A forced running wheel system with a microcontroller that provides high-intensity exercise training in an animal ischemic stroke model

We developed a forced non-electric-shock running wheel (FNESRW) system that provides rats with high-intensity exercise training using automatic exercise training patterns that are controlled by a microcontroller. The proposed system successfully makes a breakthrough in the traditional motorized running wheel to allow rats to perform high-intensity training and to enable comparisons with the treadmill at the same exercise intensity without any electric shock. A polyvinyl chloride runway with a rough rubber surface was coated on the periphery of the wheel so as to permit automatic acceleration training, and which allowed the rats to run consistently at high speeds (30 m/min for 1 h). An animal ischemic stroke model was used to validate the proposed system. FNESRW, treadmill, control, and sham groups were studied. The FNESRW and treadmill groups underwent 3 weeks of endurance running training. After 3 weeks, the experiments of middle cerebral artery occlusion, the modified neurological severity score (mNSS), an inclined plane test, and triphenyltetrazolium chloride were performed to evaluate the effectiveness of the proposed platform. The proposed platform showed that enhancement of motor function, mNSS, and infarct volumes was significantly stronger in the FNESRW group than the control group (P<0.05) and similar to the treadmill group. The experimental data demonstrated that the proposed platform can be applied to test the benefit of exercise-preconditioning-induced neuroprotection using the animal stroke model. Additional advantages of the FNESRW system include stand-alone capability, independence of subjective human adjustment, and ease of use.

Evaluation of the efficacy of commercial sanitizers against adhered and planktonic cells of Listeria monocytogenes and Salmonella spp.

Antimicrobial activities of two commercial disinfectants, alone or combined with heat, against three Salmonella strains and three Listeria monocytogenes strains were studied. The efficacy of disinfectants against planktonic bacteria and bacteria attached to three food contact industrial surfaces (stainless steel, polytetraflourethylene, and rubber) was investigated. The tests were conducted using the sanitizer (quaternary ammonium compounds, and alquyldiethylenediamineglycine and di-alquyldiamineethylglycine) concentrations recommended by the manufacturers, and concentrations twice and four times higher than those values. The recommended concentrations were not effective to kill bacteria, especially when they were attached to surfaces. Concentrations of disinfectants twice and four times higher than those recommended were needed to fully eliminate planktonic bacteria. These same sanitizer concentrations were not sufficient to remove attached bacteria. To remove them from the surfaces, a treatment with recommended concentrations in combination with heat was needed. Our results indicate that these two pathogenic bacteria could survive common sanitation programs used in the food industry.

Interlake Tissue Mills Fire Slides

The Interlake Tissue Mills storage location was at the intersection of Glendale and Merritt Street in Merritton. In the 1850s, the Beaver Cotton Mills (later Merritton Cotton Mills) was built. It was a frame building that burned down in 1881. A sandstone structure replaced the previous building. In 1906, the cotton mill closed and in 1912, the Independent Rubber Company took over the building. The mill was doubled in size. The rubber company remained there for ten years and then the building remained vacant until 1935. Interlake Tissue Mills acquired the building for storage purposes. A fire razed the larger of the plant’s buildings on Memorial Day weekend in 1961. After the fire, Domtar used the smaller building for storage for a short time. This is currently the site of the Keg Restaurant.

Canada Starch Company (CASCO) Fonds, 1980-1987, n.d.

CASCO (Canada Starch Company) began operations in 1982 and was officially opened in May of 1983. Premier William Davis was in attendance. CASCO is a company whose roots can be traced back to 1858 when it was founded by W.T. Benson in Cardinal, Ontario. The company grew as corn uses were developed. Corn derived products now include: corn oil, liquid sweetener and feed for dairy and cattle. Starch is used as a finish for fine papers, a component in dry cell batteries, pharmaceuticals, wallpaper, film, tires, surgical dressings, plastics and plywood. Corn syrup is used in beverages, canned fruit, frozen seafood, licorice, ice cream and baking products. Corn solubles are used in animal feed, rubber substitutes, soap, paint and varnish. There are more than 250 industrial and food uses for corn

Vers une transition forestière en Thaïlande? : analyse causale de l’avancée des forêts à partir du cas de Phetchabun

Selon des thèses développées au cours des années 1990 et 2000, le développement économique constitue à la fois la source et la solution aux problèmes environnementaux. Au sujet des forêts, les transitions forestières (c’est-à-dire le passage de la déforestation à la reforestation) documentées dans certains pays développés seraient causées par des dynamiques universelles intrinsèques au développement et à la modernisation des sociétés. Nos travaux ont porté sur l’application de cette vision optimiste et controversée à l’évolution des superficies forestières en Thaïlande. S’appuyant sur une recension de la littérature, sur des données secondaires ainsi que nos travaux de terrain dans la région de Phetchabun, la thèse offre les apports suivants. Elle démontre que contrairement à l’idée répandue en Thaïlande, le ralentissement de la déforestation a été suivi par une expansion forestière substantielle entre environ 1995 et 2005. Ce regain forestier est lié à la disparition presque complète de l’expansion agricole, à l’établissement de plantations sylvicoles et, surtout, à l’abandon de terres agricoles. Cet abandon agricole découle d’abord et avant tout de la faible et incertaine rentabilité de l’agriculture dans certaines zones non irriguées. Ce phénomène s’explique, entre autres, par la dégradation des sols et par l’incapacité des agriculteurs à contrer l’impact des transformations économiques internes et externes à la Thaïlande. L’accroissement de la pression de conservation n’a pu contribuer à l’expansion forestière que dans certains contextes (projets de reforestation majeurs appuyés par l’armée, communautés divisées, terres déjà abandonnées). Sans en être une cause directe, l’intensification agricole et la croissance des secteurs non agricoles ont rendu moins pénibles la confiscation et l’abandon des terres et ont permis que de tels phénomènes surviennent sans entraîner d’importants troubles sociaux. Dans un contexte d’accroissement des prix agricoles, notamment celui du caoutchouc naturel, une partie du regain forestier aurait été perdu depuis 2005 en raison d’une ré-expansion des surfaces agricoles. Cela illustre le caractère non permanent de la transition forestière et la faiblesse des mesures de conservation lorsque les perspectives de profit sont grandes. La thèse montre que, pour être robuste, une théorie de la transition forestière doit être contingente et reconnaître que les variables macro-sociales fréquemment invoquées pour expliquer les transitions forestières (ex. : démocratisation, intensification agricole, croissance économique) peuvent aussi leur nuire. Une telle théorie doit également prendre en compte des éléments d’explication non strictement économiques et souvent négligés (menaces à la sécurité nationale, épuisement des terres perçues comme arables et libres, degré d’attachement aux terres et capacité d’adaptation et résilience des systèmes agricoles). Finalement, les écrits sur la transition forestière doivent reconnaître qu’elle a généralement impliqué des impacts sociaux et même environnementaux négatifs. Une lecture de la transition forestière plus nuancée et moins marquée par l’obsession de la seule reforestation est seule garante d’une saine gestion de l’environnement en respect avec les droits humains, la justice sociale et le développement durable.

Ethnographie de l'usage rituel d'ayahuasca au Québec

L’ayahuasca est une décoction de plantes originaires de la forêt amazonienne. Elle contient la vigne nommée ayahuasca (Banistereopsis caapi) et un arbuste (Psychotria viridis). Ces plantes contiennent des substances psychoactives. Respectivement il s’agit de l’harmine et de la diméthyle-tryptamine (DMT). Ce mélange est utilisé par plusieurs peuples autochtones du bassin amazonien depuis une époque qui précède la Conquête. L’ayahuasca est utilisée par ces peuples à des fins chamaniques. Au début du 20e siècle, la demande en caoutchouc a engendrée une migration de travailleurs dans ces régions. Un de ces travailleurs d’origine africaine est entré en contact avec cette substance. De croyance chrétienne, il a interprété son expérience comme une rencontre avec le divin. Ceci l’a amené à fonder dans les années 30 une église syncrétique nommée Santo Daime. Depuis, l’utilisation rituelle d’ayahuasca est répandue dans le monde. Aujourd’hui, On retrouve au Québec des groupes faisant un usage rituel d’ayahuasca. Ce mémoire est une ethnographie d’un groupe actif au Québec. Ce groupe a fait l’objet d’observations participantes durant l’été 2010. L’étude a démontré que la participation aux cérémonies d’ayahuasca engendre des prises de conscience et le travail de groupe en permet l’intégration dans le quotidien des participants. De plus, la structure rituelle garanti un usage non abusif.

Monáitaga úai – Palabra que se hace amanecer : el cambio en las formas de “gobierno propio” entre la Gente de Centro del medio río Caquetá, Amazonia colombiana

Depuis la fin du XIXe siècle, des dynamiques sociales diverses – holocauste du caoutchouc, colonie pénale, missions catholiques, présence d’institutions gouvernementales et non gouvernementales — ont reconfiguré les formes d’organisation sociale des habitants du moyen fleuve Caquetá, dénommés Gens de centre. Nous nous arrêterons en particulier sur l’effet de ces changements sur leurs formes d’autonomie. Avec la reconnaissance par l’État, au cours des années 1980 et 1990, des peuples indigènes en tant que minorités ethniques, surgit une dichotomie entre ce qui est « traditionnel » autochtone, par opposition à ce qui est « moderne », étant donné les processus d’acculturation et inclusion de ces groupes dans la société majoritaire. Dans le présent travail, on établit une comparaison des figures « d’autorité traditionnelle » et de « leader », une différenciation faite dans la région du moyen fleuve Caquetá. Dans un premier temps, on donne un aperçu théorique de la figure de chef dans les terres basses de l’Amérique du Sud et sa validité et pertinence dans la situation du moyen fleuve Caquetá. Puis, l’on présente comment se forme l’autorité traditionnelle et ses champs d’action. On montre, de la même façon, les différents processus qui ont donné lieu à l’apparition de la figure de leader et les espaces où celle-ci évolue. La relation entre les deux figures est à la fois contradictoire et complémentaire. Finalement, on expose, avec des exemples concrets, les rapports entre les Gens de centre et les institutions gouvernementales et la remise en question de l’autonomie accordée aux groupes minoritaires dans la Constitution politique de la Colombie de 1991.

Copper Doped Methylene Blue Sensitized Poly(vinyl alcohol)–Acrylamide Films for Stable Diffraction Efficiency

Copper doped methylene blue sensitized poly(vinyl alcohol) (MBPVA)–acrylamide films were fabricated to improve the storage life of recorded gratings. The films were fabricated using gravity settling method and the copper chloride concentration was optimized as 3:18 10 3 mol/l for a dye concentration of 6:2 10 4 mol/l. The gratings recorded on the optimized film constitution could be stored for months with stable diffraction efficiency (24%) without any chemical or thermal fixing techniques. The resolution of the material is found to be unaffected with the addition of copper chloride.

Studies on the Toughening of Epoxy Resins

This thesis aims to develop new toughened systems for epoxy resin via physical and chemical modifications. Initially the synthesis of DGEBA was carried out and the properties compared with that of the commercial sample. Subsequently the modifier resins to be employed were synthesized. The synthesized resin were characterized by spectroscopic method (FTIR and H NMR), epoxide equivalent and gel permeation chromatography. Chemical modification involves the incorporation of thermoset resins such a phenolics, epoxy novolacs, cardanol epoxides and unsaturated polyester into the epoxy resin by reactive belnding. The mechanical and thermal properties of the blends were studied. In the physical modification route, elastomers, maleated elastomers and functional elastomers were dispersed as micro-sized rubber phase into the continuous epoxy phase by a solution blending technique as against the conventional mechanical blending technique. The effect of matrix toughening on the properties of glass reinforced composites and the effect of fillers on the properties of commercial epoxy resin were also investigated. The blends were characterized by thermo gravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, scanning electron microscopy and mechanical property measurements. Among the thermoset blends, substantial toughening was observed in the case of epoxy phenolic novolacs especially epoxy para cresol novolac (ECN). In the case of elastomer blending , the toughest blends were obtained in the case of maleic anhydride grafted NBR. Among functional elastomers the best results were obtained with CTBN. Studies on filled and glass reinforced composites employing modified epoxy as matrix revealed an overall improvement in mechanical properties

Effect of curing temperature , fibre loading and bonding agent on the equilibrium swelling of isora-natural rubbercomposites

Isora fibre-reinforced natural rubber (NR) composites were cured at 80, 100, 120 and 150°C using a low temperature curing accelerator system. Composites were also prepared using a conventional accelerator system and cured at 150°C. The swelling behavior of these composites at varying fibre loadings was studied in toluene and hexane. Results show that the uptake of solvent and volume fraction of rubber due to swelling was lower for the low temperature cured vulcanizates which is an indication of the better fibre/rubber adhesion. The uptake of aromatic solvent was higher than that of aliphatic solvent, for all the composites. As the fibre content increased, the solvent uptake decreased, due to the superior solvent resistance of the fibre and good fibre-rubber interactions. The bonding agent improved the swelling resistance of the composites due to the strong interfacial adhesion. Due to the improved adhesion between the fibre and rubber, the ratio of the change in volume fraction of rubber due to swelling to the volume fraction of rubber in the dry sample (V,) was found to decrease in the presence of bonding agent. At a fixed fibre loading, the alkali treated fibre composite showed a lower percentage swelling than untreated one for both systems showing superior rubber-fibre interactions.

A Novel Accelerator Combination for the Low Temperature Curing of Silica-Filled NBR Compounds

Zinc salts of ethyl, isopropyl, and butyl xanthates were prepared in the laboratory. The effect of these xanthates in combination with zinc diethyldithiocarbamate (ZDC) on the vulcanization of silica-filled NBR compounds has been studied at different temperatures. The cure times of these compounds were compared with that of NBR compounds containing tetramethylthiuram disulphide/dibenzthiazyl disulphide. The rubber compounds with the xanthates and ZDC were cured at various temperatures from 60 to 150°C. The sheets were molded and properties such as tensile strength, tear strength, crosslink density, elongation at break, compression set, abrasion resistance, flex resistance, heat buildup, etc. were evaluated. The properties showed that zinc salt of xanthate/ZDC combination has a positive synergistic effect on the cure rate and mechanical properties of NBR compounds.

Low Temperature Curing of NBR for Property Improvement

Zinc salts of ethyl, isopropyl, and butyl xanthates are prepared in the laboratory, and the effect of these xanthates with zinc diethyl dithiocarbamate (ZDC) on the vulcanization of HAF-filled nitrile butadiene rubber (NBR) compounds has been studied at different temperatures. The cure times of these compounds have been compared with that of NBR compounds containing TMTD/MBTS. The rubber compounds with the three xanthate accelerators and ZDC are cured at various temperatures from 60 to 150°C. The sheets are molded and properties such as tensile strength, tear strength, cross-link density, elongation at break, compression set, abrasion resistance, flex resistance, etc. have been evaluated. The properties show that zinc salt of the xanthate/ZDC accelerator system has a positive synergistic effect on the cure rate and mechanical properties of NBR compounds.

Studies on Xanthate/Dithiocarbamate Accelerator Combination in NR/BR Blends

Zinc butyl xanthate [Zn(bxt)2] was prepared in the laboratory . The effect of this xanthate with zinc diethyl dithiocarbamate (ZDC) on the vulcanization of natural rubber ( NR), polybutadiene rubber (BR), and NR/BR blend has been studied at different temperatures. The amounts of Zn (bxt)2 and ZDC in the compounds were optimized by varying the amount of ZDC from 0 . 75 to 1.5 phr and Zn (bxt)2 from 0 . 75 to 1 .5 phr. The cure characteristics were also studied . HAF filled NR, BR, and NR / BR blend compounds were cured at different temperatures from 60 to 150 C. The sheets were molded and properties such as tensile strength, tear strength, crosslink density and elongation at break, compression set, abrasion resistance, etc. were evaluated. The results show that the mechanical properties of 80NR/20BR blends are closer to that of NR vulcanizates, properties of 60NR/40BR blends are closer to BR vulcanizates, while the 70NR/30BR blends show an intermediate property.

Synergism of Xanthate/Dithiocarbamate Accelerator in Carbon Black Filled NR Compounds

Zinc salts of ethyl, isopropyl and butyl xanthates were prepared in the laboratory. The effect of these xanthates with zinc diethyldithiocarbamate (ZDC) on the vulcanization of HAF filled NR compound has been studied at different temperatures. The rubber compounds with the three xanthate accelerators and ZDC were cured at various temperatures from 60°C to 150°C. The sheets were moulded and properties such as tensile strength , tear strength , cross-link density, elongation -at-break, compression set, heat build up, abrasion resistance, flex resistance , etc. were evaluated . The properties showed that zinc xanthate/ZDC accelerator combination has a positive synergistic effect on the mechanical properties of NR compounds. The curing of HAF filled NR compound containing zinc xanthate /ZDC is slightly slower than the curing of the corresponding gum compounds . It is observed that, by gradually increasing the amount of the accelerator, the cure time of black filled NR compound can be made equal to that of the gum compou

EPDM/CIIR Blends : Effect of EPDM Grade on Mechanical Properties

Blends of chlorobutyl rubber (CIIR) with two grades of ethylene-propylene diene monomer rubber (EPDM) were prepared and the effect of blend ratio on the cure characteristics, hot air ageing resistance, steam ageing resistance, and mechanical properties were evaluated. The blend of CIIR with EPDM grade 301 T showed additive behavior and the blend with the other grade of EPDM (NDR 4640) showed synergistic behavior.