An Ecological and Evolutionary Framework for Commensalism in Anthropogenic Environments

Acknowledgements We would like to thank Jean-Denis Vigne, members of the Searle lab, and SNEEB at Cornell University for a stimulating environment and many early discussions and comments. We would also like to thank Maeve McMahon for comments on the manuscript.

Mutations Affecting Induction of Glycolytic and Fermentative Genes during Germination and Environmental Stresses in Arabidopsis1

Expression of the alcohol dehydrogenase gene (ADH) of Arabidopsis is known to be induced by environmental stresses and regulated developmentally. We used a negative-selection approach to isolate mutants that were defective in regulating the expression of the ADH gene during seed germination; we then characterized three recessive mutants, aar1–1, aar1–2, and aar2–1, which belong to two complementation groups. In addition to their defects during seed germination, mutations in the AAR1 and AAR2 genes also affected anoxic and hypoxic induction of ADH and other glycolytic genes in mature plants. The aar1 and aar2 mutants were also defective in responding to cold and osmotic stress. The two allelic mutants aar1–1and aar1–2 exhibited different phenotypes under cold and osmotic stresses. Based on our results we propose that these mutants are defective in a late step of the signaling pathways that lead to increased expression of the ADH gene and glycolytic genes.

Characterization of complex mineral assemblages: Implications for contaminant transport and environmental remediation

Surface reactive phases of soils and aquifers, comprised of phyllosilicate and metal oxohydroxide minerals along with humic substances, play a critical role in the regulation of contaminant fate and transport. Much of our knowledge concerning contaminant-mineral interactions at the molecular level, however, is derived from extensive experimentation on model mineral systems. Although these investigations have provided a foundation for understanding reactive surface functional groups on individual mineral phases, the information cannot be readily extrapolated to complex mineral assemblages in natural systems. Recent studies have elucidated the role of less abundant mineral and organic substrates as important surface chemical modifiers and have demonstrated complex coupling of reactivity between permanent-charge phyllosilicates and variable-charge Fe-oxohydroxide phases. Surface chemical modifiers were observed to control colloid generation and transport processes in surface and subsurface environments as well as the transport of solutes and ionic tracers. The surface charging mechanisms operative in the complex mineral assemblages cannot be predicted based on bulk mineralogy or by considering surface reactivity of less abundant mineral phases based on results from model systems. The fragile nature of mineral assemblages isolated from natural systems requires novel techniques and experimental approaches for investigating their surface chemistry and reactivity free of artifacts. A complete understanding of the surface chemistry of complex mineral assemblages is prerequisite to accurately assessing environmental and human health risks of contaminants or in designing environmentally sound, cost-effective chemical and biological remediation strategies.

Manganese oxide minerals: Crystal structures and economic and environmental significance

Manganese oxide minerals have been used for thousands of years—by the ancients for pigments and to clarify glass, and today as ores of Mn metal, catalysts, and battery material. More than 30 Mn oxide minerals occur in a wide variety of geological settings. They are major components of Mn nodules that pave huge areas of the ocean floor and bottoms of many fresh-water lakes. Mn oxide minerals are ubiquitous in soils and sediments and participate in a variety of chemical reactions that affect groundwater and bulk soil composition. Their typical occurrence as fine-grained mixtures makes it difficult to study their atomic structures and crystal chemistries. In recent years, however, investigations using transmission electron microscopy and powder x-ray and neutron diffraction methods have provided important new insights into the structures and properties of these materials. The crystal structures for todorokite and birnessite, two of the more common Mn oxide minerals in terrestrial deposits and ocean nodules, were determined by using powder x-ray diffraction data and the Rietveld refinement method. Because of the large tunnels in todorokite and related structures there is considerable interest in the use of these materials and synthetic analogues as catalysts and cation exchange agents. Birnessite-group minerals have layer structures and readily undergo oxidation reduction and cation-exchange reactions and play a major role in controlling groundwater chemistry.

Genetic and environmental factors modify bovine spongiform encephalopathy incubation period in mice

The incubation period (IP) and the neuropathology of transmissible spongiform encephalopathies (TSEs) have been extensively used to distinguish prion isolates (or strains) inoculated into panels of inbred mouse strains. Such studies have shown that the bovine spongiform encephalopathy (BSE) agent is indistinguishable from the agent causing variant Creutzfeldt–Jakob disease (vCJD), but differs from isolates of sporadic CJD, reinforcing the idea that the vCJD epidemic in Britain results from consumption of contaminated beef products. We present a mouse model for genetic and environmental factors that modify the incubation period of BSE cross-species transmission. We have used two mouse strains that carry the same prion protein (PrP) allele, but display a 100-day difference in their mean IP following intracerebral inoculation with primary BSE isolate. We report genetic effects on IP that map to four chromosomal regions, and in addition we find significant factors of host environment, namely the age of the host's mother, the age of the host at infection, and an X-cytoplasm interaction in the host.

Developmental and Environmental Effects on the Expression of the C3-C4 Intermediate Phenotype in Moricandia arvensis1

Cellular anatomy and expression of glycine decarboxylase (GDC) protein were studied during leaf development of the C3-C4 intermediate species Moricandia arvensis. Leaf anatomy was initially C3-like and the number and profile area of mitochondria in the bundle-sheath cells were the same as those in adjacent mesophyll cells. Between a leaf length of 6 and 12 mm there was a bundle-sheath-specific, 4-fold increase in the number of mitochondrial profiles, followed by a doubling of their individual profile areas as the leaves expanded further. Subunits of GDC were present in whole-leaf extracts before the anatomical development of bundle-sheath cells. Whereas the GDC H-protein content of leaves increased steadily throughout development, the increase in GDC P-protein was synchronous with the development of mitochondria in the bundle sheath. The P-protein was confined to bundle-sheath mitochondria throughout leaf development, and its content in individual mitochondria increased before the anatomical development of the bundle sheath. Anatomical and biochemical attributes of the C3-C4 character were present in the cotyledons and sepals but not in other photosynthetic organs/tissues. In leaves and cotyledons that developed in the dark, the expression of the P-protein and the organellar development were reduced but the bundle-sheath cell specificity was retained.

Discursive constructions of social and environmental accounting in Brazil: the case of Petrobras.

In the 29 years following \"Our Common Future\" by the United Nations, there is considerable debate among governments, civil society, interest groups and business organisations about what constitutes sustainable development, which constitutes evidence for a contested discourse concerning sustainability. The purpose of this study is to understand this debate in the developing economic context of Brazil, and in particular, to understand and critique the social and environmental accounting [SEA] discursive constructions relating to the State-owned, Petrobras as well as to understand the Brazilian literature on SEA. The discourse theory [DT]-based analysis employs rhetorical redescription to analyse twenty-two reports from Petrobras from 2004-2013. I investigate the political notions by employing the methodological framework of the Logics of Critical Explanation [LCE]. LCE engenders five methodological steps: problematisation, retroduction, logics (social, political and fantasmatic), articulation and critique. The empirical discussion suggests that the hegemony of economic development operates to obfuscate, rhetorically, the development of sustainability, so as to maintain the core business of Petrobras conceived as capital accumulation. Equally, these articulations also illustrate how the constructions of SEA operate to serve the company\'s purpose with few (none) profound changes in integration of sustainability. The Brazilian literature on SEA sustains the status quo of neo-liberal market policies that operate to protect the dominant business case approach to maintain an agenda of wealth-creation in relation to social and environmental needs. The articulations of the case manifested in policies regarding, for example, corruption, which involved over-payments for contracts and unsustainable practices relating to the use of fossil fuels and demonstrated that there was antagonism between action and disclosure. The corruption scandal that emerged after SEA disclosures highlighted the rhetorical nature of disclosure when financial resources were subtracted from the company for political parties and engineering contractors hid facts through incomplete disclosures. The articulations of SEA misrepresent a broader context of the meanings associated with sustainability, which restricted the constructions of SEA to principally serve and represent the intention of the most powerful groups. The significance of SEA, then is narrowed to represent particular interests. The study argues for more critical studies as limited Brazilian literature concerning SEA kept a \'safe distance\' from substantively critiquing the constructions of SEA and its articulations in the Brazilian context. The literature review and the Petrobras\' case illustrate a variety of naming, instituting and articulatory practices that endeavour to maintain the current hegemony of development in an emerging economy, which allows Petrobras to continue to exercise significant profit at the expense of the social and environmental. The constructed idea of development in Petrobras\' discourses emphasises a rhetoric of wider development, but, in reality, these discourses were the antithesis of political, social and ethical developmental issues. These constructions aim to hide struggles between social inequalities and exploitation of natural resources and constitute excuses about a fanciful notion of rhetorical and hegemonic neo-liberal development. In summary, this thesis contributes to the prior literature in five ways: (i) the addition of DT to the analysis of SEA enhances the discussion of political elements such as hegemony, antagonism, logic of equivalence/difference, ideology and articulation; (ii) the analysis of an emerging economy such as Brazil incorporates a new perspective of the discussion of the discourses of SEA and development; (iii) this thesis includes a focus on rhetoric to discuss the maintenance of the status quo; (iv) the holistic structure of the LCE approach enlarges the understanding of the social, political and fantasmatic logics of SEA studies and; (v) this thesis combines an analysis of the literature and the case of Petrobras to characterise and critique the state of the Brazilian academy and its impacts and reflections on the significance of SEA. This thesis, therefore, argues for more critical studies in the Brazilian academy due to the persistence of idea of SEA and development that takes-for-granted deep exclusions and contradictions and provide little space for critiques.

Plasma Spectroscopic Techniques Applied to Biological and Environmental Matrices

The purpose of this research was to apply the use of direct ablation plasma spectroscopic techniques, including spark-induced breakdown spectroscopy (SIBS) and laser-induced breakdown spectroscopy (LIBS), to a variety of environmental matrices. These were applied to two different analytical problems. SIBS instrumentation was adapted in order to develop a fieldable monitor for the measurement of carbon in soil. SIBS spectra in the 200 nm to 400 nm region of several soils were collected, and the neutral carbon line (247.85 nm) was compared to total carbon concentration determined by standard dry combustion analysis. Additionally, Fe and Si were evaluated in a multivariate model in order to determine their impacts on the model's predictive power for total carbon concentrations. The results indicate that SIBS is a viable method to quantify total carbon levels in soils; obtaining a good correlation between measured and predicated carbon in soils. These results indicate that multivariate analysis can be used to construct a calibration model for SIBS soil spectra, and SIBS is a promising method for the determination of total soil carbon. SIBS was also applied to the study of biological warfare agent simulants. Elemental compositions (determined independently) of bioaerosol samples were compared to the SIBS atomic (Ca, Al, Fe and Si) and molecular (CN, N2 and OH) emission signals. Results indicate a linear relationship between the temporally integrated emission strength and the concentration of the associated element. Finally, LIBS signals of hematite were analyzed under low pressures of pure CO2 and compared with signals acquired with a mixture of CO2, N2 and Ar, which is representative of the Martian atmosphere. This research was in response to the potential use of LIBS instrumentation on the Martian surface and to the challenges associated with these measurements. Changes in Ca, Fe and Al lineshapes observed in the LIBS spectra at different gas compositions and pressures were studied. It was observed that the size of the plasma formed on the hematite changed in a non-linear way as a function of decreasing pressure in a CO2 atmosphere and a simulated Martian atmosphere.

Coastal Erosion--Causes, Erosion Control Methods, Economic and Environmental Impacts, and Best Management Practices

Coastal erosion is an important and constant issue facing coastal areas all over the world today. The rate of coastal development over the years has increased, in turn requiring that action be taken to protect structures from the threat of erosion. A review of the causes of coastal erosion and the methods implemented to control it was conducted in order to determine the best course of action in response to coastal erosion issues. The potential positive and negative economic and environmental impacts are key concerns in determining whether or not to restore an eroding beach and which erosion control method(s) to implement. Results focus on providing a comparison of these concerns as well as recommendations for addressing coastal erosion issues.

A Case Study of the Economic and Environmental Impacts from a Bio-fuel Facility (Southwest Georgia Ethanol, LLC) on the Surrounding Communities, Southwest Georgia

Bio-fuels such as ethanol provide an extraordinary opportunity to address our dependency on foreign oil. This case study examines the economic and environmental impacts associated with constructing and operating a dry mill ethanol manufacturing facility in a Southwest Georgia town and surrounding communities. The case study found that the plant had little impact on air quality, water quality, and habitat fragmentation. However, economic results showed the plant produced $1.5 million in tax revenues, and 86 jobs. Ethanol producers and communities must consider both the economic and environmental impacts on a local community when searching or attracting a bio-fuels plant. Likewise, communities should be aware of these challenges when attracting ethanol production plants.

Utilization of ADR Concepts to Bridge the Gap Between the Extractive Industry and Environmental Interests: An Anticipatory Cooperative Effort (ACE)

The extractive industry, more than any other sector of the economy, often finds itself mired in conflicts with various environmental and community interests. As traditional legal avenues of resolution gave way to the collaborative ideas of alternative dispute resolution, the outcomes, especially the relational outcomes, were less than desirable. This capstone project proposes that an Anticipatory Cooperative Effort (ACE) can help to bridge the gap between industry and environmental interests by encouraging a pro-active and pre-emptive engagement. The point of the ACE concept is not that it defines a new set of principles so much as it repositions where established ADR principles are entertained.

Response of Catch-Per-Unit-Effort to Spatial and Environmental Factors: an Exploratory Data Analysis Using Generalized Additive Models

Understanding spatial distributions and how environmental conditions influence catch-per-unit-effort (CPUE) is important for increased fishing efficiency and sustainable fisheries management. This study investigated the relationship between CPUE, spatial factors, temperature, and depth using generalized additive models. Combinations of factors, and not one single factor, were frequently included in the best model. Parameters which best described CPUE varied by geographic region. The amount of variance, or deviance, explained by the best models ranged from a low of 29% (halibut, Charlotte region) to a high of 94% (sablefish, Charlotte region). Depth, latitude, and longitude influenced most species in several regions. On the broad geographic scale, depth was associated with CPUE for every species, except dogfish. Latitude and longitude influenced most species, except halibut (Areas 4 A/D), sablefish, and cod. Temperature was important for describing distributions of halibut in Alaska, arrowtooth flounder in British Columbia, dogfish, Alaska skate, and Aleutian skate. The species-habitat relationships revealed in this study can be used to create improved fishing and management strategies.

Industry Professionals Who Attain Leadership in Energy and Environmental Design (LEED) Accreditation: An Examination of Motivations in Human Resource (HR) Training and Development

Despite the economy, the green building industry continues to grow and drive the demand for environmentally conscious, highly skilled professionals (USGBC 2009). LEED Accredited Professionals (APs) have the knowledge and skills to meet such demand; however, information is limited regarding LEED APs or their motivations and expectations toward prospective employers. The author surveyed a sample of LEED Accredited architects and found a combination of job and personal factors motivated them to attain accreditation. LEED APs value both a competitive salary and commitment to sustainability in prospective employers. To attract, retain, and utilize LEED APs, executives in this industry must reexamine corporate culture, their willingness to pay for credentialing, and the alignment of their reputation with the desires of potential applicants.

NaOH and KOH for preparing activated carbons used in energy and environmental applications

Alkaline hydroxides, especially sodium and potassium hydroxides, are multi-million-ton per annum commodities and strong chemical bases that have large scale applications. Some of them are related with their consequent ability to degrade most materials, depending on the temperature used. As an example, these chemicals are involved in the manufacture of pulp and paper, textiles, biodiesels, soaps and detergents, acid gases removal (e.g., SO2) and others, as well as in many organic synthesis processes. Sodium and potassium hydroxides are strong and corrosive bases, but they are also very stable chemicals that can melt without decomposition, NaOH at 318ºC, and KOH at 360ºC. Hence, they can react with most materials, even with relatively inert ones such as carbon materials. Thus, at temperatures higher than 360ºC these melted hydroxides easily react with most types of carbon-containing raw materials (coals, lignocellulosic materials, pitches, etc.), as well as with most pure carbon materials (carbon fibers, carbon nanofibers and carbon nanotubes). This reaction occurs via a solid-liquid redox reaction in which both hydroxides (NaOH or KOH) are converted to the following main products: hydrogen, alkaline metals and alkaline carbonates, as a result of the carbon precursor oxidation. By controlling this reaction, and after a suitable washing process, good quality activated carbons (ACs), a classical type of porous materials, can be prepared. Such carbon activation by hydroxides, known since long time ago, continues to be under research due to the unique properties of the resulting activated carbons. They have promising high porosity developments and interesting pore size distributions. These two properties are important for new applications such as gas storage (e.g., natural gas or hydrogen), capture, storage and transport of carbon dioxide, electricity storage demands (EDLC-supercapacitors-) or pollution control. Because these applications require new and superior quality activated carbons, there is no doubt that among the different existing activating processes, the one based on the chemical reaction between the carbon precursor and the alkaline hydroxide (NaOH or KOH) gives the best activation results. The present article covers different aspects of the activation by hydroxides, including the characteristics of the resulting activated carbons and their performance in some environment-related applications. The following topics are discussed: i) variables of the preparation method, such as the nature of the hydroxide, the type of carbon precursor, the hydroxide/carbon precursor ratio, the mixing procedure of carbon precursor and hydroxide (impregnation of the precursor with a hydroxide solution or mixing both, hydroxide and carbon precursor, as solids), or the temperature and time of the reaction are discussed, analyzing their effect on the resulting porosity; ii) analysis of the main reactions occurring during the activation process, iii) comparative analysis of the porosity development obtained from different activation processes (e.g., CO2, steam, phosphoric acid and hydroxides activation); and iv) performance of the prepared activated carbon materials on a few applications, such as VOC removal, electricity and gas storages.

Evaluating Taphonomic Bias in a Storm-Disturbed Carbonate Platform: Effects of Compositional and Environmental Factors in Lower Jurassic Brachiopod Accumulations (Eastern Subbetic Basin, Spain)

In order to evaluate taxonomic and environmental control on the preservation pattern of brachiopod accumulations, sedimentologic and taphonomic data have been integrated with those inferred from the structure of brachiopod accumulations from the easternmost Lower Jurassic Subbetic deposits in Spain. Two brachiopod communities (Praesphaeroidothyris and Securina communities) were distinguished showing a mainly free-lying way of life in soft-bottom habitats. Three taphofacies are discriminated based on proportion of disarticulation, fragmentation, packing, and shell filling. Taphofacies 1 is represented by thinly fragmented, dispersed brachiopod shells in wackestone beds. Taphofacies 2 is spatially restricted to small lenses where shells are poorly fragmented, rarely disarticulated, usually void filled, and highly packed. Taphofacies 3 is represented by mud or cement filled, loosely packed, articulated brachiopods forming large pocket-like structures. Temporal and spatial averaging were minimally involved in taphofacies 2 and 3. It is interpreted that patchy preservation implies preservation of primary original patchiness of brachiopod communities on the seafloor. The origin of shell-rich taphofacies (2 and 3) is related to rapid burial due to episodic storm activity, while shell-poor taphofacies 1 records background conditions. The nature and comparative diversity of these taphofacies underscores the importance of rapid burial for shell beds preservation. Differences in preservation between taphofacies 2 and 3 are mainly related to environmental criteria, most importantly storm energy and water depth. In contrast, the taxonomic-specific pattern of the communities is a subordinate element of control, controlling only minor within-taphofacies differences in preservation.