Dynamic contrast agent -enhanced magnetic resonance imaging assessment of tumor microvasculature

Dynamic contrast agent-enhanced magnetic resonance imaging (DCE MRI) data, when analyzed with the appropriate pharmacokinetic models, have been shown to provide quantitative estimates of microvascular parameters important in characterizing the angiogenic activity of malignant tissue. These parameters consist of the whole blood volume per unit volume of tissue, v b, transport constant from the plasma to the extravascular, extracellular space (EES), k1 and the transport constant from the EES to the plasma, k2. Parameters vb and k1 are expected to correlate with microvascular density (MVD) and vascular permeability, respectively, which have been suggested to serve as surrogate markers for angiogenesis. In addition to being a marker for angiogenesis, vascular permeability is also useful in estimating tumor penetration potential of chemotherapeutic agents. ^ Histological measurements of the intratumoral microvascular environment are limited by their invasiveness and susceptibility to sampling errors. Also, MVD and vascular permeability, while useful for characterizing tumors at a single time point, have shown less utility in longitudinal studies, particularly when used to monitor the efficacy of antiangiogenic and traditional chemotherapeutic agents. These limitations led to a search for a non-invasive means of characterizing the microvascular environment of an entire tumor. ^ The overall goal of this project was to determine the utility of DCE MRI for monitoring the effect of antiangiogenic agents. Further applications of a validated DCE MRI technique include in vivo measurements of tumor microvascular characteristics to aid in determining prognosis at presentation and in estimating drug penetration. DCE MRI data were generated using single- and dual-tracer pharmacokinetic models with different molecular-weight contrast agents. The resulting pharmacokinetic parameters were compared to immunohistochemical measurements. The model and contrast agent combination yielding the best correlation between the pharmacokinetic parameters and histological measures was further evaluated in a longitudinal study to evaluate the efficacy of DCE MRI in monitoring the intratumoral microvascular environment following antiangiogenic treatment. ^

Corrélats neuronaux de la mémoire de travail en magnétoencéphalographie à l’état de repos

Purpose: There are few studies demonstrating the link between neural oscillations in magnetoencephalography (MEG) at rest and cognitive performance. Working memory is one of the most studied cognitive processes and is the ability to manipulate information on items kept in short-term memory. Heister & al. (2013) showed correlation patterns between brain oscillations at rest in MEG and performance in a working memory task (n-back). These authors showed that delta/theta activity in fronto-parietal areas is related to working memory performance. In this study, we use resting state MEG oscillations to validate these correlations with both of verbal (VWM) and spatial (SWM) working memory, and test their specificity in comparison with other cognitive abilities. Methods: We recorded resting state MEG and used clinical neuropsychological tests to assess working memory performance in 18 volunteers (6 males and 12 females). The other neuropsychological tests of the WAIS-IV were used as control tests to assess the specificity of the correlation patterns with working memory. We calculated means of Power Spectrum Density for different frequency bands (delta, 1-4Hz; theta, 4-8Hz; alpha, 8-13Hz; beta, 13-30Hz; gamma1, 30-59Hz; gamma2, 61-90Hz; gamma3, 90-120Hz; large gamma, 30-120Hz) and correlated MEG power normalised for the maximum in each frequency band at the sensor level with working memory performance. We then grouped the sensors showing a significant correlation by using a cluster algorithm. Results: We found positive correlations between both types of working memory performance and clusters in the bilateral posterior and right fronto-temporal regions for the delta band (r2 =0.73), in the fronto-middle line and right temporal regions for the theta band (r2 =0.63) as well as in the parietal regions for the alpha band (r2 =0.78). Verbal working memory and spatial working memory share a common fronto-parietal cluster of sensors but also show specific clusters. These clusters are specific to working memory, as compared to those obtained for other cognitive abilities and right posterior parietal areas, specially in slow frequencies, appear to be specific to working memory process. Conclusions: Slow frequencies (1-13Hz) but more precisely in delta/theta bands (1-8Hz), recorded at rest with magnetoencephalography, predict working memory performance and support the role of a fronto-parietal network in working memory.

Eph kinases and their ligands ephrins act in concert with sex hormones in regulating blood pressure

Les Erythropoietin-producing hepatocyte (EPH) sont la plus grande famille de récepteurs tyrosine kinase. Leurs ligands, les éphrines (EFNs), sont aussi des molécules exprimées à la surface cellulaire. Les EPH/EFNs sont impliqués dans de nombreux processus biologiques. L'hypertension artérielle (PA) est une maladie chronique qui, aujourd'hui, est devenue un problème médical critique dans le monde entier et un enjeu de santé publique. La découverte de nouvelles thérapeutiques de l'hypertension sont d'une grande importance pour la santé publique. Jusqu’à tout récemment, il existe seulement quelques études concernant le rôle de l’axe EPH/EFNs sur la fonction des cellules musculaires lisses vasculaires (CMLV). Dans nos études précédentes, nous avons montré qu'EPHB6 et EFNB1, de concert avec les hormones sexuelles, régulent la PA. Dans la présente étude, nous avons constaté que les différents membres de la famille EPH/EFN peuvent réguler soit positivement, soit négativement, la contractilité des CMLV et la PA: tandis que EPHB4 et EFNB2 appartiennent à la première catégorie, EFNB1, EFNB3 et EPHB6 appartiennent à la deuxième. In vivo, des souris males, mais non pas des femelles, porteuses d’une mutation EPHB4 (KO) spécifique du muscle lisse présentent une PA diminuée, comparée aux souris témoins (WT). Les CMLV de souris EPHB4 KO, en présence de testostérone, ont montré une contractilité réduite lors de la stimulation par la phényléphrine (PE). Au niveau moléculaire, la phosphorylation de la protéine kinase II dépendante de Ca2+/calmoduline et de la kinase de la chaine légère de la myosine (CLM) est augmentée, tandis que la phosphorylation de la kinase de la CLM est réduite dans les CMLV KO lors de la stimulation par PE, par rapport au WT CMLV. Cela fournit une base moléculaire à la réduction de la PA et de la contractilité des CMLV chez les souris EPHB4 KO. EFNB2 est le ligand majeur de l’EPHB4. Comme attendu, les souris EFNB2 KO spécifique du muscle lisse avaient un phénotype de PA semblable, quoique non identique, aux souris EPHB4 KO. Les souris mâles EFNB2 KO, mais pas femelles, sous régime régulier ou riche en sel, présentent une PA réduite, par rapport à leurs homologues WT. Au niveau cellulaire, les CMLV des souris KO ont montré une contractilité réduite lors de la stimulation par PE par rapport aux témoins WT. Une région de l’acide aminé (aa) 313 à l’aa 331 dans la partie intracellulaire d’EFNB2 est essentielle pour la signalisation inverse qui régule la contractilité des CMLV, selon des études de mutation-délétion. Dans une étude de génétique humaine, nous avons identifié, dans le gène EFNB2, six SNP qui étaient associées significativement au risque d'hypertension artérielle, de façon dépendante du sexe, ce qui corrobore nos résultats chez les souris. En revanche, la délétion du gène EFNB3 (KO) chez les souris femelles aboutit à une PA élevée et à une augmentation des résistances des petites artères in vivo, améliore la contractilité des petites artères ex-vivo et augmente la contractilité des CMLV in vitro. Les souris mâles KO ont une PA normale, mais la castration conduit à une augmentation significative de la PA dans les souris KO, mais pas dans les souris WT. Les CMLV des souris KO femelles ont montré une phosphorylation accrue de la CLM et une phosphorylation réduite de la kinase de la CLM, ce qui fournit à nouveau une base moléculaire aux phénotypes de PA et de contractilité des CMLV observés. Ce changement de signalisation est attribuable à une protéine adaptatrice Grip1. En effet, dans une étude d'association pan génomique par le Consortium International pour la Pression Sanguine, un SNP dans le gène GRIP1 a approché le seuil de significativité de la valeur p pour son association avec la pression diastolique. Nos recherches, pour la première fois, ont révélé que EPH/EFNs sont de nouveaux composants dans le système de régulation de la PA. Les membres de la famille EPH/EFN peuvent agir comme des forces Yin et Yang pour régler finement le tonus des vaisseaux pour assurer l'homéostasie de la PA et de sa régulation. Ces effets de EPH/EFNs dépendent du sexe et des niveaux d’hormones sexuelles. À partir de ces nouvelles connaissances, nous pourrions développer une nouvelle thérapie personnalisée pour l’hypertension artérielle, utilisant des antagonistes d'hormones sexuelles ou des thérapies de remplacement d'hormones sexuelles, selon les niveaux d'hormones sexuelles des patients et les mutations dans les gènes de l'EPH/EFN.

Eph kinases and their ligands ephrins act in concert with sex hormones in regulating blood pressure

Les Erythropoietin-producing hepatocyte (EPH) sont la plus grande famille de récepteurs tyrosine kinase. Leurs ligands, les éphrines (EFNs), sont aussi des molécules exprimées à la surface cellulaire. Les EPH/EFNs sont impliqués dans de nombreux processus biologiques. L'hypertension artérielle (PA) est une maladie chronique qui, aujourd'hui, est devenue un problème médical critique dans le monde entier et un enjeu de santé publique. La découverte de nouvelles thérapeutiques de l'hypertension sont d'une grande importance pour la santé publique. Jusqu’à tout récemment, il existe seulement quelques études concernant le rôle de l’axe EPH/EFNs sur la fonction des cellules musculaires lisses vasculaires (CMLV). Dans nos études précédentes, nous avons montré qu'EPHB6 et EFNB1, de concert avec les hormones sexuelles, régulent la PA. Dans la présente étude, nous avons constaté que les différents membres de la famille EPH/EFN peuvent réguler soit positivement, soit négativement, la contractilité des CMLV et la PA: tandis que EPHB4 et EFNB2 appartiennent à la première catégorie, EFNB1, EFNB3 et EPHB6 appartiennent à la deuxième. In vivo, des souris males, mais non pas des femelles, porteuses d’une mutation EPHB4 (KO) spécifique du muscle lisse présentent une PA diminuée, comparée aux souris témoins (WT). Les CMLV de souris EPHB4 KO, en présence de testostérone, ont montré une contractilité réduite lors de la stimulation par la phényléphrine (PE). Au niveau moléculaire, la phosphorylation de la protéine kinase II dépendante de Ca2+/calmoduline et de la kinase de la chaine légère de la myosine (CLM) est augmentée, tandis que la phosphorylation de la kinase de la CLM est réduite dans les CMLV KO lors de la stimulation par PE, par rapport au WT CMLV. Cela fournit une base moléculaire à la réduction de la PA et de la contractilité des CMLV chez les souris EPHB4 KO. EFNB2 est le ligand majeur de l’EPHB4. Comme attendu, les souris EFNB2 KO spécifique du muscle lisse avaient un phénotype de PA semblable, quoique non identique, aux souris EPHB4 KO. Les souris mâles EFNB2 KO, mais pas femelles, sous régime régulier ou riche en sel, présentent une PA réduite, par rapport à leurs homologues WT. Au niveau cellulaire, les CMLV des souris KO ont montré une contractilité réduite lors de la stimulation par PE par rapport aux témoins WT. Une région de l’acide aminé (aa) 313 à l’aa 331 dans la partie intracellulaire d’EFNB2 est essentielle pour la signalisation inverse qui régule la contractilité des CMLV, selon des études de mutation-délétion. Dans une étude de génétique humaine, nous avons identifié, dans le gène EFNB2, six SNP qui étaient associées significativement au risque d'hypertension artérielle, de façon dépendante du sexe, ce qui corrobore nos résultats chez les souris. En revanche, la délétion du gène EFNB3 (KO) chez les souris femelles aboutit à une PA élevée et à une augmentation des résistances des petites artères in vivo, améliore la contractilité des petites artères ex-vivo et augmente la contractilité des CMLV in vitro. Les souris mâles KO ont une PA normale, mais la castration conduit à une augmentation significative de la PA dans les souris KO, mais pas dans les souris WT. Les CMLV des souris KO femelles ont montré une phosphorylation accrue de la CLM et une phosphorylation réduite de la kinase de la CLM, ce qui fournit à nouveau une base moléculaire aux phénotypes de PA et de contractilité des CMLV observés. Ce changement de signalisation est attribuable à une protéine adaptatrice Grip1. En effet, dans une étude d'association pan génomique par le Consortium International pour la Pression Sanguine, un SNP dans le gène GRIP1 a approché le seuil de significativité de la valeur p pour son association avec la pression diastolique. Nos recherches, pour la première fois, ont révélé que EPH/EFNs sont de nouveaux composants dans le système de régulation de la PA. Les membres de la famille EPH/EFN peuvent agir comme des forces Yin et Yang pour régler finement le tonus des vaisseaux pour assurer l'homéostasie de la PA et de sa régulation. Ces effets de EPH/EFNs dépendent du sexe et des niveaux d’hormones sexuelles. À partir de ces nouvelles connaissances, nous pourrions développer une nouvelle thérapie personnalisée pour l’hypertension artérielle, utilisant des antagonistes d'hormones sexuelles ou des thérapies de remplacement d'hormones sexuelles, selon les niveaux d'hormones sexuelles des patients et les mutations dans les gènes de l'EPH/EFN.

In vitro mechanical fatigue behavior of poly-ε-caprolactone macroporous scaffolds for cartilage tissue engineering: Influence of pore filling by a poly(vinyl alcohol) gel

Polymeric scaffolds used in regenerative therapies are implanted in the damaged tissue and subjected to repeated loading cycles. In the case of articular cartilage engineering, an implanted scaffold is typically subjected to long term dynamic compression. The evolution of the mechanical properties of the scaffold during bioresorption has been deeply studied in the past, but the possibility of failure due to mechanical fatigue has not been properly addressed. Nevertheless, the macroporous scaffold is susceptible to failure after repeated loading-unloading cycles. In this work fatigue studies of polycaprolactone scaffolds were carried by subjecting the scaffold to repeated compression cycles in conditions simulating the scaffold implanted in the articular cartilage. The behaviour of the polycaprolactone sponge with the pores filled with a poly(vinyl alcohol) gel simulating the new formed tissue within the pores was compared with that of the material immersed in water. Results were analyzed with Morrow’s criteria for failure and accurate fittings are obtained just up to 200 loading cycles. It is also shown that the presence of poly(vinyl alcohol) increases the elastic modulus of the scaffolds, the effect being more pronounced with increasing the number of freeze/thawing cycles.

Mechanical behavior of isolated intervertebral disc

The study on several components of intervertebral joints is essential to understand the spine's degenerative mechanisms and to assess the best method for their treatment. For such study it is necessary to know the mechanical properties of the isolated intervertebral disc (ID) mechanical properties and, it is necessary to evaluate its stresses and strains. In order to assess the ID displacements, a fine, U-shaped blade was developed, over which two extensometers connected in a Wheatstone bridge were placed. The device was then tested on porcine spine ID, where compression loads were applied and the extremities displacements of the blade coupled to the intervertebral disc were measured. Stress/strain diagram, both on the compression and on the decompression phases, evidencing the non-linear nature of such relationship. With the experiment, it was possible to obtain approximate values of the longitudinal elasticity module (E) of the disc material and of the Poisson coefficient (n ). After several tests, E results are compatible with those obtained by others studies, with very simple and low-cost device. This experiments can be used for obtained others mechanical properties of isolated ID with precision and accuracy.

Characterization and in vitro evaluation of bacterial cellulose membranes functionalized with osteogenic growth peptide for bone tissue engineering

The aim of this study was to characterize the physicochemical properties of bacterial cellulose (BC) membranes functionalized with osteogenic growth peptide (OGP) and its C-terminal pentapeptide OGP[10-14], and to evaluate in vitro osteoinductive potential in early osteogenesis, besides, to evaluate cytotoxic, genotoxic and/or mutagenic effects. Peptide incorporation into the BC membranes did not change the morphology of BC nanofibers and BC crystallinity pattern. The characterization was complemented by Raman scattering, swelling ratio and mechanical tests. In vitro assays demonstrated no cytotoxic, genotoxic or mutagenic effects for any of the studied BC membranes. Culture with osteogenic cells revealed no difference in cell morphology among all the membranes tested. Cell viability/proliferation, total protein content, alkaline phosphatase activity and mineralization assays indicated that BC-OGP membranes enabled the highest development of the osteoblastic phenotype in vitro. In conclusion, the negative results of cytotoxicity, genotoxicity and mutagenicity indicated that all the membranes can be employed for medical supplies, mainly in bone tissue engineering/regeneration, due to their osteoinductive properties.

Mechanical properties and cellular response of novel electrospun nanofibers for ligament tissue engineering: Effects of orientation and geometry

Electrospun nanofibers are a promising material for ligamentous tissue engineering, however weak mechanical properties of fibers to date have limited their clinical usage. The goal of this work was to modify electrospun nanofibers to create a robust structure that mimics the complex hierarchy of native tendons and ligaments. The scaffolds that were fabricated in this study consisted of either random or aligned nanofibers in flat sheets or rolled nanofiber bundles that mimic the size scale of fascicle units in primarily tensile load bearing soft musculoskeletal tissues. Altering nanofiber orientation and geometry significantly affected mechanical properties; most notably aligned nanofiber sheets had the greatest modulus; 125% higher than that of random nanofiber sheets; and 45% higher than aligned nanofiber bundles. Modifying aligned nanofiber sheets to form aligned nanofiber bundles also resulted in approximately 107% higher yield stresses and 140% higher yield strains. The mechanical properties of aligned nanofiber bundles were in the range of the mechanical properties of the native ACL: modulus=158±32MPa, yield stress=57±23MPa and yield strain=0.38±0.08. Adipose derived stem cells cultured on all surfaces remained viable and proliferated extensively over a 7 day culture period and cells elongated on nanofiber bundles. The results of the study suggest that aligned nanofiber bundles may be useful for ligament and tendon tissue engineering based on their mechanical properties and ability to support cell adhesion, proliferation, and elongation.

Development and optimization of techniques and design parameters for the engineering of atmospheric pressure plasma devices for biomedical applications and plasma medicine

In the last decades, the possibility to generate plasma at atmospheric pressure gave rise to a new emerging field called plasma medicine; it deals with the application of cold atmospheric pressure plasmas (CAPs) or plasma-activated solutions on or in the human body for therapeutic effects. Thanks to a blend of synergic biologically active agents and biocompatible temperatures, different CAP sources were successfully employed in many different biomedical applications such as dentistry, dermatology, wound healing, cancer treatment, blood coagulation, etc.… Despite their effectiveness has been verified in the above-mentioned biomedical applications, over the years, researchers throughout the world described numerous CAP sources which are still laboratory devices not optimized for the specific application. In this perspective, the aim of this dissertation was the development and the optimization of techniques and design parameters for the engineering of CAP sources for different biomedical applications and plasma medicine among which cancer treatment, dentistry and bioaerosol decontamination. In the first section, the discharge electrical parameters, the behavior of the plasma streamers and the liquid and the gas phase chemistry of a multiwire device for the treatment of liquids were performed. Moreover, two different plasma-activated liquids were used for the treatment of Epithelial Ovarian Cancer cells and fibroblasts to assess their selectivity. In the second section, in accordance with the most important standard regulations for medical devices, were reported the realization steps of a Plasma Gun device easy to handle and expected to be mounted on a tabletop device that could be used for dental clinical applications. In the third section, in relation to the current COVID-19 pandemic, were reported the first steps for the design, realization, and optimization of a dielectric barrier discharge source suitable for the treatment of different types of bioaerosol.

A new approach to heart valve tissue engineering: mimicking the heart ventricle with a ventricular assist device in a novel bioreactor

The `biomimetic` approach to tissue engineering usually involves the use of a bioreactor mimicking physiological parameters whilst supplying nutrients to the developing tissue. Here we present a new heart valve bioreactor, having as its centrepiece a ventricular assist device (VAD), which exposes the cell-scaffold constructs to a wider array of mechanical forces. The pump of the VAD has two chambers: a blood and a pneumatic chamber, separated by an elastic membrane. Pulsatile air-pressure is generated by a piston-type actuator and delivered to the pneumatic chamber, ejecting the fluid in the blood chamber. Subsequently, applied vacuum to the pneumatic chamber causes the blood chamber to fill. A mechanical heart valve was placed in the VAD`s inflow position. The tissue engineered (TE) valve was placed in the outflow position. The VAD was coupled in series with a Windkessel compliance chamber, variable throttle and reservoir, connected by silicone tubings. The reservoir sat on an elevated platform, allowing adjustment of ventricular preload between 0 and 11 mmHg. To allow for sterile gaseous exchange between the circuit interior and exterior, a 0.2 mu m filter was placed at the reservoir. Pressure and flow were registered downstream of the TE valve. The circuit was filled with culture medium and fitted in a standard 5% CO(2) incubator set at 37 degrees C. Pressure and flow waveforms were similar to those obtained under physiological conditions for the pulmonary circulation. The `cardiomimetic` approach presented here represents a new perspective to conventional biomimetic approaches in TE, with potential advantages. Copyright (C) 2010 John Wiley & Sons, Ltd.

Theory manual to OctVCE – a cartesian cell CFD code with special application to blast wave problems, Department of Mechanical Engineering Report 2007/12

OctVCE is a cartesian cell CFD code produced especially for numerical simulations of shock and blast wave interactions with complex geometries, in particular, from explosions. Virtual Cell Embedding (VCE) was chosen as its cartesian cell kernel for its simplicity and sufficiency for practical engineering design problems. The code uses a finite-volume formulation of the unsteady Euler equations with a second order explicit Runge-Kutta Godonov (MUSCL) scheme. Gradients are calculated using a least-squares method with a minmod limiter. Flux solvers used are AUSM, AUSMDV and EFM. No fluid-structure coupling or chemical reactions are allowed, but gas models can be perfect gas and JWL or JWLB for the explosive products. This report also describes the code’s ‘octree’ mesh adaptive capability and point-inclusion query procedures for the VCE geometry engine. Finally, some space will also be devoted to describing code parallelization using the shared-memory OpenMP paradigm. The user manual to the code is to be found in the companion report 2007/13.

User guide for shock and blast simulation with the OctVCE code (version 3.5+), Department of Mechanical Engineering Report 2007/13

OctVCE is a cartesian cell CFD code produced especially for numerical simulations of shock and blast wave interactions with complex geometries. Virtual Cell Embedding (VCE) was chosen as its cartesian cell kernel as it is simple to code and sufficient for practical engineering design problems. This also makes the code much more ‘user-friendly’ than structured grid approaches as the gridding process is done automatically. The CFD methodology relies on a finite-volume formulation of the unsteady Euler equations and is solved using a standard explicit Godonov (MUSCL) scheme. Both octree-based adaptive mesh refinement and shared-memory parallel processing capability have also been incorporated. For further details on the theory behind the code, see the companion report 2007/12.

Effect of treadmill exercise on lumbar vertebrae in ovariectomized rats: anthropometrical and mechanical analyses

The purpose of this study was to examine the preventive effect of exercise on lumbar vertebrae in ovariectomized rats. Three-month-old female Wistar rats were divided into 3 groups: control group (A, n = 10); non-exercised ovariectomized group (B, n = 7) and exercised ovariectomized group (C, n = 7). The rats from group C were subjected to treadmill exercise (15 m/minute in the initial six weeks and 19 m/minute in the next six weeks, 1 hour/day, 4 days/week) for 12 weeks. At death, the fourth lumbar vertebrae were removed and an anthropometrical analysis by a paquimeter and a mechanical compression test by a universal test machine were performed. After 12 weeks, the ovariectomy decreased the superior-inferior vertebral height and the maximal braking load in group B compared to group A, while the exercise increased the vertebral mass in group C compared to both groups A and B (p < 0.01) and the stiffness compared to group B. We concluded the physical activity has an important role to prevent the osteopenia in lumbar vertebrae.