by thermal stability gain up to around 120 ° C, keeping stable rheological parameters. The results were further corroborated through linear clay swelling tests.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The discussion about rift evolution in the Brazilian Equatorial margin during the South America-Africa breakup in the Jurassic/Cretaceous has been focused in many researches. But rift evolution based on development and growth of faults has not been well explored. In this sense, we investigated the Cretaceous Potiguar Basin in the Equatorial margin of Brazil to understand the geometry of major faults and the influence of crustal heterogeneity and preexisting structural fabric in the evolution of the basin internal architecture. Previous studies pointed out that the rift is an asymmetrical half-graben elongated along the NE-SW direction. We used 2D seismic, well logs and 3D gravity modeling to analyze four major border fault segments and determine their maximum displacement (Dmax) and length (L) ratio in the Potiguar Rift. We constrained the 3D gravity modeling with well data and the interpretation of seismic sections. The difference of the fault displacement measured in the gravity model is in the order of 10% compared to seismic and well data. The fault-growth curves allowed us to divide the faulted rift border into four main fault segments, which provide roughly similar Dmax/L ratios. Fault-growth curves suggest that a regional uniform tectonic mechanism influenced growth of the rift fault segments. The variation of the displacements along the fault segments indicates that the fault segments were formed independently during rift initiation and were linked by hard and soft linkages. The latter formed relay ramps. In the interconnection zones the Dmax/L ratios are highest due to interference of fault segment motions. We divided the evolution of the Potiguar Rift into five stages based on these ratios and correlated them with the major tectonic stages of the breakup between South America and Africa in Early Cretaceous.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The discussion about rift evolution in the Brazilian Equatorial margin during the South America-Africa breakup in the Jurassic/Cretaceous has been focused in many researches. But rift evolution based on development and growth of faults has not been well explored. In this sense, we investigated the Cretaceous Potiguar Basin in the Equatorial margin of Brazil to understand the geometry of major faults and the influence of crustal heterogeneity and preexisting structural fabric in the evolution of the basin internal architecture. Previous studies pointed out that the rift is an asymmetrical half-graben elongated along the NE-SW direction. We used 2D seismic, well logs and 3D gravity modeling to analyze four major border fault segments and determine their maximum displacement (Dmax) and length (L) ratio in the Potiguar Rift. We constrained the 3D gravity modeling with well data and the interpretation of seismic sections. The difference of the fault displacement measured in the gravity model is in the order of 10% compared to seismic and well data. The fault-growth curves allowed us to divide the faulted rift border into four main fault segments, which provide roughly similar Dmax/L ratios. Fault-growth curves suggest that a regional uniform tectonic mechanism influenced growth of the rift fault segments. The variation of the displacements along the fault segments indicates that the fault segments were formed independently during rift initiation and were linked by hard and soft linkages. The latter formed relay ramps. In the interconnection zones the Dmax/L ratios are highest due to interference of fault segment motions. We divided the evolution of the Potiguar Rift into five stages based on these ratios and correlated them with the major tectonic stages of the breakup between South America and Africa in Early Cretaceous.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this work a chitosan (CS) ionically crosslinked were manufactured by treatment with sulfuric acid solution for application in the treatment of wastewater from oil industry. Two crosslinking process were developed: homogeneous and heterogeneous. In the homogeneous process the ratio molar of SO42-/ NH3+ (1:6 and 1:4) were the variable analyzed, denominated CS16 and CS14 respectively. In the heterogeneous process the soaking time of the membranes in sulfuric acid solution were the variable studied, being used times of 5 (CS5) and 30 (CS30) minutes. FTIR-ATR results indicated no changes in the characteristics of chitosan after homogeneous crosslinking process, while heterogeneous crosslinking showed formation of ionic bonds between protonated groups from chitosan and the crosslinking agent sulfate ions. TG/DTG and XRD analysis confirmed the formation of these interactions, as also shown the new structure on the surface region of CS5 and CS30 membranes compared to CS, CS16 e CS14. Swelling test in aqueous medium have shown that crosslinking process reduced the membrane sorption capacity. Swelling test in acid medium demonstrated that CS16 and CS14 membranes increasing the adsorption capacity up to a maximum percentage of 140% approximately, whereas the CS5 e CS30 reached a maximum of 60%. The mechanical properties indicated the stiff and ductile behavior of crosslinked membrane. Adsorption experiments of CuCl2 results that CS16 membranes reached the efficiency maximum with 73% of copper removal at pH 5.0 and 87% at pH 4.0. The experiments with CuSO4 also obtained efficiency maximum to the CS16 membrane and 80% to the removal of Cu2+ ions. Also was verified that the increase of concentration and temperature cause a decrease in the adsorption capacity for all membranes. Kinetics study indicated that pseudo-second-order obtained characterized better the membranes. Equilibrium studies demonstrated that the CS, CS16 and CS14 follow the Langmuir model, whereas CS5 and CS30 follows Freundlich model. Filtration experiments results with rejection maximum to the CS16 and CS5 membranes, reaching 92 and 98% respectively.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this work a chitosan (CS) ionically crosslinked were manufactured by treatment with sulfuric acid solution for application in the treatment of wastewater from oil industry. Two crosslinking process were developed: homogeneous and heterogeneous. In the homogeneous process the ratio molar of SO42-/ NH3+ (1:6 and 1:4) were the variable analyzed, denominated CS16 and CS14 respectively. In the heterogeneous process the soaking time of the membranes in sulfuric acid solution were the variable studied, being used times of 5 (CS5) and 30 (CS30) minutes. FTIR-ATR results indicated no changes in the characteristics of chitosan after homogeneous crosslinking process, while heterogeneous crosslinking showed formation of ionic bonds between protonated groups from chitosan and the crosslinking agent sulfate ions. TG/DTG and XRD analysis confirmed the formation of these interactions, as also shown the new structure on the surface region of CS5 and CS30 membranes compared to CS, CS16 e CS14. Swelling test in aqueous medium have shown that crosslinking process reduced the membrane sorption capacity. Swelling test in acid medium demonstrated that CS16 and CS14 membranes increasing the adsorption capacity up to a maximum percentage of 140% approximately, whereas the CS5 e CS30 reached a maximum of 60%. The mechanical properties indicated the stiff and ductile behavior of crosslinked membrane. Adsorption experiments of CuCl2 results that CS16 membranes reached the efficiency maximum with 73% of copper removal at pH 5.0 and 87% at pH 4.0. The experiments with CuSO4 also obtained efficiency maximum to the CS16 membrane and 80% to the removal of Cu2+ ions. Also was verified that the increase of concentration and temperature cause a decrease in the adsorption capacity for all membranes. Kinetics study indicated that pseudo-second-order obtained characterized better the membranes. Equilibrium studies demonstrated that the CS, CS16 and CS14 follow the Langmuir model, whereas CS5 and CS30 follows Freundlich model. Filtration experiments results with rejection maximum to the CS16 and CS5 membranes, reaching 92 and 98% respectively.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This thesis aims to present a study of the Fibonacci sequence, initiated from a simple problem of rabbits breeding and the Golden Ratio, which originated from a geometrical construction, for applications in basic education. The main idea of the thesis is to present historical records of the occurrence of these concepts in nature and science and their influence on social, cultural and scientific environments. Also, it will be presented the identification and the characterization of the basic properties of these concepts and howthe connection between them occurs,and mainly, their intriguing consequences. It is also shown some activities emphasizing geometric constructions, links to other mathematics areas, curiosities related to these concepts and the analysis of questions present in vestibular (SAT-Scholastic Aptitude Test) and Enem(national high school Exam) in order to show the importance of these themes in basic education, constituting an excellent opportunity to awaken the students to new points of view in the field of science and life, from the presented subject and to promote new ways of thinking mathematics as a transformative science of society.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A estrutura política e econômica brasileira promove uma sociedade marcada por desigualdades sociais, gerando indignações e diversos conflitos. Estresse, ansiedade, depressão, mal estar profissional, infraestrutura precária, alimentação inadequada, sedentarismo, (i)mobilidade urbana, fragilidade dos vínculos sociais, poluição, dentre outros, são fatores contemporâneos que afetam a qualidade de vida dos seres humanos. Este cenário merece atenção peculiar quando nos remetemos ao ambiente escolar. Este estudo teve por objetivo avaliar a qualidade de vida bem como identificar o grau de estresse percebido em diretores de Escolas Municipais de Educação Infantil (EMEIs) na Cidade de São Paulo. Participaram do estudo 86 Diretores de Escolas, correspondendo a 16,04% do total de diretores de EMEIs da Rede Municipal de Educação (RME). Os instrumentos utilizados foram: Questionário sociodemográfico, Instrumento de Avaliação de Qualidade de Vida-abreviado - WHOQOL-bref e a Escala de Estresse Percebido – PSS. Os resultados revelaram que, em média, 70,9% possuem uma excessiva rotina de trabalho, caracterizadas por: chegar mais cedo e/ou sair mais tarde do expediente normal; receber e/ou fazer ligações, mensagens, e-mails ou similares, relacionados à direção, fora do expediente de trabalho e levar serviços para casa e/ou se preocupar com questões relativas à direção, após encerrar o expediente. A maioria (60,05%) acredita que as condições de trabalho, enquanto Diretor de Escola influenciam negativamente na saúde pessoal. Tanto o índice geral da Qualidade de Vida quanto em relação aos domínios do WHOQOL-bref mostraram médias significativamente abaixo dos dados normativos brasileiros 12,7±3,1 (p<0,001). Quanto ao nível de estresse percebido, inicialmente analisamos as frequências referentes aos respectivos níveis. Os resultados mostraram que o nível de estresse percebido se situa entre 48,8% de “às vezes” para 41,9% de “quase sempre”. Este resultado se apresenta estatisticamente significativo (χ2 p<0,05). Com base neste estudo pudemos observar a escassez de estudos sobre QV e estresse com Diretores de Escolas e que a QV se apresentou significativamente baixa, bem como a percepção de estresse em quase metade da amostra estudada.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Os recentes desenvolvimentos na saúde, sociedade e tecnologia, têm conduzido a novas formas de estar. Encarar hoje a doença oncológica (DO) é enfrentar um desafio. A comunicação, também sofreu evolução e a Internet assume um espaço crescente na sociedade. O blogue revolucionou a partilha de experiências, como é o caso da vivência da DO, podendo ser gerador de um processo de construção de ajuda mútua. Emergiu a questão: Quais os bloguitas mais ativos e dominantes numa rede de pessoas com doença oncológica com blogue? Este artigo tem como objetivos: Identificar as pessoas com DO com blogue; Identificar as pessoas mais ativas e as pessoas dominantes na rede, recorrendo à Análise Estrutural da Rede Social. Para selecionar a amostra recorreu-se ao método de amostragem não probabilística, intencional, em bola de neve. A rede encontrada constitui-se por 32 blogues, com 1602 ligações (720 com pessoas com DO e 434 na rede), dos quais foram selecionados 17 blogues. A rede estudada tem uma boa densidade (0,438), pelo que a informação se difunde com facilidade entre os nós, cujos atores têm altos níveis de capital social.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O presente relatório de prática supervisionada pretende apresentar duas vertentes da prática pedagógica desenvolvida ao longo do Mestrado em Educação Pré-Escolar e Ensino do 1.º Ciclo do Ensino Básico. A primeira parte expõe a dimensão reflexiva na qual são apresentados aspetos intrínsecos às práticas pedagógicas desenvolvidas. Inicialmente, são refletidos assuntos referentes à educação pré-escolar e, posteriormente, ao 1.º Ciclo do Ensino Básico. Dentro de ambos os contextos, são referidas aprendizagens desenvolvidas pela mestranda durante todo o processo. A dimensão investigativa apresenta uma investigação desenvolvida, igualmente, no contexto de prática pedagógica. O objetivo central deste estudo consistiu em compreender o papel da utilização pedagógica de estratégias integradoras da matemática e da expressão plástica para as aprendizagens dos alunos de uma turma de 2.º ano. Este estudo teve como participantes vinte e um alunos de uma escola pública do concelho de Leiria. Foram desenvolvidas duas sequências didáticas, assentes nas seguintes atividades: 1.ª sequência) observação e análise de uma obra de arte; seleção e organização de elementos formais presentes na obra de Kandinsky; produção de uma composição visual; e seleção e organização das figuras geométricas representadas nas suas próprias composições visuais; 2.ª sequência) observação e análise de obras de arte; e produção de uma figura simétrica. É possível sugerir que a utilização de estratégias integradoras permitiu o estabelecimento de ligações entre conhecimentos e materiais comuns a ambas as áreas, sendo que os alunos puderam identificar a educação artística na matemática e vice-versa. Também, puderam desenvolver a observação, a sensibilidade, o raciocínio e, não menos importante, a motivação para a aprendizagem. De forma transversal a ambas as dimensões do relatório, encontra-se a relevância da reflexão e do processo de investigação para a prática docente.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

As transformações nas relações contratuais e na ligação psicológica do indivíduo à organização motivaram a realização do presente estudo. Os seus objectivos centrais consistiram em, por um lado, analisar a influência do tipo de vínculo na formação do Contrato Psicológico dos indivíduos com a organização e, por outro lado, compreender a relação do Contrato Psicológico com o Empenhamento na Carreira e com o Commitment Organizacional, e o que poderá distinguir estas relações. A metodologia apoiou-se num questionário, aplicado a uma amostra de 102 profissionais com vínculos de trabalho estáveis e instáveis, de diferentes organizações, ramos profissionais e sectores de actividade. A amostra é proporcional e representativa. (a) Os resultados demonstram que os profissionais prestadores de serviço são o único caso em que o tipo de vínculo tem influência significativa sobre a formação do Contrato Psicológico, percepcionando uma ligação transaccional com a organização. (b) Em contrapartida, provam que uma maior ou menor estabilidade contratual não tem influência significativa sobre os Contratos Psicológicos relacional ou equilibrado. (c) Os resultados sugerem ainda que o Contrato Psicológico está mais directamente relacionado com o Empenhamento na Carreira do que com o Commitment Organizacional. O Contrato Psicológico apresenta correlações fortes com o Empenhamento na Carreira e a consequente utilização de comportamentos individuais de Gestão de Carreira, sendo esta mais significativa nas ligações psicológicas de tipo equilibrado e relacional. No que respeita ao Commitment Organizacional, este não apresenta relação significativa com o Contrato Psicológico mas verificamos a existência de focus de Commitment Organizacional. Os resultados comprovam que o Contrato Psicológico se correlaciona com a sua dimensão normativa. As conclusões evidenciam o incremento das relações transaccionais, motivadas pela menor durabilidade dos vínculos e o desenvolvimento de reduzidas expectativas na relação com a organização e para o carácter individual e circunstancial das ligações psicológicas, que já não obedecem a um padrão tipo. Perante cenários de grande instabilidade, independentemente do Contrato Psicológico estabelecido, a preocupação com a Carreira ganha relevância. Os profissionais actuais tendem a transferir a preocupação com o vínculo e a segurança no emprego para questões de carreira, segurança de empregabilidade e sucesso psicológico. Observa-se que a lealdade à organização é na maior parte dos casos transferida para a lealdade à carreira. / Transformations in contractual relationships and in the psychological connection of an individual to an organization have motivated the execution of the present study. The main objectives of this study were, on the one hand, to analyze the influence of the type of contractual bond in the shaping of the psychological contract of individuals with an organization, and, on the other hand, to understand the relationship between the psychological contract, the career commitment and the organizational commitment, to understand subsequently what may distinguish these relationships. The methodology was supported by a questionnaire, which was applied to a sample of 105 professionals with both stable and unstable contractual bonds in different organizations, professional lines of business and activity sectors. The sample is proportional and representative. (a) The results demonstrate that service providing professionals are the only case in which the type of contractual bond has a significant influence on the shaping of a psychological contract, perceived as a transactional connection with the organization. (b) On the other hand a higher or lower contractual stability has no significant influence or relationship with the psychological contract, relational or balanced. (c) The results also suggest that the psychological contract is more directly related to career commitment than to organizational commitment. The psychological contract shows a strong correlation with the career commitment and the consequent use of the individual behaviour of Career Management, with the latter being more significant to a balanced and relational type of psychological connection. In regard to Organizational Commitment, this presents no significant relationship with the psychological contract but the focus on the organizational commitment is verified. The results also show that the psychological contract is correlated with its normative dimension. The increase in transactional relationships are evident. This is driven by reduction of the durability of contractual bonds and the development of reduced expectations in relation to the organization and the individual character and circumstance of the psychological connections, which no longer conform to a standard type. Scenarios of great instability, regardless of the psychological contract established, cause the concern with career to gain relevance. Current professionals tend to transfer their concerns about contractual bonds and job security to career issues, job security and psychological success. It can also be seen that loyalty to the organization is, in most cases, transferred to loyalty to the career.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Uma “rede social” diz respeito a uma estrutura constituída por pessoas ou organizações que partilham interesses, motivações e valores comuns. Um ponto partilhado pelos diversos tipos de rede social é a troca de informações, conhecimentos, interesses e esforços na tentativa de atingir objectivos comuns, muitas vezes potencializando forças e recursos em situações de crise. Recentemente tem-se ouvido falar bastante deste conceito aplicado à internet. A maternidade constitui, por si só, um momento de crise na vida de cada família e de cada mulher, requerendo adaptações e mudanças. O estudo realizado teve o intuito de avaliar o suporte online e offline (denominando-se essas ligações de redes sociais), no caso específico de assuntos ligados à maternidade. Pretendeu-se verificar também se existia uma correlação entre estes tipos de suporte e os níveis de stress e solidão sentidos pelas mães. Por último, aferiu-se ainda a influência que a idade dos filhos teria nesta adesão a grupos de suporte à maternidade, no Facebook. Este estudo teve uma amostra constituída por 170 mulheres (mães), estando as suas idades compreendidas entre os 25 e os 62 anos. Os resultados revelaram que apesar de não haver diferenças estatisticamente significativas entre o apoio online e offline, as mulheres que pertencem a grupos do Facebook tendem a sentir mais suporte por parte das plataformas de suporte disponíveis. Constatou-se ainda que não existem diferenças significativas entre os níveis de solidão e stress, entre mães que pertencem a grupos e mães que não pertencem. Foi interessante verificar que as mulheres com filhos mais novos (faixa etária dos 0-4 anos) têm uma presença mais significativa em grupos de apoio à maternidade, no Facebook. Pensamos que isso se deve às dúvidas e ao stresse gerado por um primeiro filho ou pela introdução de mais um filho no núcleo familiar, nos primeiros anos em que tal ocorre, procurando por isso mais activamente grupos que ajudem como rede de suporte, para partilhas, apoio emocional e esclarecimento de dúvidas. / A “social network” refers to a structure formed by individuals or organisations that share interests, motivations and common values. A feature shared by several types of social network is the exchange of information, knowledge, interests and efforts, in an attempt to achieve common goals, often potentiating strengths and resources in crisis situations. Recently, we have heard of this concept applied to the internet. Motherhood is, by itself, a moment of crisis in the life of every family and every woman, requiring adaptations and changes. This study aimed to assess online and offline supports (being these connections themselves denominated social networks), in the specific case of motherhood-related issues. It was also intended to confirm whether there was a correlation between these types of support and stress and loneliness levels sensed by mothers. Finally, it was evaluated as well the influence that the children’s age would have on this adherence to motherhood support groups on Facebook. This study had a sample of 170 women (mothers), with ages between 25 and 62 years. The results showed that, although there are no statistically significant differences between the online and offline support, women who belong to Facebook groups tend to feel more support from the available support platforms. It was shown as well that there are no significant differences between loneliness and stress levels among mothers who belong to groups and mothers who do not belong to those groups. It was interesting to find that women with young children (aged 0-4 years old) have a more significant presence in motherhood support groups on Facebook. We think that this is due to the doubts and the stress generated by a first child or the introduction of another child in the household, therefore making sense that they seek, in the early years of the child’s life, groups that help as a support network, for shares, emotional support and answering questions.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

agricultural, pharmaceutical, cosmetic or bioenergy applications. They contain bioactive compounds, namely, polysaccharides Fucoidan. These polysaccharides are mainly constituted by fucose residues and sulfate esters, and have been reported to possess a broad variety of bioactivities, such as anticoagulant, anti-thrombotic, anti-inflammatory, anti-tumor, antiviral and antioxidant. In this work, the fucoidans from brown seaweed Fucus vesiculosus from “Ria de Aveiro” were isolated and characterized in order to add value to this natural resource of the region. The polysaccharides from the algae were extracted with hot water and fractioned by ethanol precipitation and calcium chloride salts. They were further purified by using anion-exchange chromatography, allowing to separate the neutral polysaccharides (laminaranas) from those negatively charged (sulfated fucoidans and alginate). The purified polysaccharides showed high content of fucose (41 mol%) and sulfates (50 mol%), having also galactose residues (6 mol%), which confirm the presence of only sulfated fucoidans. Glycosidic linkages analysis show the presence of high amounts of terminal fucose (25%) and (1→3,4)-Fuc (26%), allowing to infer that the fucoidans were highly branched. These fucoidans are composed also by (1→2)-Fuc (14%) and (1→3)-Fuc linkages (10-16%). In this work it was also tested an alternative extraction technology, the microwave hydrodiffusion and gravity system, where it was possible to extract sugars, although in low yields. However, this methodology allowed to extract polysaccharides, constituted mainly by fucose and uronic acids, as well as mannitol, without the need to add any solvent, obtaining at the end the dry alga. The current work allowed to characterize the structure of the fucoidans isolated from “Ria de Aveiro” F. vesiculosus. The presence of high content of sulfate residues and the high branch degree of the purified fucoidans allow to infer that these polysaccharides could have potential to be studied for biomedical applications, according to their biological activities.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Aborda-se a biossegurança aplicada a radiologia dentária relativa à radiação ionizante e a exposição aos agentes biológicos, a que pacientes, grávidas / feto e profissionais são submetidos durante os procedimentos radiológicos. As diferentes doses de radiação emitidas, pelos equipamentos utilizados em radiologia oral, quer nos sistemas analógicos, como digitais. As diversas formas de propagação de micro-organismos, durante a obtenção de imagens radiográficas. As medidas de biossegurança, para prevenção desses riscos em radiologia dentária, através da radioprotecção e do controlo da infeção. A radiação ionizante pela sua elevada energia, é capaz de penetrar na matéria, ionizar os átomos, romper ligações químicas e causar danos nos tecidos biológicos. A exposição a doses elevadas de radiação ionizante pode ainda resultar, na destruição de células ou na indução de cancro. Atualmente a biossegurança em radiologia dentária, tem como principais objetivos, a redução da dose de radiação e evitar a infeção cruzada entre os diferentes agentes envolvidos.