Ambrosia and bark beetles (Scolytidae : Coleoptera) in pine and eucalypt stands in southern Brazil

More than 95% of the reforested area in Brazil is covered by exotic Eucalyptus and Pinus plantations. Native Scolytidae, mostly ambrosia beetles, appear to be rapidly adapting to these exotic trees, and reports of economic damage are becoming frequent. The objectives of our research were to survey, characterize and compare the Scolytidae fauna present in a P. taeda and an E. grandis stand in Telemaco Borba, Parana state, Brazil. Beetles were caught in ethanol baited ESALQ-84 vane traps in weekly collections from July 1995 until July 1997. In all, 87 species were trapped, 62 in the pine and 75 in the eucalypt stand. The most abundant beetle species in the pines were Hypothenemus eruditus, Xyleborinus gracilis, Cryptocarenus sp. and Xylosandrus retusus, while the most frequent were H. eruditus, Cryptocarenus sp., H. obscurus, Ambrosiodmus obliquus, and X. gracilis. In the eucalypt stand, H. eruditus, X. retusus, H. obscurus, X. ferrugineus and Microcorthylus minimus were the most abundant species, and H. eruditus, H. obscurus and M. minimus were the most frequently trapped. The majority of the species, regardless of the forest community, were most active between August (end of winter) and October (mid-spring). Significantly more H. eruditus, X. gracilis, Cryptocarenus sp., Corthylus obliquus, Hypothenemus bolivianus, A. obliquus, Sampsonius dampfi and Xyleborus affinis were trapped in the pine stand, while X. retusus, H. obscurus, X. ferrugineus, Xyleborinus linearicollis, Corthylus sp, and Corthylus convexicauda were caught in higher numbers in the eucalypt stand. Approximately 50% of the species trapped were found in both communities. Morisita's similarity index indicates the composition of the two communities is very similar, suggesting that most of the beetles are polyphagous. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Modeling grouped survival data with time-dependent covariates

In this article, proportional hazards and logistic models for grouped survival data were extended to incorporate time-dependent covariates. The extension was motivated by a forestry experiment designed to compare five different water stresses in Eucalyptus grandis seedlings. The response was the seedling lifetime. The data set was grouped since there were just three occasions in which the seedlings was visited by the researcher. In each of these occasions also the shoot height was measured and therefore it is a time-dependent covariate. Both extended models were used in this example, and the results were very similar.

Effects of different environmental stresses on seed germination

In this paper, the hypothesis was that different environmental stresses may show similar responses in a biological system, as exemplified by the kinetic of germination of Eucalyptus grandis W. Hill ex Maiden seeds. It was observed that the kinetic of germination depends on environmental factors, and different treatments induced similar germination responses. The treatments with PEG 6000 and NaCl suggest that germination depends on solute used, since NaCl exhibit both ionic and osmotic effects. The analysis of the results showed that different external disturbances may lead, perhaps through different physiological ways, to similar responses related to the germination process.

Toward a hierarchical concept of plant stress

A number of attempts have been made to obtain a clear definition of biological stress. However, in spite of the efforts, some controversies on the concept of plant stress remain. The current versions are centered either on the cause (stress factor) or on the effect (stress response) of environmental stress. The objective of this study was to contribute to the definition of stress, using a hierarchical approach. Thus, we have performed an analysis of the most usual stress concepts and tested the relevance of considering different observation scales in a study on plant response to water deficit. Seedlings of Eucalyptus grandis were grown in vitro at water potentials ranging from -0.16 to -0.6 MPa, and evaluated according to growth and biochemical parameters. Data were analyzed through principal component analysis (PCA), which pointed to a hierarchical organization in plant responses to environmental disturbances. Growth parameters (height and dry weight) are more sensitive to water deficit than biochemical ones (sugars, proline, and protein), suggesting that higher hierarchical levels were more sensitive to environmental constraints than lower hierarchical ones. We suggest that before considering an environmental fluctuation as stressful, it is necessary to take into account different levels of plant response, and that the evaluation of the effects of environmental disturbances on an organism depends on the observation scale being used. Hence, a more appropriate stress concept should consider the hierarchical organization of the biological systems, not only for a more adequate theoretical approach, but also for the improvement of practical studies on plants under stress.

Determinação de fósforo microbiano: comparação entre métodos e coberturas florestais

Muitos trabalhos mostram a importância da biomassa microbiana do solo (BMS), principalmente como fonte/dreno de C e de N em plantações florestais; contudo, são escassos os trabalhos relacionados ao fósforo microbiano (PBM), sobretudo aqueles relativos aos métodos de determinação do PBM nesses ecossistemas. O presente trabalho foi realizado com o objetivo de avaliar métodos de determinação do PBM em solo com diferentes coberturas vegetais. O trabalho consistiu da análise de amostras de Latossolo Vermelho-Amarelo distrófico muito argiloso (LVAd) localizado no município de Viçosa (MG), coletadas nas profundidades de 0 a 5 e 5 a 10 cm, em áreas com as seguintes coberturas vegetais: pínus (Pinus taeda), eucalipto (Eucalyptus grandis) e floresta nativa. Para determinação do P microbiano, foram empregados os métodos fumigação-extração (FE), irradiação com micro-ondas-extração (IE) e irradiação com micro-ondas-extração com membrana de troca aniônica (EMTA). em termos gerais, menores teores de PBM foram obtidos com o método irradiação-extração. Considerando a cobertura vegetal, foi detectada diferença significativa entre os três métodos sob floresta de eucalipto e floresta nativa, principalmente na camada superficial. Sob pínus, apenas o método IE diferiu dos demais, na camada subsuperficial. Menores coeficientes de variação (CV) foram obtidos com o FE, retratando maior precisão do método. Entretanto, o método IE mostrou-se, em termos operacionais, o mais adequado à determinação do PBM quando se tem maior número de amostras. Com relação às coberturas vegetais, a grande variabilidade observada nos CVs obtidos para cada cobertura, nos três métodos testados, inviabiliza a escolha de um único método que apresente maior precisão na avaliação do PBM.

Variabilidade e correlações entre caracteres agronômicos em caupi (Vigna unguiculata)

O caupi (Vigna unguiculata (L.) Walp) é um alimento básico das populações do Nordeste brasileiro, devendo merecer atenção com vistas a melhoria da qualidade de grãos, resistência a doenças e pragas e aumento de produtividade. Este trabalho teve por objetivo estudar a variabilidade e o potencial genético de 28 linhagens, escolhidas após uma seleção para cor, tamanho de grãos e resistência a viroses. A produtividade apresentou coeficiente de variação genético de 23,90%, e o valor agronômico, de 3,56%. O número de vagens por pedúnculo apresentou a menor estimativa do coeficiente de determinação genético (4,51%), e o peso de 100 grãos, a maior (81,74%). O coeficiente de determinação genético da produtividade foi de 34,15%. As maiores estimativas de ganho genético foram as do peso de 100 grãos (21,73%) e da produtividade (19,77%). As correlações genotípicas foram superiores às fenotípicas e às de ambiente, destacando-se as correlações entre número de ramos secundários e produtividade (68,13%), e valor agronômico e produtividade (100%). Estes resultados mostram amplas possibilidades de seleção entre as linhagens com relação à maioria dos caracteres estudados.

Tratamento de toletes de cana-de-açúcar para o controle da podridão-abacaxi em pulverização conjugada ao plantio mecanizado

No plantio mecanizado da cana-de-açúcar, há dificuldades em se proteger a cultura contra pragas e doenças do solo, requerendo uma tecnologia de aplicação de produtos fitossanitários que respeite o ambiente e os custos de produção. O objetivo deste trabalho foi avaliar um sistema de pulverização para controle de doenças e pragas do solo, conjugado ao equipamento de plantio mecanizado de toletes de cana-de-açúcar, tomando como alvo-indicador a podridão-abacaxi. Delineou-se o experimento em blocos ao acaso, em área de plantio comercial da variedade SP-891115. A pulverização deu-se na região da calha do equipamento de plantio, por onde os toletes deslizam até o solo. Avaliaram-se o número de perfilhos brotados e a produção da cultura. Os resultados foram comparados pelo número e percentagem de perfilhos e pelo acréscimo na produção em relação à testemunha não-tratada. Com base nos resultados observados, concluiu-se que o sistema de pulverização de produtos fitossanitários conjugado ao plantio mecanizado proporcionou a recuperação da produtividade na cultura da cana-de-açúcar de até 15%, na maior dose utilizada para o controle da podridão-abacaxi, demonstrando ser promissor para o tratamento de toletes e visando à proteção contra doenças e pragas de solo.

Produção de mudas de essências florestais em diferentes substratos e acompanhamento do desenvolvimento em campo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Charcoal production using tropical pine thinnings

In Brazil, the wood from pine-plantation thinnings is difficult to sell. However, these wood thinnings could be used to produce charcoal. The physical and chemical properties of charcoal produced from logs or first and fourth thinnings of Pinus caribaea var. hondurensis and Pinus oocarpa were determined. Similar properties were also determined for sawmill slabs cut from first and fourth thinnings. Properties were compared to charcoal made from pine materials and 7-yr-old Eucalyptus grandis. Results show that Pinus spp had better chemical properties than did E. grandis. In contrast, charcoal obtained from E. grandis had higher values of apparent density and lower values of bulk density than did Pinus spp. © 1992.

Estudos hídricos com substratos vegetais para cultivo de orquídeas epífitas

Different growing media were compared as to water adsorption and water loss, at Jaboticabal, SP, Brazil, through a three-year period. The objective was to recommend substrates other than tree fern fiber for cultivation of epiphytic orchids. Two treatments of each substrate were used in each sampling: materials stored in laboratory (without use) and materials exposed to conditions of orchid cultivation under laths (used). Generally, the substrates without use adsorbed less water than used substrates. When materials without use were compared, the tree fern fiber retained initially the greatest quantity of water and the blocks of pressed coconut bark, the smallest. However, these blocks gained a great capacity of water adsorption after being used. Charcoal added to the growing media did not cause significant alterations in the studied characteristics. In terms of water relations, the best growing media to substitute the tree fern fiber were composed by blocks of pressed coconut bark or by mixtures of this material with charcoal or Eucalyptus grandis bark. Bark of E grandis alone or in mixture with charcoal did not give good results.

Growth of Dendrobium nobile Lindl. as related with nutrient concentration in the growing media

Dendrobium nobile orchids were grown for three years in different substrates (tree fern fiber, blocks of pressed coconut bark, bark of Eucalyptus grandis, mixtures with coconut bark blocks and eucalyptus bark and mixtures with the latter materials and charcoal. Plant growth increased with higher concentrations of S (up to 1.6 g/kg), Cu (up to 46 mg/kg) and Zn (up to 147 mg/kg), and decreased with higher concentrations of Ca (up to 13.2 g/kg), Mg (up to 6.6 g/kg) and B (up to 19 mg/kg). High Mo (up to 5.3 mg/kg) caused a more intense loss of leaves after planting. Relations between nutrient concentrations also affected plant growth. With exception of eucalyptus bark, all growing media under study were suitable for plant growth.

Faixas de controle de plantas daninhas e seus reflexos no crescimento de plantas de eucalipto

Two field trial were conducted in Eucalyptus grandis W. Hill ex Maiden x Eucalyptus urophylla S.T. Blake crops at Três Lagoas, Mato Grosso do Sul State and Brotas, São Paulo State, Brazil, to evaluate the effects of weed control in strip of different width on the Eucalyptus plant growth. The experiments consisted of two groups treatments: group 1 - with constant width control strips being kept during the first 12 months, i.e., at 0, 25, 50, 100, 125 and 150cm on each side of the Eucalyptus row and, group 2: with increasing width control strips being adopted along the experimental period, i.e., at 25 to 150, 25-50-150, 50 to 150, 50-125-150, 100-125-150, 100 tot 150 and 125 to 150 cm on each side of the Eucalyptus row during the first 12 months. At 49 moths after planting it was verified that the Eucalyptus plants that had grown both in the constant and increasing width control strips, equal to or higher than 100 and 50 cm, respectively, showed higher steam diameter, plant height, volume and annual increment average of wood. These results led to the conclusion that the minimum control strip width should be 100 cm on each side of the Eucalyptus row in order to keep the crop free of weed interference.

Uso de biossólido como substrate para produção de mudas de eucalipto

The objective of this study was to evaluate the feasibility of the biosolids used as substrate component for seedlings production of Eucalyptus. This way, different proportions of biosolid/carbonized rice (80/20, 70/30, 60/40, 50/05 and 40/60) were tested as substrates in mixture, which were compared to the common substrate used by forest nursery (Multiplant®), as control. The experiment was established with Eucalyptus grandis where growth seedlings-related parameters were assessed: shoot height, collar diameter, accumulation of dry matter on the shoot and root, chemical analysis of the vegetal tissue of aerial part and root, foliar area and chlorophyll content. The results revealed that Eucalypts seedlings developed in substrate with 50% biosolid were similar to the control in relation to the evaluated parameters, concluding that the use of biosolids for seedlings production is quite promising.

Avaliação da distribuição da densidade em MDF a partir da técnica da onda de ultra-som

The goal of this research was to determine the density distribution in medium density fiberboard (MDF), manufactured with polyurethane derived from castor oil using, ultrasonic wave technique. The equipment used in this test is Steinkamp BP7 with plan and exponential transducers, both with 45 kHz frequencies, located in several zones on the plate in order to determine wave ultrasonic velocity. The Pinus caribaea and Eucalyptus grandis fiberboard were manufactured in the quality control and products development laboratory of Duratex with 500 mm long, 500 mm large, 8 and 15 mm of thickness. Three MDF for each fiber specimen and thickness were fabricated, totalizing twelve plates tested. The MDF were produced with 5% polyurethane addition, in temperature of 160°C, tension press of 53 bars and addition of moisture content of 12%. For determination of fiberboard density, samples were extracted from the same zones where the wave ultrasonic velocity was determined. In this case, DAX-Ray equipment was used. Statistical analysis shows good agreement with wave ultrasonic velocity and the density profile, validating the application of non-destructive technique in order to determine the density profile of MDF's.

Desenvolvimentos da biopolpação no Brasil

Biopulping is a technology which application can be advantageous to mechanical or chemical pulping. It presents benefits such as the creation of stronger pulp, as well as energy or chemicals savings. This paper gives an overview of the recent efforts to develop biopulping processes in Brazil as well as provides critical information on biopulping development worldwide. Eucalyptus grandis wood chips have been biotreated by Ceriporiopsis subvermispora in a 50-ton biopulping pilot-plant and used to produce TMP and CTMP pulps on a mill scale, Up to 18% and 27% energy savings have been observed for producing 450-470 CSFreeness TMP and CTMP pulps. Despite darker bio-TMP pulps are produced, one-stage bleaching with 5% H2O2 was sufficient to improve brightness values to 70% and 72% for bio-TMP and control pulps, respectively. Understanding biopulping mechanisms is also relevant because more resistant and competitive fungal species could be selected with basis on a function-directed screen-ing project. As far as the chemical changes induced by the fungus in wood are concerned, recent efforts have pointed out for two different types of wood transformations. One of them involves intense lignin depolymerization in short biotreatment periods, while the other indicates that esterification reactions of oxalate secreted by the Jungas on the polysaccharides chains increase the water saturation point of the fibers. Both transformations are expected to affect the fiber-fiber bonding and, consequently, the physical resistance of wood.