The measurement of applied forces during anterior single rod correction of adolescent idiopathic scoliosis

Adolescent idiopathic scoliosis (AIS) is the most common form of spinal deformity in paediatrics, prevalent in approximately 2-4% of the general population. While it is a complex three-dimensional deformity, it is clinically characterised by an abnormal lateral curvature of the spine. The treatment for severe deformity is surgical correction with the use of structural implants. Anterior single rod correction employs a solid rod connected to the anterior spine via vertebral body screws. Correction is achieved by applying compression between adjacent vertebral body screws, before locking each screw onto the rod. Biomechanical complication rates have been reported as high as 20.8%, and include rod breakage, screw pull-out and loss of correction. Currently, the corrective forces applied to the spine are unknown. These forces are important variables to consider in understanding the biomechanics of scoliosis correction. The purpose of this study was to measure these forces intra-operatively during anterior single rod AIS correction.

The effect of bone graft type on fusion rates following anterior thoracoscopic scoliosis correction

Bone graft is generally considered fundamental in achieving solid fusion in scoliosis correction and pseudarthrosis following instrumentation may predispose to implant failure. In thoracoscopic anterior-instrumented scoliosis surgery, autologous rib or iliac crest graft has been utilised traditionally but both techniques increase operative duration and cause donor site morbidity. Allograft bone and bone morphogenetic protein (BMP) alternatives may improve fusion rates but this remains controversial. This study's objective was to compare two-year postoperative fusion rates in a series of patients who underwent thoracoscopic anterior instrumentation for thoracic scoliosis utilising various bone graft types.

A study of Australian company responses to email complaints

As businesses and organisations move online, many question how to use Internet communication tools effectively, such as Web sites and electronic mail (Porter, 2001). Where and how should they invest their time and money in technology? This research explores a small part of this broad question, online complaining and electronic customer service. This paper extends prior US-based research of consumer complaints by email (Strauss and Hill, 2001) in several ways. First, it replicates their research in an Australian setting. Second, this research addresses several future research issues that Strauss and Hill (2001) raised. And third, this paper uses diffusion of innovation (Rogers, 1995) to explain some of the results. The results partially support the findings of Strauss and Hill (2001), take a small step towards further investigation of effective email responses and provide practical suggestions for better email customer service.

Location constraints in digital rights management

Digital rights management allows information owners to control the use and dissemination of electronic documents via a machine-readable licence. This paper describes the design and implementation of a system for creating and enforcing licences containing location constraints that can be used to restrict access to sensitive documents to a defined area. Documents can be loaded onto a portable device and used in the approved areas, but cannot be used if the device moves to another area. Our contribution includes a taxonomy for access control in the presence of requests to perform non-instantaneous controlled actions.

The Clubcultures Reader: Readings in Popular Cultural Studies

This reader in popular cultural studies meets the need for an up-to-date collection of readings on contemporary youth cultures and youth music. Table of Content: Introduction: Reading Pop(ular) Cult(ural) Stud(ie)s: Steve Redhead. Part I: Theory I:. 1. Pearls and Swine: Intellectuals and the Mass Media: Simon Frith and Jon Savage. 2. Over-the-Counter Culture: Retheorising Resistance in Popular Culture: Beverly Best. Part II: Commentaries. 3. Organised Disorder: The Changing Space of the Record Shop: Will Straw. 4. Spatial Politics: A Gendered Sense of Place: Cressida Miles. 5. Let's All Have a Disco? Football, Popular Music and Democratisation: Adam Brown. 6. Rave Culture: Living Dream or Living Death?: Simon Reynolds. 7. Fear and Lothing in Wisconsin: Sarah Champion. 8. The House Sound of Chicago: Hillegonda Rietveld. 9. Cocaine Girls: Marek Kohn. 10. In the Supermarket of Style: Ted Polhemus. 11. Love Factory: The Sites, Practices and Media Relationships of Northern Soul: Kate Milestone. 12. DJ Culture: Dave Haslam. Plates: Patrick Henry. Part III: Theory II: . 13. The Post-Subculturalist: David Muggleton. 14. Reading Pop: The Press, the Scholar and the Consequences of Popular Cultural Studies: Steve Jones. 15. Re-placing Popular Culture: Lawrence Grossberg. Index.

Development of a computer simulation tool for application in adolescent spinal deformity surgery

Scoliosis is a three-dimensional spinal deformity which requires surgical correction in progressive cases. In order to optimize correction and avoid complications following scoliosis surgery, patient-specific finite element models (FEM) are being developed and validated by our group. In this paper, the modeling methodology is described and two clinically relevant load cases are simulated for a single patient. Firstly, a pre-operative patient flexibility assessment, the fulcrum bending radiograph, is simulated to assess the model's ability to represent spine flexibility. Secondly, intra-operative forces during single rod anterior correction are simulated. Clinically, the patient had an initial Cobb angle of 44 degrees, which reduced to 26 degrees during fulcrum bending. Surgically, the coronal deformity corrected to 14 degrees. The simulated initial Cobb angle was 40 degrees, which reduced to 23 degrees following the fulcrum bending load case. The simulated surgical procedure corrected the coronal deformity to 14 degrees. The computed results for the patient-specific FEM are within the accepted clinical Cobb measuring error of 5 degrees, suggested that this modeling methodology is capable of capturing the biomechanical behaviour of a scoliotic human spine during anterior corrective surgery.

Are combination forecasts of S&P 500 volatility statistically superior?

Forecasting volatility has received a great deal of research attention, with the relative performances of econometric model based and option implied volatility forecasts often being considered. While many studies find that implied volatility is the pre-ferred approach, a number of issues remain unresolved, including the relative merit of combining forecasts and whether the relative performances of various forecasts are statistically different. By utilising recent econometric advances, this paper considers whether combination forecasts of S&P 500 volatility are statistically superior to a wide range of model based forecasts and implied volatility. It is found that a combination of model based forecasts is the dominant approach, indicating that the implied volatility cannot simply be viewed as a combination of various model based forecasts. Therefore, while often viewed as a superior volatility forecast, the implied volatility is in fact an inferior forecast of S&P 500 volatility relative to model-based forecasts.

Public sector legislation in Queensland : old or new directions

It has been 150 years since the Queensland public service was established. This paper looks back over the successive civil and public service acts in Queensland from 1859 to 2009, to examine the why the acts were passed, the changing structure of the public sector and the political justifications for the changes. It will establish how much has changed and how much has stayed the same over 150 years. Discussions regarding the success of the public service acts will be approached from an accountability perspective and will work to determine how effective the legislation has been in creating an independent and efficient public sector. The paper will demonstrate that change has occurred but some of it has turned back on itself;proposals that were rejected in the past have reappeared as fresh ideas and innovations. Finally, the paper will make conclusions as to the progress or repetition of public sector legislation in Queensland.

Introduction to the development of the ISPCAN child abuse screening tools

The World Report on Children and Violence, (Pinheiro, 2006) was produced at the request of the UN Secretary General and the UN General Assembly. This report recommended improvement in research on child abuse. ISPCAN representatives took this charge and developed 3 new instruments. We describe this background and introduce three new measures designed to assess the incidence and prevalence of child abuse and neglect.

Metaheuristic approaches to the hybrid flow shop scheduling problem with a cost-related criterion

In the paper, the flow-shop scheduling problem with parallel machines at each stage (machine center) is studied. For each job its release and due date as well as a processing time for its each operation are given. The scheduling criterion consists of three parts: the total weighted earliness, the total weighted tardiness and the total weighted waiting time. The criterion takes into account the costs of storing semi-manufactured products in the course of production and ready-made products as well as penalties for not meeting the deadlines stated in the conditions of the contract with customer. To solve the problem, three constructive algorithms and three metaheuristics (based one Tabu Search and Simulated Annealing techniques) are developed and experimentally analyzed. All the proposed algorithms operate on the notion of so-called operation processing order, i.e. the order of operations on each machine. We show that the problem of schedule construction on the base of a given operation processing order can be reduced to the linear programming task. We also propose some approximation algorithm for schedule construction and show the conditions of its optimality.