Efeito da adição do poli(etileno acrilato de metila) (ema) e da fibra de linter de algodão nas propriedades do poli(tereftalato de etileno) reciclado (petrec)

The development of new materials to fill the demand of technological advances is a challenge for many researchers around the world. Strategies such as making blends and composites are promising alternatives to produce materials with different properties from those found in conventional polymers. The objective of this study is to evaluate the effect of adding the copolymer poly(ethylene methyl acrylate) (EMA) and cotton linter fibers (LB) on the properties of recycled poly(ethylene terephthalate) (PETrec) by the development of PETrec/EMA blend and PETrec/EMA/LB blend composite. In order to improve the properties of these materials were added as compatibilizers: Ethylene - methyl acrylate - glycidyl methacrylate terpolymer (EMA-GMA) and maleic anhydride grafted polyethylene (PE-g-MA). The samples were produced using a single screw extruder and then injection molded. The obtained materials were characterized by thermogravimetry (TG), melt flow index (MFI) mensurements, torque rheometry, pycnometry to determinate the density, tensile testing and scanning electron microscopy (SEM). The rheological results showed that the addition of the EMA copolymer increased the viscosity of the blend and LB reduces the viscosity of the blend composite. SEM analysis of the binary blend showed poor interfacial adhesion between the PETrec matrix and the EMA dispersed phase, as well as the blend composite of PETrec/EMA/LB also observed low adhesion with the LB fiber. The tensile tests showed that the increase of EMA percentage decreased the tensile strength and the Young s modulus, also lower EMA percentage samples had increased the elongation at break. The blend composite showed an increase in the tensile strength and in the Young`s modulus, and a decrease in the elongation at break. The blend formulations with lower EMA percentages showed better mechanical properties that agree with the particle size analysis which showed that these formulations presented a smaller diameter of the dispersed phase. The blend composite mechanical tests showed that this material is stronger and stiffer than the blend PETrec/EMA, whose properties have been reduced due to the presence of EMA rubbery phase. The use of EMA-GMA was effective in reducing the particle size of the EMA dispersed phase in the PETrec/EMA blend and PE-g-MA showed evidences of reaction with LB and physical mixture with the EMA

Estudo sobre as potencialidades de compósitos à base de gesso e fibras de coco seco para aplicação na construção civil

The use of gypsum, one of the oldest building materials for the construction industry in the country has been experiencing a significant and steady growth, due to its low cost and some of its properties that confer comparative advantage over other binder materials. Its use comprises various applications including the coating of walls and the production of internal seals and linings. Moreover, the fibers are being increasingly incorporated into arrays fragile in an attempt to improve the properties of the composite by reducing the number of cracks, the opening of the same and its propagation velocity. Other properties, depending on the function of the component material or construction, among these thermal and acoustic performances, are of great importance in the context of buildings and could be improved, that is, having better performance with this embodiment. Conduct a comparative study of physico-mechanical, thermal and acoustic composite gypsum incorporating dry coconut fiber, in the form of blanket, constituted the main objective of this work. Improving the thermal and acoustic performances of precast gypsum, used for lining and internal vertical fences of buildings, was the purpose of development of these composites. To evaluate the effect of fiber content on the properties of the composites were used to manufacture the composite layer with different thicknesses. The composites were fabricated in the form of plates with dimensions of 500x500x24mm. To facilitate the comparative study of the properties were also made with material gypsum boards only. We then determined the physico-mechanical, thermal and acoustical plaster and composites. The results indicated that the composites were significant gains in relation to thermal performance and also acoustic, in certain frequency range, increasing the thickness of the blanket. Concerning other physical-mechanical properties, the results showed that although the compressive strength was lower than for the composite did not occur after a fracture catastrophic failure. The same trend was observed with regard to resistance to bending, since the composites have not suffered sudden rupture and still continued after the load supporting point of maximum load

Efeito da adição de fibras da palma do licuri (syagrus coronata) no comportamento físico e mecânico de compósitos de matriz cimentícia

This research was motivated by the requirement of asbestos s replacement in building systems and the need to generate jobs and income in the country side of the state of Bahia, Brazil. The project aimed at using fibers from licuri leaves (syagrus coronata), an abundant palm in the region, to produce composites appropriate for the sustainable production of cement fibre reinforced products in small plants. The composites were produced in laboratory using Portland cement CP-II-F32, sand, water, licuri palm fiber contents of 1.0, 1.5 and 2.0% by weight of binder (two different fiber length) and metakaolin. The latter was chosen as an additional binder for its efficiency to reduce the alkalinity of cementitious matrixes therefore preventing the degradation of vegetable fibers. The characterization of the composite components was carried out by sieving and laser particle size analyses, thermal analysis, fluorescence and X-ray diffraction. The composites performance was evaluated by 3- point-bending tests, compressive strength, ultrasound module of elasticity, free and restrained shrinkage, water capillarity absorption and apparent specific gravity. It has been found that the addition of fibers increased the time to onset of cracking over 200.00% and a 25% reduction in cracks opening in the restrained shrinkage test. The capillary absorption reduced about 25% when compared to fiber-free composites. It was also observed with regard to flexural strength, compressive strength and specific gravity, that the addiction of fibers did not affect the composite performance presenting similar results for compounds with and without fibers. In general it can be stated that the reinforced composite fibers of palm licuri presents physical and mechanical characteristics which enable them to be used in the intended proposals of this research

Avaliação do efeito da adição de resíduo de borracha de pneu e brita calcária na formulação de compósitos cimentíceos

Researches have shown that the introduction of rubber in concrete improves the features of its deformability, as well as contributes to environmental disposal of waste generated in the tire retreading process. Furthermore, there is a high availability of limestone within RN and CE country. Ignorance about this stone, does not allow its wide use as aggregate, leaving, this abundant supply idle. A composite of limestone gravel, with proportions of tire rubber waste which could be used as concrete would be an alternative to concrete for low applications. Therefore, this research aims to evaluate the characteristics of concrete containing limestone gravel and proportions of little aggregate replacement (sand) by tire rubber waste. To this goal, the material components of the concrete were characterized, concrete specimens with limestone gravel were made, from the dash 1.0: 2.5: 3.5, varying the water/cement ratio, and inserting a commercial plasticizer, without a proportion of residue, known as reference. From this, concrete with and without the presence of the additive in the same proportions were chosen, as well as these with the use of granite gravel, for being the most used. Selected the references, to these, replacements of little aggregate (sand) were added replaced by rubber waste from the tire retreading process, treated with 1M NaOH in proportions from 5.0 to 20.0 % by mass, cured and exposed to the semiarid environment. The results indicate the possibility of using limestone gravel in the concrete composition with workability correction using plasticizer. There was a decrease in the mechanical properties of the concrete with increments of waste rubber, but there is an improvement in toughness and deformability of the composite, which makes it interesting for the construction of non-structural concrete floors, as well as, the rubber waste delayed the hardening process, continuing to gain resistance after 28 days

Plásticos reforçados a base de tecidos híbridos: efeitos da anisotropia e geometria normativa na caracterização mecânica e da fratura

As most current studies, reinforced plastics have been, in recent years, a viable alternative in building structural elements of medium and large, since the lightness accompanied by high performance possible. The design of hybrid polymer composites (combination of different types of reinforcements) may enable structural applications thereof, facing the most severe service conditions. Within this class of composite materials, reinforced the underlying tissues hybrid high performance are taking space when your application requires high load bearing and high rigidity. The objective of this research work is to study the challenges in designing these fabrics bring these materials as to its mechanical characterization and fracture mechanisms involved. Some parameters associated with the process and / or form of hybridization stand out as influential factors in the final performance of the material such as the presence of anisotropy, so the fabric weave, the process of making the same, normative geometry of the specimens, among others. This sense, four laminates were developed based hybrid reinforcement fabrics involving AS4 carbon fiber, kevlar and glass 49-E as the matrix epoxy vinyl ester resin (DERAKANE 411-350). All laminates were formed each with four layers of reinforcements. Depending on the hybrid fabric, all the influencing factors mentioned above have been studied for laminates. All laminates were manufactured industrially used being the lamination process manual (hand-lay-up). All mechanical characterization and study of the mechanism of fracture (fracture mechanics) was developed for laminates subjected to uniaxial tensile test, bending in three and uniaxial compression. The analysis of fracture mechanisms were held involving the macroscopic, optical microscopy and scanning electron microscopy

Alternativas de ultimação de resíduo plástico termofixo

In the present work it was developed originals alternatives of enveronmentally safe and economically viable destination of thermoset plastic residue from a button factory, which at presnte stores such residue tempor and in a way that is inconvenient to the atmosphere, a waiting safe solutions. As the residue is not recycleab and its burning leberates strongly aggressive gases, safe alternatives were researched. Inicially, ghe residue in incineration was performed in cement ovens with precise control ofe emission of gases, but it was proved inviable due to its low calorific power, as well as the liberation of free lead in the ashes. An original and feasible option was the residue confinemente in soil-ciment blocks, lohich resulted in blocks highly resistant to simple compression with structural block, and also a significant increase in thermal resistence. Was got up other options of original and important composites as: making of blocks for pré-moulded flagstone, internal coating of walls with plaster being obtained good texture results, replenish of ceramic blocks and blocks with cement, also implying in increase of thermal resistance. Besides these original and scientific contributions, the it was technologically contribution of defreadation with suggestions of the material using torch of thermal plasm; for this was projected, built, characterized and tested a torch to it shapes it being obtained exciting results for the development of this technology come back for ending destruction from all the types of inconvenient garbage to the atmosphere

Sinterização de matrizes cerâmicas à base de alumina reforçadas por carbetos a partir de precursores poliméricos

Ceramic composites produced with polymerics precursors have been studied for many years, due to the facility of obtaining a complex shape, at low temperature and reduces cost. The main objective of this work is to study the process of sintering of composites of ceramic base consisting of Al2O3 and silicates, reinforced for NbC, through the technique of processing AFCOP, as well as the influence of the addition of LZSA, ICZ and Al as materials infiltration in the physical and mechanical properties of the ceramic composite. Were produced ceramic matrix composites based SiCxOy e Al2O3 reinforced with NbC, by hidrosilylation reaction between D4Vi and D1107 mixtured with Al2O3 as inert filler, Nb and Al as reactive filler. The specimens produced were pyrolised at 1200, 1250 and 1400°C and infiltred with Al, ICZ and LZSA, respectively. Density, porosity, flexural mechanical strength and fracture surface by scanning electron microscopy were evaluated. The microstructure of the composites was investigated by X-ray diffraction to identify the presence of crystalline phases. The composites presented apparent porosity varying of 31 up to 49% and mechanical flexural strength of 14 up to 34 MPa. The infiltration process improviment of the densification and reduction of the porosity, as well as increased the values of mechanical flexural strength. The obtained phases had been identified as being Al3Nb, NbSi2, Nb5S3, Nb3Si and NbC. The samples that were submitted the infiltration process presented a layer next surface with reduced pores number in relation to the total volume

Corpo e Velhice: um estudo da qualidade de vida de idosos da Vila Vicentina Júlia Freire em João Pessoa

The aim of this study was to follow the daily routine of elderly individuals residing at the Vila Vicentina Júlia Freire (VVJF) nursing home in João Pessoa, Brazil, observing and analyzing as much as possible, the way in which they live in a group and how they deal, through personal experiences, with their own body image and with that of others. The results were obtained from information considered relevant, according to the perspectives of the residents themselves, contained in narratives of their history and related to their quality of life. Our interest lays in how they coped with changes in their bodies at old age and adapted to the challenges of this new phase. To obtain this information, with significant expressions, we used the Narrative Interview (NI) as a research tool in order to redeem their life experience and develop an understanding of their impressions about the life experience at the current nursing home. We selected, among the housed, ten subjects - actors - to appear as a sample of the group together. The design of our sample had a hybrid model, combining two types: random sample (probability) and an intentional sample (not probability). After recording transcripts and ensuring that all the subjects showed common interests that were relevant to the group, we chose three categories for analysis as follows: a. the elderly as seen by themselves and by others; b. religiosity as a moral factor; c. intimacy and relationships. Our choice was based on the importance of the theme as a multidisciplinary topic in the quality of life of populations. The subjects, chosen as spokespersons for the VVJF, spoke, among other things, about the way in which they viewed the world, their own body and how they experienced the environment and their fellow residents, in an attitude of reflection and criticism that confirms the lucidity of an old age conditioned to an elderly institution. The method allowed us to investigate our subjects from a multidisciplinary point of view. We suggest other studies in assorted areas of the human sciences, having as principle, man at the center of all our scientific questionings. The paradigm that the elder is, necessarily, unhappy in his sheltered has been, in this job, broken through the testimonies collected, establishing multiple perspectives of the analyzed subjects by their respective narrative records. Involving the participation of researchers with major in Administration, Communication and Law, this study filled, in this aspect, the requirements of the multidisciplinarity of the Program of Pos-Graduation in Health Science

Trichodina colisae (Ciliophora: Trichodinidae): new parasite records for two freshwater fish species farmed in Brazil

Tricodinídeos são protozoários ciliados móveis com ampla distribuição mundial; são considerados um dos agentes parasitários que mais acometem peixes cultivados. No Brasil, a maioria dos tricodinídeos que parasitam importantes espécies de peixes cultivados são desconhecidos, o que requer mais estudos taxonômicos com esse grupo de parasitos. Este estudo caracteriza morfologicamente Trichodina colisae Asmat & Sultana, 2005 de pacu (Piaractus mesopotamicus) e do híbrido patinga (P. mesopotamicus × P. brachypomus) cultivados, respectivamente, no Centro-Oeste e Sudeste do Brasil. Foram feitas montagens a fresco do raspado de muco da pele, nadadeiras e brânquias, fixados com metanol e, posteriormente, impregnados com nitrato de prata e coradas com Giemsa para avaliação em microscopia óptica. O presente estudo relata não só a segunda ocorrência de T. colisae no mundo, mas também a primeira ocorrência na América do Sul.

Correlações genéticas e fenotípicas em duas populações de milho (Zea mays L.) braquítico e suas implicações no melhoramento do teor de óleo no grão

Coeficientes de correlações genéticas e fenotípicas foram estimados entre os caracteres: altura da planta (AP); altura da espiga (AE); peso de espigas (PE) e teor de óleo (TO). As estimativas foram obtidas para duas populações braquíticas de milho (Piranão VD-2 e Piranão VF-1), baseado em espiga por fileira, utilizando-se testemunha intercalar, onde a cada duas progênies plantava-se uma fileira do híbrido simples AG 305-B. Os valores das correlações genéticas aditivas encontradas entre os caracteres altura da planta, altura da espiga e peso de espigas, foram todos positivos. Para o caráter teor de óleo, quando correlacionado com os demais caracteres, os valores das correlações obtidos foram negativos nas duas populações, exceção feita ao peso de espiga correlacionada com teor de óleo, na população Piranão VD-2, cujo valor foi positivo e próximo de zero. As respostas correlacionadas obtidas entre os caracteres, quando a seleção é praticada para o caráter teor de óleo e vice versa, independente do método de seleção empregado, mostram que a seleção para teor de óleo leva a modificação na estrutura da planta, para as duas populações.

Períodos de interferência de maria-pretinha sobre tomateiro industrial

Determinou-se os efeitos da convivência com plantas de maria-pretinha sobre a produtividade do tomateiro industrial, híbrido Heinz 9992, em um experimento com dois grupos de tratamentos: no primeiro, o tomate permaneceu livre da competição (60 mil plantas ha-1 de maria-pretinha) do transplantio até 15; 30; 45; 60; 75; 90; 105 e 120 dias (colheita); no segundo, a cultura permaneceu em competição com a maria-pretinha do transplantio até os mesmos períodos citados. Utilizaram-se blocos casualizados, três repetições e parcelas de quatro linhas. Altura, área foliar e massa seca da parte aérea da maria-pretinha foram obtidas a partir de amostras de dez plantas. A área foliar das plantas de maria-pretinha cresceu até 75 dias de convivência com as plantas de tomate (1.588 dm² planta-1), a altura até 60 dias de convivência (85 cm) e a massa seca da parte aérea até 120 dias de convivência (31,7 g planta-1). As produtividades mais alta (108,6 t ha-1 ou 87,6% da produção total de frutos) e mais baixa (14,2 t ha-1; 59,0%) de frutos maduros de tomate foram observadas quando a convivência entre tomate e maria-pretinha ocorreu respectivamente apenas nos 15 primeiros dias e ao longo de todo o ciclo do tomate. Nestes tratamentos, o peso médio de frutos maduros foi de respectivamente 58,7 e 38,0 g. Verificou-se que cada cm² de acréscimo em área foliar das plantas de maria-pretinha causou uma redução de 0,04 t ha-1 na produção de frutos maduros (PFM) (R² = 0,90), cada centímetro em altura da planta daninha reduziu 0,82 t ha-1 na PFM (R² = 0,78) e cada grama de acréscimo em massa seca de caules e folhas da planta daninha causou uma redução de 2,84 t ha-1 PFM (R² = 0,97). O período anterior à interferência, considerando-se a redução na produtividade do tomate em 5%, foi de 27 dias após o transplantio (DAT) da cultura; o período total de prevenção à interferência foi de 46 DAT e, o período crítico de prevenção à interferência, de 27 a 46 DAT.

Caracterização citogenética em Schlumbergera truncata (Haworth) Moran e Schlumbergera × buckleyi (T. Moore) Tjaden (Cactaceae)

O número cromossômico diplóide de Schlumbergera truncata e Schlumbergera x buckleyi, de indivíduos com diferentes tipos de coloração de pétalas, foi determinado usando-se pontas de raízes. A utilização de 8-hidroxiquinoleína 0,003 M à 36 °C por 3 horas possibilitou melhor separação cromossômica. Técnica de bandeamento C e de coloração Giemsa permitiram o estudo cariológico dessas espécies. O híbrido Schlumbergera × buckleyi (rósea) apresenta 2n = 22 cromossomos com fórmula cariotípica 16 M + 6 SM. Schlumbergera truncata, apresentando pétalas nas cores vermelha, branca e pink, possui 2n = 22 cromossomos, formulação cariotípica idêntica à de Schlumbergera × buckleyi, enquanto a planta com flores de coloração amarelada mostrou 2n = 34 cromossomos. A classificação cromossômica foi baseada no índice centromérico. Nas plantas que apresentam coloração vermelha, branca, pink e rósea nas pétalas, o melhor período de obtenção de metáfases corresponde ao período de florescimento. Schlumbergera truncata com flores amareladas apresenta dois picos anuais de divisão mitótica. Esses resultados dão suporte à um melhor entendimento da biologia no gênero Schlumbergera e auxiliam na classificação taxonômica nos casos onde apenas as características fenotípicas não são suficientemente confiáveis para a classificação das plantas no mesmo táxon.

Respostas de híbridos de milho ao nicosulfuron: I - aspectos biológlcos e da produção

Um ensaio de campo foi conduzido em 1994/95, na Fazenda de Ensino e Pesquisa da Faculdade de Ciências Agrárias e Veterinárias (UNESP) de Jaboticabal, SP, sendo os objetivos do trabalho comparar aspectos biológicos e produtivos de nove diferentes híbridos de milho, resultantes da aplicação da dose de 80 g.ha-1 de nicosulfuron {2- [[[[4,6-dimetoxi-2-pirimidina) amina] carboxil] amina] sulfonil] -N,N-dimetil-3-piridinacarboxiamida} em relação a plantas não tratadas. Verificou-se que o herbicida afetou significativamente alguns dos aspectos biológicos estudados (altura de plantas e de espigas, número de folhas, comprimento e largura de folhas e estande final) e não afetou os relacionados com a posição relativa das espigas, o diâmetro do colmo, as porcentagens de acamamento e de quebramento. A produtividade estimada dos híbridos tratados não foi afetada pela aplicação do produto, com exceção da estimada para o híbrido HT 2X.

Interferência das plantas daninhas sobre algumas características agronômicas e a produtividade de sete cultivares de milho

O presente trabalho teve por objetivo estudar o comportamento de 7 cultivares de milho (Zea mays L.) quanto à interferência da comunidade de plantas daninhas. Para tanto, os 7cultivares de milho (ESALQ VF-7, ESALQ VD-8, COMPOSTOS ARQUITETURA, FLINT e DENTADO, PIRANÃO e o híbrido CARGILL 501) foram submetidos a duas condições de interferência: com e sem, totalizando 14 tratamentos arranjados em esquema fatorial (7x2), instalados, no campo, em área experimental da FCAV/UNESP, Campus de Jaboticabal, seguindo o delineamento experimental de blocos ao acaso com 4 repetições. A comunidade infestante cujas espécies mais importantes foram SIDCO, BRAPL e ELEIN, estabeleceu-se a partir dos 14 dias após a semeadura, passando a interferir negativamente sobre a cultura a partir dos 35 dias. Os cultivares CD e CF apresentaram maior crescimento que os demais. A interferência da comunidade infestante reduziu a altura de inserção da primeira espiga; o comprimento e a circunferência das espigas, os pesos da espigas e dos grãos e a produção estimada da cultura, independente do cultivar. Os cultivares PIR e ARQ, independente da interferência, mostraram-se os menos produtivos. O cultivar Carg mostrou-se o mais produtivo mesmo quando sob interferência. O cultivar ARQ foi o mais sensível à interferência, enquanto PIR e VF-7 foram os menos sensíveis, podendo ser utilizados em programas de melhoramento genético visando tolerância a interferência de plantas daninhas.

Produção de repolho em função da aplicação de boro associada a adubo orgânico

Em condições de campo, em solo argiloso com teor médio de boro, foram avaliados os efeitos da adubação com boro, associada à adubação orgânica, na produção de repolho híbrido Kenzan. Cinco doses de B (0; 2,0; 4,0; 6,0 e 8,0 kg ha-1) foram associadas, em esquema fatorial, à ausência e presença (0 e 10 t ha-1) de vermicomposto de esterco bovino. O delineamento experimental foi em blocos casualizados com três repetições e as adubações orgânica e química foram feitas no sulco, por ocasião do transplantio das mudas. O ponto de colheita foi atingido 75 a 90 dias após o transplantio. A adubação com vermicomposto de esterco de bovino elevou a produção em 3,8 t ha-1, o diâmetro das cabeças de repolho em 0,8 cm e o peso das cabeças em 170 g. A produção de repolho aumentou linearmente com a adubação com B e variou de 52,94 t ha-1 a 65,95 t ha-1. A relação entre B no solo e produção foi linear e positiva.