Alterations of neocortical pyramidal cell phenotype in the Ts65Dn mouse model of Down syndrome: Effects of environmental enrichment

Mental retardation in individuals with Down syndrome (DS) is thought to result from anomalous development and function of the brain; however, the underlying neuropathological processes have yet to be determined. Early implementation of special care programs result in limited, and temporary, cognitive improvements in DS individuals. In the present study, we investigated the possible neural correlates of these limited improvements. More specifically, we studied cortical pyramidal cells in the frontal cortex of Ts65Dn mice, a partial trisomy of murine chromosome 16 (MMU16) model characterized by cognitive deficits, hyperactivity, behavioral disruption and reduced attention levels similar to those observed in DS, and their control littermates. Animals were raised either in a standard or in an enriched environment. Environmental enrichment had a marked effect on pyramidal cell structure in control animals. Pyramidal cells in environmentally enriched control animals were significantly more branched and more spinous than non-enriched controls. However, environmental enrichment had little effect on pyramidal cell structure in Ts65Dn mice. As each dendritic spine receives at least one excitatory input, differences in the number of spines found in the dendritic arbors of pyramidal cells in the two groups reflect differences in the number of excitatory inputs they receive and, consequently, complexity in cortical circuitry. The present results suggest that behavioral deficits demonstrated in the Ts65Dn model could be attributed to abnormal circuit development.

A yield architecture framework to explain adaptation of pearl millet to environmental stress

Functional knowledge of the physiological basis of crop adaptation to stress is a prerequisite for exploiting specific adaptation to stress environments in breeding programs. This paper presents an analysis of yield components for pearl millet, to explain the specific adaptation of local landraces to stress environments in Rajasthan, India. Six genotypes, ranging from high-tillering traditional landraces to low-tillering open-pollinated modern cultivars, were grown in 20 experiments, covering a range of nonstress and drought stress patterns. In each experiment, yield components (particle number, grain number, 100 grain mass) were measured separately for main shoots, basal tillers, and nodal tillers. Under optimum conditions, landraces had a significantly lower grain yield than the cultivars, but no significant differences were observed at yield levels around 1 ton ha(-1). This genotype x environment interaction for grain yield was due to a difference in yield strategy, where landraces aimed at minimising the risk of a crop failure under stress conditions, and modem cultivars aimed at maximising yield potential under optimum conditions. A key aspect of the adaptation of landraces was the small size of the main shoot panicle, as it minimised (1) the loss of productive tillers during stem elongation; (2) the delay in anthesis if mid-season drought occurs; and (3) the reduction in panicle productivity of the basal tillers under stress. In addition, a low investment in structural panicle weight, relative to vegetative crop growth rate, promoted the production of nodal tillers, providing a mechanism to compensate for reduced basal tiller productivity if stress occurred around anthesis. A low maximum 100 grain mass also ensured individual grain mass was little affected by environmental conditions. The strategy of the high-tillering landraces carries a yield penalty under optimum conditions, but is expected to minimise the risk of a crop failure, particularly if mid-season drought stress occurs. The yield architecture of low-tillering varieties, by contrast, will be suited to end-of-season drought stress, provided anthesis is early. Application of the above adaptation mechanisms into a breeding program could enable the identification of plant types that match the prevalent stress patterns in the target environments. (C) 2003 E.J. van Oosterom. Published by Elsevier Science B.V. All rights reserved.

Análise espacial do padrão de introdução e disseminação da dengue nos municípios do Espírito Santo

O número de municípios infestados pelo Aedes aegypti no Estado do Espírito Santo vem aumentando gradativamente, levando a altas taxas de incidência de dengue ao longo dos anos. Apesar das tentativas de combate à doença, esta se tornou uma das maiores preocupações na saúde pública do Estado. Este estudo se propõe a descrever a dinâmica da expansão da doença no Estado a partir da associação entre variáveis ambientais e populacionais, utilizando dados operacionalizados por meio de técnicas de geoprocessamento. O estudo utilizou como fonte de dados a infestação pelo mosquito vetor e o coeficiente de incidência da doença, as distâncias rodoviárias intermunicipais do Estado, a altitude dos municípios e as variáveis geoclimáticas (temperatura e suficiência de água), incorporadas a uma ferramenta operacional, as Unidades Naturais do Espírito Santo (UNES), representadas em um único mapa operacionalizado em Sistema de Informação Geográfica (SIG), obtido a partir do Sistema Integrado de Bases Georreferenciadas do Estado do Espírito Santo. Para análise dos dados, foi realizada a Regressão de Poisson para os dados de incidência de dengue e Regressão Logística para os de infestação pelo vetor. Em seguida, os dados de infestação pelo mosquito e incidência de dengue foram georreferenciados, utilizando como ferramenta operacional o SIG ArcGIS versão 9.2. Observou-se que a pluviosidade é um fator que contribui para o surgimento de mosquito em áreas não infestadas. Altas temperaturas contribuem para um alto coeficiente de incidência de dengue nos municípios capixabas. A variável distância em relação a municípios populosos é um fator de proteção para a incidência da doença. A grande variabilidade encontrada nos dados, que não é explicada pelas variáveis utilizadas no modelo para incidência da doença, reforça a premissa de que a dengue é condicionada pela interação dinâmica entre muitas variáveis que o estudo não abordou. A espacialização dos dados de infestação pelo mosquito e incidência de dengue e as Zonas Naturais do ES permitiu a visualização da influência das variáveis estatisticamente significantes nos modelos utilizados no padrão da introdução e disseminação da doença no Estado.

Variabilidade genética em famílias de meios-irmãos de cafeeiro robusta

O cultivo do café é uma das atividades do agronegócio de maior importância socioeconômica dentre as diferentes atividades ligadas ao comércio agrícola mundial. Uma das maiores contribuições da genética quantitativa para o melhoramento genético é a possibilidade de prever ganhos genéticos. Quando diferentes critérios de seleção são considerados, a predição de ganhos referentes a cada critério tem grande importância, pois indica os melhoristas sobre como utilizar o material genético disponível, visando obter o máximo de ganhos possível para as características de interesse. O presente trabalho foi instalado em julho de 2004, na Fazenda Experimental de Bananal do Norte, conduzida pelo Incaper, no distrito de Pacotuba, município de Cachoeiro de Itapemirim, região Sul do Estado, com o objetivo de selecionar as melhores plantas entre e dentro de progênies de meios- irmãos de Coffea canephora, por meio de diferentes critérios de seleção. Foram realizadas análises de variância individuais e conjuntas para 26 progênies de meios- irmãos Coffea canephora. O delineamento experimental utilizado foi em blocos ao acaso com quatro testemunhas adicionais com quatro repetições e parcela composta por cinco plantas, com o espaçamento de 3,0 m x 1,2 m. Neste trabalho, considerou-se os dados das últimas cinco colheitas. As características mensuradas foram: florescimento, maturação, tamanho do grão, peso, porte, vigor, ferrugem, mancha cercóspora, seca de ponteiros, escala geral, porcentagem de frutos boia e bicho mineiro. Todas as análises estatísticas foram realizadas com o aplicativo computacional em genética e estatística (GENES). Foram estimados os ganhos de seleção em função da porcentagem de seleção de 20% entre e dentro, sendo as mesmas mantidas para todas as características. Todas as características foram submetidas a seleção no sentido positivo, exceto para florescimento, porte, ferrugem, mancha cercóspora, seca de ponteiros, porcentagem de frutos boia e bicho mineiro, para obter decréscimo em suas médias originais. Os critérios de seleção estudados foram: seleção convencional entre e dentro das famílias, índice de seleção combinada, seleção massal e seleção massal estratificada. Esta dissertação é composta por dois capítulos, em que foram realizadas análises biométricas, como a obtenção de estimativas de parâmetros genéticos. Na maioria das características estudadas, verificaram-se diferenças significativas (P<0,05) para genótipos que, associados aos coeficientes de variação genotípicos e também ao coeficiente de determinação genotípico e à relação CVg/CVe, indicam a existência de variabilidade genética nos materiais genéticos para a maioria das características e condições favoráveis para obtenção de ganhos genéticos pela seleção. Essas características também foram correlacionadas. Os dados foram submetidos às análises de variância e multivariada, aplicando-se a técnica de agrupamento e UPGMA, teste de médias e estudo de correlações. Na técnica de agrupamento, foi utilizada a distância generalizada de Mahalanobis como medida de dissimilaridade, e na delimitação dos grupos, o método de Tocher. Foi encontrada diversidade genética para as características associadas à qualidade fisiológica, mobilização de reserva das sementes, dimensões e biomassa das plântulas. Quatro grupos de genótipos puderam ser formados. Peso de massa seca de sementes, redução de reserva de sementes e peso de massa seca de plântulas estão positivamente correlacionados entre si, enquanto a redução de reserva das sementes e a eficiência na conversão dessas reservas em plântulas estão negativamente correlacionadas. De acordo com os resultados obtidos, verificou-se que todas as características apresentaram níveis diferenciados de variabilidade genética e os critérios de seleção utilizados mostraram-se eficientes para o melhoramento, no qual o índice de seleção combinada é o critério de seleção que apresentou os melhores resultados em termos de ganhos, sendo indicado como critério mais apropriado para o melhoramento genético da população estudada. Nos estudos de correlações, em 70% dos casos, a correlação fenotípica foi superior à genotípica, mostrando maior influência dos fatores ambientais em relação aos genotípicos e condições propícias ao melhoramento dos diferentes caracteres. No estudo de divergência genética, observou-se que pelo agrupamento de genótipos, pela técnica de Tocher, indicou que os genótipos foram distribuídos em três grupos.

Utilização da lógica fuzzy na geração de zonas de manejo

Este trabalho teve como objetivo utilizar a lógica fuzzy para geração de zonas de manejo, na área agrária e ambiental. Uma das aplicações consistiu da utilização do método fuzzy C-means, para geração de zonas de manejo para a cultura do mamoeiro, em um plantio comercial localizado em São Mateus-ES, com base em determinações realizadas através de amostragens e análises químicas do solo, considerando os atributos: P, K, Ca, Mg, e Saturação por bases (V%). Aplicou-se também a lógica fuzzy para desenvolver e executar um procedimento para dar suporte ao processo de tomada de decisões, envolvendo análise multicritério, gerando mapas de adequabilidade ao uso público e a conservação no Parque Estadual da Cachoeira da Fumaça, no município de Alegre-ES, considerando como fatores a localização da cachoeira, o uso do solo, os recursos hídricos, as trilhas, os locais de acessos, a infraestrutura, a declividade da área, e utilizando a abordagem de Sistema de Informações Geográficas para análise e combinação da base de dados. A partir das zonas de manejo geradas, foi possível explicar a variabilidade espacial dos atributos do solo na área de estudo da cultura do mamoeiro, e observa-se que as similaridades entre as zonas geradas, a partir de diferentes atributos, mostrou variação, mas observa-se uma influência nos dados, principalmente pelos atributos P e V. A partir do zoneamento da Unidade de Conservação foi possível selecionar áreas mais aptas ao ecoturismo, sendo encontradas próximas da cachoeira, trilhas em zonas de reflorestamento e de Mata Atlântica. Quanto às áreas propensas a medidas de conservação localizam-se próximas à cachoeira e às estruturas do parque, devido à maior pressão antrópica exercida nesses locais. Outras áreas que se destacaram, foram as áreas de pastagem, por estarem em estágio de regeneração natural. Os resultados indicam áreas de mesmo potencial de produção do mamoeiro, ou quando aplicado à área ambiental, áreas que devem receber maior cuidado para utilização por ecoturismo e para preservação e servem de base para a tomada de decisões, visando melhor aproveitamento da área.

Brazil and the economic, political, and environmental multilateralism: the Lula years (2003-2010)

This article discusses Brazil's multilateral policy under Luiz Inácio Lula da Silva's administration, highlighting economic, political and environmental themes. The main argument is that Brazil's multilateral relations during this government reached a new significance with the reinforcement of international coalitions and the articulation with the country's new development model. The country has been using multilateral forums as a way to achieve international projection and support for its development project, highlighting bargaining aspects, variable geometry coalitions and the strengthening of South-South cooperation

The G-77, BASIC, and global climate governance: a new era in multilateral environmental negotiations

The G-77 has historically organized the participation of developing countries in multilateral environmental negotiations. This article analyses the impact of a new coalition of emerging powers - Brazil, China, India, and South Africa as BASIC - on the G-77's role in climate governance. While there are important benefits for both sides in their relationship, I argue that the G-77 is also disadvantaged in several concrete ways by the BASIC countries.

Environmental issues and international relations, a new global (dis)order - the role of International Relations in promoting a concerted international system

Is it possible to talk about the rise of a new global (dis)order founded on the challenges posed by environmental issues? Through the review of the state of the art on the subject, this article analyzes the growing importance of the environment, and natural resources in particular, in international relations; and aims to raise awareness among International Relations scholars to the potential positive impact of the development of the discipline in integration with global environmental change studies.

Variability in leaf rust susceptibility among peach cultivars

The aim of this work was to estimate the susceptibility of thirty-six peach cultivars to leaf rust caused by Tranzschelia discolor f. sp. persica. The incidence and severity of the disease as well as defoliation in peach trees of an experimental orchard of Parana Federal University of Technology, Campus Dois Vizinhos were evaluated on the growing seasons 2004/2005 and 2005/2006. Immunity to this disease was not observed in the studied cultivars. There was difference in leaf rust intensity depending on the growing season conditions. Cultivars 'Pilcha', 'Sinuelo', 'Chirua', 'Sulina', 'Eldorado' and 'Pampeano' showed tolerance to leaf rust, whereas cultivars 'Vila Nova', 'Fla 1372', 'Coral 2', 'Chimarrita', 'Della Nona', 'BR-1 ' and 'Guaiaca' showed high susceptibility.

Integrating environmental and economic life cycle analysis in product development: a material selection case study

Purpose Achieving sustainability by rethinking products, services and strategies is an enormous challenge currently laid upon the economic sector, in which materials selection plays a critical role. In this context, the present work describes an environmental and economic life cycle analysis of a structural product, comparing two possible material alternatives. The product chosen is a storage tank, presently manufactured in stainless steel (SST) or in a glass fibre reinforced polymer composite (CST). The overall goal of the study is to identify environmental and economic strong and weak points related to the life cycle of the two material alternatives. The consequential win-win or trade-off situations will be identified via a Life Cycle Assessment/Life Cycle Costing (LCA/LCC) integrated model. Methods The LCA/LCC integrated model used consists in applying the LCA methodology to the product system, incorporating, in parallel, its results into the LCC study, namely those of the Life Cycle Inventory (LCI) and the Life Cycle Impact Assessment (LCIA). Results In both the SST and CST systems the most significant life cycle phase is the raw materials production, in which the most significant environmental burdens correspond to the Fossil fuels and Respiratory inorganics categories. The LCA/LCC integrated analysis shows that the CST has globally a preferable environmental and economic profile, as its impacts are lower than those of the SST in all life cycle stages. Both the internal and external costs are lower, the former resulting mainly from the composite material being significantly less expensive than stainless steel. This therefore represents a full win-win situation. As a consequence, the study clearly indicates that using a thermoset composite material to manufacture storage tanks is environmentally and economically desirable. However, it was also evident that the environmental performance of the CST could be improved by altering its End-of-Life stage. Conclusions The results of the present work provide enlightening insights into the synergies between the environmental and the economic performance of a structural product made with alternative materials. Further, they provide conclusive evidence to support the integration of environmental and economic life cycle analysis in the product development processes of a manufacturing company, or in some cases even in its procurement practices.

Spatial variability in nutritional status of arabic coffee based on dris index

The combined use of precision agriculture and the Diagnosis and Recommendation Integrated System (DRIS) allows the spatial monitoring of coffee nutrient balance to provide more balanced and cost-effective fertilizer recommendations. The objective of this work was to evaluate the spatial variability in the nutritional status of two coffee varieties using the Mean Nutritional Balance Index (NBIm) and its relationship with their respective yields. The experiment was conducted in eastern Minas Gerais in two areas, one planted with variety Catucaí and another with variety Catuaí. The NBIm of the two varieties and their yields were analyzed through geostatistics and, based on the models and parameters of the variograms, were interpolated to obtain their spatial distribution in the studied areas. Variety Catucai, with grater spatial variability, was more nutritional unbalanced than variety Catuai, and consequently produced lower yields. Excess of Fe and Mn makes these elements limiting yield factors.

The quest for a sustainable product: An environmental study of tyre recyclates

The main objective of the present study is to assess the environmental advantages of substituting aluminium for a polymer composite in the manufacture of a structural product (a frame to be used as a support for solar panels). The composite was made of polypropylene and a recycled tyres’ rubber granulate. Analysis of different composite formulations was performed, to assess the variation of the environmental impact with the percentage of rubber granulate incorporation. The results demonstrate that the decision on which of the two systems (aluminium or composite) has the best life cycle performance is strongly dependent on the End-of Life (EoL) stage of the composite frame. When the EoL is deposition in a landfill, the aluminium frame performs globally better than its composite counterpart. However, when it is incineration with energy recovery or recycling, the composite frame is environmentally preferable. The raw material production stage was found to be responsible for most of the impacts in the two frame systems. In that context, it was shown that various benefits can accrue in several environmental impact categories by recycling rubber tyres and using the resulting materials. This is in a significant part also due to the recycling of the steel in the tyres. The present work illustrates how it is possible to minimize the overall environmental impact of consumer products through the adequate selection of their constitutive materials in the design stage. Additionally it demonstrates how an adequate EoL planning can be an important issue when developing a sustainable product, since it can highly influence its overall life cycle performance.

Improving the environmental performance of bedding products by using life cycle assessment at the design stage

Improvement of the environmental performance of processes and products is a common objective in industry, and has been receiving increased attention in recent years. The main objective of this work is to evaluate the potential environmental impact of two bedding products, a polyurethane foam mattress (PFM) and a pocket spring mattress (PSM). These two types are the most common mattresses used in Europe. A Life Cycle Assessment (LCA) shows that the PFM has a higher environmental impact than the PSM. For both products the main cause of environmental impact is the manufacturing process, respectively the polyurethane foam block moulding process for the PFM, and the pocket spring nucleus process for the PSM. A scenario analysis shows the possibility of reducing the environmental impact of the products’ life cycle using an alternative End-of-Life scenario, resorting to incineration rather than landfill. Two strategies were also studied in order to reduce the environmental impact of the PFM: (1) reutilization of foam that was sent to the waste system management, and (2) a 20% weight reduction of the polyurethane foam. The second strategy has proven to be the most effective.

Determining factors of environmental management practices in portuguese local entities

Purpose: The aim of this paper is to analyse the development of environmental management practices by Portuguese local entities and their determining factors. Design/methodology/approach: The data were collected by sending a postal questionnaire. In order to measure the degree of development of environmental management practices an index of environmental management practices (EMPI) was developed, which reflects the extent to which a set of 16 environmental management practices have been implemented by the entities included in the sample. Four variables are considered in this study as possible factors that drive the development of environmental management practices by local entities, namely type of entity, size, proactive environmental strategy and Local Agenda 21 Findings: Results indicate the degree of development of environmental management practices in Portuguese local entities is low. Additionally, entity size, the adoption of proactive environmental strategies and the implementation of Local Agenda 21 are explaining factors of the degree of development of such practices. Originality/value: This study adds to the international research on environmental management in public sector by providing empirical data from a country, Portugal, where empirical evidence is still relatively limited.