Fine structure of Mytella falcata (Bivalvia) gill filaments

Bivalve filter feeders are sessile animals that live in constant contact with water and its pollutants. Their gill is an organ highly exposed to these conditions due to its large surface and its involvement in gas exchanges and feeding. The bivalve Mytella falcata is found in estuaries of Latin America, on the Atlantic as well as the Pacific Coast. It is commonly consumed, and sometimes is the only source of protein of low-income communities. In this study, gill filaments of M. falcata were characterized using histology, histochemistry and transmission electron microscopy for future comparative studies among animals exposed to environmental pollutants. Gill filaments may be divided into abfrontal, intermediate and frontal zones. Filaments are interconnected by ciliary discs. In the center of filaments, haemocytes circulate through a haemolymph vessel internally lined by an endothelium and supported by an acellular connective tissue rich in polysaccharides and collagen. The abfrontal zone contains cuboidal cells, while the intermediate zone consists of a simple squamous epithelium. The frontal zone is composed of five columnar cell types: one absorptive, mainly characterized by the presence of pinocytic vesicles in the apical region of the cell; one secretory, rarely observed and three ciliated with abundant mitochondria. All cells lining the filament exhibit numerous microvilli and seem to absorb substances from the environment. PAS staining was observed in mucous cells in the frontal and abfrontal zones. Bromophenol blue allowed the distinction of haemocytes and detection of a glycoprotein secretion in the secretory cells of the frontal region. The characteristics of M. falcata gill filaments observed in this study were very similar to those of other bivalves, especially other Mytilidae, and are suitable for histopathological studies on the effect of water-soluble pollutants. (C) 2007 Elsevier Ltd. All rights reserved.

The upgraded DO detector

The DO experiment enjoyed a very successful data-collection run at the Fermilab Tevatron collider between 1992 and 1996. Since then, the detector has been upgraded to take advantage of improvements to the Tevatron and to enhance its physics capabilities. We describe the new elements of the detector, including the silicon microstrip tracker, central fiber tracker, solenoidal magnet, preshower detectors, forward muon detector, and forward proton detector. The uranium/liquid -argon calorimeters and central muon detector, remaining from Run 1, are discussed briefly. We also present the associated electronics, triggering, and data acquisition systems, along with the design and implementation of software specific to DO. (c) 2006 Elsevier B.V. All rights reserved.

b-Jet identification in the D0 experiment

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A novel method for modeling the recoil in W boson events at hadron colliders

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Potencialidades analíticas do dietilditiofosfato de amônio em espectrometria de massas com plasma indutivamente acoplado empregando extração em fase sólida e sistemas de injeção em fluxo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Peak Separation by Derivative Spectroscopy Applied to FTIR Analysis of Hydrolized Silica

Reliable spectral analysis is only achieved if the spectrum is thoroughly investigated in regard to all hidden and overlapped peaks. This paper describes the steps undertaken to find and separate such peaks in the range of 3000 to 4000 cm(-1) in the case of three different infrared absorption spectra of the glass surface of hydrolyzed silica optical fibers. Peak finding was done by the analysis of the second and fourth derivatives of the digital data, coupled with the available knowledge of infrared spectroscopy of silica-water interaction in the investigated range. Peak separation was accomplished by curve fitting with four different models. The model with the best fit was described by a sum of pure Gaussian peaks. Shoulder limit and detection limit maps were used to validate the revealed spectral features.

Identificação de alguns constituintes químicos de Indigofera hirsuta Linn. (Fabaceae) por CLAE-IES-EM (TOF) e avaliação da atividade antirradicalar

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Validação de metodologia analítica por cromatografia líquida de alta eficiência para quantificação de bupivacaína (S75-R25) em nanoesferas de poli(lactídeo-co-glicolídeo)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Molecular analysis of the Von Hippel-Lindau (VHL) gene in a family with non-syndromic pheochromocytoma: the importance of genetic testing

Dois pacientes índices da família analisada neste estudo foram submetidos a adrenalectomia bilateral devido a feocromocitoma. Foi, então, realizado o estudo genético dos pacientes e de sete parentes de primeiro grau. Os dois pacientes com feocromocitoma e dois outros membros assintomáticos da família apresentaram a mutação c496G>T no exon 3 do gene VHL. A família perdeu seguimento médico. Três anos após a realização da avaliação genética, a irmã dos pacientes, portadora da mutação, foi encaminhada para o nosso serviço após uma gestação complicada por pré-eclampsia. Ela referia paroxismos sugestivos de feocromocitoma, mas as metanefrinas urinárias eram negativas. Entretanto, a tomografia computadorizada de abdômen evidenciou uma massa adrenal que também se contrastou na cintilografia com metaiodobenzilguanidina (MIBG). Esse estudo mostra que a análise molecular do paciente índice pode levar à identificação de parentes assintomáticos portadores da mutação. Além disso, mesmo com as metanefrinas urinárias negativas, a identificação de uma mutação específica levou a um aumento da suspeita e detecção de feocromocitoma na irmã dos afetados pela doença.

IDENTIFYING THE HIGGS-BOSON IN ELECTRON-PHOTON COLLISIONS

We analyze the production and detection of the Higgs boson in the next generation of linear e+e-colliders operating in the egamma mode. In particular, we study the production mechanism e+gamma --> egammagamma --> e + H, where one photon is generated via the laser backscattering mechanism, while the other is radiated via the usual bremsstrahlung process. We show that this is the most important mechanism for Higgs boson production in a 500 GeV egamma collider for M(H) greater than or similar to 140 GeV. We also study the signals and backgrounds for detection of the Higgs boson in the different decay channels bbBAR, W+W-, and ZZ, and suggest kinematical cuts to improve the signature of an intermediate-mass Higgs boson.

Flow injection amperometric determination of procaine in pharmaceutical formulation using a screen-printed carbon electrode

A rapid and simple method for procaine determination was developed by flow injection analysis (FIA) using a screen-printed carbon electrode (SPCE) as amperometric detector. The present method is based on the amine/hydroxylamine oxidation from procaine monitored at 0.80 V on SPCE in sodium acetate solution pH 6.0. Using the best experimental conditions assigned as: pH 6.0, flow rate of 3.8 mL min(-1), sample volume of 100 mu L and analytical path of 30 cm it is possible to construct a linear calibration curve from 9.0 x 10(-6) to 1.0 x 10(-4) mol L-1. The relative standard deviation for 5.0 x 10(-5) mol L-1 procaine (15 repetitions using the same electrode) is 3.2% and detection limit calculated is 6.0 x 10(-6) mol L-1. Recoveries obtained for procaine gave a mean values from 94.8 to 102.3% and an analytical frequency of 36 injections per hour was achieved. The method was successfully applied for the determination of procaine in pharmaceutical formulation without any pre-treatment, which are in good accordance with the declared values of manufacturer and an official method based on spectrophotometric analysis. (c) 2006 Elsevier B.V. All rights reserved.

Voltammetric sensor for sodium nitroprusside determination in biological fluids using films of poly-L-lysine

Sodium nitroprusside (NP), a commercial vasodilator, can be pre-concentrated on vitreous carbon electrode modified by films of 97.5%: 2.5% Poly-L-lysine (PLL): glutaraldehyde (GA). This coating gives acceptable anion exchange properties whilst giving the required improvement of adhesion to the glassy carbon electrode surface. Linear response range and detection limit on nitroprusside in B-R buffer pH 4.0, were 1 x 10(-6) to 2 x 10-(5) mol L-1 and 1 x 10(-7) mol L-1, respectively. The repeatability of the proposed sensor, evaluated in term of relative standard deviation, was measured as 4.1% for 10 experiments. The voltammetric sensor was directly applied to determination of nitroprusside in human plasma and urine samples and the average recovery for these samples was around 95-97% without any pre treatment.

A simplified method for the determination of fenpropathrin residues in fruits

A simple and efficient method is described for the determination of fenpropathrin in oranges, pears, apples and strawberries. The procedure: is based on the extraction of each homogenized fruit sample with hexane:acetone (1:1, v/v) mixture, followed, by a cleanup technique on a column packed with florisil, using a hexane:ethyl ether (7:3, v/v) mixture, and gas chromatographic, analysis with electron capture detection (ECD). The fortification levels (0.5; 1.0; 2.0 mg kg(-1)) were selected according to the maximum residue limits (MRLs) established for fenpropathrin by Brazilian legislation. Mean recoveries from five replicates of fortified fruit samples ranged from 83 % to 98 %, with:coefficients of variation from 1.4 to 13.5 and detection limits varying from 0.1 to 0.2 mg kg(-1).

Immunization of bovines using a DNA vaccine (pcDNA3.1/MSP1b) prepared from the jaboticabal strain of Anaplasma marginale

Anaplasma is a tick-borne ehrlichial pathogen of cattle that causes the disease, anaplasmosis. In the present study, a total of 11 Anaplasma marginale seronegative calves were assigned into two groups: one immunized (G1, n = 6) and one nonimmunized-control (G2, n = 5). Six calves were immunized by using a DNA vaccine containing the gene of a major surface protein, MSP1b, encoded by the plasmid identified as pcDNA3.1/MSPIb. Calves received three intramuscular inoculations of 100 mug of pcDNA3.1/MSP1b at a 20-day interval. The control group received buffer phosphate at the same schedule as the experimental group. The immune response elicited by immunization with pcDNA3.1/MSP1b was evaluated in mice and calves. Twenty days following initial immunization, specific serum antibody from four BALB/c mice bound MSP1b in inummoblots. Sixty days after the last immunization, all calves were challenged with cryopreserved A. marginale at a dose of 10(4) parasites/mL/animal by intravenous injection. Results of packed cell volume (PCV) and detection of infected erythrocytes in all experimental groups revealed that the decrease of PCV and detection of infected erythrocytes occurred at 28 to 42 days after challenge. Mean temperature values did not increase over 39.85degreesC. Antibodies developed by immunized bovines from G2 were detected 14 days after challenge. MSP1b was characterized during the immunization period and MSP2 was the most predominant polypeptide at the challenge period. DNA of A. marginale was detected in all groups just after challenge by nested PCR assay. It can be concluded that all immunized bovines were partially protected against homologous challenge.

Screening Brazilian C gasoline quality: Application of the SIMCA chemometric method to gas chromatographic data

A total of 2400 samples of commercial Brazilian C gasoline were collected over a 6-month period from different gas stations in the São Paulo state, Brazil, and analysed with respect to 12 physicochemical parameters according to regulation 309 of the Brazilian Government Petroleum, Natural Gas and Biofuels Agency (ANP). The percentages (v/v) of hydrocarbons (olefins, aromatics and saturated) were also determined. Hierarchical cluster analysis (HCA) was employed to select 150 representative samples that exhibited least similarity on the basis of their physicochemical parameters and hydrocarbon compositions. The chromatographic profiles of the selected samples were measured by gas chromatography with flame ionisation detection and analysed using soft independent modelling of class analogy (SIMCA) method in order to create a classification scheme to identify conform gasolines according to ANP 309 regulation. Following the optimisation of the SIMCA algorithm, it was possible to classify correctly 96% of the commercial gasoline samples present in the training set of 100. In order to check the quality of the model, an external group of 50 gasoline samples (the prediction set) were analysed and the developed SIMCA model classified 94% of these correctly. The developed chemometric method is recommended for screening commercial gasoline quality and detection of potential adulteration. (c) 2007 Elsevier B.V. All rights reserved.