Characterization of lower-limbs inter-segment coordination during the take-off extension in ski jumping.

Take-off, the most important phase in ski jumping, has been primarily studied in terms of spatio-temporal parameters; little is known about its motor control aspects. This study aims to assess the inter-segment coordination of the shank-thigh and thigh-sacrum pairs using the continuous relative phase (CRP). In total 87 jumps were recorded from 33 athletes with an inertial sensor-based system. The CRP curves indicated that the thighs lead the shanks during the first part of take-off extension and that the shanks rotated faster at the take-off extension end. The thighs and sacrum first rotated synchronously, with the sacrum then taking lead, with finally the thighs rotating faster. Five characteristic features were extracted from the CRP and their relationship with jump length was tested. Three features of the shank-thigh pair and one of the thigh-sacrum pair reported a significant association with jump length. It was observed that athletes who achieved longer jumps had their thighs leading their shanks during a longer time, with these athletes also having a more symmetric movement between thighs and sacrum. This study shows that inter-segment coordination during the take-off extension is related to performance and further studies are necessary to contrast its importance with other ski jumping aspects.

RNA/DNA co-analysis from blood stains--results of a second collaborative EDNAP exercise.

A second collaborative exercise on RNA/DNA co-analysis for body fluid identification and STR profiling was organized by the European DNA Profiling Group (EDNAP). Six human blood stains, two blood dilution series (5-0.001 μl blood) and, optionally, bona fide or mock casework samples of human or non-human origin were analyzed by the participating laboratories using a RNA/DNA co-extraction or solely RNA extraction method. Two novel mRNA multiplexes were used for the identification of blood: a highly sensitive duplex (HBA, HBB) and a moderately sensitive pentaplex (ALAS2, CD3G, ANK1, SPTB and PBGD). The laboratories used different chemistries and instrumentation. All of the 18 participating laboratories were able to successfully isolate and detect mRNA in dried blood stains. Thirteen laboratories simultaneously extracted RNA and DNA from individual stains and were able to utilize mRNA profiling to confirm the presence of blood and to obtain autosomal STR profiles from the blood stain donors. The positive identification of blood and good quality DNA profiles were also obtained from old and compromised casework samples. The method proved to be reproducible and sensitive using different analysis strategies. The results of this collaborative exercise involving a RNA/DNA co-extraction strategy support the potential use of an mRNA based system for the identification of blood in forensic casework that is compatible with current DNA analysis methodology.

Integrating sexuality into gynaecological consultations: gynaecologists' perspectives

There are currently few studies exploring doctors' personal perspectives on integrating sexuality into medical consultations. This study focuses on the views of gynaecologists on introducing, or not introducing, sexuality into their work. A total of 30 semistructured interviews were conducted with gynaecologists in the French-speaking part of Switzerland. The thematic content analysis and computer-assisted lexical analysis (Alceste) on the interview transcripts highlighted four categories: perceptions and description of sexuality, patient's sexological history, training in sexology and perceived difficulties. It is observed that, above all, the 'medical dimension' characterises gynaecologists' perceptions. Of greater interest is our observation of disparities in gynaecologists' discussion of their practice, which is often the product of lay knowledge based on common sense and/or personal experience. Finally, the decision to integrate questions relating to sexuality seems to depend on non-medical factors such as the personal experience, interest or gender of the doctor.

Swiss DRGs : patient heterogeneity and hospital payments

In this paper, we analyze the prospective method of paying hospitals when the within-DRG variance is high. To avoid patients dumping, an outlier payment system is implemented. In the APDRG Swiss System, it consists in a mixture of fully prospective payments for low costs patients and partially cost-based system for high cost patients. We show how the optimal policy depends on the degree to which hospitals take patients' interest into account. A fixed-price policy is optimal when the hospital is sufficiently benevolent. When the hospital is weakly benevolent, a mixed policy solving a trade-off between rent extraction, efficiency and dumping deterrence must be preferred. Following Mougeot and Naegelen (2008), we show how the optimal combination of fixed price and partially costbased payment depends on the degree of benevolence of the hospital, the social cost of public funds and the distribution of patients severity. [Authors]

The role of stereotactic ablative radiotherapy in oncological and non-oncological clinical settings: highlights from the 7th Meeting of AIRO - Young Members Working Group (AIRO Giovani).

Stereotactic ablative radiotherapy is a modern cancer treatment strategy able to deliver highly focused radiation in one or a few fractions with a radical intent in several clinical settings. Young radiation oncologists need a constant and tailored update in this context to improve patient care in daily clinical practice. A recent meeting of AIRO Giovani (AIRO - Young Members Working Group) was specifically addressed to this topic, presenting state-of-the-art knowledge, based on the latest evidence in this field. Highlights of the congress are summarized and presented in this report, including thorough contributions of the speakers dealing with the role of stereotactic ablative radiotherapy in both oncological and non-oncological diseases, divided according to anatomical and clinical scenarios: intra-cranial settings (brain malignant primary tumors, metastases, benign tumors and functional disorders) and extra-cranial indications (lung primary tumors and metastases, thoracic re-irradiation, liver, lymph node and bone metastases, prostate cancer). With literature data discussed during the congress as a background, stereotactic ablative radiotherapy has proved to be a consolidated treatment approach in specific oncological and non-oncological scenarios, as well as a promising option in other clinical settings, requiring a further prospective validation in the near future. We herein present an updated overview of stereotactic ablative radiotherapy use in the clinic.

La competència "El treball col·laboratiu": una oportunitat per a incorporar les TIC en la didàctica universitària. Descripció de l'experiència amb la plataforma ACME (UdG) = La competencia "El trabajo colaborativo": una oportunidad para incorporar las TIC en la didáctica universitaria. Descripción de la experiencia con la plataforma ACME (UdG)

L'article és una reflexió sobre els requisits de formació dels professionals que demana la societat del coneixement. Un dels objectius més importants que ha de tenir la universitat en la societat del coneixement és la formació de professionals competents que tinguin prou eines intel·lectuals per a enfrontar-se a la incertesa de la informació, a la consciència que aquesta té una data de caducitat a curt termini i a l'ansietat que això provoca. Però, a més, també han de ser capaços de definir i crear les eines de treball amb què donaran sentit i eficàcia a aquest coneixement mudable i mutant. Per això, l'espai europeu d'ensenyament superior prioritza la competència transversal del treball col·laboratiu amb l'objectiu de promoure un aprenentatge autònom, compromès i adaptat a les noves necessitats de l'empresa del segle xxi. En aquest context, es presenta l'entorn teòric que fonamenta el treball desenvolupat a la plataforma informàtica ACME, que uneix el treball col·laboratiu i l'aprenentatge semipresencial o blended learning. Així mateix, es descriuen amb detall alguns exemples de wikis, paradigma del treball col·laboratiu, fets en assignatures impartides per la Universitat de Girona en l'espai virtual ACME

Development of Object-Oriented Design and Specifications for Iowa DOT and Urban Standards: Phase I, TR-487, 2004

Currently, individuals including designers, contractors, and owners learn about the project requirements by studying a combination of paper and electronic copies of the construction documents including the drawings, specifications (standard and supplemental), road and bridge standard drawings, design criteria, contracts, addenda, and change orders. This can be a tedious process since one needs to go back and forth between the various documents (paper or electronic) to obtain information about the entire project. Object-oriented computer-aided design (OO-CAD) is an innovative technology that can bring a change to this process by graphical portrayal of information. OO-CAD allows users to point and click on portions of an object-oriented drawing that are then linked to relevant databases of information (e.g., specifications, procurement status, and shop drawings). The vision of this study is to turn paper-based design standards and construction specifications into an object-oriented design and specification (OODAS) system or a visual electronic reference library (ERL). Individuals can use the system through a handheld wireless book-size laptop that includes all of the necessary software for operating in a 3D environment. All parties involved in transportation projects can access all of the standards and requirements simultaneously using a 3D graphical interface. By using this system, users will have all of the design elements and all of the specifications readily available without concerns of omissions. A prototype object-oriented model was created and demonstrated to potential users representing counties, cities, and the state. Findings suggest that a system like this could improve productivity to find information by as much as 75% and provide a greater sense of confidence that all relevant information had been identified. It was also apparent that this system would be used by more people in construction than in design. There was also concern related to the cost to develop and maintain the complete system. The future direction should focus on a project-based system that can help the contractors and DOT inspectors find information (e.g., road standards, specifications, instructional memorandums) more rapidly as it pertains to a specific project.

La competència "El treball col·laboratiu": una oportunitat per a incorporar les TIC en la didàctica universitària. Descripció de l'experiència amb la plataforma ACME (UdG) = La competencia "El trabajo colaborativo": una oportunidad para incorporar las TIC en la didáctica universitaria. Descripción de la experiencia con la plataforma ACME (UdG)

L'article és una reflexió sobre els requisits de formació dels professionals que demana la societat del coneixement. Un dels objectius més importants que ha de tenir la universitat en la societat del coneixement és la formació de professionals competents que tinguin prou eines intel·lectuals per a enfrontar-se a la incertesa de la informació, a la consciència que aquesta té una data de caducitat a curt termini i a l'ansietat que això provoca. Però, a més, també han de ser capaços de definir i crear les eines de treball amb què donaran sentit i eficàcia a aquest coneixement mudable i mutant. Per això, l'espai europeu d'ensenyament superior prioritza la competència transversal del treball col·laboratiu amb l'objectiu de promoure un aprenentatge autònom, compromès i adaptat a les noves necessitats de l'empresa del segle xxi. En aquest context, es presenta l'entorn teòric que fonamenta el treball desenvolupat a la plataforma informàtica ACME, que uneix el treball col·laboratiu i l'aprenentatge semipresencial o blended learning. Així mateix, es descriuen amb detall alguns exemples de wikis, paradigma del treball col·laboratiu, fets en assignatures impartides per la Universitat de Girona en l'espai virtual ACME

A Multi-Project Scheduling Procedure for Transportation Projects, Final Report, HR-339, 1993

This report proposes, that for certain types of highway construction projects undertaken by the Iowa Department of Transportation, a scheduling technique commonly referred to as linear scheduling may be more effective than the Critical Path Method scheduling technique that is currently being used. The types of projects that appear to be good candidates for the technique are those projects that have a strong linear orientation. Like a bar chart, this technique shows when an activity is scheduled to occur and like a CPM schedule it shows the sequence in which activities are expected to occur. During the 1992 construction season, the authors worked with an inlay project on Interstate 29 to demonstrate the linear scheduling technique to the Construction Office. The as-planned schedule was developed from the CPM schedule that the contractor had developed for the project. Therefore, this schedule represents what a linear representation of a CPM schedule would look like, and not necessarily what a true linear schedule would look like if it had been the only scheduling technique applied to the project. There is a need to expand the current repertoire of scheduling techniques to address those projects for which the bar chart and CPM may not be appropriate either because of the lack of control information or due to overly complex process for the actual project characteristics. The scheduling approaches used today on transportation projects have many shortcomings for properly modeling the real world constraints and conditions which are encountered. Linear project's predilection for activities with variable production rates, a concept very difficult to handle with the CPM, is easily handled and visualized with the linear technique. It is recommended that work proceed with the refinement of the method of linear scheduling described above and the development of a microcomputer based system for use by the Iowa Department of Transportation and contractors for its implementation. The system will be designed to provide the information needed to adjust schedules in a rational understandable method for monitoring progress on the projects and alerting Iowa Department of Transportation personnel when the contractor is deviating from the plan.

Information and Communication Society's Impact on Global Paper Consumption

Tämän tutkielman tavoitteena on selvittää informaatio- ja kommunikaatioyhteiskunnan vaikutusta paperin kulutukseen maailmanlaajuisesti. Tarkoituksena on löytää informaatio- ja kommunikaatioyhteiskuntaa kuvaavia mittareita, joiden avulla voidaan vertailla kehittyneitä ja kehittyviä markkina-alueita keskenään. Tutkimusongelmaan haetaan ratkaisua tutkimalla sekä kirjallisuutta että tilastoja, ja vertaamalla niitä esitettyihin teorioihin informaatio- ja kommunikaatioyhteiskunnan kehityksestä. Tutkielman avulla pyritään arvioimaan ja kuvaamaantoimintaympäristön muutoksia paperin kulutuksen suhteen pitkällä aikavälillä informaatio- ja kommunikaatioyhteiskunnan näkökulmasta.

Hiljaisen tiedon tallennusHämeen Puhelin Oy:ssä vuosina 2006-2010

Moderni liiketoiminta kohtaa uusia haasteita. Haasteiden aiheuttajia ovat mm. alenevat tuotantokustannukset ja kiihtyvä kilpailu. Jotta yritys kykenisi vastaamaan näihin moderneihin haasteisiin, sen tulee toimissaan hyödyntää tehokkaasti omat resurssit. Yrityksen suurimmat resurssit sijaitsevat henkilöstössä, heihin sitoutuneessa tiedossa. Tästä tiedosta iso osa on ns. hiljaista tietoa, jota ei voida perinteisin keinoin tallentaa. Tämä työ, tutkimus keskittyy tuon hiljaisen tiedon tallentamiseen. Tutkimuksen tavoitteena oli luoda malli, joka sisältää hiljaisen tiedon keruun, analyysin ja siirtämisen. Kokonaisuus muodostaa työkalun jolla teettävän yrityksen eläkkeelle jäävä henkilöstön hiljainen tieto tallennetaan yritykseen. Mallin lisäksi tutkimuksessa tuodaan esille aihetta koskevat erilaiset kehitysmahdollisuudet ja visiot.

Characterization of Fas (Apo-1, CD95)-Fas ligand interaction.

The death-inducing receptor Fas is activated when cross-linked by the type II membrane protein Fas ligand (FasL). When human soluble FasL (sFasL, containing the extracellular portion) was expressed in human embryo kidney 293 cells, the three N-linked glycans of each FasL monomer were found to be essential for efficient secretion. Based on the structure of the closely related lymphotoxin alpha-tumor necrosis factor receptor I complex, a molecular model of the FasL homotrimer bound to three Fas molecules was generated using knowledge-based protein modeling methods. Point mutations of amino acid residues predicted to affect the receptor-ligand interaction were introduced at three sites. The F275L mutant, mimicking the loss of function murine gld mutation, exhibited a high propensity for aggregation and was unable to bind to Fas. Mutants P206R, P206D, and P206F displayed reduced cytotoxicity toward Fas-positive cells with a concomitant decrease in the binding affinity for the recombinant Fas-immunoglobulin Fc fusion proteins. Although the cytotoxic activity of mutant Y218D was unaltered, mutant Y218R was inactive, correlating with the prediction that Tyr-218 of FasL interacts with a cluster of three basic amino acid side chains of Fas. Interestingly, mutant Y218F could induce apoptosis in murine, but not human cells.

Tietointensiivisen palvelutuotannon kehittäminen: case televiestintäyrityksen vianhallinta

Tämän tutkimuksen tavoitteena oli luoda tavoitemalli TeliaSonera Finland Oyj:n vianhallintapalveluille. Tavoitemalli tuli muodostaa niin, että se tukee laadukasta ja tuottavaa teollista palvelutuotantoa. Tavoitemalli muodostettiin suhteellisen laajan teoriakatsauksen perusteella, joka tehtiin tiedon näkökulmasta. Palvelujen hallinnan viitekehyksessä tutkittiin palvelujen suorituskykyä, jossa erityisesti paneuduttiin laatuun, tuottavuuteen ja palvelutuotannon psykososiaaliseen työympäristöön. Tähän kokonaisuuteen yhdistettiin tutkimustietoa palvelujen teollistamisesta, sekä otettiin huomioon tietointensiivisen organisaation yleiset menestystekijät. Näin muodostettiin tietointensiivisen palvelutuotannon hallinnan ja kehittämisen viitekehys, jota sovellettiin vianhallintapalvelujen tavoitetilan muodostamiseen. Vianhallinnan tavoitetila testattiinosin empiirisesti, mutta lisätutkimusta tarvitaan työssä muodostetun teoreettisen viitekehyksen arviointiin.

Verkko-opetuksenhyödyntäminen uusien työntekijöiden koulutuksen haasteisiin vastaamisessa

Työn tarkoituksena oli kehittää verkko-oppimisympäristö sahatavaran jatkojalostusprosessien uusien ja työtehtävää vaihtavien työntekijöiden perehdytykseen. Työssä tutkittiin myös miten verkko-oppimisympäristöä voidaan käyttää osaamisen siirrossa. Työssä haastateltiin työnjohtajia ja työntekijöiden perehdyttämisestä vastaavia henkilöitä siitä, mitkä ovat ongelmat ja haasteet sahatavaran jatkojalostuksen alueella tietämyksen siirrossa uusille työntekijöille. Työssä tarkasteltiin tiedon syntymistä ja siirtämistä tietojohtamisen, sekä oppivan organisaation teorioiden avulla. Työssä selvitettiin myös mitkä ovat verkko-oppimisympäristöjen vahvuudet ja heikkoudet tiedonsiirrossa, sekä miten verkko-oppimisympäristö voisi toimia osana tiedonsiirtojärjestelmää. Haasteiksi uusien työntekijöiden koulutuksessa nousi esille neljä teemaa. Ne olivat laatutietous, turvallisuus, taloudellisuus jamotivaatio oppimiseen. Verkko-oppimisen vahvuuksia pyrittiin käyttämään mahdollisimman tehokkaasti hyväksi esiin nousseisiin haasteisiin vastaamisessa. Verkko-oppimisen vahvuuksia ovat eri mediaelementtien käyttö kuten kuvat, videot ja animaatiot. Työn tuloksia käytettiin hyväksi verkko-oppimisympäristön teossa. Lopuksi tehtiin myös ehdotus verkko-oppimisympäristön käytöstä osana tiedonsiirtojärjestelmää. Järjestelmän käyttö riippuu sen sisällön hyödyllisyydestä ja jatkuvasta päivityksestä.