Bacterial load in pond water and different organs of a Indian major carp Cirrhinus mrigala Ham.

During the study period (August, 1993 to July,l994) the mean bacterial load in surface water was found to vary from 1.39 xl05 (July'94) to 3.llxl07CFU/ml (September'93), while that of botrom water ranged from l.Olxl06 (May'94) to 5.90xl07CFU/ml (October '93). The mean total number of bacterial load in body slime, liver and kidney was found to vary from 0.58xl03 (July'94) to 2.37xl07CFU/g (March'94),from 0.22xl03(July'94)to 9.64xl06 CFU/g (March'94) from O.l5xl03 (July'94) to 9.36xl06 CFU/g (March'94), respectively. Bacterial load in slime was significantly correlated with bacterial load in liver, bacterial load in slime was significantly correlated with bacterial load in kidney and bacterial load in liver was significantly correlated with bacterial load in kidney.

Portable electronic warp load meter

A portable type warp load meter has been developed for the use in fishing trawlers. The instrument enables to monitor the warp load in fishing trawlers accurately and easily without disturbing the routine fishing operations. The instrument can be used in several other places like cranes, bollard tests for marine engines, dry docks etc. especially when the operation has to be conducted easily without disturbing the load system. The information displayed in micro ammeter in the range 0 to 1000 kg can be fed to continuous recorders for detailed analysis and permanent records.

Response of extract release volume to the variations in pH and microbial load during spoilage of fish at refrigeration temperature

This report briefly describes the microbial status and storage properties of fish raised under composite fish culture in sewage fed ponds.

Preservation of Sardinella longiceps in iced and chilled seawater. Part 1 - Changes during storage with particular reference to bacterial load and nitrogenous compounds

Oil sardines in prime condition were subjected to onboard chilling. Two lots were chilled in CSW (samples C and CI), a third lot was chilled in crushed ice (sample I) and a fourth lot left not iced on deck (Sample AI). Upon landing sample AI was iced and sample CI was removed from the CSW and iced. All the four samples were kept in a chilled room for storage studies. The fish chilled and stored in CSW recorded the least, and the fish subjected to delayed icing, the highest values for all the indices of spoilage namely, free amino nitrogen, trimethylamine (TMA) and total volatile base nitrogen (TVBN). The total psychrophilic bacterial number also showed a similar trend. The organoleptic assessment of the cooked samples revealed C I, CI, AI to be the order of preference throughout the storage. This assessment was found to hold good for the rest of the parameters as well. The CSW held fishes were found to be distinctly superior to the iced ones for the first five days of storage. Such a marked prevalence in quality for five days would suffice for the fish to fetch a premium in the market over other landings of the same fish whether chilled or not chilled. Chilling on board in CSW and icing the same after landings, did not show encouraging results.

Load-displacement behavior during sharp indentation of viscous-elastic-plastic materials

A constitutive equation is developed for geometrically-similar sharp indentation of a material capable of elastic, viscous, and plastic deformation. The equation is based on a series of elements consisting of a quadratic (reversible) spring, a quadratic (time-dependent, reversible) dashpot, and a quadratic (time-independent, irreversible) slider-essentially modifying a model for an elastic-perfectly plastic material by incorporating a creeping component. Load-displacement solutions to the constitutive equation are obtained for load-controlled indentation during constant loading-rate testing. A characteristic of the responses is the appearance of a forward-displacing "nose" during unloading of load-controlled systems (e.g., magnetic-coil-driven "nanoindentation" systems). Even in the absence of this nose, and the associated initial negative unloading tangent, load-displacement traces (and hence inferred modulus and hardness values) are significantly perturbed on the addition of the viscous component. The viscous-elastic-plastic (VEP) model shows promise for obtaining material properties (elastic modulus, hardness, time-dependence) of time-dependent materials during indentation experiments.

Estimating material elasticity by spherical indentation load-relaxation tests on viscoelastic samples of finite thickness

A two-step viscoelastic spherical indentation method is proposed to compensate for 1) material relaxation and 2) sample thickness. In the first step, the indenter is moved at a constant speed and the reaction force is measured. In the second step, the indenter is held at a constant position and the relaxation response of the material is measured. Then the relaxation response is fit with a multi-exponential function which corresponds to a three-branch general Maxwell model. The relaxation modulus is derived by correcting the finite ramp time introduced in the first step. The proposed model takes into account the sample thickness, which is important for applications in which the sample thickness is less than ten times the indenter radius. The model is validated numerically by finite element simulations. Experiments are carried out on a 10% gelatin phantom and a chicken breast sample with the proposed method. The results for both the gelatin phantom and the chicken breast sample agree with the results obtained from a surface wave method. Both the finite element simulations and experimental results show improved elasticity estimations by incorporating the sample thickness into the model. The measured shear elasticities of the 10% gelatin sample are 6.79 and 6.93 kPa by the proposed finite indentation method at sample thickness of 40 and 20 mm, respectively. The elasticity of the same sample is estimated to be 6.53 kPa by the surface wave method. For the chicken breast sample, the shear elasticity is measured to be 4.51 and 5.17 kPa by the proposed indentation method at sample thickness of 40 and 20 mm, respectively. Its elasticity is measured by the surface wave method to be 4.14 kPa. © 2011 IEEE.

Report of the socio-economic baseline assessment dissemination meeting, Yangon, Myanmar, 28 January, 2015

The Data Dissemination Stakeholder Meeting was was a means of disseminating data from a socio-economic baseline study undertaken in 2014 (Schneider at al 2014). Implications included: the importance of heterogeneity of communities; population structure and migration trends; livelihoods diversity and vulnerability; and stakeholder mobilisation.

Socio-economic baseline assessment: Thayawthatangyi and Langan Islands, Myeik Archipelago, Myanmar

This report details the methodology and results of a 2014 socio-economic baseline assessment of 4 villages in the Myeik Archipelago, Myanmar undertaken as part of a programme to build local stakeholders capacity to use data to inform marine resource planning and managemnt