Iowa Scenic/Heritage Byway Evaluation, 2000

This report documents the results of the field inventory and evaluation of the nominated routes. Data is provided describing the visual and heritage character of the nominated routes and locations important to this character. Graphs, displays and maps were produced using the rating system described in the Iowa Scenic Byway Designation Guide. Discussions of specific inventory procedures and evaluation techniques can be found in two reports, Iowa Scenic Byway Evaluation, December 1992, and Iowa Scenic Byway Evaluation, November 1995.

Iowa Scenic/Heritage Byway Evaluation, 2001

This report documents the results of the field inventory and evaluation of the nominated routes. Data is provided describing the visual and heritage character of the nominated routes and locations important to this character. Graphs, displays and maps were produced using the rating system described in the Iowa Scenic Byway Designation Guide. Discussions of specific inventory procedures and evaluation techniques can be found in two reports, Iowa Scenic Byway Evaluation, December 1992, and Iowa Scenic Byway Evaluation, November 1995.

Evaluation of Bond Retainage in Portland Cement Concrete Overlays by Infrared Thermography and Ground Penetrating Radar, HR-537, 1988

The purpose of this project was to evaluate the location and quantities of debonding in selected portland cement concrete (PCC) overlays. The project entailed an infrared thermographic survey and a ground penetrating radar survey of the PCC overlays to locate areas of debonding between the overlays and the original pavement. An infrared scanner is capable of locating these areas because of the temperature differential which is established between bonded and debonded areas under certain environmental conditions. A conventional video inspection of the top surface of the pavement was also completed in conjunction with the infrared thermographic survey to record the visual condition of the pavement surface. The ground penetrating radar system is capable of locating areas of debonding by detecting return wave forms generated by changes in the dielectric properties at the PCC overlay original pavement interface. This report consists of two parts; a text and a set of plan sheets. The text summarizes the procedures, analyses and conclusions of the investigation. The plan sheets locate specific areas of debonding, as identified through field observations.

Evaluation of One-Dimensional Seismic Site Response Analyses at Small to Large Strain Levels

Thesis (Master's)--University of Washington, 2016-08

Random Access over Multi-Packet Reception Channels: A Mean-Field Approach

Thesis (Ph.D.)--University of Washington, 2016-06

The challenges of integrating biodiversity and ecosystem services monitoring and evaluation at a landscape-scale wetland restoration project in the UK

There is an increasing emphasis on the restoration of ecosystem services as well as of biodiversity, especially where restoration projects are planned at a landscape scale. This increase in the diversity of restoration aims has a number of conceptual and practical implications for the way that restoration projects are monitored and evaluated. Landscape-scale projects require monitoring of not only ecosystem services and biodiversity but also of ecosystem processes since these can underpin both. Using the experiences gained at a landscape-scale wetland restoration project in the UK, we discuss a number of issues that need to be considered, including the choice of metrics for monitoring ecosystem services and the difficulties of assessing the interactions between ecosystem processes, biodiversity, and ecosystem services. Particular challenges that we identify, using two pilot data sets, include the decoupling of monetary metrics used for monitoring ecosystem services from biophysical change on the ground and the wide range of factors external to a project that influence the monitoring results. We highlight the fact that the wide range of metrics necessary to evaluate the ecosystem service, ecosystem process, and biodiversity outcomes of landscape-scale projects presents a number of practical challenges, including the need for high levels of varied expertise, high costs, incommensurate monitoring outputs, and the need for careful management of monitoring results, especially where they may be used in making decisions about the relative importance of project aims.

Evaluation of vegetation recovery after fire: a case study in Calde, central region of Portugal

Remote Sensing has been used for decades, and more and more applications are added to its repertoire. With this study we aim to show the use of Remote Sensing in the field of vegetation recovery monitoring in burned areas and the added value of data with a high spatial resolution. This was done by analysing both Landsat 7 and 8 scenes, after the forest fire of summer 2012 in the parish of Calde, in the central region of Portugal, as well as an orthophoto produced with images acquired by an unmanned aerial vehicle.

Bioexploration of wild Alaskan berries: From field screening to functional food

Wild berries are fundamental components of traditional diet and medicine for Native American and Alaska Native tribes and contain a diverse array of phytochemicals, including anthocyanins and proanthocyanidins, with known efficacy against metabolic disorders. Bioexploration represents a new paradigm under which bioactive preparations are screened in coordination with indigenous communities, to prepare for subsequent in-depth chemical and biological analysis. The inclusive, participatory philosophical approach utilized in bioexploration has additional benefits that could be realized in seemingly disparate areas, such as education and economics. Five species of wild Alaskan berries (Vaccinium uliginosum, V. ovalifolium, Empetrum nigrum, Rubus chamaemorus, and R. spectabilis) were tested using “Screens-to-Nature” (STN), a community-participatory approach to screen for potential bioactivity, in partnership with tribal members from three geographically distinct Alaskan villages: Akutan, Seldovia, and Point Hope. Berries were subsequently evaluated via HPLC and LC-MS2, yielding significant species and location-based variation in anthocyanins (0.9-438.6 mg eq /100g fw) and proanthocyanins (73.7-625.2 mg eq /100g fw). A-type proanthocyanidin dimers through tetramers were identified in all species tested. Berries were analyzed for in vitro and in vivo activity related to diabetes and obesity. R. spectabilis samples increased preadipocyte-factor-1 levels by 82% over control, and proanthocyanidin-rich fractions from multiple species reduced lipid accumulation in 3T3-L1 adipocytes. Furthermore, extracts of V. uliginosum and E. nigrum (Point Hope) reduced serum glucose levels in C57bl/6j mice up to 45%. The same precepts of bioexploration, especially the inclusion of indigenous community perspectives and knowledge, have relevance in other areas of study, such as education and economics. Studies have established the apathetic, low-motivational environment characteristic of many introductory science laboratory classes is detrimental to student interest, learning, and continuation in scientific education. A primary means of arresting this decline and stimulating the students’ attention and excitement is via engagement in hands-on experimentation and research. Using field workshops, the STN system is investigated as to its potential as a novel participatory educational tool, using assays centered around bioexploration and bioactive plant compounds that hold the potential to offset human health conditions. This evaluation of the STN system provided ample evidence as to its ability to augment and improve science education. Furthermore, Strengths, Weaknesses, Opportunities, and Threats (SWOT) analysis was employed as a theoretical framework to review the potential benefits and hurdles associated with developing a wild Alaskan berry commodity. Synthesizing various sources of information – including logistics and harvest costs, sources of initial capital, opportunities in the current superfruit industry, and socioeconomic factors – the development of a berry commodity proves to be a complex amalgam of competing factors which would require a delicate balance before proceeding.

Exergetic, energetic, economic and environmental evaluation of concentrated solar power plants in Libya

The PhD project addresses the potential of using concentrating solar power (CSP) plants as a viable alternative energy producing system in Libya. Exergetic, energetic, economic and environmental analyses are carried out for a particular type of CSP plants. The study, although it aims a particular type of CSP plant – 50 MW parabolic trough-CSP plant, it is sufficiently general to be applied to other configurations. The novelty of the study, in addition to modeling and analyzing the selected configuration, lies in the use of a state-of-the-art exergetic analysis combined with the Life Cycle Assessment (LCA). The modeling and simulation of the plant is carried out in chapter three and they are conducted into two parts, namely: power cycle and solar field. The computer model developed for the analysis of the plant is based on algebraic equations describing the power cycle and the solar field. The model was solved using the Engineering Equation Solver (EES) software; and is designed to define the properties at each state point of the plant and then, sequentially, to determine energy, efficiency and irreversibility for each component. The developed model has the potential of using in the preliminary design of CSPs and, in particular, for the configuration of the solar field based on existing commercial plants. Moreover, it has the ability of analyzing the energetic, economic and environmental feasibility of using CSPs in different regions of the world, which is illustrated for the Libyan region in this study. The overall feasibility scenario is completed through an hourly analysis on an annual basis in chapter Four. This analysis allows the comparison of different systems and, eventually, a particular selection, and it includes both the economic and energetic components using the “greenius” software. The analysis also examined the impact of project financing and incentives on the cost of energy. The main technological finding of this analysis is higher performance and lower levelized cost of electricity (LCE) for Libya as compared to Southern Europe (Spain). Therefore, Libya has the potential of becoming attractive for the establishment of CSPs in its territory and, in this way, to facilitate the target of several European initiatives that aim to import electricity generated by renewable sources from North African and Middle East countries. The analysis is presented a brief review of the current cost of energy and the potential of reducing the cost from parabolic trough- CSP plant. Exergetic and environmental life cycle assessment analyses are conducted for the selected plant in chapter Five; the objectives are 1) to assess the environmental impact and cost, in terms of exergy of the life cycle of the plant; 2) to find out the points of weakness in terms of irreversibility of the process; and 3) to verify whether solar power plants can reduce environmental impact and the cost of electricity generation by comparing them with fossil fuel plants, in particular, Natural Gas Combined Cycle (NGCC) plant and oil thermal power plant. The analysis also targets a thermoeconomic analysis using the specific exergy costing (SPECO) method to evaluate the level of the cost caused by exergy destruction. The main technological findings are that the most important contribution impact lies with the solar field, which reports a value of 79%; and the materials with the vi highest impact are: steel (47%), molten salt (25%) and synthetic oil (21%). The “Human Health” damage category presents the highest impact (69%) followed by the “Resource” damage category (24%). In addition, the highest exergy demand is linked to the steel (47%); and there is a considerable exergetic demand related to the molten salt and synthetic oil with values of 25% and 19%, respectively. Finally, in the comparison with fossil fuel power plants (NGCC and Oil), the CSP plant presents the lowest environmental impact, while the worst environmental performance is reported to the oil power plant followed by NGCC plant. The solar field presents the largest value of cost rate, where the boiler is a component with the highest cost rate among the power cycle components. The thermal storage allows the CSP plants to overcome solar irradiation transients, to respond to electricity demand independent of weather conditions, and to extend electricity production beyond the availability of daylight. Numerical analysis of the thermal transient response of a thermocline storage tank is carried out for the charging phase. The system of equations describing the numerical model is solved by using time-implicit and space-backward finite differences and which encoded within the Matlab environment. The analysis presented the following findings: the predictions agree well with the experiments for the time evolution of the thermocline region, particularly for the regions away from the top-inlet. The deviations observed in the near-region of the inlet are most likely due to the high-level of turbulence in this region due to the localized level of mixing resulting; a simple analytical model to take into consideration this increased turbulence level was developed and it leads to some improvement of the predictions; this approach requires practically no additional computational effort and it relates the effective thermal diffusivity to the mean effective velocity of the fluid at each particular height of the system. Altogether the study indicates that the selected parabolic trough-CSP plant has the edge over alternative competing technologies for locations where DNI is high and where land usage is not an issue, such as the shoreline of Libya.

A comparative approach to web evaluation and website evaluation methods.

There is still a lack of an engineering approach for building Web systems, and the field of measuring the Web is not yet mature. In particular, there is an uncertainty in the selection of evaluation methods, and there are risks of standardizing inadequate evaluation practices. It is important to know whether we are evaluating the Web or specific website(s). We need a new categorization system, a different focus on evaluation methods, and an in-depth analysis that reveals the strengths and weaknesses of each method. As a contribution to the field of Web evaluation, this study proposes a novel approach to view and select evaluation methods based on the purpose and platforms of the evaluation. It has been shown that the choice of the appropriate evaluation method(s) depends greatly on the purpose of the evaluation.

Erratum to "Optimization of resin extraction from an Australian arid grass 'Triodia pungens' and its preliminary evaluation as an anti-termite timber coating" [Ind. Crops Prod. 59 (2014) 241–247]

The publisher regrets to inform the readers that the image that is appearing for Fig. 8 is incorrect and that the Supplementary material is missing on the published paper. The correct image for Fig. 8 and the Supplementary files are provided below: Fig. 8. (a) Timber blocks covered by invented plastic container bottom open, (b) timber blocks in the field after trial, (c) and (d) comparison between resin-coated blocks without termite damage and control blocks which were severely damaged by termites.

Bumps and rings in a two-dimensional neural field: splitting and rotational instabilities

In this paper we consider instabilities of localised solutions in planar neural field firing rate models of Wilson-Cowan or Amari type. Importantly we show that angular perturbations can destabilise spatially localised solutions. For a scalar model with Heaviside firing rate function we calculate symmetric one-bump and ring solutions explicitly and use an Evans function approach to predict the point of instability and the shapes of the dominant growing modes. Our predictions are shown to be in excellent agreement with direct numerical simulations. Moreover, beyond the instability our simulations demonstrate the emergence of multi-bump and labyrinthine patterns. With the addition of spike-frequency adaptation, numerical simulations of the resulting vector model show that it is possible for structures without rotational symmetry, and in particular multi-bumps, to undergo an instability to a rotating wave. We use a general argument, valid for smooth firing rate functions, to establish the conditions necessary to generate such a rotational instability. Numerical continuation of the rotating wave is used to quantify the emergent angular velocity as a bifurcation parameter is varied. Wave stability is found via the numerical evaluation of an associated eigenvalue problem.

National evaluation of NHS genetics service investments: emerging issues from the cancer genetics pilots

In seeking to fulfil the ambition of the 2003 genetics white paper, Our Inheritance, Our Future, to ‘mainstream’ genetic knowledge and practices, the Department of Health provided start-up funding for pilot services in various clinical areas, including seven cancer genetics projects. To help to understand the challenges encountered by such an attempt at reconfiguring the organization and delivery of services in this field, a programme-level evaluation of the genetics projects was commissioned to consider the organizational issues faced. Using a qualitative approach, this research has involved comparative case-study work in 11 of the pilot sites, including four of the seven cancer genetics pilots. In this paper, the researchers present early findings from their work, focusing in particular on the cancer genetics pilots. They consider some of the factors that have influenced how the pilots have sought to address pre-existing sector, organizational and professional boundaries to these new ways of working. The article examines the relationship between these factors and the extent to which pilots have succeeded in setting up boundary-spanning services, dealing with human-resource issues and creating sustainable, ‘mainstreamed’ provision which attracts ongoing funding in a volatile NHS commissioning environment where funding priorities do not always favour preventive, risk-assessment services.

Al-based anodic oxide films structure observation using field emission gun scanning electron microscopy

In the present work, the anodic oxide films of Al, Al-Cu 4.5% and Al-Si 6.5% alloys are formed using direct and pulse current. In the case of Al-Cu and Al-Si alloys, the electrolyte used contains sulfuric acid and oxalic acid, meanwhile for Al the electrolyte contains sulfuric acid only. Al-Cu alloy was submitted to a heat treatment in order to decrease the effect of inter metallic phase theta upon the anodic film structure. Fractured samples were observed using a field emission gun scanning electron microscope JSM-6330F at (LME)/Brazilian Synchrotron Light Laboratory (LNLS), Campinas, SP, Brazil. The oxide film images enable evaluation of the pore size and form with a resolution similar to the transmission electron microscope (TEM) resolution. It is also observed that the anodizing process using pulse current produces an irregular structure of pore walls, and by direct cur-rent it is produced a rectilinear pore wall. (c) 2005 Elsevier B.V. All rights reserved.

Evaluation of Calretinin as a New Marker in the Diagnosis of Hirschsprung Disease

Background: Hirschsprung’s disease (HD) is a congenital intestinal motility disorder with absence of ganglion cells in the colonic wall. Diagnosis of the disease is mainly based on the identification of the lack of ganglion cells in the pathology sections of the colon which is very difficult and time consuming and also needs several serial cut sections. There are many proposed markers in this field in the literature but none of them has been satisfactory. Calretinin immunohistochemistry (IHC) has been introduced as a new diagnostic marker to overcome the problems in diagnosis of this disease about 5 years ago. However there are few studies regarding the benefits and pitfalls of this marker. Objectives: The aim of this study is to determine the diagnostic value of calretinin IHC in detecting aganglionosis (HD). Patients and Methods: 27 HD patients and 28 non-Hirschsprung’s disease (NHD) patients were collected in a prospective study and calretinin IHC was performed on 31 aganglionic and 51 normoganglionic full wall thickness sections of colectomies (some of the cases had more than 1 section). The IHC slides were evaluated by two pathologists and the diagnostic value was calculated in comparison with gold standard which is the presence or absence of ganglion cells in serial Hematoxylin and Eosin (HE) stained sections of the colectomies. Results: There was great concordance between the final diagnosis of both pathologists and gold standard (k > 0.9). Calretinin immunostaining showed 100% specificity and positive predictive value and more than 90% sensitivity and negative predictive value. High agreement was present between the two pathologists (k > 0.9). Conclusions: Calretinin IHC is a very convenient, useful and valuable method to demonstrate aganglionosis in HD patients. Loss of calretinin immunostaining in lamina propria and submucosa is characteristic of HD.