Exploring socioeconomic impacts of forest based mitigation projects: Lessons from Brazil and Bolivia

This paper aims to contribute new insights globally and regionally on how carbon forest mitigation contributes to sustainable development in South America. Carbon finance has emerged as a potential policy option to tackling global climate change, degradation of forests, and social development in poor countries. This paper focuses on evaluating the socioeconomic impacts of a set of forest based mitigation pilot projects that emerged under the United Nations Framework Convention on Climate Change. The paper reviews research conducted in 2001–2002, drawing from empirical data from four pilot projects, derived from qualitative stakeholder interviews, and complemented by policy documents and literature. Of the four projects studied three are located in frontier areas, where there are considerable pressures for conversion of standing forest to agriculture. In this sense, forest mitigation projects have a substantial role to play in the region. Findings suggest however, that all four projects have experienced cumbersome implementation processes specifically, due to weak social objectives, poor communication, as well as time constraints. In three out of four cases, stakeholders highlighted limited local acceptance at the implementation stages. In the light of these findings, we discuss opportunities for implementation of future forest based mitigation projects in the land use sector.

Small-scale forest carbon projects: Adapting CDM to low-income communities

Given the decision to include small-scale sinks projects implemented by low-income communities in the clean development mechanism of the Kyoto Protocol, the paper explores some of the basic governance conditions that such carbon forestry projects will have to meet if they are to be successfully put in practice. To date there are no validated small-scale sinks projects and investors have shown little interest in financing such projects, possibly to due to the risks and uncertainties associated with sinks projects. Some suggest however, that carbon has the potential to become a serious commodity on the world market, thus governance over ownership, rights and responsibilities merit discussion. Drawing on the interdisciplinary development, as well as from the literature on livelihoods and democratic decentralization in forestry, the paper explores how to adapt forest carbon projects to the realities encountered in the local context. It also highlights the importance of capitalizing on synergies with other rural development strategies, ensuring stakeholder participation by working with accountable, representative local organizations, and creating flexible and adaptive project designs.

The development of the Virtual Construction Simulator 3: an interactive simulation environment for construction management education

This paper discusses the development of the Virtual Construction Simulator (VCS) 3 - a simulation game-based educational tool for teaching construction schedule planning and management. The VCS3 simulation game engages students in learning the concepts of planning and managing construction schedules through goal driven exploration, employed strategies, and immediate feedback. Through the planning and simulation mode, students learn the difference between the as-planned and as-built schedules resulting from varying factors such as resource availability, weather and labor productivity. This paper focuses on the development of the VCS3 and its construction physics model. Challenges inherent in the process of identifying variables and their relationships to reliably represent and simulate the dynamic nature of planning and managing of construction projects are also addressed.

Development and exploitation of a controlled vocabulary in support of climate modelling

There are three key components for developing a metadata system: a container structure laying out the key semantic issues of interest and their relationships; an extensible controlled vocabulary providing possible content; and tools to create and manipulate that content. While metadata systems must allow users to enter their own information, the use of a controlled vocabulary both imposes consistency of definition and ensures comparability of the objects described. Here we describe the controlled vocabulary (CV) and metadata creation tool built by the METAFOR project for use in the context of describing the climate models, simulations and experiments of the fifth Coupled Model Intercomparison Project (CMIP5). The CV and resulting tool chain introduced here is designed for extensibility and reuse and should find applicability in many more projects.

An investigation of the role of business analysts in IS development

Business analysis has developed since the early 1990s as an IS discipline that is concerned with understanding business problems, defining requirements and evaluating relevant solutions. However, this discipline has had limited recognition within the academic community and little research has been conducted into the practices and standards employed by business analysts. This paper reports on a study into business analysis that considered the activities conducted and the outcomes experienced on IS projects. Senior business analysts were interviewed in order to gain insights into the business analyst role and the techniques and approaches applied when conducting this work. The Context, Content, Process, Outcomes framework was adopted as a basis for developing the interview questions. The data collected was analysed using the template analysis technique and the template was based upon this framework. Additional themes concerning aspects of business analysis that may contribute to IS success emerged during data analysis. These included the key business analysis activities and the skills business analysts require to perform these activities. The organisational attitude was also identified as a key factor in enabling the use and contribution of business analysis.

The co-development of technology and new buildings: incorporating building integrated photovoltaics

Current approaches for the reduction of carbon emissions in buildings are often predicated on the integration of renewable technologies into building projects. Building integrated photovoltaics (BIPV) is one of these technologies and brings its own set of challenges and problems with a resulting mutual articulation of this technology and the building. A Social Construction of Technology (SCOT) approach explores how negotiations between informal groups of project actors with shared interests shape the ongoing specification of both BIPV and the building. Six main groups with different interests were found to be involved in the introduction of BIPV (Cost Watchers, Design Aesthetes, Green Guardians, Design Optimizers, Generation Maximizers and Users). Their involvement around three sets of issues (design changes from lack of familiarity with the technology, misunderstandings from unfamiliar interdependencies of trades and the effects of standard firm procedure) is followed. Findings underline how BIPV requires a level of integration that typically spans different work packages and how standard contractual structures inhibit the smooth incorporation of BIPV. Successful implementation is marked by ongoing (re-)design of both the building and the technology as informal fluid groups of project actors with shared interests address the succession of problems which arise in the process of implementation.

Impact of externalities on sustainable development: evidence from public-private partnerships in Kazakhstan and Russia

Purpose – This paper aims to investigate the influence of public-private partnerships (PPPs) on social and economic conditions in Kazakhstan and Russia from a public economics perspective, namely, through the lens of a market failure and PPPs’ negative externalities. Design/methodology/approach – Drawing on the concept of a market failure and using the externalities perspective, the paper investigates whether partnerships are instrumental in solving market problems, which is illustrated by the evidence from ongoing PPP projects in Kazakhstan and Russia. Findings – Results show that citizens face expansion of monopolistic trends in the service provision and decreased availability of public services. Additionally, the government support to partnerships recreates a negative externality in the form of a higher risk premium on loan interest rates that banks use to finance PPPs. The partnerships’ impact on sustainable development often appears detrimental, as they significantly intensify the struggle between sub-national governments for increased transfers from the national budget. Practical implications – The government agencies must incorporate the appraisal of the PPP externalities and their effects on the society in the decision-making regarding the PPP formation. Originality/value – The authors suggest that, although government is interested in PPPs’ positive externalities, in reality many negative externalities may offset the positive spillover effects. As a result, the partnerships’ contributions to economic and social sustainability remain controversial. Extending the value-for-money concept to incorporate the assessment of PPP externalities might significantly enhance the partnership conceptualisation by more comprehensive and accurate assessment of PPPs’ economic and social value.

Conceptual Product Development in Small Corporations

The main objective of the thesis “Conceptual Product Development in Small Corporations” is by the use of a case study test the MFD™-method (Erixon G. , 1998) combined with PMM in a product development project. (Henceforth called MFD™/PMM-method). The MFD™/PMM-method used for documenting and controlling a product development project has since it was introduced been used in several industries and projects. The method has been proved to be a good way of working with the early stages of product development, however, there are almost only projects carried out on large industries which means that there are very few references to how the MFD™/PMM-method works in a small corporation. Therefore, was the case study in the thesis “Conceptual Product Development in Small Corporations” carried out in a small corporation to find out whether the MFD™/PMM-method also can be applied and used in such a corporation.The PMM was proposed in a paper presented at Delft University of Technology in Holland 1998 by the author and Gunnar Erixon. (See appended paper C: The chart of modular function deployment.) The title “The chart of modular function deployment” was later renamed as PMM, Product Management Map. (Sweden PreCAD AB, 2000). The PMM consists of a QFD-matrix linked to MIM (Module Indication Matrix) via a coupling matrix which makes it possible to make an unbroken chain from the customer domain to the designed product/modules. The PMM makes it easy to correct omissions made in creating new products and modules.In the thesis “Conceptual Product Development in Small Corporations” the universal MFD™/PMM-method has been adapted by the author to three models of product development; original-, evolutionary- and incremental development.The evolutionary adapted MFD™/PMM-method was tested as a case study at Atlings AB in the community Ockelbo. Atlings AB is a small corporation with a total number of 50 employees and an annual turnover of 9 million €. The product studied at the corporation was a steady rest for supporting long shafts in turning. The project team consisted of management director, a sales promoter, a production engineer, a design engineer and a workshop technician, the author as team leader and a colleague from Dalarna University as discussion partner. The project team has had six meetings.The project team managed to use MFD™ and to make a complete PMM of the studied product. There were no real problems occurring in the project work, on the contrary the team members worked very well in the group, having ideas how to improve the product. Instead, the challenge for a small company is how to work with the MFD™/PMM-method in the long run! If the MFD™/PMM-method is to be a useful tool for the company it needs to be used continuously and that requires financial and personnel resources. One way for the company to overcome the probable lack of recourses regarding capital and personnel is to establish a good cooperation with a regional university or a development centre.

Development, capabilities and technology : an evaluative framework

In this paper we present a framework to be used for evaluation of Information and Communication Technology for Development (ICT4D) projects. The framework is based on Sen´s notion of development as freedom where human capabilities and functionings are seen as key aspects to development. Sen´s capability approach presents an alternative way of seeing and evaluating development (alternative to more traditional ways of measuring development). The approach is based on expanding freedoms, or eliminating unfreedoms, for people so that they can live a life that they have reason to value. Even though Sen is referenced a lot in ICT4D literature the analysis rarely goes further then stating that Sen presents an alternative to traditional ways of development. Reasons can be that the capability approach does not specifically mention technology, in addition to the lack of guidelines presented by Sen on how to use the framework. The aim of this paper is to operationalize the evaluation process and to include a clear role for technology in Sen´s capability framework. The framework is validated with a case on distance education from Bangladesh. 

Degree projects improving co-operation between the teacher education program and schools : - Swedish experiences

In 1977, when teacher education inSwedenwas incorporated into the university system, the main reason was to transform it into an academic tradition. Now, nearly 30 years later, there is still tension between the academic and the vocational tradition; they show up as different and separated elements in a program that is meant to prepare students for a career as a teacher and for a possible future career as a researcher in this field. This tension gives rise to a risk of allowing parallel “tracks” to develop and of isolating the degree thesis work from other courses. On the teacher-training program in which we are involved, close co-operation with partner-schools, where the practical part of the program takes place, has been established. Here, the students´ degree theses are an important factor in making this co-operation work on a concrete level. Accordingly, the purpose of the degree thesis is both to reflect problems in schools and contribute to better teaching in the individual school, but also to offer relevant educational subject matter to the students, which may be adapted as an element in the university’s research environments. From these points of view, the degree thesis is an important part of teacher education and rather more than just a single course. The degree thesis should be an element that gives the students an opportunity to show that they have reached central goals in the teacher education program. It should also be an integral part in the development of critical and scholarly thinking, deepening pedagogical and didactic knowledge and giving the students an opportunity to apply research methods. We will here use two minor case studies: one that compares teacher education programs in five Swedish universities and one minor study at one of those universities, in order to elaborate on the questions: - What purpose has a degree thesis and what role does it play in teacher education? - What criteria are relevant to assessing a degree thesis and what qualities do the degree theses have? - Is it possible to assess a degree thesis fairly and what happens to students who do not pass? - How could the degree thesis be used to improve the contact between the teacher education program and its partner schools in order to contribute to the development of the individual school?

Achieving quality in management of development ngos: analysis of four ngos in Rio de Janeiro.

Rio de Janeiro is among the cities with the highest amount of NGOs in the world. However, not all of the projects carried out by the NGOs are equally successful. In this research, I would like to analyze a selection of some of the most well-known social development enterprises operating in Rio, in order to better understand how they operate, what difficulties they face, which factors play the crucial role in achieving peak performance. Moreover, I would like to compare the field research findings with the academic theory on management of social development NGOs, and possibly come up with ideas for further improvements.

Impact assessment and quality analysis of corporate social responsability (CSR) programs of mining companies and their contribution to sustainable development in the communities they operate: case study Tenke Fungurume Mining SA in the Democratic Republic of Congo (DRC)

Purpose – This case study presents an impact assessment of Corporate Social Responsibility (CSR) programs of the TFM Company in order to understand how they contribute to the sustainable development of communities in areas in which they operate. Design/Methodology/Approach - Data for this study was collected using qualitative data methods that included semi-structured interviews and Focus Group Discussions most of them audio and video recorded. Documentary analysis and a field visit were also undertaken for the purpose of quality analysis of the CSR programs on the terrain. Data collected was analyzed using the Seven Questions to sustainability (7Qs) framework, an evaluation tool developed by the Mining, Minerals and Sustainable Development (MMSD) North America chapter. Content analysis method was on the other hand used to examine the interviews and FGDs of the study participants. Findings - Results shows that CSR programs of TFM SA do contribute to community development, as there have been notable changes in the communities’ living conditions. But whether they have contributed to sustainable development is not yet the case as programs that enhance the capacity of communities and other stakeholders to support these projects development beyond the implementation stage and the mines operation lifetime need to be considered and implemented. Originality/Value – In DRC, there is paucity of information of research studies that focus on impact assessment of CSR programs in general and specifically those of mining companies and their contribution to sustainable development of local communities. Many of the available studies cover issues of minerals and conflict or conflict minerals as mostly referred to. This study addressees this gap.

JML- Based formal development of a Java card application for managing medical appointments

Although formal methods can dramatically increase the quality of software systems, they have not widely been adopted in software industry. Many software companies have the perception that formal methods are not cost-effective cause they are plenty of mathematical symbols that are difficult for non-experts to assimilate. The Java Modelling Language (short for JML) Section 3.3 is an academic initiative towards the development of a common formal specification language for Java programs, and the implementation of tools to check program correctness. This master thesis work shows how JML based formal methods can be used to formally develop a privacy sensitive Java application. This is a smart card application for managing medical appointments. The application is named HealthCard. We follow the software development strategy introduced by João Pestana, presented in Section 3.4. Our work influenced the development of this strategy by providing hands-on insight on challenges related to development of a privacy sensitive application in Java. Pestana’s strategy is based on a three-step evolution strategy of software specifications, from informal ones, through semiformal ones, to JML formal specifications. We further prove that this strategy can be automated by implementing a tool that generates JML formal specifications from a welldefined subset of informal software specifications. Hence, our work proves that JML-based formal methods techniques are cost-effective, and that they can be made popular in software industry. Although formal methods are not popular in many software development companies, we endeavour to integrate formal methods to general software practices. We hope our work can contribute to a better acceptance of mathematical based formalisms and tools used by software engineers. The structure of this document is as follows. In Section 2, we describe the preliminaries of this thesis work. We make an introduction to the application for managing medical applications we have implemented. We also describe the technologies used in the development of the application. This section further illustrates the Java Card Remote Method Invocation communication model used in the medical application for the client and server applications. Section 3 introduces software correctness, including the design by contract and the concept of contract in JML. Section 4 presents the design structure of the application. Section 5 shows the implementation of the HealthCard. Section 6 describes how the HealthCard is verified and validated using JML formal methods tools. Section 7 includes some metrics of the HealthCard implementation and specification. Section 8 presents a short example of how a client-side of a smart card application can be implemented while respecting formal specifications. Section 9 describes a prototype tools to generate JML formal specifications from informal specifications automatically. Section 10 describes some challenges and main ideas came acrorss during the development of the HealthCard. The full formal specification and implementation of the HealthCard smart card application presented in this document can be reached at https://sourceforge.net/projects/healthcard/.

The Brazilian Research Consortium on Obsessive-Compulsive Spectrum Disorders: recruitment, assessment instruments, methods for the development of multicenter collaborative studies and preliminary results

OBJETIVO: Descrever o recrutamento de pacientes, instrumentos de avaliação, métodos para o desenvolvimento de estudos colaborativos multicêntricos e os resultados preliminares do Consórcio Brasileiro de Pesquisa em Transtornos do Espectro Obsessivo-Compulsivo, que inclui sete centros universitários. MÉTODO: Este estudo transversal incluiu entrevistas semi-estruturadas (dados sociodemográficos, histórico médico e psiquiátrico, curso da doença e diagnósticos psiquiátricos comórbidos) e instrumentos que avaliam os sintomas do transtorno obsessivo-compulsivo (Escala para Sintomas Obsessivo-Compulsivos de Yale-Brown e Escala Dimensional para Sintomas Obsessivo-Compulsivos de Yale-Brown), sintomas depressivos (Inventário de Depressão de Beck), sintomas ansiosos (Inventário de Ansiedade de Beck), fenômenos sensoriais (Escala de Fenômenos Sensoriais da Universidade de São Paulo), juízo crítico (Escala de Avaliação de Crenças de Brown), tiques (Escala de Gravidade Global de Tiques de Yale) e qualidade de vida (questionário genérico de avaliação de qualidade de vida, Medical Outcome Quality of Life Scale Short-form-36 e Escala de Avaliação Social). O treinamento dos avaliadores consistiu em assistir cinco entrevistas filmadas e entrevistar cinco pacientes junto com um pesquisador mais experiente, antes de entrevistar pacientes sozinhos. A confiabilidade entre todos os líderes de grupo para os instrumentos mais importantes (Structured Clinical Interview for DSM-IV, Dimensional Yale-Brown Obsessive-Compulsive Scale, Universidade de São Paulo Sensory Phenomena Scale ) foi medida após seis entrevistas completas. RESULTADOS: A confiabilidade entre avaliadores foi de 96%. Até março de 2008, 630 pacientes com transtorno obsessivo-compulsivo tinham sido sistematicamente avaliados. A média de idade (±SE) foi de 34,7 (±0,51), 56,3% eram do sexo feminino e 84,6% caucasianos. Os sintomas obsessivo-compulsivos mais prevalentes foram os de simetria e os de contaminação. As comorbidades psiquiátricas mais comuns foram depressão maior, ansiedade generalizada e transtorno de ansiedade social. O transtorno de controle de impulsos mais comum foi escoriação neurótica. CONCLUSÃO: Este consórcio de pesquisa, pioneiro no Brasil, permitiu delinear o perfil sociodemográfico, clínico e terapêutico do paciente com transtorno obsessivo-compulsivo em uma grande amostra clínica de pacientes. O Consórcio Brasileiro de Pesquisa em Transtornos do Espectro Obsessivo-Compulsivo estabeleceu uma importante rede de colaboração de investigação clínica padronizada sobre o transtorno obsessivo-compulsivo e pode abrir o caminho para projetos semelhantes destinados a integrar outros grupos de pesquisa no Brasil e em todo o mundo.