849 resultados para High strain rate response
Resumo:
PURPOSE: To prospectively evaluate the accuracy and reliability of "freehand" posttraumatic orbital wall reconstruction with AO (Arbeitsgemeinschaft Osteosynthese) titanium mesh plates by using computer-aided volumetric measurement of the bony orbits. METHODS: Bony orbital volume was measured in 12 patients from coronal CT scan slices using OsiriX Medical Image software. After defining the volumetric limits of the orbit, the segmentation of the bony orbital region of interest of each single slice was performed. At the end of the segmentation process, all regions of interest were grouped and the volume was computed. The same procedure was performed on both orbits, and thereafter the volume of the contralateral uninjured orbit was used as a control for comparison. RESULTS: In all patients, the volume data of the reconstructed orbit fitted that of the contralateral uninjured orbit with accuracy to within 1.85 cm3 (7%). CONCLUSIONS: This preliminary study has demonstrated that posttraumatic orbital wall reconstruction using "freehand" bending and placement of AO titanium mesh plates results in a high success rate in re-establishing preoperative bony volume, which closely approximates that of the contralateral uninjured orbit.
Resumo:
Recently, we examined the spermatogenesis cycle length in two shrews species, Sorex araneus characterized by a very high metabolic rate and a polyandric mating system (sperm competition) resulting in a short cycle and Crocidura russula characterized by a much lower metabolic rate and a monogamous mating system showing a longer cycle. In this study, we investigated the spermatogenesis cycle in Neomys fodiens showing an intermediate metabolic rate. We described the stages of seminiferous epithelium according to the spermatid morphology method and we calculated the cycle length of spermatogenesis using incorporation of 5-bromodeoxyuridine into DNA of the germ cells. Twelve males were injected intraperitoneally with 5-bromodeoxyuridine, and the testes were collected. For cycle length determination, we applied a recently developed statistical method. The calculated cycle length is 8.69 days and the total duration of spermatogenesis based on 4.5 cycles is approximately 39.1 days, intermediate between the duration of spermatogenesis of S. araneus (37.6 days) and C. russula (54.5 days) and therefore congruent with both the metabolic rate hypothesis and the sperm competition hypothesis. Relative testes size of 1.4% of body mass indicates a promiscuous mating system.
Resumo:
The Murcott tangor represent 20% of the tangerines trees in São Paulo State being the second more grown. Their fruits have good acceptance in the market cause of the good characteristics presented as: size, attractive internal and external color, transport resistance, high juice rate and industry potential. It is necessary to study the behavior of others varieties, in order to amplify the diversity of tangerine industry, which show suitable characteristics to the fresh fruit market and that make possible different harvest season. Many tangerine varieties, selected from the Citrus Germplasm Bank of the do Centro Avançado de Pesquisa Tecnológica do Agronegócio de Citros "Sylvio Moreira"/IAC, belong to trials carried out in 15 places in São Paulo State. The Capão Bonito area, south-west of the state, is one of this places where the Nova tangelo, the Ortanique and the Murcott tangors are showing quite good results about their fruit qualities. This paper had as an objective to compare the fruit characteristics of the Nova tangelo, the Murcott and the Ortanique tangors grafted on two rootstocks: Rangpur lime and Cleopatra mandarin. Accordingly to the gotten results, is possible to conclude that Nova and Ortanique had shown weight, width, fruit shape and juice percent, similar to the Murcott. In compliance with the harvest season, the Nova present suitable conditions to fresh fruit market in May and June. By the other hand the Murcott fruits can be harvested in July to August and the Ortanique in August to September. For this reason, is possible extend the harvest season of this mandarin-like, from two to five month, occurring inclusive in a period out of the crop at the north hemisphere.
Resumo:
Environmentally harmful consequences of fossil fuel utilisation andthe landfilling of wastes have increased the interest among the energy producers to consider the use of alternative fuels like wood fuels and Refuse-Derived Fuels, RDFs. The fluidised bed technology that allows the flexible use of a variety of different fuels is commonly used at small- and medium-sized power plants ofmunicipalities and industry in Finland. Since there is only one mass-burn plantcurrently in operation in the country and no intention to build new ones, the co-firing of pre-processed wastes in fluidised bed boilers has become the most generally applied waste-to-energy concept in Finland. The recently validated EU Directive on Incineration of Wastes aims to mitigate environmentally harmful pollutants of waste incineration and co-incineration of wastes with conventional fuels. Apart from gaseous flue gas pollutants and dust, the emissions of toxic tracemetals are limited. The implementation of the Directive's restrictions in the Finnish legislation is assumed to limit the co-firing of waste fuels, due to the insufficient reduction of the regulated air pollutants in the existing flue gas cleaning devices. Trace metals emission formation and reduction in the ESP, the condensing wet scrubber, the fabric filter, and the humidification reactor were studied, experimentally, in full- and pilot-scale combustors utilising the bubbling fluidised bed technology, and, theoretically, by means of reactor model calculations. The core of the model is a thermodynamic equilibrium analysis. The experiments were carried out with wood chips, sawdust, and peat, and their refuse-derived fuel, RDF, blends. In all, ten different fuels or fuel blends were tested. Relatively high concentrations of trace metals in RDFs compared to the concentrations of these metals in wood fuels increased the trace metal concentrations in the flue gas after the boiler ten- to hundred-folds, when RDF was co-fired with sawdust in a full-scale BFB boiler. In the case of peat, lesser increase in trace metal concentrations was observed, due to the higher initial trace metal concentrations of peat compared to sawdust. Despite the high removal rate of most of the trace metals in the ESP, the Directive emission limits for trace metals were exceeded in each of the RDF co-firing tests. The dominat trace metals in fluegas after the ESP were Cu, Pb and Mn. In the condensing wet scrubber, the flue gas trace metal emissions were reduced below the Directive emission limits, whenRDF pellet was used as a co-firing fuel together with sawdust and peat. High chlorine content of the RDFs enhanced the mercuric chloride formation and hence the mercury removal in the ESP and scrubber. Mercury emissions were lower than theDirective emission limit for total Hg, 0.05 mg/Nm3, in all full-scale co-firingtests already in the flue gas after the ESP. The pilot-scale experiments with aBFB combustor equipped with a fabric filter revealed that the fabric filter alone is able to reduce the trace metal concentrations, including mercury, in the flue gas during the RDF co-firing approximately to the same level as they are during the wood chip firing. Lower trace metal emissions than the Directive limits were easily reached even with a 40% thermal share of RDF co-firing with sawdust.Enrichment of trace metals in the submicron fly ash particle fraction because of RDF co-firing was not observed in the test runs where sawdust was used as the main fuel. The combustion of RDF pellets with peat caused an enrichment of As, Cd, Co, Pb, Sb, and V in the submicron particle mode. Accumulation and release oftrace metals in the bed material was examined by means of a bed material analysis, mass balance calculations and a reactor model. Lead, zinc and copper were found to have a tendency to be accumulated in the bed material but also to have a tendency to be released from the bed material into the combustion gases, if the combustion conditions were changed. The concentration of the trace metal in the combustion gases of the bubbling fluidised bed boiler was found to be a summary of trace metal fluxes from three main sources. They were (1) the trace metal flux from the burning fuel particle (2) the trace metal flux from the ash in the bed, and (3) the trace metal flux from the active alkali metal layer on the sand (and ash) particles in the bed. The amount of chlorine in the system, the combustion temperature, the fuel ash composition and the saturation state of the bed material in regard to trace metals were discovered to be key factors affecting therelease process. During the co-firing of waste fuels with variable amounts of e.g. ash and chlorine, it is extremely important to consider the possible ongoingaccumulation and/or release of the trace metals in the bed, when determining the flue gas trace metal emissions. If the state of the combustion process in regard to trace metals accumulation and/or release in the bed material is not known,it may happen that emissions from the bed material rather than the combustion of the fuel in question are measured and reported.
Resumo:
In the present study, a 2-year N rate response experiment was conducted in different fields to monitor NO3-N soil profiles, N accumulation by the crop and final crop performance, in order to assess if soil NO3-N at pre-sidedressing (Pre-Sidedress Soil Nitrate Test, PSNT) is a reliable indicator for soil N availability for corn in the irrigated area served by canal d’Urgell (Lleida, Spain), and if the test can be used to separate responsive fields from non-responsive fields to sidedress N fertilizer applications. Preliminary soil N availability (N sidedress fertilizer rate + PSNT) critical levels to identify fields that need supplementary N fertilizer applications were established at ca. 300 and 210 kg NO3-N·ha–1, for PSNTrooting–zone and PSNT0–30 cm, respectively (for a yield goal of 14 t grain·ha–1).
Resumo:
Severe acute refractory respiratory failure is considered a life-threatening situation, with a high mortality of 40 to 60%. When conservative oxygenation methods fail, a lifesaving measure is the introduction of extracorporeal membrane oxygenation (ECMO). Venovenous ECMO (VV-ECMO) is a preferred modality of support for patients with refractory acute respiratory failure. Specifically, bicaval VV-ECMO is a well-recognized and validated therapy, where single or double periphery venous access is used for the insertion of two differently sized cannulas in order to achieve adequate blood oxygenation. Compared to venoarterial ECMO, in VV-ECMO, the rate of complications, such as thrombosis, bleeding, infection and ischemic events, is lower. On the other hand, the size and insertion location is an obstacle to patient mobilization. This is a considerable problem for patients where the time interval for lung recovery and the bridge to the transplantation is prolonged. To address this issue, a dual-lumen, single venovenous cannula was introduced. Here, by insertion of one single catheter in one target vessel, in a majority of cases in the right internal jugular vein, satisfactory oxygenation of the patient is achieved. In this form, the instituted VV-ECMO enables patient mobility, better physical rehabilitation and facilitates pulmonary extubation and toilet. However, relatively early, after the first short-term reports were published, a relatively high complication rate became evident. In the recent literature, the complication rate using actual commercially available double-lumen venovenous cannula ranges between 5 and 30%. These cases were mostly conjoined to the implantation phase or the early postoperative phase and vary between right heart perforation to migration of the cannula. This review focuses on complications allied to commercially available dual-lumen, single, venovenous cannula implantation, pointing out the critical segments of the implantation process and analyzing the structure of the device.
Resumo:
INTRODUCTION: Periprosthetic femur fracture (PFF) is a serious complication after total hip arthroplasty that can be treated using different internal fixation devices. However, the outcomes with curved non-locking plates with eccentric holes in this indication have not been reported previously. The objectives of this study were to determine: (1) the union rate; (2) the complication rate; (3) autonomy in a group of patients with a Vancouver type B PFF who were treated with this plate. HYPOTHESIS: Use of this plate results in a high union rate with minimal mechanical complications. MATERIALS AND METHODS: Forty-three patients with a mean age of 79 years±13 (41-98) who had undergone fixation of Vancouver type B PFF with this plate between 2002 and 2007 were included in the study. The time to union and Parker Mobility Score were evaluated. The revision-free survival (all causes) was calculated using Kaplan-Meier analysis. The average follow-up was 42 months±20 (16-90). RESULTS: Union was obtained in all patients in a mean of 2.4 months±0.6 (2-4). One patient had varus malunion of the femur. The Parker Mobility Score decreased from 5.93±1.94 (2-9) to 4.93±1.8 (1-9) (P=0.01). Two patients required a surgical revision: one for an infection after 4.5 years and one for stem loosening. The survival of the femoral stem 5 years after fracture fixation was 83.3%±12.6%. CONCLUSION: Use of a curved plate with eccentric holes for treating type B PFF led to a high union rate and a low number of fixation-related complications. However, PFF remains a serious complication of hip arthroplasty that is accompanied by high morbidity and mortality rates. LEVEL OF EVIDENCE: Retrospective study, level IV.
Resumo:
Ectopic ACTH Cushing's syndrome (EAS) is often caused by neuroendocrine tumors (NETs) of lungs, pancreas, thymus, and other less frequent locations. Localizing the source of ACTH can be challenging. A 64-year-old man presented with rapidly progressing fatigue, muscular weakness, and dyspnea. He was in poor condition and showed facial redness, proximal amyotrophy, and bruises. Laboratory disclosed hypokalemia, metabolic alkalosis, and markedly elevated ACTH and cortisol levels. Pituitary was normal on magnetic resonance imaging (MRI), and bilateral inferior petrosal sinus blood sampling with corticotropin-releasing hormone stimulation showed no significant central-to-periphery gradient of ACTH. Head and neck, thoracic and abdominal computerized tomography (CT), MRI, somatostatin receptor scintigraphy (SSRS), and (18)F-deoxyglucose-positron emission tomography (FDG-PET) failed to identify the primary tumor. (18)F-dihydroxyphenylalanine (F-DOPA)-PET/CT unveiled a 20-mm nodule in the jejunum and a metastatic lymph node. Segmental jejunum resection showed two adjacent NETs, measuring 2.0 and 0.5 cm with a peritoneal metastasis. The largest tumor expressed ACTH in 30% of cells. Following surgery, after a transient adrenal insufficiency, ACTH and cortisol levels returned to normal values and remain normal over a follow-up of 26 months. Small mid-gut NETs are difficult to localize on CT or MRI, and require metabolic imaging. Owing to low mitotic activity, NETs are generally poor candidates for FDG-PET, whereas SSRS shows poor sensitivity in EAS due to intrinsically low tumor concentration of type-2 somatostatin receptors (SST2) or to receptor down regulation by excess cortisol. However, F-DOPA-PET, which is related to amine precursor uptake by NETs, has been reported to have high positive predictive value for occult EAS despite low sensitivity, and constitutes a useful alternative to more conventional methods of tumor localization. LEARNING POINTS: Uncontrolled high cortisol levels in EAS can be lethal if untreated.Surgical excision is the keystone of NETs treatment, thus tumor localization is crucial.Most cases of EAS are caused by NETs, which are located mainly in the lungs. However, small gut NETs are elusive to conventional imaging and require metabolic imaging for detection.FDG-PET, based on tumor high metabolic rate, may not detect NETs that have low mitotic activity. SSRS may also fail, due to absent or low concentration of SST2, which may be down regulated by excess cortisol.F-DOPA-PET, based on amine-precursor uptake, can be a useful method to localize the occult source of ACTH in EAS when other methods have failed.
Resumo:
Background: Studies evaluating risk factors associated with an "aggressive" disease course in ulcerative colitis (UC) are scarce. A recent definition of "aggressive" UC incorporated the following characteristics: 1) high relapse rate, 2) need for surgery, 3) development of colorectal cancer, and 4) presence of extraintestinal manifestations (EIM). The following factors for an aggressive / disabling disease course in UC have been identified so far: age < 40 years at S140 Poster presentations UC diagnosis, pancolitis, concomitant primary sclerosing cholangitis, and deep ulcerations of the colonic mucosa. We aimed to evaluate risk factors for an "aggressive" disease course in UC patients. Methods: Data from the Swiss IBD cohort study were analyzed. Patients were recruited from university centers (80%), regional hospitals (19%), and private practices (1%). We applied the following definition for "aggressive" UC: 1) patients ever treated with TNFantagonists or calcineurin inhibitors (tacrolimus / cyclosporine), and 2) need for (procto)-colectomy. Non-normal data are presented as median and interquartile range [IQR].
Resumo:
Tässä työssä on tutkittu ammoniakin ja hiilidioksidin erottamista adsorptio prosessilla ja suunniteltiin paineen muunteluun perustuvan adsorptioprosessin (PSA) käyttöä. Työn tarkoituksena oli laskea adsorptioon perustuvan prosessin kannattavuus melamiinitehtaan poistokaasujen erotuksessa. Tätä varten työssä suunniteltiin tehdasmitta-kaavainen prosessi ja arvioitiin sen kannattavuus. Työssä mitattiin adsorptiotasapainot, joiden perusteella sovitettiin sopiva kokeellinen adsorptioisotermi. Adsorptioisotermi lisättiin simulointiohjelmaan, jonka avulla suunniteltiin kaksi vaihtoehtoista pilot laitteistoa kaasujen erottamiseksi. Toisella pilot laitteistolla saadaan mitattua vain läpäisykäyrät, mutta paremmalla versiolla saadaan myös tietoa erotettujen komponenttien puhtaudesta. Suunnittelun tärkeimpiä lähtökohtia on molempien komponenttien mahdollisimman korkea puhtaus ja talteenottoaste. Täysimittakaavainen tehdas suunniteltiin simulointiohjelmiston avulla kahdelle eri kapasiteetille ja arvioitiin niiden kustannukset ja kannattavuus. Adsorptioprosessit osoittautuivat kannattaviksi kaasuseoksen erottamisessa kummassakin tapauksessa
Resumo:
Parastomal hernia (PSH) is the most frequent long-term stoma complication with serious negative effects on quality of life. Surgical revision is often required and has a substantial morbidity and recurrence rate. The development of PSH requires revisional surgery with a substantial perioperative morbidity and high failure rate in the long-term follow-up. Prophylactic parastomal mesh insertion during stoma creation has the potential to reduce the rate of PSH, but carries the risk of early and late mesh-related complications such as infection, fibrosis, mesh shrinkage, and/or bowel erosion. We developed a new stomaplasty ring (KORING), which is easy to implant, avoids potential mesh-related complications, and has a high potential of long-term prevention of PSH. Here we describe the technique and the first use.
Resumo:
OBJECTIVES: Invasive mould infections are associated with a high mortality rate and the emergence of MDR moulds is of particular concern. Calcineurin and its chaperone, the heat shock protein 90 (Hsp90), represent an important pathway for fungal virulence that can be targeted at different levels. We investigated the antifungal activity of compounds directly or indirectly targeting the Hsp90-calcineurin axis against different mould species. METHODS: The in vitro antifungal activity of the anticalcineurin drug FK506 (tacrolimus), the Hsp90 inhibitor geldanamycin, the lysine deacetylase inhibitor trichostatin A and the Hsp70 inhibitor pifithrin-μ was assessed by the standard broth dilution method against 62 clinical isolates of Aspergillus spp. and non-Aspergillus moulds (Mucoromycotina, Fusarium spp., Scedosporium spp., Purpureocillium/Paecilomyces spp. and Scopulariopsis spp.) RESULTS: FK506 had variable antifungal activity against different Aspergillus spp. and was particularly active against Mucor spp. Geldanamycin had moderate antifungal activity against Fusarium spp. and Paecilomyces variotii. Importantly, trichostatin A had good activity against the triazole-resistant Aspergillus ustus and the amphotericin B-resistant Aspergillus terreus as well as the MDR Scedosporium prolificans. Moreover, trichostatin A exhibited synergistic interactions with caspofungin against A. ustus and with geldanamycin against Rhizopus spp. for which none of the other agents showed activity. Pifithrin-μ exhibited little antifungal activity. CONCLUSIONS: Targeting the Hsp90-calcineurin axis at different levels resulted in distinct patterns of susceptibility among different fungal species. Lysine deacetylase inhibition may represent a promising novel antifungal strategy against emerging resistant moulds.
Resumo:
The design of therapeutic cancer vaccines is aimed at inducing high numbers and potent T cells that are able to target and eradicate malignant cells. This calls for close collaboration between cells of the innate immune system, in particular dendritic cells (DCs), and cells of the adaptive immune system, notably CD4+ helper T cells and CD8+ cytotoxic T cells. Therapeutic vaccines are aided by adjuvants, which can be, for example, Toll¬like Receptor agonists or agents promoting the cytosolic delivery of antigens, among others. Vaccination with long synthetic peptides (LSPs) is a promising strategy, as the requirement for their intracellular processing will mainly target LSPs to professional antigen presenting cells (APCs), hence avoiding the immune tolerance elicited by the presentation of antigens by non-professional APCs. The unique property of antigen cross-processing and cross-presentation activity by DCs plays an important role in eliciting antitumour immunity given that antigens from engulfed dead tumour cells require this distinct biological process to be processed and presented to CD8+T cells in the context of MHC class I molecules. DCs expressing the XCR1 chemokine receptor are characterised by their superior capability of antigen cross- presentation and priming of highly cytotoxic T lymphocyte (CTL) responses. Recently, XCR1 was found to be also expressed in tissue-residents DCs in humans, with a simitar transcriptional profile to that of cross- presenting murine DCs. This shed light into the value of harnessing this subtype of XCR1+ cross-presenting DCs for therapeutic vaccination of cancer. In this study, we explored ways of adjuvanting and optimising LSP therapeutic vaccinations by the use, in Part I, of the XCLl chemokine that selectively binds to the XCR1 receptor, as a mean to target antigen to the cross-presenting XCR1+ DCs; and in Part II, by the inclusion of Q.S21 in the LSP vaccine formulation, a saponin with adjuvant activity, as well as the ability to promote cytosolic delivery of LSP antigens due to its intrinsic cell membrane insertion activity. In Part I, we designed and produced XCLl-(OVA LSP)-Fc fusion proteins, and showed that their binding to XCR1+ DCs mediate their chemoattraction. In addition, therapeutic vaccinations adjuvanted with XCLl-(OVA LSP)-Fc fusion proteins significantly enhanced the OVA-specific CD8+ T cell response, and led to complete tumour regression in the EL4-OVA model, and significant control of tumour growth in the B16.0VA tumour model. With the aim to optimise the co-delivery of LSP antigen and XCLl to skin-draining lymph nodes we also tested immunisations using nanoparticle (NP)-conjugated OVA LSP in the presence or absence of XCLl chemokine. The NP-mediated delivery of LSP potentiated the CTL response seen in the blood of vaccinated mice, and NP-OVA LSP vaccine in the presence of XCLl led to higher blood frequencies of OVA-specific memory-precursor effector cells. Nevertheless, in these settings, the addition XCLl to NP-OVA LSP vaccine formulation did not increase its antitumour therapeutic effect. In the Part II, we assessed in HLA-A2/DR1 mice the immunogenicity of the Melan-AA27L LSP or the Melan-A26. 35 AA27l short synthetic peptide (SSP) used in conjunction with the saponin adjuvant QS21, aiming to identify a potent adjuvant formulation that elicits a quantitatively and qualitatively strong immune response to tumour antigens. We showed a high CTL immune response elicited by the use of Melan-A LSP or SSP with QS21, which both exerted similar killing capacity upon in vivo transfer of target cells expressing the Melan-A peptide in the context of HLA-A2 molecules. However, the response generated by the LSP immunisation comprised higher percentages of CD8+T cells of the central memory phenotype (CD44hl CD62L+ and CCR7+ CD62L+) than those of SSP immunisation, and most importantly, the strong LSP+QS21 response was strictly CD4+T cell-dependent, as shown upon CD4 T cell depletion. Altogether, these results suggest that both XCLl and QS21 may enhance the ability of LSP to prime CD8 specific T cell responses, and promote a long-term memory response. Therefore, these observations may have important implications for the design of protein or LSP-based cancer vaccines for specific immunotherapy of cancer -- Les vacans thérapeutiques contre le cancer visent à induire une forte et durable réponse immunitaire contre des cellules cancéreuses résiduelles. Cette réponse requiert la collaboration entre le système immunitaire inné, en particulier les cellules dendrites (DCs), et le système immunitaire adaptatif, en l'occurrence les lymphocytes TCD4 hdper et CD8 cytotoxiques. La mise au point d'adjuvants et de molécules mimant un agent pathogène tels les ligands TLRs ou d'autres agents facilitant l'internalisation d'antigènes, est essentielle pour casser la tolérance du système immunitaire contre les cellules cancéreuses afin de générer une réponse effectrice et mémoire contre la tumeur. L'utilisation de longs peptides synthétiques (LSPs) est une approche prometteuse du fait que leur présentation en tant qu'antigénes requiert leur internalisation et leur transformation par les cellules dendrites (DCs, qui sont les mieux à même d'éviter la tolérance immunitaire. Récemment une sous-population de DCs exprimant le récepteur XCR1 a été décrite comme ayant une capacité supérieure dans la cross-présentation d'antigènes, d'où un intérêt à développer des vaccins ciblant les DCs exprimant le XCR1. Durant ma thèse de doctorat, j'ai exploré différentes approches pour optimiser les vaccins avec LSPs. La première partie visait à cibler les XCR1-DCs à l'aide de la chemokine XCL1 spécifique du récepteur XCR1, soit sou s la forme de protéine de fusion XCL1-OVA LSP-Fc, soit associée à des nanoparticules. La deuxième partie a consisté à tester l'association des LSPs avec I adjuvant QS21 dérivant d'une saponine dans le but d'optimiser l'internalisation cytosolique des longs peptides. Les protéines de fusion XCLl-OVA-Fc développées dans la première partie de mon travail, ont démontré leur capacité de liaison spécifique sur les XCRl-DCs associée à leur capacité de chemo-attractio. Lorsque inclues dans une mmunisation de souris porteuse de tumeurs établies, ces protéines de fusion XCL1-0VA LSP-Fc et XCLl-Fc plus OVA LSP ont induites une forte réponse CDS OVA spécifique permettant la complète régression des tumeurs de modèle EL4- 0VA et un retard de croissance significatif de tumeurs de type B16-0VA. Dans le but d'optimiser le drainage des LSPs vers es noyaux lymphatiques, nous avons également testé les LSPs fixés de manière covalente à des nanoparticules co- injectees ou non avec la chemokine XCL1. Cette formulation a également permis une forte réponse CD8 accompagnée d'un effet thérapeutique significatif, mais l'addition de la chemokine XCL1 n'a pas ajouté d'effet anti-tumeur supplémentaire. Dans la deuxième partie de ma thèse, j'ai comparé l'immunogénicité de l'antigène humain Melan A soit sous la forme d un LSP incluant un épitope CD4 et CD8 ou sous la forme d'un peptide ne contenant que l'épitope CD8 (SSP) Les peptides ont été formulés avec l'adjuvant QS21 et testés dans un modèle de souris transgéniques pour les MHC let II humains, respectivement le HLA-A2 et DR1. Les deux peptides LSP et SSP ont généré une forte réponse CD8 similaire assoc.ee a une capacité cytotoxique équivalente lors du transfert in vivo de cellules cibles présentant le peptide SSP' Cependant les souris immunisées avec le Melan A LSP présentaient un pourcentage plus élevé de CD8 ayant un Phénotype «centra, memory» (CD44h' CD62L+ and CCR7+ CD62L+) que les souris immunisées avec le SSP, même dix mois après I'immunisation. Par ailleurs, la réponse CD8 au Melan A LSP était strictement dépendante des lymphocytes CD4, contrairement à l'immunisation par le Melan A SSP qui n'était pas affectée. Dans l'ensemble ces résultats suggèrent que la chemokine XCL1 et l'adjuvant QS21 améliorent la réponse CD8 à un long peptide synthétique, favorisant ainsi le développement d'une réponse anti-tumeur mémoire durable. Ces observations pourraient être utiles au développement de nouveau vaccins thérapeutiques contre les tumeurs.
Resumo:
Universal Mobile Telecommunication System (UMTS) on Third Generation Partnership Project (3GPP) –organisaation määrittelemä matkaviestinjärjestelmä. UMTS tukee sekä piiri- että pakettikytkentäistä tiedonsiirtoa ja mahdollistaa langattoman, suurinopeuksisen Internet-yhteyden. Diplomityön tarkoituksena on kuvata Nokia Research Center:n toteuttama kolmannen sukupolven 3GPP yhteensopiva pakettikytkentäinen koejärjestelmä. Työssä on käytetty uutta lähestymistapaa protokollakehitykseen, yhdistämällä eri työkaluilla tuotettuja protokollia yhdeksi kokonaisuudeksi. Liikenteen vaihtuessa lähitulevaisuudessa suurelta osin pakettikytkentäiseksi on mietittävä keinoja palvelunlaadun takaamiseksi. Näitä keinoja tutkittiin käyttämällä työssä toteutettua koejärjestelmää testialustana. Koejärjestelmää esiteltiin useissa konferensseissa ja se toimitettiin monille teleoperaattoreille.
Resumo:
Background: TILLING (Targeting Induced Local Lesions IN Genomes) is a reverse genetic method that combines chemical mutagenesis with high-throughput genome-wide screening for point mutation detection in genes of interest. However, this mutation discovery approach faces a particular problem which is how to obtain a mutant population with a sufficiently high mutation density. Furthermore, plant mutagenesis protocols require two successive generations (M1, M2) for mutation fixation to occur before the analysis of the genotype can begin. Results: Here, we describe a new TILLING approach for rice based on ethyl methanesulfonate (EMS) mutagenesis of mature seed-derived calli and direct screening of in vitro regenerated plants. A high mutagenesis rate was obtained (i.e. one mutation in every 451 Kb) when plants were screened for two senescence-related genes. Screening was carried out in 2400 individuals from a mutant population of 6912. Seven sense change mutations out of 15 point mutations were identified. Conclusions: This new strategy represents a significant advantage in terms of time-savings (i.e. more than eight months), greenhouse space and work during the generation of mutant plant populations. Furthermore, this effective chemical mutagenesis protocol ensures high mutagenesis rates thereby saving in waste removal costs and the total amount of mutagen needed thanks to the mutagenesis volume reduction.