Nutritional quality of some food fish

The proximate compositions and amino acid make-up of silver jew fish (Johnius argentatus), Indian halibut (Psettodes erumei), grey mullet (Mugil cephalus) and pearl spot (Etroplus suratensis) are reported. Calorific values of these fishes have been calculated from their proximate compositions and their amino acid make-up compared with the available data for beef and egg. From the study, pearl spot is adjudged to be the most nutritive among the fishes studied, followed by Indian halibut, grey mullet and silver jew fish.

Observation on the lunar and tidal influence on gill netting in the Bay of Bengal

The effect of lunar and tidal influence on the landing of pelagic fish with drift gill nets has been studied for the first time from Bay of Bengal along the Orissa coast. The catchability of the gear was highest during the first quarter and lowest in the fourth quarter of the moon. The variation in catch rates during the four different quarters was not statistically significant. Contrary to the earlier belief, landing with gill net was not poor during the moonlit nights. The extensive use of bluish grey nylon twine matching with seawater in place of indigenous hemp or cotton twine, has largely eliminated the visibility of gear during the brighter phase of the moon. The rate of exploitation was found to be significantly higher during the nights of neap tide, compared to those of spring tide. A plausible explanation for this phenomenon has been offered.

Coloured gill nets for reservoir fishing

Experimental fishing with different coloured nets has shown that white net yields better catch. The efficiency of the coloured nets was in the order yellow, grey, green and blue. Though there is little evidence to show some species preference to a particular colour, the results were not conclusive as the analysis of variance indicated that interaction between species and colour is significant only at 5% level.

Overview of the marine fish hatchery industry in Taiwan

Although fish culture itself is an age-old tradition in Taiwan, it was in the 1960s that the first successes on artificial propagation were achieved, with several species of Chinese carps and tilapias. The first marine fish to be bred in captivity was the grey mullet; it was first induced to spawn in 1968. Various other species have since been added to the list of propagated marine fish. The characteristics of the marine fish hatchery industry in Taiwan are outlined, considering both the outdoor pond and indoor tank systems. Future prospects are very good; Taiwan now exports marine fish larvae and fingerlings to many of its Asian neighbours and there are some 60 marine fish species for which commercial larval production is possible.

Measurement of liquid film thickness by optical fluorescence and its application to an oscillating piston positive displacement flowmeter

The movement of the circular piston in an oscillating piston positive displacement flowmeter is important in understanding the operation of the flowmeter, and the leakage of liquid past the piston plays a key role in the performance of the meter. The clearances between the piston and the chamber are small, typically less than 60 νm. In order to measure this film thickness a fluorescent dye was added to the water passing through the meter, which was illuminated with UV light. Visible light images were captured with a digital camera and analysed to give a measure of the film thickness with an uncertainty of less than 7%. It is known that this method lacks precision unless careful calibration is undertaken. Methods to achieve this are discussed in the paper. The grey level values for a range of film thicknesses were calibrated in situ with six dye concentrations to select the most appropriate one for the range of liquid film thickness. Data obtained for the oscillating piston flowmeter demonstrate the value of the fluorescence technique. The method is useful, inexpensive and straightforward and can be extended to other applications where measurement of liquid film thickness is required. © 2011 IOP Publishing Ltd.

DT-MRI data visualisation using the dual tree Complex Wavelet transform

In this paper a novel visualisation method for diffusion tensor MRI datasets is introduced. This is based on the use of Complex Wavelets in order to produce "stripy" textures which depict the anisotropic component of the diffusion tensors. Grey-scale pixel intensity is used to show the isotropic component. This paper also discusses enhancements of the technique for 3D visualisation. © 2004 IEEE.

Ultrafast switching liquid crystals for electro-optic transmissive and reflective displays and microscopic lasers

We report on novel liquid crystals with extremely large flexoelectric coefficients in a range of ultra-fast photonic modes, namely 1) the uniform lying helix, that leads to in-plain switching, birefringence phase devices with 100 μs switching times at low fields, i.e.2-5 V/μm, and analogue or grey scale capability, 2) the uniform standing helix, using planar surface alignment and in-plane fields, with sub ms response times and optical contrasts in excess of 5000:1 with a perfect optically isotropic or black "off state", 3) the wide temperature range blue phase that leads to field controlled reflective color, 4) chiral nematic optical reflectors electric field tunable over a wide wavelength range and 5) high slope efficiency, wide wavelength range tunable narrow linewidth microscopic liquid crystal lasers. © 2011 Materials Research Society.

Reversible CO2 absorption by the 6H perovskite Ba 4Sb2O9

A novel compound for carbon capture and storage (CCS) applications, the 6H perovskite Ba4Sb2O9, was found to be able to absorb CO2 through a chemical reaction at 873 K to form barium carbonate and BaSb2O6. This absorption was shown to be reversible through the regeneration of the original Ba4Sb 2O9 material upon heating above 1223 K accompanied by the release of CO2. A combined synchrotron X-ray diffraction, thermogravimetric, and microscopy study was carried out to characterize first the physical absorption properties and then to analyze the structural evolution and formation of phases in situ. Importantly, through subsequent carbonation and regeneration of the material over 100 times, it was shown that the combined absorption and regeneration reactions proceed without any significant reduction in the CO2 absorption capacity of the material. After 100 cycles the capacity of Ba4Sb2O9 was ∼0.1 g (CO 2)/g (sorbent), representing 73% of the total molar capacity. This is the first report of a perovskite-type material showing such good properties, opening the way for studies of new classes of inorganic oxide materials with stable and flexible chemical compositions and structures for applications in carbon capture. © 2013 American Chemical Society.

Revealing lithium-silicide phase transformations in nano-structured silicon-based lithium ion batteries via in situ NMR spectroscopy.

Nano-structured silicon anodes are attractive alternatives to graphitic carbons in rechargeable Li-ion batteries, owing to their extremely high capacities. Despite their advantages, numerous issues remain to be addressed, the most basic being to understand the complex kinetics and thermodynamics that control the reactions and structural rearrangements. Elucidating this necessitates real-time in situ metrologies, which are highly challenging, if the whole electrode structure is studied at an atomistic level for multiple cycles under realistic cycling conditions. Here we report that Si nanowires grown on a conducting carbon-fibre support provide a robust model battery system that can be studied by (7)Li in situ NMR spectroscopy. The method allows the (de)alloying reactions of the amorphous silicides to be followed in the 2nd cycle and beyond. In combination with density-functional theory calculations, the results provide insight into the amorphous and amorphous-to-crystalline lithium-silicide transformations, particularly those at low voltages, which are highly relevant to practical cycling strategies.

The neural signature of escalating frustration in humans.

Mammalian studies show that frustration is experienced when goal-directed activity is blocked. Despite frustration's strongly negative role in health, aggression and social relationships, the neural mechanisms are not well understood. To address this we developed a task in which participants were blocked from obtaining a reward, an established method of producing frustration. Levels of experienced frustration were parametrically varied by manipulating the participants' motivation to obtain the reward prior to blocking. This was achieved by varying the participants' proximity to a reward and the amount of effort expended in attempting to acquire it. In experiment 1, we confirmed that proximity and expended effort independently enhanced participants' self-reported desire to obtain the reward, and their self-reported frustration and response vigor (key-press force) following blocking. In experiment 2, we used functional magnetic resonance imaging (fMRI) to show that both proximity and expended effort modulated brain responses to blocked reward in regions implicated in animal models of reactive aggression, including the amygdala, midbrain periaqueductal grey (PAG), insula and prefrontal cortex. Our findings suggest that frustration may serve an energizing function, translating unfulfilled motivation into aggressive-like surges via a cortical, amygdala and PAG network.

Evidence of print gap airflow affecting web printing quality

The current study extends our earlier investigation on the real-time dynamics of print gap airflow around a single jetted drop over a moving substrate. In the present work, simulated web press printing was performed using a stationary grey-scale commercial inkjet print head to print full-width block of solid colour images onto a paper substrate with extended print gaps. The resultant printed images exhibit patterns or 'wood-graining' effects which become more prevalent as the relevant Reynolds number (Re) increases. The high-resolution scans of the printed images revealed that the patterns are created by oscillation and coalescence of neighboring printed tracks across the web. The phenomenon could be a result of drop stream perturbations caused by unsteady print gap airflow of the type similar to that observed in the previous study. ©2013; Society for Imaging Science and Technology.

Dynamics of Incoherent Photovoltaic Spatial Solitons

Propagation properties of bright and dark incoherent beams are numerically studied in photovoltaic-photorefractive crystal by using coherent density approach for the first time. Numerical simulations not only exhibit that bright incoherent photovoltaic quasi-soliton, grey-like incoherent photovoltaic soliton, incoherent soliton doublet and triplet can be established under proper conditions, but also display that the spatial coherence properties of these incoherent beams can be significantly affected during propagation by the photovoltaic field.

陕西省米脂县耕地动态变化与粮食安全研究

根据米脂县1990—2007年粮食生产的相关数据,对该县耕地、人口和粮食生产动态变化以及粮食总产与其影响因素进行了灰色关联度分析。结果表明,退耕还林还草工程是耕地总面积迅速减少的主要原因;提高粮食单产保障粮食总产是实现粮食安全的最关键因子;持续增长的人口造成耕地的承载压力越来越大,并对该区实现粮食安全提出了更大的挑战。最后,根据分析结果提出了增加科技投入,提高单产,保护耕地,挖掘耕地潜力等措施以保障该区域的粮食安全,为政府部门制定相关粮食安全政策提供科学的理论依据。

土壤侵蚀高维指数非线性模型及其参数辨识

模型验证和数据库组建基础上,用WinEPIC模型定量模拟研究了黄土高原半湿润区长武、半干旱区固原和半干旱偏旱区海原20～30年内苜蓿草地水分生产潜力、10m土层土壤有效含水量和土壤湿度剖面分布特征的动态变化.结果表明:长武、固原和海原苜蓿草地水分生产潜力模拟值随降水量变化而呈现波动性降低趋势,其平均值分别为8.81、3.83和2.48t.hm-2;长武、固原和海原苜蓿草地10m土层逐月土壤有效含水量模拟值均呈现明显的波动性降低趋势,模拟初期,4～8年生苜蓿草地土壤干燥化趋势十分强烈,此后,随降水量变化长期在较低水平上波动;随着苜蓿生长年限的延长,苜蓿草地土壤干层逐年加深、加厚,长武、固原和海原土壤干层分布深度达到10m所需时间依次为6、6和4年,此后苜蓿草地降水渗深以下土层长期维持较为稳定的干燥化状态;苜蓿草地水分持续利用的合理年限为半湿润区8～10年,半干旱区6～8年,半干旱偏旱区4～6年.