Release and diffusion of hydroxyl ion from calcium hydroxide-based medicaments

The release and diffusion of hydroxyl ions (OH-) of calcium hydroxide (Ca(OH)2)-based intracanal medications may be affected by the association with other substances. The aim of this study was to evaluate the diffusion of OH- ions through root dentin by the medications: G1, Ca(OH)2/saline; G2, Calen; G3, Calen/camphorated p-monochlorophenol (CMCP); and G4, Calen/0.4% chlorhexidine (CHX). Root canals from bovine teeth were prepared in a standardized manner. A cavity until dentin was prepared in the middle third of the root surface of each specimen. The external surface of the root was made impermeable using a layer of adhesive, except the prepared cavity. The root canals were filled with different medications, and teeth were individually stored in flasks containing 10 ml distilled water at 37 degrees C. The water pH was measured at 1, 3, 7, 14, 21, 30, and 60 days. Data obtained were subjected to anova and Tukeys tests. Increase in pH was observed at 3 days for Calen/CHX and from 7 to 14 days for the other mixtures. Calen paste promoted pH increase up to 21 days. Calen/CMCP had the highest pH up to 21 days, and all groups had similar results at 30 days. At 60 days, the greatest pH values were observed for Calen/CMCP and Calen alone. All different formulations of Ca(OH)2-based medications tested release hydroxyl ion that can diffuse through the dentin.

Maximum inhibitory dilution of mouthwashes containing chlorhexidine and polyhexamethylene biguanide against salivary Staphylococcus aureus

Objective: The aim of the present study was to determine the in vitro maximum inhibitory dilution (MID) of two chlorhexidine-based oral mouthwashes (CHX): Noplak (R), Periogard (R), and one polyhexamethylene biguanide-based mouthwash (PHMB): Sanifill Premium (R) against 28 field Staphylococcus aureus strains using the agar dilution method. Materials and Methods: For each product, decimal dilutions ranging from 1/10 to 1/655,360 were prepared in distilled water and added to Mueller Hinton Agar culture medium. After homogenization, the culture medium was poured onto Petri dishes. Strains were inoculated using a Steers multipoint inoculator and dishes were incubated at 37 degrees C for 24hours. For reading, MID was considered as the maximum dilution of the mouthwash still capable of inhibiting microbial growth. Results: Sanifill Premium (R) inhibited the growth of all strains at 1/40 dilution and of 1 strain at 1/80 dilution. Noplak (R) inhibited the growth of 23 strains at 1/640 dilution and of all 28 strains at 1/320 dilution. Periogard (R) showed inhibited growth of 7 strains at 1/640 dilution and of all 28 strains at 1/320 dilution. Data were submitted to Kruskal-Wallis statistical test, showing significant differences between the mouthwashes evaluated (p<0.05). No significant difference was found between Noplak (R) and Periogard (R) (p>0.05). Sanifill Premium (R) was the least effective (p<0.05). Conclusion: It was concluded that CHX-based mouthwashes present better antimicrobial activity against S. Aureus than the PHMB-based mouthwash.

Curing depth of composite resin light cured by LED and halogen light-curing units

The purpose of this study was to evaluate the polymerization effectiveness of a composite resin (Z-250) utilizing microhardness testing. In total, 80 samples with thicknesses of 2 and 4 mm were made, which were photoactivated by a conventional halogen light-curing unit, and light-curing units based on LED. The samples were stored in water distilled for 24 h at 37C. The Vickers microhardness was performed by the MMT-3 microhardness tester. The microhardness means obtained were as follows: G1, 72.88; G2, 69.35; G3, 67.66; G4, 69.71; G5, 70.95; G6, 75.19; G7, 72.96; and G8, 71.62. The data were submitted to an analysis of variance (ANOVA's test), adopting a significance level of 5%. The results showed that, in general, there were no statistical differences between the halogen and LED light-curing units used with the same parameters.

pH and calcium ion release evaluation of pure and calcium hydroxide-containing Epiphany for use in retrograde filling

Objective: Hydroxyl (OH(-)) and calcium (Ca(++)) ion release was evaluated in six materials: G1) Sealer 26, G2) White mineral trioxide aggregate (MTA), G3) Epiphany, G4) Epiphany + 10% calcium hydroxide (CH), G5) Epiphany + 20% CH, and G6) zinc oxide and eugenol. Material and Methods: Specimens were placed in polyethylene tubes and immersed in distilled water. After 3, 6, 12, 24, and 48 h, 7, 14, and 28 days, the water was assessed for pH with a pH meter and for Ca++ release by atomic absorption spectrophotometry. Results: G1, G2, G4, and G5 had the highest pH until 14 days (p < 0.05). G1 presented the highest Ca(++) release until 6 h, and G4 and G5, from 12 h through 14 days. Ca(++) release was greater for G1 and G2 at 28 days. G6 released the least Ca(++). Conclusions: MTA, Sealer 26, Epiphany, and Epiphany + CH release OH-and Ca(++) ions. Epiphany + CH may be an alternative as retrofilling material.

pH, Calcium Ion Release, and Setting Time of an Experimental Mineral Trioxide Aggregate-based Root Canal Sealer

Introduction: An experimental mineral trioxide aggregate sealer (MTAS) has been developed for use as a root canal sealer. The aim of this study was to evaluate the setting time, pH, and calcium ion release of MTAS compared with white Portland cement (CPB-40; Votorantin Cimentos, Camargo Correa SA, Pedro Leopoldo, MG, Brazil), white MTA Angelus (MTA; Angelus, Londrina, PR, Brazil), and AH Plus (Dentsply DeTrey, Konstanz, Germany). Methods: For the evaluation of setting time, each material was analyzed using Gilmore-type needles. Polyethylene tubes with the materials were immersed in distilled water for the measurement of pH (digital pH meter) and calcium release (atomic absorption spectrophotometry). The evaluations were performed at 3, 6, 12, 24, and 48 hours and 7, 14, and 28 days. Data were analyzed by analysis of variance and the Tukey test at 5% significance level. Results: MTAS showed higher calcium release at all experimental periods, a greater increase in pH up to 48 hours and the longest setting time. Conclusions: MTAS presented favorable properties for its indication as a root canal sealer. (J Endod 2011;37:844-846)

Evaluation of the propylene glycol association on some physical and chemical properties of mineral trioxide aggregate

Duarte MAH, Alves de Aguiar K, Zeferino MA, Vivan RR, Ordinola-Zapata R, Tanomaru-Filho M, Weckwerth PH, Kuga MC. Evaluation of the propylene glycol association on some physical and chemical properties of mineral trioxide aggregate. International Endodontic Journal, 45, 565570, 2012. Abstract Aim To evaluate the influence of propylene glycol (PG) on the flowability, setting time, pH and calcium ion release of mineral trioxide aggregate (MTA). Methodology Mineral trioxide aggregate was mixed with different proportions of PG, as follows: group 1: MTA + 100% distilled water (DW); group 2: MTA + 80% DW and 20% PG; group 3: MTA + 50% DW and 50% PG; group 4: MTA + 20% DW and 80% PG; group 5: MTA + 100% PG. The ANSI/ADA No. 57 was followed for evaluating the flowability and the setting time was measured by using ASTM C266-08. For pH and calcium release analyses, 50 acrylic teeth with root-end cavities were filled with the materials (n = 10) and individually immersed in flasks containing 10 mL deionized water. After 3 h, 24 h, 72 h and 168 h, teeth were placed in new flasks and the water in which each specimen was immersed had its pH determined by a pH metre and the calcium release measured by an atomic absorption spectrophotometer with a calcium-specific hollow cathode lamp. Data were analysed by using one-way anova test for global comparison and by using Tukeys test for individual comparisons. Results The highest value of flowability was observed with MTA + 20% DW and 80% PG and the lowest values were found with MTA + 100% DW. They were significantly different compared to the other groups (P < 0.05). The presence of PG did not affect the pH and calcium release. The MTA + 100% PG favoured the highest (P < 0.05) pH and calcium release after 3 h. Increasing the PG proportion interfered (P < 0.05) with the setting time; when used at the volume of 100% setting did not occur. Conclusion The addition of PG to MTA-Angelus increased its setting time, improved flowability and increased the pH and calcium ion release during the initial post-mixing periods. The ratio of 80% DW 20% PG is recommended.

Factors affecting on bond strength of glass fiber post cemented with different resin cements to root canal

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of Ultrasonic Activation on pH and Calcium Released by Calcium Hydroxide Pastes in Simulated External Root Resorption

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of pH and Calcium Ion Release of Root-end Filling Materials Containing Calcium Hydroxide or Mineral Trioxide Aggregate

Introduction: To evaluate calcium ion release and pH of Sealer 26 (S26) (Dentsply, Rio de Janeiro, RJ, Brazil), white mineral trioxide aggregate (MTA), Endo CPM Sealer (CPM1) (EGEO SRL Bajo licencia MTM Argentina SA, Buenos Aires, Argentina), Endo CPM Sealer in a thicker consistency (CPM 2), and zinc oxide and eugenol cement (ZOE). Methods: Material samples (n = 10) were placed in polyethylene tubes and immersed in 10 mL of distilled water. After 3, 6,12,24, and 48 hours and 7,14, and 28 days, the water pH was determined with a pH meter, and calcium release was assessed by atomic absorption spectrophotometry. An empty tube was used as the control group. Results: The control group presented a pH value of 6.9 at all studied periods and did not show the presence of calcium ion. S26 presented greater hydroxyl ion release up to 12 hours (p < 0.05). From 24 hours until 28 days, S26, MTA, CPM1, and CPM2 had similar results. in ail periods, ZOE presented the lowest hydroxyl ion release. CPM1, followed by CPM2, released the most calcium ions until 24 hours (p < 0.05). Between 48 hours and 7 days, CPM1 and CPM2 had the highest release. A greater calcium ion release was observed for CPM2, followed by CPM1 at 14 days and for S26, CPM1, and CPM2 at 28 days. ZOE released the least calcium ions in all periods. Conclusion: Sealer 26, MTA, and Endo CPM sealer at normal or thicker consistency release hydroxyl and calcium ions. Endo CPM sealer may be an alternative as root-end filling material. (J Endod 2009;35:1418-1421)

Atividade antifúngica de óleos essenciais frente a amostras clínicas de Candida albicans isoladas de pacientes HIV positivos

Objetivou-se avaliar a atividade antifúngica dos óleos essenciais de Ocimum basilicum L. (manjericão), Cymbopogon martinii L. (palmarosa), Thymus vulgaris L. (tomilho) e Cinnamomum cassia Blume (canela da china) sobre cepas de Candida albicans isoladas de pacientes HIV positivos e cepa padrão (ATCC 76845). Quinze amostras clínicas de C. albicans (C1-C15) foram repicadas em ágar Sabouraud Dextrose, para confecção de suspensões em solução salina estéril (0,9%) contendo 1,5 x 10(6) UFC mL-1. As emulsões dos óleos essenciais foram preparadas em água destilada estéril e tween 80, com concentrações variando entre 1024 µg mL-1 e 4 µg mL-1. A ação antifúngica foi determinada por meio da Concentração Inibitória Mínima (CIM) utilizando-se a técnica da microdiluição. Foram utilizados como controles positivos a nistatina e o miconazol (50 µg mL-1). Os testes foram realizados em triplicata, sendo a CIM, a menor concentração capaz de inibir o crescimento das leveduras, observada por método visual de acordo com a turvação do meio de cultura. Para C. albicans (ATCC 76845), a CIM do óleo essencial de C. cassia foi 64 µg mL-1, enquanto para óleo de C. martinii foi 1024 µg mL-1. Para as cepas clínicas, verificou-se que a CIM de C. cassia para 80% das cepas foi 64 µg mL-1, sendo a variação dos valores da CIM entre 128 µg mL-1 e 64 µg mL-1. Observou-se que para 66,6% das amostras clínicas, a CIM de C. martinii foi 612 µg mL-1. Constatou-se que a nistatina não apresentou atividade frente às cepas clínicas (C1-C15), enquanto a atividade antifúngica do miconazol foi verificada em 100% das amostras. Não se constatou atividade antimicrobiana dos óleos essenciais de O. basilicum e T. vulgaris, nas concentrações avaliadas. Concluiu-se que os óleos essenciais de C. cassia e C. martinii, em diferentes concentrações, apresentam atividade antifúngica sobre cepas de C. albicans isoladas de pacientes HIV positivos e cepa padrão (ATCC 76845). Entretanto não foi observada inibição antimicrobiana para os óleos de O. basilicum e T. vulgaris.

Curva de absorção de água em sementes de atemóia (Annona cherimola Mill. x Annona squamosa L.) cv. Gefner

O presente trabalho teve o objetivo de caracterizar a curva de absorção de água em sementes de atemóia (Annona cherimola Mill x Annona squamosa L.) cv. Gefner, submetidas a três métodos de embebição: sementes submersas em água destilada (MSSA), sementes entre papel de filtro embebido em água destilada acondicionada em caixa tipo gerbox (MPEA) e teste-padrão (MTP), com sementes mantidas em rolo de papel de filtro umedecido em água destilada. O delineamento experimental foi o inteiramente casualizado, com 6 tratamentos e 4 repetições de 25 sementes por parcela, constituídos por três métodos de embebição, empregando-se sementes vivas e mortas. O tempo de embebição entre 27; 34 e 47 horas, nos métodos MTP, MPEA e MSSA, representam indicativo para tratamento de sementes, podendo funcionar como tempo mínimo necessário para embebição em solução com reguladores vegetais. Conclui-se que os métodos que caracterizaram as três fases de absorção de água em sementes de atemóia foram o MTP e MPEA com mudança entre as fases I e II após 27 e 34 horas, respectivamente, atingindo a fase III com 234 horas, o que permite determinar o tempo de imersão para tratamentos pré-germinativos.

Effects of the hydromethanolic extract of Austroplenckia populnea (Celastraceae) on reproductive parameters of male rats

Austroplenckia populnea (Reiss.) Lundell. was selected for this study because it has been shown that some plants from the Celastraceae family have antifertility effects. Twelve adult male rats were treated with hydromethanolic extract made from the leaves, 500 mg/kg/day, orally, for 70 days. Distilled water was administered to the control animals (n = 10). At the end of the experiment, and before killing the rats, their sexual behavior was evaluated. The number of intromissions, latencies to first mount and ejaculation, and first intromission after ejaculation were significantly reduced in the treated group, but the total number of ejaculations did not differ from the control group. The weight and histology of the reproductive organs, sperm production, spermatogenesis, prostate fructose content, cauda epidydimides duct diameter, and sperm morphology were not affected. Sperm concentration in cauda epidydimides was significantly decreased. The results showed that A. populnea has effects on male rat reproduction, affecting the sexual behavior and epididymal sperm concentration. (C) 2002 Elsevier B.V. All rights reserved.

The toxic effects of Coleus barbatus B. on the different periods of pregnancy in rats

Extracts of Coleus bal barbatus B. have been used in folk medicine to interrupt pregnancy. In order to evaluate if this plant interferes with embryo implantation or with the normal development of the concepts, pregnant Wistar rats were treated with increasing doses (220, 440 and 880 mg/kg per day) of a hydroalcoholic extract of C. barbatus. The rats received the extract by gavage from days 0 to 5 of pregnancy (preimplantation period) or 6 to 15 (organogenic period). Control groups received distilled water during the same periods: the animals were killed at term for the evaluation of maternal and fetal parameters. The results showed that the treatment with 880 mg/kg per day of the extract of C. barbatus before embryo implantation caused delayed fetal development and an anti-implantation effect, which justifies the popular use of this extract with abortive purposes. After embryo implantation delayed development associated with maternal toxicity was observed in the fetuses of the group which received 880 mg/kg per day. (C) 2000 Elsevier B.V. Ireland Ltd. All rights reserved.

Ventilatory responses to skin extract in catfish

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Hunger suppresses the onset and the freezing component of the antipredator response to conspecific skin extract in pintado catfish

Although the skin of an injured conspecific releases alarm substance in some fish species, it has been shown that such damage induces feeding behaviour rather than an alarm reaction under conditions of food scarcity. We studied chemical communication associated with this paradox in a Brazilian catfish, the pintado (Pseudoplatystoma coruscans). In preliminary tests pintado were confirmed to demonstrate an alarm reaction to conspecific skin extract. In the experiment we investigated whether skin extract of pintado induces either alarm response (panic or alert component) or feeding in hungry conspecifics. Fish feed-deprived for eight days and fed control fish were exposed to either conspecific skin extract or distilled water (as a control). Alarm reaction was restricted to the skin extract treatment and occurred in the fish irrespective of their hunger state, but the components of this response were significantly affected by hungry. Fed fish showed a complete alarm reaction (dashing and freezing behaviours). Feed-deprived fish exhibited only part of this biphasic response, the dashing component. We conclude that chemicals from injured fish elicit an alarm reaction, which is partially inhibited by feeding motivation.