876 resultados para Ground supported slabs
Resumo:
This report describes the outcome of the first visit to Tanzania, within the project "Mini-grids supplied by renewable energy - improving technical and social feasibility". The trip included visits to three different organizations; Ihushi Development Center (IDC) near Mwanza, TIDESO near Bukoba, and Mavuno Project in Karagwe. At IDC, a brief evaluation of the current power system was done and measuring equipment for long term measurements were installed. At all three locations investigations regarding the current and future electricity demand were conducted and connections to people relevant to the study were established. The report is including as well some technical specifications as some observations regarding organization and management of the technical systems. The trip was including only short visits and therefore only brief introductions to the different organizations, based on observations done by the author. The report is hence describing the author’s understanding of the technical system and social structures after only short visits to each of the organizations, and may differ from observations done at another point in time, over a different time period, or by some other person.This report describes the outcome of the first visit to Tanzania, within the project "Mini-grids supplied by renewable energy - improving technical and social feasibility". The trip included visits to three different organizations; Ihushi Development Center (IDC) near Mwanza, TIDESO near Bukoba, and Mavuno Project in Karagwe. At IDC, a brief evaluation of the current power system was done and measuring equipment for long term measurements were installed. At all three locations investigations regarding the current and future electricity demand were conducted and connections to people relevant to the study were established. The report is including as well some technical specifications as some observations regarding organization and management of the technical systems. The trip was including only short visits and therefore only brief introductions to the different organizations, based on observations done by the author. The report is hence describing the author’s understanding of the technical system and social structures after only short visits to each of the organizations, and may differ from observations done at another point in time, over a different time period, or by some other person.
Resumo:
This master thesis presents a new technological combination of two environmentally friendly sources of energy in order to provide DHW, and space heating. Solar energy is used for space heating, and DHW production using PV modules which supply direct current directly to electrical heating elements inside a water storage tank. On the other hand a GSHP system as another source of renewable energy provides heat in the water storage tank of the system in order to provide DHW and space heating. These two sources of renewable energy have been combined in this case-study in order to obtain a more efficient system, which will reduce the amount of electricity consumed by the GSHP system.The key aim of this study is to make simulations, and calculations of the amount ofelectrical energy that can be expected to be produced by a certain amount of PV modules that are already assembled on a house in Vantaa, southern Finland. This energy is then intended to be used as a complement to produce hot water in the heating system of the house beside the original GSHP system. Thus the amount of electrical energy purchased from the grid should be reduced and the compressor in the GSHP would need fewer starts which would reduce the heating cost of the GSHP system for space heating and providing hot water.The produced energy by the PV arrays in three different circuits will be charged directly to three electrical heating elements in the water storage tank of the existing system to satisfy the demand of the heating elements. The excess energy can be used to heat the water in the water storage tank to some extent which leads to a reduction of electricity consumption by the different components of the GSHP system.To increase the efficiency of the existing hybrid system, optimization of different PV configurations have been accomplished, and the results are compared. Optimization of the arrays in southern and western walls shows a DC power increase of 298 kWh/year compared with the existing PV configurations. Comparing the results from the optimization of the arrays on the western roof if the intention is to feed AC power to the components of the GSHP system shows a yearly AC power production of 1,646 kWh.This is with the consideration of no overproduction by the PV modules during the summer months. This means the optimized PV systems will be able to cover a larger part of summer demand compared with the existing system.
Resumo:
Recent developments in the field of ultracold gases has led to the production of degenerate samples of polar molecules. These have large static electric-dipole moments, which in turn causes the molecules to interact strongly. We investigate the interaction of polar particles in waveguide geometries subject to an applied polarizing field. For circular waveguides, tilting the direction of the polarizing field creates a periodic inhomogeneity of the interparticle interaction. We explore the consequences of geometry and interaction for stability of the ground state within the Thomas-Fermi model. Certain combinations of tilt angles and interaction strengths are found to preclude the existence of a stable Thomas-Fermi ground state. The system is shown to exhibit different behavior for quasi-one-dimensional and three-dimensional trapping geometries.
Resumo:
Introduction: Based on randomised controlled trials, evidence exists that early supported discharge (ESD) from the hospital with continued rehabilitation at home has beneficial effects after stroke; however, the effects of ESD service in regular clinical practice have not been investigated. The purpose of the current study was to compare ESD service with conventional rehabilitation in terms of patient outcomes, caregiver burden at 3 and 12 months and the use and costs of healthcare during the first year after stroke. Material and methods: This study was a subgroup analysis of a longitudinal observational study of patients who received care in the stroke unit at Karolinska University Hospital in Sweden. Patients who met the inclusion criteria for ESD in previous experimental studies were included. The patients were referred to available rehabilitation services at discharge, and comparisons between those who received ESD service (the ESD group, n = 40) and those who received conventional rehabilitation (the NoESD group, n = 110) were performed with regard to independence in activities of daily living (ADL), the frequency of social activities, life satisfaction, and caregiver burden and the use and costs of healthcare during the first year after stroke. Results: At 3 and 12 months, no differences were observed with regard to patient outcomes; however, ESD was associated with a lower caregiver burden (p = 0.01) at 12 months. The initial length of stay (LOS) at the hospital was 8 days for the ESD group and 15 days for the NoESD group (p = 0.02). The median number of outpatient rehabilitation contacts was 20.5 for the ESD group (81% constituting ESD service) and 3 for the NoESD group (p<0.001). There was no difference between the groups with regard to overall healthcare costs. Conclusions: ESD service in usual clinical practice renders similar health benefits as conventional rehabilitation but a different pattern of resource use and with released capacity in acute stroke care.
Resumo:
Now 40, Colby’s Environmental Studies Program is growing exponentially, equipping students to tackle real-world problems.
Resumo:
We outline possible actions to be adopted by the European Union to ensure a better share of total coffee revenues to producers in developing countries. The way to this translates, ultimately, in producers receiving a fair price for the commodity they supply, i.e., a market price that results from fair market conditions in the whole coffee producing chain. We plead for proposals to take place in the consuming countries, as market conditions in the consuming-countries side of the coffee producing chain are not fair; market failures and ingenious distortions are responsible for the enormous asymmetry of gains in the two sides. The first of three proposals for consumer government supported actions is to help in the creation of domestic trading companies for achieving higher export volumes. These tradings would be associated to roasters that, depending on the final product envisaged, could perform the roasting in the country and export the roasted – and sometimes ground – coffee, breaking the increasing importers-exporters verticalisation. Another measure would be the systematic provision of basic intelligence on the consuming markets. Statistics of the quantities sold according to mode of consumption, by broad “categories of coffee” and point of sale, could be produced for each country. They should be matched to the exports/imports data and complemented by (aggregate) country statistics on the roasting sector. This would extremely help producing countries design their own market and producing strategies. Finally, a fund, backed by a common EU tax on roasted coffee – created within the single market tax harmonisation programme, is suggested. This European Coffee Fund would have two main projects. Together with the ICO, it would launch an advertising campaign on coffee in general, aimed at counterbalancing the increasing “brandification” of coffee. Basic information on the characteristics of the plant and the drink would be passed, and the effort could be extended to the future Eastern European members of the Union, as a further assurance that EU processors would not have a too privileged access to these new markets. A quality label for every coffee sold in the Union could complement this initiative, helping to create a level playing field for products from outside the EU. A second project would consist in a careful diversification effort, to take place in selected producing countries.
Resumo:
Este estudo tem por finalidade identificar perspectiva dos profissionais de Recursos Humanos a correlação entre as competências gerenciais e a relação construída entre líderes de diferentes níveis hierárquicos e suas equipes diretas, bem como o impacto na percepção da pressão e do estresse pelas suas respectivas equipes. Um dos desafios que gerentes e outros líderes encontram é como manter um time motivado e mobilizado em um ambiente de pressão crescente, seja decorrente de uma expansão ou uma retração do seu mercado. No primeiro capítulo e no segundo capítulos fazemos a introdução e a definição do Problema, os objetivos e delimitações do estudo. No terceiro capítulo caminhamos pela história do trabalho, da organização e do homem, buscando fundamentar no tempo a jornada em busca do equilíbrio trabalho e trabalhador, o lugar do homem na construção desta história e alguns importantes pensadores da gestão de pessoas. Este capítulo abre portas para entendermos o capítulo seguinte, no qual estudamos o estresse e, em particular, o estresse ocupacional. Mostramos, ainda, a diferença entre pressão – que está no ambiente externo- e estresse, que deriva da percepção do indivíduo. O interesse neste tema é decorrente da constatação prática de que a pressão aumenta em tempos de retração do mercado, mas também aumenta em períodos em o mercado está aquecido. Logo, se houver uma correlação entre como uma equipe ou um liderado ‘percebe’ o seu líder, essa informação poderá ser útil para a Gestão de Pessoas. Aprofundamos o conceito de Suporte Social, a rede que protege o colaborador nem contextos de alta pressão e demos maior ênfase ao papel do líder como importante fonte deste suporte. No quinto capítulo analisamos o tema conflito por ser um dos temas que mais impactam o estresse ocupacional. As relações de trabalho são, por sua natureza, relações de longo prazo, o que faz do manejo adequado do conflito no ambiente de trabalho um assunto relevante na agenda do gerente. Entretanto, seu manejo adequado depende tanto do diagnóstico correto, bem como da relação de confiança construída pelo líder. Embora cientes de que parte significativa dos conflitos está relacionada às estruturas e estratégias corporativas, propositalmente dirigimos nossa atenção aos gerentes e líderes que compõem a massa de liderança dessas organizações visando provocar idéias que possam contribuir para a melhoria das relações e dos resultados. No sexto capitulo apresentamos a Metodologia e no último capítulo apresentamos e discutimos o resultado da pesquisa realizada com profissionais de Recursos Humanos de grandes empresas, buscando, através do olhar do RH, uma percepção sobre as lideranças de cada empresa e a comparação entre líderes com maior ou menor capacidade de negociação junto à sua equipe. O estudo usou uma grade flexível suportada por um questionário semi-estruturado e os dados foram tratados usando a metodologia da Análise de Conteúdo sem que fosse necessário um tratamento estatístico devido ao tamanho da amostra. O estudo apontou para a necessidade de uma exploração mais profunda do tema uma vez que a literatura e os resultados iniciais demonstraram um importante papel da chefia direta na percepção grupal do estresse e no clima organizacional. Ao concluir o trabalho a pesquisa oferece algumas ponderações sobre o papel das lideranças e o papel das corporações na equalização de equipes que vivem sob pressão constante.
Resumo:
In geophysics there are several steps in the study of the Earth, one of them is the processing of seismic records. These records are obtained through observations made on the earth surface and are useful for information about the structure and composition of the inaccessible parts in great depths. Most of the tools and techniques developed for such studies has been applied in academic projects. The big problem is that the seismic processing power unwanted, recorded by receivers that do not bring any kind of information related to the reflectors can mask the information and/or generate erroneous information from the subsurface. This energy is known as unwanted seismic noise. To reduce the noise and improve a signal indicating a reflection, without losing desirable signals is sometimes a problem of difficult solution. The project aims to get rid of the ground roll noise, which shows a pattern characterized by low frequency, low rate of decay, low velocity and high amplituds. The Karhunen-Loève Transform is a great tool for identification of patterns based on the eigenvalues and eigenvectors. Together with the Karhunen-Loève Transform we will be using the Singular Value Decomposition, since it is a great mathematical technique for manipulating data
Resumo:
The L-dopa is the immediate precursor of the neurotransmitter dopamine. Unlike dopamine, L-dopa easily enters the central nervous system and is used in the treatment of Parkinson's disease. A sensitive and selective method is presented for the voltammetric determination of L-dopa in pharmaceutical formulations using a carbon paste electrode modified with trinuclear ruthenium ammine complex [(NH3)(5)Ru-III-O-Ru-IV(NH3)(4)-O-Ru-III(NH3)(5)](6+) (Ru-red) incorporated in NaY zeolite. The parameters which influence on the electrode response (paste composition, potential scan rate, pH and interference) were also investigated. The optimum conditions were found to an electrode composition (m/m) of 25% zeolite containing 6.7% Ru, 50% graphite and 25% mineral oil in acetate buffer at pH 4.8. Voltammetric peak currents showed a linear response for L-dopa concentration in the range between 1.2 x 10(-4) and 1.0 x 10(-2) Mol l(-1) (r = 0.9988) with a detection limit of 8.5 x 10(-5) mol l(-1). The variation coefficient for a 1.0 x 10(-3) mol l(-1) L-dopa (n = 10) was 5.5%. The results obtained for L-dopa in pharmaceutical formulations (tablet) was in agreement with compared official method. In conclusion, this study has illustrated that the proposed electrode modified with Ru-red incorporated zeolite is suitable valuable for selective measurements of L-dopa. (C) 2004 Elsevier B.V. All rights reserved.
Resumo:
The aim of the present study was to determine feed intake and average weight gain and to evaluate the ruminal morphologic characteristics of Saanen kids slaughtered at 30, 45 and 60 days of age, according to a completely randomized design. Thirty-six non-castrated male Saanen kids were fed ground total ration, pelleted total ration, or extruded total ration. Feed intake and refusals were controlled daily and the animals were weighed at birth and then once a week. Newborn kids received a milk replacer and were weaned at 45 days. Immediately after slaughter, the animals were eviscerated, the entire digestive apparatus was removed from the carcass. The reticulo-rumen was separated, emptied, washed and weighed. Samples were collected from the dorsal sac, pillar area and ventral sac of the rumen, fixed for about 24h in Bouin's solution, dehydrated, embedded in Histosec and cut into 5 mu m sections. Results showed that dry matter intake (DMI) at weaning and post-weaning and weight gain were higher (P < 0.05) in animals that received the pelleted total ration. The weight of the reticulo-rumen accompanied body development and was heavier in these animals. Histologically, after weaning ruminal papillae were more developed in animals that received pelleted total ration. Length of papillae increased with increase of age. The ratio of papillary height to papillary width increased with age in the ventral sac and until weaning (P > 0.05). We conclude that the pelleting process of the total ration favored increased intake, with a 46.7% increase in weight gain and increase in rumen weight and papillae length, suggesting that best results are obtained with this processing. In general, no difference was observed between the results obtained with extruded and ground total ration, although animals fed extruded total ration showed an increase in rumen weight and papillae width. (c) 2004 Elsevier B.V All rights reserved.
Resumo:
The aim of the study was to evaluate the production of four tomato cultivars of determinate growth, in the field, with and without ground cover. The cultivars examined were: 'AP-533', 'AP-529', 'Hypeel 5131 and 'PS-41816', which were cultivated with a spacing of 1 m between rows and 0.4 m between plants. The experimental design utilized was that of subdivided parcels, where parcels were provided with and without a ground cover of black polyethylene, and subparcels consisted of the cultivars; eight repetitions were used. The eight central plants in the parcel were evaluated according to the following characteristics: fresh weight of fruit per plant and number of fruit per plant, separated by size. For the classification of fruit, the same plants were divided into classes based on the diameter of the fruit. The diameter size was as follows: class 1, 3 cm; class II, 4 cm; class III, 4.5 cm; and class IV, 5.5 cm. The results showed that there were no significant differences in production among the cultivars studied. Cultivars 'AP-533' and 'Hypeel 513' demonstrated greater production per plant, when ground cover was used, yielding 1474 and 1404 g/plant, respectively. When black polyethylene ground cover was not used, these cultivars produced 1258 and 1271 g of fruit per plant, respectively. The cultivars 'AP-529' and 'PS41818' showed a greater yield of fruit when cultivated without ground cover, with 1548 and 1663 g/plant, respectively. The cultivar 'Hypeel 513' had the highest percentage of fruit with the largest dimensions. An interaction was appeared between 'AP-529' and ground cover, where the production of this cultivar was lower with black polyethylene ground cover compared to bare ground. It is concluded that there are no significant differences in the cultivation of the tomato hybrids 'AP-533', 'Hypeel 513' and 'PS-41816' with and without ground cover, but that the cultivar 'AP-529' should be planted preferentially in soil without black polyethylene cover.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)