Alterações dimensionais em pacientes submetidos à expansão rápida da maxila com aparelho do tipo Haas

The maxillary atresia is a alteration in the transverse dimension that can result in a unilateral or bilateral crossbite. For correction of atresia of the upper dental arch appliances with the intent to expand the arch of orthopedic or orthodontic manner are used, obtaining across-compatibility between the dental arches. The purpose of this study was to evaluate the dimensional changes of the maxillary in patients in the mixed dentition with atresia in the upper dental arch, using occlusal radiographs taken before, after rapid maxillary expansion and after removal of the appliance. Methods: the sample consisted of 35 patients who used the appliance type conventional Haas, in the mixed dentition, according to the standard protocol for installation, activation, containment and removal of the appliances rapid maxillary expansion. Results: the results confirm that the suture opening occurs in greater quantities in the anterior (4.3 mm) than posterior to (3.74 mm), representing a triangular opening of 7 degrees on average with the posterior opening 87% of the quantity of anterior opening. The molars region expanded about 5 mm, and the base bone 3.7 mm, representing a 74% bone expansion of the expansion teeth.

Avaliação das alterações dentárias e esqueléticas induzidas pelo uso do aparelho de Herbst no tratamento da classe II na dentadura mista: Revisão sistemática

Objective: evaluate the immediate dental and skeletal changes induced by the Herbst appliance on early treatment of Angle´s Class II malocclusion. Material and Method: several electronic databases such as Scopus, Pub Med, Medline, Cochrane Library, Lilacs and Scielo were searched. The abstracts that fullfilled the selection criteria were selected and those that did not provide enough information about these criteria were selected but the final decision of including them or not on the research, was taken after the complete reading of the article. The selection criteria were: clinical studies with Class II individuals, both male and female, with initial age of 7 to 10 years, treated with the Herbst appliance that analysed the dental and/or skeletal changes evaluated on lateral cephalometric radiographs; researches where the treatment performed did not involve extractions or surgical interventions; studies that included patients without syndromes or health concerns and articles published in English or Portuguese. Results and Conclusions: five articles were selected. The articles showed that significant changes happened in the mandibular sagittal lenght, on facial convexity angle, on maxillo-mandibular relationship, on retroclination of the upper incisors and on distal movement of the upper molars, on proclination of the lower incisors and on extrusion of the lower molars. The appliance exerted a limited effect on the anterior relocation of the maxillary complex and on facial heights. However, more studies about the performance of the Herbst appliance on early treatment of Class II are needed.

Avaliação das dimensões e relacionamento dos arcos dentários após tratamento com Bionator de Balters

The deficiency of data in the literature took us to evaluate the Bionator of Balters appliance in the alterations of the dimensions and the relationship of the dental archs in children with malocclusion Class II, division 1 of Angle. The experimental group was constituted by 36 pairs cast Caucasians patients, aged between 7 years and 10 months - 11 years and 8 months, being 10 females and 8 males. The Levene´s test showed statistical evidences of likeness among the groups. Statistical analysis was preceded and showed significant alterations (p < 0,005) in the variable indicatives of maxillary first molars' distance, overjet, upper arch total length, upper arch anterior length, right molar relationship, left molar relationship, right canine relationship and left canine relationship. On the other hand, there wasn't significant alteration related to the lower arch and maxillary intercanines distance. The Balters' Bionator appliance had a favorable effect in the improvement of the correction of the malocclusion in Class II (foremost in molars and canines relationship) and transversal increase of the upper arch, mainly in the posterior area of arch.

Dimensões do corredor bucal e sua relação com a distância inter pré-molar e intercomissural

The objective of the study was to analyze the size of buccal corridor during the smile of individuals from 10 to 19 years of age and to determine whether there is a relationship among buccal corridor, inter premolar distance, inter commissure width. Standard digital frontal photographs in posed broad smiles and dental casts were taken of a sample of 150 individuals divided into 5 age groups of 30 individuals: 10-11 years old (G1), 12-13 years old (G2), 14-15 years old (G3), 16-17 years old (G4), 18-19 years old (G5). Distances among the cusps of superior first premolars and buccal corridors were measured for subsequent comparisons using the Image Tool 3.0 program. Data was analyzed using Anova. The SNK test and Tamhane test were applied. The mean values of the buccal corridor ranged from 4.00-to 10.69 mm on the right side and from 4.06 to 11.43 mm on the left side. In percentage related with intercomissure width each side of the buccal corridor ranged from 7.46 to 16.47% on the right side and from 7.58% to 17.61% on the left side. Buccal corridors were different between genders and increased with age. Males have bigger buccal corridors than females, but there is no difference between gender when calculated as a percentage related with the inter commissure width. The inter premolar width is significantly correlated with inter commissure widths of female individuals 14-15 years old and 18-19 years old, and with the right linear buccal corridor of males and females aged 14-15 years old.

Modificação de forma e dimensões dos arcos superior e inferior obtidas em modelos de estudo após expansão rápida da maxila com o aparelho hyrax

The aim of an orthodontic treatment is the achievement of a balanced, esthetic and, most of all, stable, intra and inter arches relationship. A common problem observed in occlusion is posterior crossbite and atresic maxilla. This problem may be treated by slow expansion, rapid expansion or surgically assisted expansion. For the present study cast models of 14 children between 7 and 11 years old were evaluated. There were 7 male and 7 female subjects that presented posterior crossbite and needed rapid maxillary expansion. The Hyrax appliance performed the therapy for correction of this transversal alteration, which is a common possibility in the treatment of this malocclusion. It was observed that the distance between the upper first molars and upper cuspids increased significantly; the length of the upper arch decreased and its perimeter increased significantly. At the lower arch there were no dimensional changes.

Descrição do aparelho VABB (Vertically Activated Bite Block) para o tratamento da mordida aberta anterior

Nowadays, the correction of skeletal vertical dysplasia is considered a great challenge in Orthodontics. The skeletal open bite treatment presents limitations related to vertical growth pattern, the extension of open bite and especially the stability, which is very questioned. The treatment of skeletal open bite is mostly realized by the inhibition of vertical alveolar posterior development (relative intrusion) or absolute intrusion of posterior teeth, through vertical forces, generated by the action of masticatory muscles. The purpose of this article is to present a new appliance for the treatment of skeletal open bite, the VABB (Vertically Activated Bite Block) or modified Bite Block, whose action mechanism is to limit the vertical development of the molars, by the action of facial muscles and two bilateral expansion screws that provide a counterclockwise rotation of the mandible. It will also be presented a clinical case and the technical steps for the construction of this appliance.

Ertty System®: distalização segmentar

Introduction: Ertty System® is an intraoral system of biomechanical forces to move teeth anteroposteriorly. The application of forces on this system results in the distalization of the molar and all lateral segment in the side to be distalized, including premolars and canine, resulting in alveolar bone remodeling. This system is indicated to correct uni- or bilateral maxillary dental Class II malocclusion in permanent dentition both in children and adults. It is contraindicated in case of skeletal asymmetries, protrusion of maxillary and mandibular teeth, skeletal Class II and Class II subdivision malocclusions with mandibular midline deviation. This study describes Ertty System® and presents two clinical cases treated using this system. The two female patients presented with Class II malocclusion subdivision and maxillary midline deviation. Results: It was achieved correct alignment and leveling, Class I dental relation and correction of upper midline. Conclusion: The success and stability of results confirmed diagnosis and treatment adequacy.

Otimização do tracionamento de canino impactado pela técnica do arco segmentado: relato de caso clinico

Upper canines impaction are considered the second most frequent and are associated to important esthetics and functional limitations. Among the treatment strategies described in the literature the most commonly used are the extraction of the primary canines and the surgical exposure followed by orthodontic traction, that requires an adequate interdisciplinary approach. The aim of this case report is to draw the attention of the clinician to the possibility of adapting the segmented arch technique to manage a canine impaction clinical case.

Resistência ao cisalhamento de bráquetes fotopolimerizados com arco de plasma, LED e luz halógena utilizando diferentes tempos

This study evaluated in vitro the shear bond strength of brackets bonded with xenon plasma arc light, light-emitting diode (LED) and conventional halogen light using different curing times. Brackets were bonded to the buccal surface of 60 human maxillary premolars allocated to five groups. In groups 1 and 2, the resin was cured with the plasma arc for three and six seconds (s), respectively; in groups 3 and 4, the LED was used for five and ten s, respectively; and in group 5, the halogen light was used for 40 s. The specimens were stored in water for 24 hours and subjected to a shear force until bracket failure. The debonding pattern was classified according to the adhesive remnant index (ARI). The results were assessed by Anova and the SNK post-hoc test. No differences were detected among groups 2, 4 and 5, which showed higher averages than groups 1 and 3, which were not different between themselves. The ARI scores showed no differences among the three types of light sources in all times tested. Plasma arc and LED lights can be used with shorter curing times, within certain limits, than conventional halogen light for bonding orthodontic brackets, without decreasing bond strength.

Influência da clorexidina na capacidade de umectabilidade da dentina hígida e afetada por cárie por um sistema adesivo

To evaluate the effect of chlorhexidine (CHX) on the wettability of sound and caries affected dentin by a simplified adhesive system. Material and Methods: Flat coronal dentin surfaces were produced on 60 sound molars, 30 of which were artificially decayed. The teeth were divided randomly into 3 groups (n = 10) with smear layer (SL), without SL impregnated with water and without SL impregnated with chlorhexidine. The SL removal was performed by phosphoric acid etching for 15 s. 20 uL of distilled water or 2% chlorhexidine digluconate were applied on the demineralized dentin for 60 s. Then, a drop of Single Bond 2 was deposited on each surface. Contact angles between dentin surface and adhesive was measured by means of a goniometer and data were submitted to ANOVA and Tukey tests (α = 0.05). Results: Higher contact angles were obtained on sound versus caries affected dentin (p <0.05), regardeless of the surface treatment. For both substrates, contact angles statistically higher were obtained for dentin covered with SL (P <0.05). The SL removal resulted in significant reduction of the angles (P <0.05) and no difference was found among angles produced on demineralized dentin impregnated with water or chlorhexidine (p> 0.05). Conclusion: Caries affected dentin wettability was higher than sound dentin and that characteristic was not influenced by chlorhexidine application.

Osteomielitis crónica con periostitis proliferativa

Chronic osteomyelitis with proliferative periostitis is a kind of osteomyelitis that is characterized by a great periosteal reaction resulting of low grade stimulation, usually a caries lesion associated a periapical pathology. It affects especially children and young adults, with the mandible as the most common site, usually in the inferior aspect. Clinically presents as a painless hard swelling intra and/or extra-oral. Radiographic aspects include bone layers new formed, parallel to each other and to the underlying cortical surface, giving the characteristic appearance of "onion skin". Treatment includes elimination of the cause, with or without antibiotics, being restored the facial symmetry of patient. The present article is a clinical case report of chronic osteomyelitis with proliferative periostitis affecting a female 11 year old patient, caused by a caries lesion in the left permanent first molar, that was submissed to a exodontia and the facial symmetry of the patient was restored with management.

Effect of platele-rich plasma on healing of class III furcation defects treated with autogenous bone grafting and guided tissue regeneration: a histomorphometric sutdy in dogs

Objective: The purpose of this study was to evaluate the effects of the platelet-rich plasma (PRP) when used in combination with autogenous bone graft and bioabsorbable membrane (Resolut® ) in the treatment of Class  III furcation defects in dogs. Material and method: Class III furcation defects (5 mm in height and in depth) were surgically created in the mandibular third premolars of five mongrel dogs. After nine weeks, the lesions were treated with scaling and root planning and each defect received one of the following treatments: autogenous bone graft + membrane (group C) or PRP + autogenous bone graft + membrane (group T). After a healing period of 90 days, the animals were sacrificed. Routine histological processing and staining with hematoxilyn and eosin and Masson trichrome were performed and a histomorphometric analysis determined the effect of the treatments on periodontal tissue regereneration. Data were analyzed by Hotelling’s T-squared (p < 0.05). Result: No statistically significant difference between C and T groups was observed by the histomorphometric analysis of the furcation area. Both treatment groups demonstrated similar regenerative results with the furcation defects partially filled and periodontal regeneration limited to the experimental notches of the lesions. (p > 0.05). Conclusion: According to the present results, PRP does not enhance the periodontal regeneration in class III furcation defects treated with autogenous bone graft and bioabsorbable membrane.

Caracterização radiográfica ex vivo de biomateriais utilizados para regeneração óssea em mandíbulas de porcos

Introduction: The radiographic characteristics of a biomaterial, such as its density, may influence the evaluation of the results obtained following its clinical use. Objective: The aim of this study was to evaluate the radiographic density of biomaterials used as bone substitutes, inserted into dental sockets and bone defects in created in the jaws of pigs. The influence of a soft tissue simulator on the results was also evaluated. Material and method: Two and three-millimeter-deep bone defects were created in the pigs mandible and the right first molar extraction socket were used. Commercial samples of five biomaterials were tested: Hydroxyapatite, Lyophilized Bovine Bone, 45S5 bioglass (generic), PerioGlass and β-Tri-Calcium Phosphate, and compared to a positive (mandibular bone) and negative (empty alveolar bone defects) controls. Radiographic images were acquired with and without a 10 mm thick soft-tissue simulator. Result: The results for the extraction sockets showed no differences between the biomaterials and the negative control. For the bone defects, the depth of the defect density influenced the density, both in the negative control (p < 0.01) and biomaterials (p < 0.05) groups. The soft- tissue simulator did not alter the results. Conclusion: The type of the evaluated defect can interfere in the radiographic features presented by each biomaterial, while the simulation of soft tissues was not statistically significant.

Estudio histológico del processo de reparación alveolar después de la aplicación tópica de la solucioón anestésica prilocaína 3 % con felipressina o,o3 ui/ml

The aim of this study was to evaluate the local anesthetic solution, composed by Prilocaine 3% and felipressin 0,03 UI/ml, influence on the alveolar repair process in rats after dental extraction. This research was previously approved by the Ethic Committee in Research of the Masters Degree Program in Oral and Maxillofacial Surgery of the Marília University (UNIMAR), Marília, São Paulo, Brazil. It was an experimental, randomly controlled study, with bifactorial analysis (group control versus experimental group, in function of the postoperative times (2 X 4)). For the accomplishment of this study 32 rats were used (Rattus norvegicus, albinus, Wistar), males, adults, weighing between 280 and 320 grams. The animals were selected and divided into Group I (control) and Group II (Citocain 3%® - Prilocaine 3% with felipressin 0,03UI/ml) with 16 rats each; being four animals of the Group I and four of the Group II, destined to the euthanasia in the postoperative periods of 3rd, 7th, 15th and 24th days. The histological analysis with base in the developed methodology, allowed us to conclude that the anesthetic solution of Citocain 3%® applied with gauze compress on the surgical dental wound, produced tissue events that committed the basic biological principles, that are responsible for the regeneration of the gingival epithelium and the alveolar process repair in rats. The Group I presented better results in the alveolar repair when compared to the Group II.

Complicações Associadas aos Enxertos Ósseos Aposicionais com Osso Autógeno

Introdution: Tooth extraction results in alveolar ridge resorption due to the progressive reabsorption, which frequently is a limitating factor of dental implants treatment, in function of the insufficient bone height for execution, could be indicated the use of grafts for increase of the alveolar edge. However, the success of the bone graft requests the meticulous attendance of the clinical stages. Proposition: The objective of this research was to evaluate the postoperative complications associated to the autogenous bone grafts. Materials and Methods: Through a random retrospective analysis, 90 file records of patients submitted to the surgical procedure of autogenous bone graft in the period of January from 2000 to the March of 2008. A clinical record was elaborated with base in the necessary data for this evaluation. Results: About the file data analysis, 59 female with average of 49,42 years and 31 male with average of 47,90 years. The previous diseases most related were arterial hypertension, stomachache and diabetis. The smokers was noticed in 13,3% of patients. The donor site most used was a mandibular ramus. The postoperative complications in receiving area represented 17,8% of file datas analysed and in the donor site only one patient showed parestesis. Conclusion: Among the total analyzed files it was observed that the postoperative complications associated with the autogenous bone grafts represented 18,9% of the patients submitted to the procedure, more frequently affecting the receiving area, obtaining partial exposure of the bone graft and absence of inserted gingiva on vestibular cortical bone.