Two-magnon bound state causes ultrafast thermally induced magnetisation switching

There has been much interest recently in the discovery of thermally induced magnetisation switching using femtosecond laser excitation, where a ferrimagnetic system can be switched deterministically without an applied magnetic field. Experimental results suggest that the reversal occurs due to intrinsic material properties, but so far the microscopic mechanism responsible for reversal has not been identified. Using computational and analytic methods we show that the switching is caused by the excitation of two-magnon bound states, the properties of which are dependent on material factors. This discovery allows us to accurately predict the onset of switching and the identification of this mechanism will allow new classes of materials to be identified or designed for memory devices in the THz regime.

New Strain Gradient Theory And Analysis

A new strain gradient theory which is based on energy nonlocal model is proposed in this paper, and the theory is applied to investigate the size effects in thin metallic wire torsion, ultra-thin beam bending and micro-indentation of polycrystalline copper. First, an energy nonlocal model is suggested. Second, based on the model, a new strain gradient theory is derived. Third, the new theory is applied to analyze three representative experiments.

Two new integral transforms and their applications

This thesis is in two parts. In Part I the independent variable θ in the trigonometric form of Legendre's equation is extended to the range ( -∞, ∞). The associated spectral representation is an infinite integral transform whose kernel is the analytic continuation of the associated Legendre function of the second kind into the complex θ-plane. This new transform is applied to the problems of waves on a spherical shell, heat flow on a spherical shell, and the gravitational potential of a sphere. In each case the resulting alternative representation of the solution is more suited to direct physical interpretation than the standard forms.

In Part II separation of variables is applied to the initial-value problem of the propagation of acoustic waves in an underwater sound channel. The Epstein symmetric profile is taken to describe the variation of sound with depth. The spectral representation associated with the separated depth equation is found to contain an integral and a series. A point source is assumed to be located in the channel. The nature of the disturbance at a point in the vicinity of the channel far removed from the source is investigated.

The South Atlantic Alliance: A southeastern U.S. state Governors initiative to address opportunities and challenges embodied in the region's coastal and ocean domain

The pressures placed on the natural, environmental, economic, and cultural sectors from continued growth, population shifts, weather and climate, and environmental quality are increasing exponentially in the southeastern U.S. region. Our growing understanding of the relationship of humans with the marine environment is leading us to explore new ecosystem-based approaches to coastal management, marine resources planning, and coastal adaptation that engages multiple state jurisdictions. The urgency of the situation calls for coordinated regional actions by the states, in conjunction with supporting partners and leveraging a diversity of resources, to address critical issues in sustaining our coastal and ocean ecosystems and enhancing the quality of life of our citizens. The South Atlantic Alliance (www.southatlanticalliance.org) was formally established on October 19, 2009 to “implement science-based policies and solutions that enhance and protect the value of coastal and ocean resources of the southeastern United States which support the region's culture and economy now and for future generations.” The Alliance, which includes North Carolina, South Carolina, Georgia, and Florida, will provide a regional mechanism for collaborating, coordinating, and sharing information in support of resource sustainability; improved regional alignment; cooperative planning and leveraging of resources; integrated research, observations, and mapping; increased awareness of the challenges facing the South Atlantic region; and inclusiveness and integration at all levels. Although I am preparing and presenting this overview of the South Atlantic Alliance and its current status, there are a host of representatives from agencies within the four states, universities, NGOs, and ongoing southeastern regional ocean and coastal programs that are contributing significant time, expertise, and energy to the success of the Alliance; information presented herein and to be presented in my oral presentation was generated by the collaborative efforts of these professionals. I also wish to acknowledge the wisdom and foresight of the Governors of the four states in establishing this exciting regional ocean partnership. (PDF contains 4 pages)

Strength of tantalum at high pressures through Richtmyer-Meshkov laser compression experiments and simulations

Strength at extreme pressures (>1 Mbar or 100 GPa) and high strain rates (106-108 s-1) of materials is not well characterized. The goal of the research outlined in this thesis is to study the strength of tantalum (Ta) at these conditions. The Omega Laser in the Laboratory for Laser Energetics in Rochester, New York is used to create such extreme conditions. Targets are designed with ripples or waves on the surface, and these samples are subjected to high pressures using Omega’s high energy laser beams. In these experiments, the observational parameter is the Richtmyer-Meshkov (RM) instability in the form of ripple growth on single-mode ripples. The experimental platform used for these experiments is the “ride-along” laser compression recovery experiments, which provide a way to recover the specimens having been subjected to high pressures. Six different experiments are performed on the Omega laser using single-mode tantalum targets at different laser energies. The energy indicates the amount of laser energy that impinges the target. For each target, values for growth factor are obtained by comparing the profile of ripples before and after the experiment. With increasing energy, the growth factor increased.

Engineering simulations are used to interpret and correlate the measurements of growth factor to a measure of strength. In order to validate the engineering constitutive model for tantalum, a series of simulations are performed using the code Eureka, based on the Optimal Transportation Meshfree (OTM) method. Two different configurations are studied in the simulations: RM instabilities in single and multimode ripples. Six different simulations are performed for the single ripple configuration of the RM instability experiment, with drives corresponding to laser energies used in the experiments. Each successive simulation is performed at higher drive energy, and it is observed that with increasing energy, the growth factor increases. Overall, there is favorable agreement between the data from the simulations and the experiments. The peak growth factors from the simulations and the experiments are within 10% agreement. For the multimode simulations, the goal is to assist in the design of the laser driven experiments using the Omega laser. A series of three-mode and four-mode patterns are simulated at various energies and the resulting growth of the RM instability is computed. Based on the results of the simulations, a configuration is selected for the multimode experiments. These simulations also serve as validation for the constitutive model and the material parameters for tantalum that are used in the simulations.

By designing samples with initial perturbations in the form of single-mode and multimode ripples and subjecting these samples to high pressures, the Richtmyer-Meshkov instability is investigated in both laser compression experiments and simulations. By correlating the growth of these ripples to measures of strength, a better understanding of the strength of tantalum at high pressures is achieved.

Depolarization loss compensated resonator for electro-optic Q-switched solid-state laser

A novel laser resonator for compensating depolarization loss that is due to thermally induced birefringence in active rod is reported. As this new structure being applied to an electro-optic Q-switched LIDA side-pumped Nd:YAG laser operating at a repetition rate of 1000 Hz, substantial reduction in depolarization loss has been observed, the output pulse energy is improved about 56% from that of a traditional resonator without compensation structure. With incident pump energy of 450 mJ per pulse, linearly polarized output energy of 30 mJ per pulse is achieved, the pulse duration is less than 15 ns, and the peak power of pulse is about 2 MW. The extinction ratio of laser beam is better than 10:1, and the beam divergence is 1.3 mrad with beam diameter of around 2.5 mm. (c) 2006 Published by Elsevier B.V.

Length at maturity in three pelagic sharks (Lamna nasus, Isurus oxyrinchus, and Prionace glauca) from New Zealand

Reproductive data collected from porbeagle, shortfin mako, and blue sharks caught around New Zealand were used to estimate the median length at maturity. Data on clasper development, presence or absence of spermatophores or spermatozeugmata, uterus width, and pregnancy were collected by observers aboard tuna longline vessels. Direct maturity estimates were made for smaller numbers of sharks sampled at recreational fishing competitions. Some data sets were sparse, particularly over the vital maturation length range, but the availability of multiple indicators of maturity made it possible to develop estimates for both sexes of all three species. Porbeagle shark males matured at 140–150 cm fork length and females at about 170–180 cm. New Zealand porbeagles therefore mature at shorter lengths than they do in the North Atlantic Ocean. Shortfin mako males matured at 180–185 cm and females at 275 –285 cm. Blue shark males matured at about 190 –195 cm and females at 170–190 cm; however these estimates were hampered by small sample sizes, difficulty obtaining representative samples from a population segregated by sex and maturity stage, and maturation that occurred over a wide length range. It is not yet clear whether regional differences in median maturity exist for shortfin mako and

Habitat and diet overlap of 4 piscivorous fishes: variation on the inner continental shelf off New Jersey

Piscivorous fishes, many of which are economically valuable, play an important role in marine ecosystems and have the potential to affect fish and invertebrate populations at lower trophic levels. Therefore, a quantitative understanding of the foraging ecology of piscivores is needed for ecosystem-based fishery management plans to be successful. Abundance and stomach contents of seasonally co-occurring piscivores were examined to determine overlap in resource use for Summer Flounder (Paralichthys dentatus; 206–670 mm total length [TL]), Weakfish (Cynoscion regalis; 80–565 mm TL), Bluefish (Pomatomus saltatrix; 55–732 mm fork length [FL]), and Striped Bass (Morone saxatilis; 422–920 mm FL). We collected samples from monthly, fishery-independent trawl surveys conducted on the inner continental shelf (5–27 m) off New Jersey from June to October 2005. Fish abundances and overlaps in diet and habitat varied over this study period. A wide range of fish and invertebrate prey was consumed by each species. Diet composition (determined from 1997 stomachs with identifiable contents) varied with ontogeny (size) and indicated limited overlap between most of the species size classes examined. Although many prey categories were shared by the piscivores examined, different temporal and spatial patterns in habitat use seemed to alleviate potential competition for prey. Nevertheless, the degree of overlap in both fish distributions and diets increased severalfold in the fall as species left estuaries and migrated across and along the study area. Therefore, the transitional period of fall migration, when fish densities are higher than at other times of the year, may be critical for unraveling resource overlap for these seasonally migrant predators.

A new species of Cyphocarcinus and a new record of Macropodia formosa Rathbun (Crustacea, Decapoda, Majidae) from Pakistan

The present paper includes a new species and a new record of majid crabs. The new species is referable to the genus Cyphocarcinus, subfamily Mithracinae of which only the genus Micippa was known from the region. Macropodia formosa Rathbun is being recorded for the first time from Karachi and belongs to the subfamily Inachinae. Both the species are described and illustrated. The new species is compared with its allied species.

A method and tool for 'cradle to grave' embodied carbon and energy impacts of UK buildings in compliance with the new TC350 standards

As operational impacts from buildings are reduced, embodied impacts are increasing. However, the latter are seldom calculated in the UK; when they are, they tend to be calculated after the building has been constructed, or are underestimated by considering only the initial materials stage. In 2010, the UK Government recommended that a standard methodology for calculating embodied impacts of buildings be developed for early stage design decisions. This was followed in 2011-12 by the publication of the European TC350 standards defining the 'cradle to grave' impact of buildings and products through a process Life Cycle Analysis. This paper describes a new whole life embodied carbon and energy of buildings (ECEB) tool, designed as a usable empirical-based approach for early stage design decisions for UK buildings. The tool complies where possible with the TC350 standards. Initial results for a simple masonry construction dwelling are given in terms of the percentage contribution of each life cycle stage. The main difficulty in obtaining these results is found to be the lack of data, and the paper suggests that the construction and manufacturing industries now have a responsibility to develop new data in order to support this task. © 2013 The Authors. Published by Elsevier B.V. All rights reserved.

A new hydrometallurgical process for extracting rare earths from apatite using solvent extraction with P-350

In this paper, a new process is proposed to recover rare earths from nitric acid leaching of apatite without interfering with the normal route for fertilizer production using solvent extraction with dimethyl heptyl methyl phosphonate CH3P(O)(OC8H17)(2) (P-350, B). In the present work, the leaching conditions are studied. In selected condition, apatite was dissolved in 20% (v/v) nitric acid solution at 60-70 degrees C while agitating. The most suitable acidity for extraction is 0.4 M HNO3. More than 98% of rare earths in apatite can be recovered using countercurrent extraction process with six stages when phase ratio = 0.5, and defluorination is unnecessary. The influences of phase ratio, stage number, acidity and salting-out agent on extractabilities Of P-350 are studied. The results show that rare earths can be separated with P-350 from Ca, P, Fe and other impurities. Mixed rare earth oxides (REO) of which purity is more than 95% with yield over 98% can be obtained.

A new model to estimate significant wave heights with ERS-1/2 scatterometer data

A new model is proposed to estimate the significant wave heights with ERS-1/2 scatterometer data. The results show that the relationship between wave parameters and radar backscattering cross section is similar to that between wind and the radar backscattering cross section. Therefore, the relationship between significant wave height and the radar backscattering cross section is established with a neural network algorithm, which is, if the average wave period is <= 7s, the root mean square of significant wave height retrieved from ERS-1/2 data is 0.51 m, or 0.72 m if it is >7s otherwise.

A new three-phase culture method for Manila clam, Ruditapes philippinarum, farming in northern China

Studies on reproduction, hatchery management, and culture of Manila clams Ruditapes philippinarum were carried out in an attempt to optimize their culture conditions and techniques. Results from these studies led to the development of a three-phase culture method for Manila clam farming in northern China. The key components of the new method were: 1) early spawning and over-wintering indoors (greenhouse); 2) optimized larval culture conditions and techniques; 3) juvenile rearing in shallow, fertilized nursery ponds; 4) optimized stocking size and density and substrate for mudflat grow out. Broodstock were maturated indoors for a month from early April to early May. Primarily because of higher water temperatures in the greenhouse the clams spawned more than one month earlier than in the natural environment. From May to July, juveniles were reared for 1-2 months indoors to a size of 2.0-3.0 mm in shell length before being moved to outdoor, pre-disinfected, nursery ponds. Juveniles were then reared in the nursery ponds for one month to about 1.0 cm before being transferred to the mudflat for grow out. Juvenile clams in nursery ponds grew considerably faster than in the natural environment probably because of higher temperatures and more abundant natural food. During grow out, the clams were reared for 4-7 months until they reached a market size (3.0-3.3 cm). Juveniles produced after August were over-wintered in the greenhouse in which the water temperature was about 3 degrees C higher than that of the outdoor environment. Juveniles grew at an average rate of > 20 mu m day(-1), while in the natural environment no growth was observed during winter because of low temperatures. Juveniles in the greenhouse grew to 2-3 mm by the following March before being moved into outdoor nursery ponds. The three-phase culture method not only shortened the production period from spawn to market size from 24-36 months to about 10-14 months, but also prolonged the spawning season from 2 to 7 months, resulting in increased production of seed and market-size clams. Compared with the traditional method, the new method could increase the yield of market-size clams by 10-11 times, and increase the profit per ha mudflat by as much as 124 times and the profit per kg market-size clams produced by 13 times. (c) 2006 Elsevier B.V. All rights reserved.

A new genus of grasshopper (orthoptera : acridoidea : Catantopidae : Cyrtacanthacridinae) from China

This paper reports a new genus i.e. Parapachyacris gen. nov and a new species Parapachyacris taiwanensis sp. nov in Cyrtacathacridinae. The new genus is similar to Pachyacris Uvarov, 1923 and differs from the latter in: 1) foveolae lacking; 2) hind tibiae with 10 spines on inner side and 8 spines on outer side; 3) basal part of prostemal process thickened; 4) cross veins right angled with longitudinal veins in apical part of tegmina and 5) the back of body with yellow longitudinal stripe in middle. The new genus is also similar to Patanga Uvarov, 1923 and differs from the latter in: 1) foveolae lacking; 2) basal part of prostemal process thickened; 3) upper side of hind femora with three dark bands and 4) black spots of tegmina lacking. Type specimen is deposited in the National Museum of Natural Science (NMNH), Taichung, Taiwan, China.

A new species and a key to known species of the genus Atractomorpha (Orthoptera, Acridoidea, Pyrgomorphidae) from China

A new species, Atractomorpha taiwanensis sp. n. from Taiwan, China, is described in this paper. The new species is similar to A. micropenna Zheng, 1992, but it differs from the latter by the following: lateral lobe of pronotum without membranous area near posterior margin; the tegmina strongly shortened, not reaching ( in male) the midpoint of hind femur; and wings very small, not reaching the midpoint of tegmina. A key to all known species of the genus Atractomorpha from China is given. The type specimens are deposited in the Museum of Hebei University, China.