Assessment of the initial state of two reserves, Micro áreas Ecoturísticas Litorales (MAEL), in Gran Canaria, Canary Islands

Máster en Oceanografía

Modelli non lineari statici e dinamici su dati microeconomici: analisi delle condizioni finanziarie delle famiglie italiane

The thesis studies the economic and financial conditions of Italian households, by using microeconomic data of the Survey on Household Income and Wealth (SHIW) over the period 1998-2006. It develops along two lines of enquiry. First it studies the determinants of households holdings of assets and liabilities and estimates their correlation degree. After a review of the literature, it estimates two non-linear multivariate models on the interactions between assets and liabilities with repeated cross-sections. Second, it analyses households financial difficulties. It defines a quantitative measure of financial distress and tests, by means of non-linear dynamic probit models, whether the probability of experiencing financial difficulties is persistent over time. Chapter 1 provides a critical review of the theoretical and empirical literature on the estimation of assets and liabilities holdings, on their interactions and on households net wealth. The review stresses the fact that a large part of the literature explain households debt holdings as a function, among others, of net wealth, an assumption that runs into possible endogeneity problems. Chapter 2 defines two non-linear multivariate models to study the interactions between assets and liabilities held by Italian households. Estimation refers to a pooling of cross-sections of SHIW. The first model is a bivariate tobit that estimates factors affecting assets and liabilities and their degree of correlation with results coherent with theoretical expectations. To tackle the presence of non normality and heteroskedasticity in the error term, generating non consistent tobit estimators, semi-parametric estimates are provided that confirm the results of the tobit model. The second model is a quadrivariate probit on three different assets (safe, risky and real) and total liabilities; the results show the expected patterns of interdependence suggested by theoretical considerations. Chapter 3 reviews the methodologies for estimating non-linear dynamic panel data models, drawing attention to the problems to be dealt with to obtain consistent estimators. Specific attention is given to the initial condition problem raised by the inclusion of the lagged dependent variable in the set of explanatory variables. The advantage of using dynamic panel data models lies in the fact that they allow to simultaneously account for true state dependence, via the lagged variable, and unobserved heterogeneity via individual effects specification. Chapter 4 applies the models reviewed in Chapter 3 to analyse financial difficulties of Italian households, by using information on net wealth as provided in the panel component of the SHIW. The aim is to test whether households persistently experience financial difficulties over time. A thorough discussion is provided of the alternative approaches proposed by the literature (subjective/qualitative indicators versus quantitative indexes) to identify households in financial distress. Households in financial difficulties are identified as those holding amounts of net wealth lower than the value corresponding to the first quartile of net wealth distribution. Estimation is conducted via four different methods: the pooled probit model, the random effects probit model with exogenous initial conditions, the Heckman model and the recently developed Wooldridge model. Results obtained from all estimators accept the null hypothesis of true state dependence and show that, according with the literature, less sophisticated models, namely the pooled and exogenous models, over-estimate such persistence.

Mixed Mode Fracture Behaviour of Piezoelectric Materials

Piezoelectrics present an interactive electromechanical behaviour that, especially in recent years, has generated much interest since it renders these materials adapt for use in a variety of electronic and industrial applications like sensors, actuators, transducers, smart structures. Both mechanical and electric loads are generally applied on these devices and can cause high concentrations of stress, particularly in proximity of defects or inhomogeneities, such as flaws, cavities or included particles. A thorough understanding of their fracture behaviour is crucial in order to improve their performances and avoid unexpected failures. Therefore, a considerable number of research works have addressed this topic in the last decades. Most of the theoretical studies on this subject find their analytical background in the complex variable formulation of plane anisotropic elasticity. This theoretical approach bases its main origins in the pioneering works of Muskelishvili and Lekhnitskii who obtained the solution of the elastic problem in terms of independent analytic functions of complex variables. In the present work, the expressions of stresses and elastic and electric displacements are obtained as functions of complex potentials through an analytical formulation which is the application to the piezoelectric static case of an approach introduced for orthotropic materials to solve elastodynamics problems. This method can be considered an alternative to other formalisms currently used, like the Stroh’s formalism. The equilibrium equations are reduced to a first order system involving a six-dimensional vector field. After that, a similarity transformation is induced to reach three independent Cauchy-Riemann systems, so justifying the introduction of the complex variable notation. Closed form expressions of near tip stress and displacement fields are therefore obtained. In the theoretical study of cracked piezoelectric bodies, the issue of assigning consistent electric boundary conditions on the crack faces is of central importance and has been addressed by many researchers. Three different boundary conditions are commonly accepted in literature: the permeable, the impermeable and the semipermeable (“exact”) crack model. This thesis takes into considerations all the three models, comparing the results obtained and analysing the effects of the boundary condition choice on the solution. The influence of load biaxiality and of the application of a remote electric field has been studied, pointing out that both can affect to a various extent the stress fields and the angle of initial crack extension, especially when non-singular terms are retained in the expressions of the electro-elastic solution. Furthermore, two different fracture criteria are applied to the piezoelectric case, and their outcomes are compared and discussed. The work is organized as follows: Chapter 1 briefly introduces the fundamental concepts of Fracture Mechanics. Chapter 2 describes plane elasticity formalisms for an anisotropic continuum (Eshelby-Read-Shockley and Stroh) and introduces for the simplified orthotropic case the alternative formalism we want to propose. Chapter 3 outlines the Linear Theory of Piezoelectricity, its basic relations and electro-elastic equations. Chapter 4 introduces the proposed method for obtaining the expressions of stresses and elastic and electric displacements, given as functions of complex potentials. The solution is obtained in close form and non-singular terms are retained as well. Chapter 5 presents several numerical applications aimed at estimating the effect of load biaxiality, electric field, considered permittivity of the crack. Through the application of fracture criteria the influence of the above listed conditions on the response of the system and in particular on the direction of crack branching is thoroughly discussed.

Ruolo dei glicosaminoglicani su struttura e funzione dei crimps nei tendini e nei legamenti

The biomechanical roles of both tendons and ligaments are fulfilled by extracellular matrix of these tissues. In particular, tension is mainly transmitted and resisted by fibrous proteins (collagen, elastin), whereas compressive load is absorbed by water-soluble glycosaminoglycans (GAGs). GAGs spanning the interfibrillar spaces and interacting with fibrils also seem to play a part in transmitting and resisting tensile stresses. Apart from different functional roles and collagen array, tendons and ligaments share the same basic structure showing periodic undulations of collagen fibers or crimps. Each crimp is composed of many knots of each single fibril or fibrillar crimps. Fibrillar and fiber crimps act as shock absorbers during the initial elongation of both tendons and ligaments and assist the elastic recoil of fibrils and fibers when the tensile stress is removed. The aim of this thesis was to evaluate whether GAGs directly affect the 3D microstructural integrity of fibrillar crimp and fiber crimps in both tendons and ligaments. Achilles tendons and medial collateral ligaments of the knee from eight female Sprague-Dawley rats (90 days old) were digested with chondroitinase ABC to remove GAGs and observed under a scanning electron microscope (SEM). In addition, isolated fibrils from these tissues obtained by mechanical homogenization were analyzed by a transmission electron microscope (TEM). Both samples digested with chondroitinase ABC or mechanically disrupted still showed crimps and fibrillar crimps comparable to tissues with a normal GAGs content. All fibrils in the fibrillar crimp region always twisted leftwards, thus changing their running plane, and then sharply bent, changing their course on a new plane. These data suggest that GAGs do not affect structural integrity or fibrillar crimps functions that seem mainly related to the local fibril leftward twisting and the alternating handedness of collagen from a molecular to a supramolecular level.

Static analysis of functionally graded cylindrical and conical shells or panels using the generalized unconstrained third order theory coupled with the stress recovery

A 2D Unconstrained Third Order Shear Deformation Theory (UTSDT) is presented for the evaluation of tangential and normal stresses in moderately thick functionally graded conical and cylindrical shells subjected to mechanical loadings. Several types of graded materials are investigated. The functionally graded material consists of ceramic and metallic constituents. A four parameter power law function is used. The UTSDT allows the presence of a finite transverse shear stress at the top and bottom surfaces of the graded shell. In addition, the initial curvature effect included in the formulation leads to the generalization of the present theory (GUTSDT). The Generalized Differential Quadrature (GDQ) method is used to discretize the derivatives in the governing equations, the external boundary conditions and the compatibility conditions. Transverse and normal stresses are also calculated by integrating the three dimensional equations of equilibrium in the thickness direction. In this way, the six components of the stress tensor at a point of the conical or cylindrical shell or panel can be given. The initial curvature effect and the role of the power law functions are shown for a wide range of functionally conical and cylindrical shells under various loading and boundary conditions. Finally, numerical examples of the available literature are worked out.

Etablierung eines In-vivo-Modells zur Untersuchung der Rolle epidermaler Langerhanszellen bei der Entstehung der Transplantat-gegen-Wirt-Erkrankung nach allogener Blutstammzelltransplantation

Dendritische Zellen der Haut, wie z.B. die Langerhanszellen (LC) der Epidermis, sind potente antigenpräsentierende Zellen (APC). Nach allogener Blutstammzelltransplantation (engl.: hematopoietic stemm cell transplantation, HSCT) persistieren Empfänger-APC und können Spender-T-Zellen aktivieren. Somit spielen dendritische Zellen eine kritische Rolle bei der Initiierung von akuter Transplantat-Gegen-Wirt-Reaktion (engl.: graft-versus-host-disease, GvHD).rnIn der vorliegenden Arbeit wurde ein Modellsystem entwickelt, welches humane Haut in einem Xenotransplantationsmodell nutzt, um die Wechselwirkung dieser gewebsständigen APC mit alloreaktiven T-Zellen zu untersuchen. Dafür wurden humane Resthautpräparate von subkutanem Gewebe befreit und intraskaptulär auf immunsupprimierte NOD/LtSz-scid IL2R#-null Mäuse (NSG) transplantiert. Diesen Tieren fehlen funktionale T-, B- und NK-Zellen, und sie tolerieren somit ein xenogenes Transplantat. Im Vergleich zu anderen immundefizienten Stämmen, haben sie eine erhöhte Lebenserwartung und es ist zudem möglich humane Hämatopoese durch Stammzellgabe zu etablieren.rnPublizierte Methoden der Hauttransplantation wurden für diese Arbeit optimiert und weiterentwickelt. So konnte die Erfolgsrate von 44% auf bis zu 95% gesteigert werden. Erste Untersuchungen fokussierten den Einfluss der Wundheilung auf die Verteilung dermaler Zellpopulationen, wie z.B. CD11c positive APC, und die Population der LC in der Epidermis. Während der ersten Wochen der Wundheilung war ein vorübergehendes Verschwinden der LC aus der Epidermis zu beobachten. Im Gegensatz dazu waren CD11c positive dermale Zellen permanent detektierbar. Die zu späteren Zeitpunkten festgestellte Repopulation der Epidermis mit LC unterstützt die Hypothese einer lokalen Vorläuferzelle. Die vorgelegten Daten und die lokale proliferative Aktivität dieser Zellen unterstreichen ihre Unabhängigkeit vom peripheren Blut. Versuche, eine Depletion der LC mittels UVC-Bestrahlung zu erreichen, gelangen nicht. Auch dies spricht für das Vorhandensein eines lokalen Vorläufers.rnZur Induktion von GvHD in der transplantierten Haut wurden in vitro DC des Hautspenders generiert und damit HLA-disparate T-Zellen stimuliert. Auf diese Weise sollte eine maximale Alloreaktivität gegen das Hauttransplantat generiert werden. In allen vorgestellten Systemen ließ sich nach Infusion der T-Lymphozyten in transplantierte Tiere, eine T-Zellinduzierte inflammatorische Reaktion auslösen. Optisch war eine deutliche Rötung des Transplantats feststellbar. Diese war jedoch nur in den Proben besonders deutlich, welche T-Zellen mit vorheriger in vitro Stimulation durch DC des Hautspenders erhalten hatten. Histologisch konnten Anzeichen einer Entzündung nachgewiesen werden. Neben Akanthose und Hyperparakeratose, waren deutliche T-Zellinfiltrate detektierbar. Auch Spaltbildung und Ablösung der Epidermis, sowie vereinzelte Apoptosen der epidermalen Zellen wiesen auf eine GvHD artige Entzündung hin.rnEine weitere Beobachtung nach T-Zellgabe, war die Depletion der LC aus der Epidermis. Auch konnte durch spätere T-Zellgaben keine weitere Hautrötung ausgelöst werden. Dies belegt die Funktion der LC als primäre Zielzelle der alloreaktiven T-Zellen. Unterstrichen wird dies durch Verwendung einer LC defizienten Haut, welche keine Hautrötung oder Anzeichen einer Entzündung entwickelte.rnZusammenfassend wurde für diese Arbeit ein Modellsystem entwickelt, welches es erlaubt Untersuchungen entzündlicher Hautkrankheiten unter Berücksichtigung hautständiger APC durchzuführen. Dabei kann dieses Modell in Zukunft für die Untersuchung von APC modulierenden Agenzien genutzt werden, da präklinische Modelle für spezies-spezifische Therapien bislang fehlten. Das Entstehen einer Entzündung könnte so verhindert oder eine Behandlung ermöglicht werden.

Measurement of the e + e - pi + pi - pi + pi - cross section using initial state radiation at BABAR

One of the most precisely measured quantities in particle physics is the magnetic moment of the muon, which describes its coupling to an external magnetic field. It is expressed in form of the anomalous magnetic moment of the muon a_mu=(g_mu-2)/2 and has been determined experimentally with a precision of 0.5 parts per million. The current direct measurement and the theoretical prediction of the standard model differ by more than 3.5 standard deviations. Concerning theory, the contribution of the QED and weak interaction to a_mu can be calculated with very high precision in a perturbative approach.rnAt low energies, however, perturbation theory cannot be used to determine the hadronic contribution a^had_mu. On the other hand, a^had_mu may be derived via a dispersion relation from the sum of measured cross sections of exclusive hadronic reactions. Decreasing the experimental uncertainty on these hadronic cross sections is of utmost importance for an improved standard model prediction of a_mu.rnrnIn addition to traditional energy scan experiments, the method of Initial State Radiation (ISR) is used to measure hadronic cross sections. This approach allows experiments at colliders running at a fixed centre-of-mass energy to access smaller effective energies by studying events which contain a high-energetic photon emitted from the initial electron or positron. Using the technique of ISR, the energy range from threshold up to 4.5GeV can be accessed at Babar.rnrnThe cross section e+e- -> pi+pi- contributes with approximately 70% to the hadronic part of the anomalous magnetic moment of the muon a_mu^had. This important channel has been measured with a precision of better than 1%. Therefore, the leading contribution to the uncertainty of a_mu^had at present stems from the invariant mass region between 1GeV and 2GeV. In this energy range, the channels e+e- -> pi+pi-pi+pi- and e+e- -> pi+pi-pi0pi0 dominate the inclusive hadronic cross section. The measurement of the process e+e- -> pi+pi-pi+pi- will be presented in this thesis. This channel has been previously measured by Babar based on 25% of the total dataset. The new analysis includes a more detailed study of the background contamination from other ISR and non-radiative background reactions. In addition, sophisticated studies of the track reconstruction as well as the photon efficiency difference between the data and the simulation of the Babar detector are performed. With these auxiliary studies, a reduction of the systematic uncertainty from 5.0% to 2.4% in the peak region was achieved.rnrnThe pi+pi-pi+pi- final state has a rich internal structure. Hints are seen for the intermediate states rho(770)^0 f_2(1270), rho(770)^0 f_0(980), as well as a_1(1260)pi. In addition, the branching ratios BR(jpsi -> pi+pi-pi+pi-) and BR(psitwos -> jpsi pi+pi-) are extracted.rn

Ursachen der Anthrazyklin-induzierten Kardiotoxizität : Einfluss der individuellen genetischen Ausstattung, des oxidativen Stresses und der Metabolisierung

Doxorubizin (Dox) gehört zur Gruppe der Anthrazykline, welche seit mehreren Jahrzehnten erfolgreich gegen ein breites Spektrum an Tumoren eingesetzt wird. Neben der guten Wirksamkeit besitzt Dox jedoch auch ein sehr hohes Nebenwirkungspotential. Die wohl folgenschwerste Nebenwirkung stellt die irreversible Schädigung des Herzens dar. Zahlreiche Faktoren, wie zum Beispiel die kumulative Dox-Dosis konnten bereits mit einer erhöhten Inzidenz an kardialen Schäden in Verbindung gebracht werden. Bislang ungeklärt war jedoch die Frage, warum Patienten unterschiedlich sensibel auf die Verabreichung von Dox reagierten. rnAn dem Patientenkollektiv der Ricover60-Studie wurde der Einfluss der individuellen genetischen Ausstattung auf die Entstehung der Anthrazyklin-induzierten Herzschädigung untersucht. Alle Patienten mit Dox-induzierten Herzschäden wurden identifiziert und auf das Vorhandensein von genetischen Polymorphismen der NAD(P)H-Oxidase (CYBA, RAC2 und NCF4) und der Anthrazyklin-Transporter (MRP1 und MRP2) untersucht. Sowohl für CYBA als auch für RAC2 konnte eine Anreicherung bestimmter Genotypen (CYBA: CT/TT; RAC2: TA/AA) in der Gruppe der herzgeschädigten Patienten nachgewiesen werden. In der Multivariaten Analyse von RAC2 erreichte diese Anreicherung ein signifikantes Niveau (p=0.028). Damit konnte für diesen Polymorphismus die klinische Relevanz bestätigt werden.rnDie Ursachen der Dox-induzierten Toxizität wurden außerdem an verschiedenen Mäusestämmen und Zelllinien untersucht. Balb/c- und C57BL/6-Mäuse, die bekanntermassen unterschiedlich sensibel auf Dox reagierten, wurden mit Dox behandelt. Anschliessend wurden die Organe Herz, Leber und Blut via HPLC untersucht. Es konnte gezeigt werden, dass sich 1. die Hauptanreicherungsorte für Dox und Doxol (Balb/c: Herz und Blut versus C57BL/6: Leber), 2. die nachgewiesenen Gesamtmengen an Dox+Doxol+Doxon in den drei Organen (MengeC57BL/6 > MengeBalb/c) sowie 3. die An- und Abflutungsgeschwindigkeiten von Dox zwischen den beiden Mäusestämmen unterscheiden. Schlussendlich konnte im Vergleich zu den Balb/c-Mäusen, bei den C57BL/6-Mäusen eine stärkere kardiale Anreicherung von Dox nach der mehrmaligen Dox-Injektion nachgewiesen werden. Somit scheinen der deutlich höhere Dox-Gehalt und die längere Verweilzeit in den Herzen für die stärkere kardiale Schädigung der C57BL/6-Mäuse verantwortlich zu sein. Hingegen verlief die Art der Dox-Metabolisierung in beiden Mäusestämmen ähnlich. rnBei der Betrachtung des oxidativen Stresses konnte gezeigt werden, dass in den Herzen der C57BL/6-Mäusen ein gröβerer oxidativer Stress vorlag, als bei den Balb/c-Mäusen. Ähnlich wie bei der Ricover60-Studie ließ sich auch bei den Mäusen eine Beteiligung der NAD(P)H-Oxidase am Dox-induzierten oxidativen Stress nachweisen. rnMit der HTETOP-Zelllinie konnte gezeigt werden, dass Dox unter physiologischen Bedingungen oxidativen Stress auslösen kann. Die Art und die Konzentration der gebildeten ROS waren abhängig von der Dox-Konzentration, der Einwirkzeit und der Kompensationsfähigkeit der Zellen. Durch die Gabe von Dex ließ sich das Ausmaß des oxidativen Stresses lediglich in den Mäuseherzen reduzieren. In den HTETOP-Zellen zeigte Dex selbst stressauslösende Eigenschaften. Durch die Behandlung mit Dex / DOXY konnte gezeigt werden, dass die Hemmung der Topo IIα selbst oxidativen Stress in den HTETOP-Zellen auslöst. Jedoch scheint weder die Topo IIalpha-Hemmung, noch der Dox-induzierte oxidative Stress bei physiologischen Dox-Konzentrationen (< 1 µM) eine entscheidende Rolle für die Toxizität zu spielen. rnIn der Mikroarray-Analyse der HTETOP-Zellen konnten verschiedene Gene identifiziert werden, die in den oxidativen Stress involviert sind und die durch die Gabe von Dox differentiell reguliert werden. Durch die Komedikation mit Dex / DOXY ließen sich diese Veränderungen teilweise modulieren. rn

Measurement of the e + e - pi + pi - cross section using initial state radiation at BESIII

The future goal of modern physics is the discovery of physics beyond the Standard Model. One of the most significant hints for New Physics can be seen in the anomalous magnetic moment of the muon - one of the most precise measured variables in modern physics and the main motivation of this work. This variable is associated with the coupling of the muon, an elementary particle, to an external electromagnetic field and is defined as a = (g - 2)/2, whereas g is the gyromagnetic factor of the muon. The muon anomaly has been measured with a relative accuracy of 0.5·10-6. However, a difference between the direct measurement and the Standard Model prediction of 3.6 standard deviations can be observed. This could be a hint for the existence of New Physics. Unfortunately, it is, yet, not significant enough to claim an observation and, thus, more precise measurements and calculations have to be performed.rnThe muon anomaly has three contributions, whereas the ones from quantum electrodynamics and weak interaction can be determined from perturbative calculations. This cannot be done in case of the hadronic contributions at low energies. The leading order contribution - the hadronic vacuum polarization - can be computed via a dispersion integral, which needs as input hadronic cross section measurements from electron-positron annihilations. Hence, it is essential for a precise prediction of the muon anomaly to measure these hadronic cross sections, σ(e+e-→hadrons), with high accuracy. With a contribution of more than 70%, the final state containing two charged pions is the most important one in this context.rnIn this thesis, a new measurement of the σ(e+e-→π+π-) cross section and the pion form factor is performed with an accuracy of 0.9% in the dominant ρ(770) resonance region between 600 and rn900 MeV at the BESIII experiment. The two-pion contribution to the leading-order (LO) hadronic vacuum polarization contribution to (g - 2) from the BESIII result, obtained in this work, is computed to be a(ππ,LO,600-900 MeV) = (368.2±2.5stat±3.3sys)·10-10. With the result presented in this thesis, we make an important contribution on the way to solve the (g - 2) puzzle.

Numerical evaluation of material model and thickness effect on LSP induced residual stresses

Laser Shock Peening (LSP) is a technological process used to improve mechanical properties in metallic components. When a short and intense laser pulse irradiates a metallic surface, high pressure plasma is generated on the treated surface; elasto-plastic waves, then, propagate inside the target and create plastic strain. This surface treatment induces a deep compressive residual stresses field on the treated area and through the thickness; such compressive residual stress is expected to increase the fatigue resistance, and reduce the detrimental effects of corrosion and stress corrosion cracking.

Numerical simulations of the effects of residual stresses in adhesively bonded composite specimen

In this work the problem of performing a numerical simulation of quasi-static crack propagation within an adhesive layer of a bonded joint under Mode I loading affected by stress field changes due to thermal-chemical shrinkage induced by cure process is addressed. Secondly, a parametric study on fracture critical energy, cohesive strength and Young's modulus is performed. Finally, a particular case of adhesive layer stiffening is simulated in order to verify qualitatively the major effect.

Multimodal Registration Procedure for the Initial Spatial Alignment of a Retinal Video Sequence to a Retinal Composite Image

Accurate placement of lesions is crucial for the effectiveness and safety of a retinal laser photocoagulation treatment. Computer assistance provides the capability for improvements to treatment accuracy and execution time. The idea is to use video frames acquired from a scanning digital ophthalmoscope (SDO) to compensate for retinal motion during laser treatment. This paper presents a method for the multimodal registration of the initial frame from an SDO retinal video sequence to a retinal composite image, which may contain a treatment plan. The retinal registration procedure comprises the following steps: 1) detection of vessel centerline points and identification of the optic disc; 2) prealignment of the video frame and the composite image based on optic disc parameters; and 3) iterative matching of the detected vessel centerline points in expanding matching regions. This registration algorithm was designed for the initialization of a real-time registration procedure that registers the subsequent video frames to the composite image. The algorithm demonstrated its capability to register various pairs of SDO video frames and composite images acquired from patients.

Dual-energy computed-tomography cholangiography in potential donors for living-related liver transplantation: initial experience

To report our initial experience with dual-energy computed-tomography (CT) cholangiography in potential donors for living-related liver transplantation.

Remineralization of initial carious lesions in deciduous enamel after application of dentifrices of different fluoride concentrations

The aim of the present study was to evaluate the remineralization potential of five dentifrices with different fluoride concentrations. Initial caries lesions were created in 72 cylindrical enamel blocks from deciduous teeth. The specimens were randomly distributed among six experimental groups corresponding to six experimental periods. Each of the six volunteers carried two deciduous enamel specimens fixed in an intraoral appliance for a period of 4 weeks. They brushed their teeth and the enamel blocks at least two times a day with dentifrices containing 0 ppm (period 1), 250 ppm (period 2), and 500 ppm fluoride (period 3), respectively. A second group of volunteers (n = 6) used dentifrices with a fluoride content of 0 ppm (period 4), 1,000 ppm (period 5), or 1,500 ppm (period 6). At the end of the respective period, the mineral content was determined by transversal microradiography (TMR). The use of dentifrices containing 500 ppm fluoride (38% MR), 1,000 ppm fluoride (42% MR), and 1,500 ppm fluoride (42% MR) resulted in a statistically significant higher mineral recovery compared to the control group (0 ppm fluoride). Mineral recovery was similar after use of dentifrices containing 0 and 250 ppm fluoride (24%; 25%). It is concluded that it is possible to remineralize initial carious lesions in deciduous enamel in a similar way as it has been described for enamel of permanent teeth.