Comfort Care Rounds: A Staff Capacity-Building Initiative in Long-Term Care Homes

This article reports a pilot evaluation of Comfort Care Rounds (CCRs)-a strategy for addressing long-term care home staff's palliative and end-of-life care educational and support needs. Using a qualitative descriptive design, semistructured individual and focus group interviews were conducted to understand staff members' perspectives and feedback on the implementation and application of CCRs. Study participants identified that effective advertising, interest, and assigning staff to attend CCRs facilitated their participation. The key barriers to their attendance included difficulty in balancing heavy workloads and scheduling logistics. Interprofessional team member representation was sought but was not consistent. Study participants recognized the benefits of attending; however, they provided feedback on how the scheduling, content, and focus could be improved. Overall, study participants found CCRs to be beneficial to their palliative and end-of-life care knowledge, practice, and confidence. However, they identified barriers and recommendations, which warrant ongoing evaluation.

Regret minimisation and utility maximisation in a freight transport context

This study is the first to compare random regret minimisation (RRM) and random utility maximisation (RUM) in freight transport application. This paper aims to compare RRM and RUM in a freight transport scenario involving negative shock in the reference alternative. Based on data from two stated choice experiments conducted among Swiss logistics managers, this study contributes to related literature by exploring for the first time the use of mixed logit models in the most recent version of the RRM approach. We further investigate two paradigm choices by computing elasticities and forecasting choice probability. We find that regret is important in describing the managers’ choices. Regret increases in the shock scenario, supporting the idea that a shift in reference point can cause a shift towards regret minimisation. Differences in elasticities and forecast probability are identified and discussed appropriately.

Milling plant and soil material in plastic tubes over-estimates carbon and under-estimates nitrogen concentrations

Milling of plant and soil material in plastic tubes, such as microcentrifuge tubes, over-estimates carbon (C) and under-estimates nitrogen (N) concentrations due to the introduction of polypropylene into milled samples, as identified using Fourier-transform infra-red spectroscopy.

This study compares C and N concentrations of roots and soil milled in microcentrifuge tubes versus stainless steel containers, demonstrating that a longer milling time, greater milling intensity, smaller sample size and inclusion of abrasive sample material all increase polypropylene contamination from plastic tubes leading to overestimation of C concentrations by up to 8 % (0.08 g g(-1)).

Erroneous estimations of C and N, and other analytes, must be assumed after milling in plastic tubes and milling methods should be adapted to minimise such error.

Vulnerability and robustness of SME supply chains: An empirical study of risk and disturbance management of fresh food processors in a developing market

The aim of this paper is to analyse vulnerability and robustness of small and medium size enterprises (SMEs) supply chains and to consider contextual factors that might influence the success of their disturbance management: Risky product and business environment. By using an exploratory case study it is shown how these contextual factors attribute vulnerability sources, contribute to the robustness of a company’s performance and supply chain vulnerability, as well as how a company seeks to manage internal and external vulnerability sources. The exploratory case is based on a fresh food supply chain of a manufacturing SME operating in a developing market.
Case findings suggest that fresh food supply chains of a manufacturing SME in developing markets are prone to disruptions of their logistics and production processes due to ‘riskiness’ of fresh food products, the ‘riskiness’ of developing markets, as well as ‘riskiness’ of SMEs themselves. However, this does not necessarily indicate the vulnerability of an SME and its entire supply chain. Findings indicate that SMEs can be very successful in disturbance management by selective use of redesign strategies that aim to prevent or reduce the impact of disturbances. More precise, it is likely that an SME can achieve robust performance by employing preventive redesign strategies in managing disturbances that result from internal, company related vulnerability sources, while impact reduction strategies are likely to contribute to robust performance of an SME if used to manage disturbances that result from internal, supply chain related vulnerability sources, as well as external vulnerability sources.

Measuring and modelling air mass flow rate in the injection stretch blow moulding process

The injection stretch blow moulding process involves the inflation and stretching of a hot preform into a mould to form bottles. A critical process variable and an essential input for process simulations is the rate of pressure increase within the preform during forming, which is regulated by an air flow restrictor valve. The paper describes a set of experiments for measuring the air flow rate within an industrial ISBM machine and the subsequent modelling of it with the FEA package ABAQUS. Two rigid containers were inserted into a Sidel SBO1 blow moulding machine and subjected to different supply pressures and air flow restrictor settings. The pressure and air temperature were recorded for each experiment enabling the mass flow rate of air to be determined along with an important machine characteristic known as the ‘dead volume’. The experimental setup was simulated within the commercial FEA package ABAQUS/Explicit using a combination of structural, fluid and fluid link elements that idealize the air flowing through an orifice behaving as an ideal gas under isothermal conditions. Results between experiment and simulation are compared and show a good correlation.

How Critical Care Nurses' Role and Education Affect Organ Donation

Organ and tissue dysfunction and failure cause high mortality rates around the world. Tissue and organs transplantation is an established, cost-effective, life-saving treatment for patients with organ failure. However, there is a large gap between the need for and the supply of donor organs. Acute and critical care nurses have a central role in the organ donation process, from identifying and assessing potential donors and supporting their families to involvement in logistics. Nurses with an in-depth knowledge of donation understand its clinical and technical aspects as well as the moral and legal considerations. Nurses have a major role to play in tackling organ and tissue shortages. Such a role cannot be adequately performed if nurses are not fully educated about donation and transplant. Such education could be incorporated into mandatory training and completed by all nurses.

UV dosimetry for solar water disinfection (SODIS) carried out in different plastic bottles and bags

Solar water disinfection (SODIS) is a well-established inexpensive means of water disinfection in developing countries, but lacks an indicator to illustrate its end-point. A study of the solar UV dosage required for SODIS, in order to achieve a bacteria concentration below the detection limit for: Escherichia coli, Enterococcus spp. and Clostridium perfringens, in water in PET bottles, PE and PE/EVA bags showed disinfection to be most efficient in PE bags, with a solar UV (290–385 nm) dose of 389 kJ m−2 required. In parallel to the disinfection experiments, a range of polyoxometalate, semiconductor photocatalysis and photodegradable dye-based solar UV dosimeter indicators were tested under the same solar UV irradiation conditions. All three types of dosimeter produced indicators that largely and significantly change colour upon exposure to 389 kJ m−2 solar UV; further indicators are reported which change colour at higher doses and hence would be suitable for the less efficient SODIS containers tested. All indicators tested were robust, easy to use and inexpensive so as not to add significantly to the attractive low cost of SODIS. Furthermore, whilst semiconductor photocatalyst and photodegradable dye based indicators are disposable, one-use systems, the polyoxometalate based indicators recover colour in the dark overnight, allowing them to be reused, and hence further decreasing the cost of using indicators during the implementation of the SODIS method.

Prioritisation of citizen centric information for disaster response

In the aftermath of a disaster event, and in the absence of trained professionals, many responsibilities are taken on by uninjured citizens who are willing and able to help, such as care of the injured or search and rescue. These citizens are constrained by communications and logistics problems but are less equipped to deal with them as most often they are cut off from any coordinated assistance. The method proposed in this study would increase the survivability of those injured or trapped by a disaster event by providing a facility to allow citizens to coordinate and share information among themselves. This is facilitated by the proposed deployment and the autonomous management of an ad hoc infrastructure that liaises (OK?) directly with survivors without central control. Furthermore, as energy concerns present critical constraints to these networks, this research proposes a system of categorising information elements within the network to ensure efficient information exchange.

Effect of high temperature, biaxial stretching on the thermal and mechanical properties of HDPE/MWCNT sheet

High density polyethylene (HDPE)/multi-walled carbon nanotube (MWCNT) composites containing 4 wt% MWCNTs were prepared by melt mixing followed by compression moulding into sheet. Compression moulded sheets were heated to just below the melting temperature and biaxially stretched at ratios (SRs) of 2, 2.5 and 3.0. The effect of stretching on the thermal and mechanical properties of the sheet was studied by differential scanning calorimetry (DSC) and tensile testing. DSC results show that the crystallinity of all the stretched samples increases by approximately 13% due to strain induced crystallization. The melting temperature of the biaxially stretched samples increases only slightly while crystallization temperature is not affected. Tensile test results indicate that at a SR of 2.5 the elastic modulus of the stretched composites increases by 17.6% relative to the virgin HDPE, but the breaking strength decreases by 33%. While the elastic modulus and breaking strength of the HDPE/MWCNT samples continue to increase as SR increases they drop off after a SR of 2.5 for the virgin HDPE. This is probably due to the constraining influence of the nanotubes preventing the relaxation of polymer chains caused by adiabatic heating at high SRs. The addition of MWCNTs results in significant strain hardening during deformation. While this will lead to increased energy requirement in forming it will also result in a more stable process and the ability to produce deep draw containers with more uniform wall thickness

COP and clathrin-coated vesicle budding:different pathways, common approaches

Vesicle and tubule transport containers move proteins and lipids from one membrane system to another. Newly forming transport containers frequently have electron-dense coats. Coats coordinate the accumulation of cargo and sculpt the membrane. Recent advances have shown that components of both COP1 and clathrin-adaptor coats share the same structure and the same motif-based cargo recognition and accessory factor recruitment mechanisms, which leads to insights on conserved aspects of coat recruitment, polymerisation and membrane deformation. These themes point to the way in which evolutionarily conserved features underpin these diverse pathways.