The formation and properties of some cyclic compounds of silicon an dtin

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Some reactions of hydroperoxides in the presence of cyclic phosphate esters

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

VSC topology comparison for STATCOM application under unbalanced conditions

This paper compares the performance of four different power electronic converter topologies, which have been proposed for STATCOM applications. Two of the topologies are Modular Multilevel Cascaded Converters (MMCC), whilst the remaining circuits utilize magnetic elements and an open-winding transformer configuration to combine individual power modules. It is assumed that the STATCOM has to work under unbalanced conditions, so that it delivers both positive and negative sequence currents. Simulation studies for the four topologies have been carried out using the simulation tool Saber. © 2013 IEEE.

On the sense preserving mappings in the Helm topology in the plane

∗Research supported by the grant No. GAUK 186/96 of Charles University.

Descriptive Sets and the Topology of Nonseparable Banach Spaces

This paper was extensively circulated in manuscript form beginning in the Summer of 1989. It is being published here for the first time in its original form except for minor corrections, updated references and some concluding comments.

Microarray analysis of expression of cell death-associated genes in spinal cord cells with cyclic tensile strain

Previous studies have described alterations in gene expression following spinal cord injury, but this response to mechanical stimuli is difficult to investigate in vivo. Therefore, we have investigated the effect of cyclic tensile strain on cultured spinal cord cells from E15 Sprague-Dawley rats. Microarray analysis of gene expression and categorization of identified genes were performed using Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) systems. The application of cyclic tensile strain reduced the viability of cultured spinal cord cells significantly in a dose- and time-dependent manner. GO analysis identified candidate genes related to apoptosis (44) and to response to stimulus (17). KEGG analysis identified changes in the expression levels of 12 genes of the mitogen-activated protein kinase (MAPK) signaling pathway, which were confirmed to be upregulated and validated by RT-PCR analysis. Spinal cord cells undergo cell death in response to cyclic tensile strain, which were dose- and time-dependent, with upregulation of various genes, in particular of the MAPK pathway.

The Matrix Method of Determining the Fault Tolerance Degree of a Computer Network Topology

This work presents a theoretical-graph method of determining the fault tolerance degree of the computer network interconnections and nodes. Experimental results received from simulations of this method over a distributed computing network environment are also presented.

Algorithm of Consecutive Definition of Ranking of the Objects Nearest to the set Cyclic Relation between Objects

The problem of a finding of ranging of the objects nearest to the cyclic relation set by the expert between objects is considered. Formalization of the problem arising at it is resulted. The algorithm based on a method of the consecutive analysis of variants and the analysis of conditions of acyclicity is offered.

Second life battery energy storage systems:converter topology and redundancy selection

Battery energy storage systems have traditionally been manufactured using new batteries with a good reliability. The high cost of such a system has led to investigations of using second life transportation batteries to provide an alternative energy storage capability. However, the reliability and performance of these batteries is unclear and multi-modular power electronics with redundancy have been suggested as a means of helping with this issue. This paper reviews work already undertaken on battery failure rate to suggest suitable figures for use in reliability calculations. The paper then uses reliability analysis and a numerical example to investigate six different multi-modular topologies and suggests how the number of series battery strings and power electronic module redundancy should be determined for the lowest hardware cost using a numerical example. The results reveal that the cascaded dc-side modular with single inverter is the lowest cost solution for a range of battery failure rates.

Algorithms for Generating Near-Rings on Finite Cyclic Groups

In the present work are described the algorithms that generate all near-rings on finite cyclic groups of order 16 to 29.

Criterion of Normality of the Completely Regular Topology of Separate Continuity

2000 Mathematics Subject Classification: 54C10, 54D15, 54G12.

Central-tapped node linked modular fault-tolerance topology for SRM applications

Electric vehicles (EVs) and hybrid electric vehicles (HEVs) can reduce greenhouse gas emissions while switched reluctance motor (SRM) is one of the promising motor for such applications. This paper presents a novel SRM fault-diagnosis and fault-tolerance operation solution. Based on the traditional asymmetric half-bridge topology for the SRM driving, the central tapped winding of the SRM in modular half-bridge configuration are introduced to provide fault-diagnosis and fault-tolerance functions, which are set idle in normal conditions. The fault diagnosis can be achieved by detecting the characteristic of the excitation and demagnetization currents. An SRM fault-tolerance operation strategy is also realized by the proposed topology, which compensates for the missing phase torque under the open-circuit fault, and reduces the unbalanced phase current under the short-circuit fault due to the uncontrolled faulty phase. Furthermore, the current sensor placement strategy is also discussed to give two placement methods for low cost or modular structure. Simulation results in MATLAB/Simulink and experiments on a 750-W SRM validate the effectiveness of the proposed strategy, which may have significant implications and improve the reliability of EVs/HEVs.

Flexible fault-tolerant topology for switched reluctance motor drives

Switched reluctance motor (SRM) drives are one competitive technology for traction motor drives. This paper proposes a novel and flexible SRM fault-tolerant topology with fault diagnosis, fault tolerance, and advanced control functions. The converter is composed of a single-phase bridge and a relay network, based on the traditional asymmetrical half-bridge driving topology. When the SRM-driving system is subjected to fault conditions including open-circuit and short-circuit faults, the proposed converter starts its fault-diagnosis procedure to locate the fault. Based on the relay network, the faulty part can be bypassed by the single-phase bridge arm, while the single-phase bridge arm and the healthy part of the converter can form a fault-tolerant topology to sustain the driving operation. A fault-tolerant control strategy is developed to decrease the influence of the fault. Furthermore, the proposed fault-tolerant strategy can be applied to three-phase 12/8 SRM and four-phase 8/6 SRM. Simulation results in MATLAB/Simulink and experiments on a three-phase 12/8 SRM and a four-phase 8/6 SRM validate the effectiveness of the proposed strategy, which may have significant economic implications in traction drive systems.

Deployment of a Hybrid Multicast Switch in Energy-Aware Data Center Network: A Case of Fat-Tree Topology

Recently, energy efficiency or green IT has become a hot issue for many IT infrastructures as they attempt to utilize energy-efficient strategies in their enterprise IT systems in order to minimize operational costs. Networking devices are shared resources connecting important IT infrastructures, especially in a data center network they are always operated 24/7 which consume a huge amount of energy, and it has been obviously shown that this energy consumption is largely independent of the traffic through the devices. As a result, power consumption in networking devices is becoming more and more a critical problem, which is of interest for both research community and general public. Multicast benefits group communications in saving link bandwidth and improving application throughput, both of which are important for green data center. In this paper, we study the deployment strategy of multicast switches in hybrid mode in energy-aware data center network: a case of famous fat-tree topology. The objective is to find the best location to deploy multicast switch not only to achieve optimal bandwidth utilization but also to minimize power consumption. We show that it is possible to easily achieve nearly 50% of energy consumption after applying our proposed algorithm.

Hyperspaces, shape theory and computational topology

Esta tesis trata sobre aproximaciones de espacios métricos compactos. La aproximación y reconstrucción de espacios topológicos mediante otros más sencillos es un tema antigüo en topología geométrica. La idea es construir un espacio muy sencillo lo más parecido posible al espacio original. Como es muy difícil (o incluso no tiene sentido) intentar obtener una copia homeomorfa, el objetivo será encontrar un espacio que preserve algunas propriedades topológicas (algebraicas o no) como compacidad, conexión, axiomas de separación, tipo de homotopía, grupos de homotopía y homología, etc. Los primeros candidatos como espacios sencillos con propiedades del espacio original son los poliedros. Ver el artículo [45] para los resultados principales. En el germen de esta idea, destacamos los estudios de Alexandroff en los años 20, relacionando la dimensión del compacto métrico con la dimensión de ciertos poliedros a través de aplicaciones con imágenes o preimágenes controladas (en términos de distancias). En un contexto más moderno, la idea de aproximación puede ser realizada construyendo un complejo simplicial basado en el espacio original, como el complejo de Vietoris-Rips o el complejo de Cech y comparar su realización con él. En este sentido, tenemos el clásico lema del nervio [12, 21] el cual establece que para un recubrimiento por abiertos “suficientemente bueno" del espacio (es decir, un recubrimiento con miembros e intersecciones contractibles o vacías), el nervio del recubrimiento tiene el tipo de homotopía del espacio original. El problema es encontrar estos recubrimientos (si es que existen). Para variedades Riemannianas, existen algunos resultados en este sentido, utilizando los complejos de Vietoris-Rips. Hausmann demostró [35] que la realización del complejo de Vietoris-Rips de la variedad, para valores suficientemente bajos del parámetro, tiene el tipo de homotopía de dicha variedad. En [40], Latschev demostró una conjetura establecida por Hausmann: El tipo de homotopía de la variedad se puede recuperar utilizando un conjunto finito de puntos (suficientemente denso) para el complejo de Vietoris-Rips. Los resultados de Petersen [58], comparando la distancia Gromov-Hausdorff de los compactos métricos con su tipo de homotopía, son también interesantes. Aquí, los poliedros salen a relucir en las demostraciones, no en los resultados...