Proximal tibia volumetric bone mineral density is correlated to the magnitude of local acceleration in male long distance runners.

Introduction: The beneficial effect of physical exercise on bone mineral density (BMD) is at least partly explained by the forces exerted directly on the bones. Male runners present generally higher BMD than sedentary individuals. We postulated that the proximal tibia BMD is related to the running distance as well as to the magnitude of the shocks (while running) in male runners. Methods: A prospective study (three yearly measurements) included 81 healthy male subjects: 16 sedentary lean subjects and three groups of runners (5-30 km/week, n=19; 30-50 km/week, n=29; 50-100 km/week, n=17). Several measurements were performed at the proximal tibia level: volumetric BMD (vBMD), cortical index (CI) i.e. an index of cortical bone thickness and peak accelerations (an index of shocks during heel strike) while running (measured by a 3-D accelerometer). A general linear model assessed the prediction of vBMD or CI by a) simple effects (running distance, peak accelerations, time) and b) interactions (for instance if vBMD prediction by peak acceleration depends on running distance). Results: CI and vBMD a) increase with running distance to reach a plateau over 30 km/wk, b) are positively associated with peak accelerations over 30 km/week. Discussion: Running may be associated with high peak accelerations in order to have beneficial effects on BMD. More important strains are needed to be associated with the same increase in BMD during running sessions of short duration than those of long duration. Conclusion: CI and vBMD are associated with the magnitude of the shocks during heel strike in runners. Key words: Bone mineral density, strains, physical exercise, running distance.

Immigració i desafecció política a l'espai local: la instrumentalització política de la immigració a Catalunya i Gran Bretanya

El projecte ha tingut com a objectiu principal abordar la instrumentalització política de la immigració per part de partits polítics de nova extrema dreta. Aquest fenomen, que ha adquirit una gran rellevància a gran part dels països europeus, està adquirint una creixent rellevància en els casos britànic i català a partir de, entre altres coses, l'emergència electoral dels partits Plataforma per Catalunya i British National Party. En aquest sentit, el projecte ha tractat de desenvolupar una recerca que produís un conjunt de dades i coneixements que permetessin abordar de forma fonamentada un fenomen “nou” en el context català i que, fins al moment, ha rebut escassa atenció per part del món acadèmic. Dins d’aquest objectiu cal destacar el fet que la àmplia experiència de l’equip investigador britànic en l’anàlisi de la nova extrema dreta ha permès que els investigadors catalans poguessin desenvolupar la seva recerca recolzant-se i dialogant en la seva contrapart britànica. Els resultats de la recerca són certament novedosos i representaran una important contribució al coneixement d’aquest fenomen. Així, en el marc de la recerca s’han desenvolupat una sèrie d’entrevistes a membres i a votants de PxC, així com una enquesta a votants i una anàlisi agregada sobre el vot al partit. En aquest sentit, cal destacar que és la primera vegada que s’aconsegueixen aquest tipus de dades. Un fet que està fent, i farà, que la seva explotació i divulgació adquireixi una gran rellevància tant en el món acadèmic com en el de les administracions públiques. Finalment, convé ressaltar que el projecte també ha servit per consolidar la relació entre els equips d’investigació britànic i català i per impulsar la inserció de l’equip català en les xarxes europees d’investigació sobre aquesta matèria.

Chroma binary similarity and local alignment applied to cover song identification

We present a new technique for audio signal comparison based on tonal subsequence alignment and its application to detect cover versions (i.e., different performances of the same underlying musical piece). Cover song identification is a task whose popularity has increased in the Music Information Retrieval (MIR) community along in the past, as it provides a direct and objective way to evaluate music similarity algorithms.This article first presents a series of experiments carried outwith two state-of-the-art methods for cover song identification.We have studied several components of these (such as chroma resolution and similarity, transposition, beat tracking or Dynamic Time Warping constraints), in order to discover which characteristics would be desirable for a competitive cover song identifier. After analyzing many cross-validated results, the importance of these characteristics is discussed, and the best-performing ones are finally applied to the newly proposed method. Multipleevaluations of this one confirm a large increase in identificationaccuracy when comparing it with alternative state-of-the-artapproaches.

Development of Abutment Design Standards for Local Bridge Designs, Volume 1 of 3, Development of Design Methodology, August 2004

Several superstructure design methodologies have been developed for low volume road bridges by the Iowa State University Bridge Engineering Center. However, to date no standard abutment designs have been developed. Thus, there was a need to establish an easy to use design methodology in addition to generating generic abutment standards and other design aids for the more common substructure systems used in Iowa. The final report for this project consists of three volumes. The first volume (this volume) summarizes the research completed in this project. A survey of the Iowa County Engineers was conducted from which it was determined that while most counties use similar types of abutments, only 17 percent use some type of standard abutment designs or plans. A literature review revealed several possible alternative abutment systems for future use on low volume road bridges in addition to two separate substructure lateral load analysis methods. These consisted of a linear and a non-linear method. The linear analysis method was used for this project due to its relative simplicity and the relative accuracy of the maximum pile moment when compared to values obtained from the more complex non-linear analysis method. The resulting design methodology was developed for single span stub abutments supported on steel or timber piles with a bridge span length ranging from 20 to 90 ft and roadway widths of 24 and 30 ft. However, other roadway widths can be designed using the foundation design template provided. The backwall height is limited to a range of 6 to 12 ft, and the soil type is classified as cohesive or cohesionless. The design methodology was developed using the guidelines specified by the American Association of State Highway Transportation Officials Standard Specifications, the Iowa Department of Transportation Bridge Design Manual, and the National Design Specifications for Wood Construction. The second volume introduces and outlines the use of the various design aids developed for this project. Charts for determining dead and live gravity loads based on the roadway width, span length, and superstructure type are provided. A foundation design template was developed in which the engineer can check a substructure design by inputting basic bridge site information. Tables published by the Iowa Department of Transportation that provide values for estimating pile friction and end bearing for different combinations of soils and pile types are also included. Generic standard abutment plans were developed for which the engineer can provide necessary bridge site information in the spaces provided. These tools enable engineers to design and detail county bridge substructures more efficiently. The third volume provides two sets of calculations that demonstrate the application of the substructure design methodology developed in this project. These calculations also verify the accuracy of the foundation design template. The printouts from the foundation design template are provided at the end of each example. Also several tables provide various foundation details for a pre-cast double tee superstructure with different combinations of soil type, backwall height, and pile type.

Development of Abutment Design Standards for Local Bridge Designs, Volume 3 of 3, Verification of Design Methodology, August 2004

Several superstructure design methodologies have been developed for low volume road bridges by the Iowa State University Bridge Engineering Center. However, to date no standard abutment designs have been developed. Thus, there was a need to establish an easy to use design methodology in addition to generating generic abutment standards and other design aids for the more common substructure systems used in Iowa. The final report for this project consists of three volumes. The first volume summarizes the research completed in this project. A survey of the Iowa County Engineers was conducted from which it was determined that while most counties use similar types of abutments, only 17 percent use some type of standard abutment designs or plans. A literature review revealed several possible alternative abutment systems for future use on low volume road bridges in addition to two separate substructure lateral load analysis methods. These consisted of a linear and a non-linear method. The linear analysis method was used for this project due to its relative simplicity and the relative accuracy of the maximum pile moment when compared to values obtained from the more complex non-linear analysis method. The resulting design methodology was developed for single span stub abutments supported on steel or timber piles with a bridge span length ranging from 20 to 90 ft and roadway widths of 24 and 30 ft. However, other roadway widths can be designed using the foundation design template provided. The backwall height is limited to a range of 6 to 12 ft, and the soil type is classified as cohesive or cohesionless. The design methodology was developed using the guidelines specified by the American Association of State Highway Transportation Officials Standard Specifications, the Iowa Department of Transportation Bridge Design Manual, and the National Design Specifications for Wood Construction. The second volume introduces and outlines the use of the various design aids developed for this project. Charts for determining dead and live gravity loads based on the roadway width, span length, and superstructure type are provided. A foundation design template was developed in which the engineer can check a substructure design by inputting basic bridge site information. Tables published by the Iowa Department of Transportation that provide values for estimating pile friction and end bearing for different combinations of soils and pile types are also included. Generic standard abutment plans were developed for which the engineer can provide necessary bridge site information in the spaces provided. These tools enable engineers to design and detail county bridge substructures more efficiently. The third volume (this volume) provides two sets of calculations that demonstrate the application of the substructure design methodology developed in this project. These calculations also verify the accuracy of the foundation design template. The printouts from the foundation design template are provided at the end of each example. Also several tables provide various foundation details for a pre-cast double tee superstructure with different combinations of soil type, backwall height, and pile type.

Development of Abutment Design Standards for Local Bridge Designs, Volume 2 of 3, Design Manual, August 2004

Several superstructure design methodologies have been developed for low volume road bridges by the Iowa State University Bridge Engineering Center. However, to date no standard abutment designs have been developed. Thus, there was a need to establish an easy to use design methodology in addition to generating generic abutment standards and other design aids for the more common substructure systems used in Iowa. The final report for this project consists of three volumes. The first volume summarizes the research completed in this project. A survey of the Iowa County Engineers was conducted from which it was determined that while most counties use similar types of abutments, only 17 percent use some type of standard abutment designs or plans. A literature review revealed several possible alternative abutment systems for future use on low volume road bridges in addition to two separate substructure lateral load analysis methods. These consisted of a linear and a non-linear method. The linear analysis method was used for this project due to its relative simplicity and the relative accuracy of the maximum pile moment when compared to values obtained from the more complex non-linear analysis method. The resulting design methodology was developed for single span stub abutments supported on steel or timber piles with a bridge span length ranging from 20 to 90 ft and roadway widths of 24 and 30 ft. However, other roadway widths can be designed using the foundation design template provided. The backwall height is limited to a range of 6 to 12 ft, and the soil type is classified as cohesive or cohesionless. The design methodology was developed using the guidelines specified by the American Association of State Highway Transportation Officials Standard Specifications, the Iowa Department of Transportation Bridge Design Manual, and the National Design Specifications for Wood Construction. The second volume (this volume) introduces and outlines the use of the various design aids developed for this project. Charts for determining dead and live gravity loads based on the roadway width, span length, and superstructure type are provided. A foundation design template was developed in which the engineer can check a substructure design by inputting basic bridge site information. Tables published by the Iowa Department of Transportation that provide values for estimating pile friction and end bearing for different combinations of soils and pile types are also included. Generic standard abutment plans were developed for which the engineer can provide necessary bridge site information in the spaces provided. These tools enable engineers to design and detail county bridge substructures more efficiently. The third volume provides two sets of calculations that demonstrate the application of the substructure design methodology developed in this project. These calculations also verify the accuracy of the foundation design template. The printouts from the foundation design template are provided at the end of each example. Also several tables provide various foundation details for a pre-cast double tee superstructure with different combinations of soil type, backwall height, and pile type.

Testing for local adaptation in brown trout using reciprocal transplants.

ABSTRACT: BACKGROUND: Local adaptation can drive the divergence of populations but identification of the traits under selection remains a major challenge in evolutionary biology. Reciprocal transplant experiments are ideal tests of local adaptation, yet rarely used for higher vertebrates because of the mobility and potential invasiveness of non-native organisms. Here, we reciprocally transplanted 2500 brown trout (Salmo trutta) embryos from five populations to investigate local adaptation in early life history traits. Embryos were bred in a full-factorial design and raised in natural riverbeds until emergence. Customized egg capsules were used to simulate the natural redd environment and allowed tracking the fate of every individual until retrieval. We predicted that 1) within sites, native populations would outperform non-natives, and 2) across sites, populations would show higher performance at 'home' compared to 'away' sites. RESULTS: There was no evidence for local adaptation but we found large differences in survival and hatching rates between sites, indicative of considerable variation in habitat quality. Survival was generally high across all populations (55% +/- 3%), but ranged from 4% to 89% between sites. Average hatching rate was 25% +/- 3% across populations ranging from 0% to 62% between sites. CONCLUSION: This study provides rare empirical data on variation in early life history traits in a population network of a salmonid, and large-scale breeding and transplantation experiments like ours provide powerful tests for local adaptation. Despite the recently reported genetic and morphological differences between the populations in our study area, local adaptation at the embryo level is small, non-existent, or confined to ecological conditions that our experiment could not capture.

Symbolic meaning of local identity – A case study on Barcelona place brand representation

The core objective of this research process was to design an operational tool for place brand analysis. By modelling the emotional significance and the deeper-lying symbols associated to a specific place identity I expected to create a semiotic tool that could be applied, mutatis mutandis, on other similar place brands. As a field case study to develop the instrument, my choice of the research arena was Barcelona city, the capital of Catalonia Autonomous Community, Spain. Barcelona brand identity was approached in the line of the Chicago Urban Anthropology School. The research methods were designed according to the prescriptions of the urban anthropology, namely qualitative methods: in-depth interviews and discourse analysis. The final research outcome was a model summarizing a range of specific emotional values that support a place brand to position in the collective mindset and to assume a positively valued status and identity in the world order.

Extra-articular knee resection for a secondary chondrosarcoma evolving from an isolated enchondroma of the distal femur: A case report.

Introduction: Enchondromas are among the most current benign bone tumours. Malignant degeneration is extremely rare (<1%) and generally presents as a low grade chondrosarcoma. For localized grade 1 lesions, the treatment of choice is curettage. Wide excision and reconstruction is generally not necessary, unless locally advanced or more aggressive behaviour is suspected at presentation. Case report: A healthy 72 yo male presented with pain and recurrent knee joint effusion. X-rays show a classical central distal metaphyseal enchondroma of the femur associated with subtle osteolysis of the lateral condyle. MRI confirms the presence of a locally aggressive chondromatous lesion based in a classical enchondroma. Core needle biopsy revealed a grade 1 chondrosarcoma, which was in contrast to the radiological aggressiveness of the lesion. Total body CT-scan did not reveal metastatic disease. A wide resection was planned, as a high-grade lesion and joint contamination was suspected. We performed an extra-articular knee resection and reconstruction with a hinged modular total knee megaprosthesis. The definitive histology was grade 1 chondrosarcoma, the surgical margins were wide. The evolution was favourable and the patient was able to perform all his activities of daily living independently without pain at 6 weeks postop. Knee flexion reached 90°. The oncologic screening at 18 months did not show local or distant recurrence. Conclusion: Joints near a benign tumour that suddenly become symptomatic or present an effusion might indicate a malignant transformation. Wide resection and prosthetic reconstruction remains an effective treatment option even in low grade cartilaginous lesions if (1) the adjacent joint is contaminated, or (2) joint-sparing surgery would result in a severe functional impairment of the limb.

Repeated exposure to Lutzomyia intermedia sand fly saliva induces local expression of interferon-inducible genes both at the site of injection in mice and in human blood.

During a blood meal, Lutzomyia intermedia sand flies transmit Leishmania braziliensis, a parasite causing tegumentary leishmaniasis. In experimental leishmaniasis, pre-exposure to saliva of most blood-feeding sand flies results in parasite establishment in absence of any skin damages in mice challenged with dermotropic Leishmania species together with saliva. In contrast, pre-immunization with Lu. intermedia salivary gland sonicate (SGS) results in enhanced skin inflammatory exacerbation upon co-inoculation of Lu. intermedia SGS and L. braziliensis. These data highlight potential unique features of both L. braziliensis and Lu. intermedia. In this study, we investigated the genes modulated by Lu. intermedia SGS immunization to understand their potential impact on the subsequent cutaneous immune response following inoculation of both SGS and L. braziliensis. The cellular recruitment and global gene expression profile was analyzed in mice repeatedly inoculated or not with Lu. intermedia. Microarray gene analysis revealed the upregulation of a distinct set of IFN-inducible genes, an immune signature not seen to the same extent in control animals. Of note this INF-inducible gene set was not induced in SGS pre-immunized mice subsequently co-inoculated with SGS and L. braziliensis. These data suggest the parasite prevented the upregulation of this Lu. intermedia saliva-related immune signature. The presence of these IFN-inducible genes was further analyzed in peripheral blood mononuclear cells (PBMCs) sampled from uninfected human individuals living in a L. braziliensis-endemic region of Brazil thus regularly exposed to Lu. intermedia bites. PBMCs were cultured in presence or absence of Lu. intermedia SGS. Using qRT-PCR we established that the IFN-inducible genes induced in the skin of SGS pre-immunized mice, were also upregulated by SGS in PBMCs from human individuals regularly exposed to Lu. intermedia bites, but not in PBMCs of control subjects. These data demonstrate that repeated exposure to Lu. intermedia SGS induces the expression of potentially host-protective IFN-inducible genes.

Disseny i implementació en un mòdul linux encastat d’una eina de gestió local per a equips de xarxa de l'empresa W-onesys S.L.

Aquest projecte, s’ha desenvolupat en un marc empresarial, concretament al departamentR+D+i de l’empresa Wonesys S.L. de Sant Cugat del Vallès. L’empresa es dedica aldesenvolupament d’equipament per transmissions òptiques.Les eines de gestió dels equips existents, no satisfan els requeriments de l’empresa i amb aquest projecte es busca la implementació d’una eina per fer-ho. Entre les aplicacions actuals es pot trobar, per una banda, un sistema EMS (Element Management System) que ofereix interfíciegràfica d’usuari, però que requereix una infrastructura complexa per ser executada. Per l’altra banda, fins a tres interfícies diferents per connectar directament amb els equips, dues d’elles basades en protocols estàndard i una tercera que implementa un protocol propietari. Es tractad’interfícies d’intercanvi de text, per tant, la gestió mitjançant les mateixes es fa molt poc pràctica tot i no requerir cap infrastructura complexa com en el cas anterior. Una combinació de les virtuts de les anteriors són, a grans trets, els requeriments de la nova aplicació. Es volconstruir, doncs, una aplicació amb interfície gràfica d’usuari complerta que pugui ser accessible de forma senzilla utilitzant, tan sols, un terminal com a maquinari de suport.Un anàlisi del mercat il·lustra que hi ha molta disparitat en aplicacions similars. Hi ha grans diferències entre aplicacions de fabricants d’equipament i altres que només fan aplicacions per tercers.De les diverses possibilitats presentades per dur a terme la implementació, després d’un detingut anàlisi, es considera que la millor opció és el desenvolupament d’una aplicació web. Com l’aplicació ha de residir en un sistema Linux encastat, es fa un repàs del concepte ‘encastat’. Es defineix el terme i es dóna una mirada al mercat. Es descriuen i es comparen les arquitecturesARM i x86 i es relacionen amb el món encastat.Al tractar-se d’un sistema encastat amb arquitectura diferent a la d’un entorn web habitual, l’elecció de les eines representa un paper molt important, així com el procés de compilació i configuració d’eines que tradicionalment s’obtenen compilades.S’han escollit eines de programari lliure i dissenyades especialment per a entorns encastats. El patró de disseny usat pel desenvolupament de l’aplicació web és el Model View Controller, que facilita l’estructuració i un correcte manteniment de l’aplicació.La utilització de la tecnologia web resulta en una aplicació senzilla d’utilitzar, sense necessitat d’instal·lació de cap tipus per part de l’usuari i amb una interfície gràfica molt versàtil. La valoració per part dels usuaris de l’aplicació, tant treballadors de l’empresa en tasques dedesenvolupament i depuració, com clients en equips en explotació, és molt positiva. Tant és així, que sorgeixen opcions per reformular el sistema EMS per unificar interfícies i reaprofitar codi.

Cricotracheal resection for laryngeal invasion by thyroid carcinoma: our experience.

Invasion of the laryngeal framework by thyroid carcinoma requires specific surgical techniques and carries a higher rate of complications that deserve to be highlighted. We reviewed our data from 1995 to 2012 and found six patients with laryngotracheal invasion by thyroid carcinoma. All underwent total thyroidectomy and single-stage cricotracheal resection, plus anterolateral neck dissection. Three had airway obstruction that necessitated prior endoscopic debulking. None of the patients needed a tracheotomy. There were four cases of papillary carcinoma, and two cases of undifferentiated carcinoma. One patient died of complications of the procedure (anastomotic dehiscence and tracheo-innominate artery fistula). Another died 2 months after the procedure from local recurrence and aspiration pneumonia. One case presented recurrence at 15 months, which was managed by re-excision and adjuvant radiotherapy; after 26 months of follow-up, he has no evidence of locoregional recurrence. The three other patients are alive without evidence of disease at 6, 18 and 41 months, respectively. Cricotracheal resection for subglottic invasion by thyroid carcinoma is an effective procedure, but carries significant risks of complications. This could be attributed to the devascularisation of the tracheal wall due to the simultaneous neck dissection, sacrifice of the strap muscles or of a patch of oesophageal muscle layer. We advocate a sternocleidomastoid flap to cover the anastomosis. Cricotracheal resection for subglottic invasion can be curative with good functional outcomes, even for the advanced stages of thyroid cancer. Endoscopic debulking of the airway prior to the procedure avoids tracheotomy.