599 resultados para Coco de Zambê


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Objetivou-se avaliar as características físicas, químicas e sensoriais da carne de búfalos abatidos em diferentes períodos de confinamento. Foram utilizados 20 bubalinos da raça Murrah, castrados, descornados, com idade média inicial de 15 meses, abatidos aos 75, 100, 125 ou 150 dias de confinamento. Após o abate, as carcaças foram identificadas e resfriadas por 24 horas. Durante a desossa, foram colhidas amostras do contrafilé entre a 10ª e 11ª costelas para análise das características sensoriais e das perdas por cocção; entre a 11ª e 12ª costelas para avaliação da composição centesimal, do valor calórico, do pH e do índice de fragmentação miofibrilar (IFM); e entre a 12ª e 13ª costelas para a avaliação do escore de marmorização e da força de cisalhamento. A composição centesimal, o pH, a força de cisalhamento, o valor calórico, as perdas por cocção e o IFM não diferiram estatisticamente entre os períodos de confinamento. O grau de marmorização diferiu entre as idades de abate, uma vez os animais abatidos aos 75 dias de confinamento apresentaram escore de 1,25; os abatidos aos 100 e 125 dias, escore 2; e aqueles abatidos aos 150 dias de confinamento, escore 2,2. em todos os períodos de confinamento, a carne bubalina foi classificada como macia (média 3,94 kgf) e apresentou com características que não diferiram pelo painel sensorial entre os 75 e 150 dias de confinamento. O abate de bubalinos aos 75 e 150 dias de confinamento não influencia as características sensoriais sabor, aroma e cor da carne bubalina.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The efficiency of inhibition to corrosion of steel AISI 1018 of surfactant coconut oil saponified (SCO) and heterocyclic type mesoionics (1,3,4-triazólio-2-tiolato) in systems microemulsionados (SCO-ME and SCO-ME-MI) Of type O/A (rich in water emulsion) region with the work of Winsor IV. The systems microemulsionados (SCO-ME and SCO-ME-MI) were evaluated with a corrosion inhibitor for use in saline 10,000 ppm of chloride enriched with carbon dioxide (CO2). The assessment of corrosion inhibitors were evaluated by the techniques of linear polarization resistance (LPR) and loss of weight (MW) in a cell instrumented given the gravity and electrochemical devices. The systems were shooting speed of less than 60 minutes and efficiency of inhibition [SCO-ME (91.25%) and SCO-ME-MI (98.54%)]

Relevância:

10.00% 10.00%

Publicador:

Resumo:

La presente investigación consiste en desarrollar un plan de exportación que permita a la marca SARAHDZ introducir satisfactoriamente las prendas diseñadas en El Salvador al mercado de Guatemala, con el propósito de lograr la aceptación de los consumidores del mercado meta. El primer capítulo contiene las definiciones del marketing generales que serán de utilidad para el desarrollo de dicho plan así mismo, su importancia permite crear una guía a emprendedores que deseen exportar. Se definen los elementos de un plan de exportación en donde el emprendedor debe enfocarse en seguir las estrategias correctas para internacionalizar su marca o empresa, llevando la logística adecuada en el proceso. Se toma en consideración los datos de exportación de El Salvador hacia Guatemala según el Banco Central de Reserva; la evolución del sector moda y confección en el país de origen del producto y el perfil del país de destino. El segundo capítulo contiene la información de campo realizada en el centro comercial Paseo Cayalá con el objetivo de conocer los componentes del mercado para la elaboración de un plan de exportación óptimo de ropa juvenil exclusiva creada en El Salvador. Se utilizó el tipo de investigación descriptiva con un enfoque mixto, es decir cualitativa y cuantitativa haciendo uso de las técnicas de encuesta, entrevista y observación, para la encuesta se determinó una muestra de 70 personas a través de la formula correspondiente. El perfil establecido para seleccionar a las personas a encuestar requiere de jóvenes en edad entre 18 y 35 años de la Ciudad de Guatemala que frecuentan o viven en Paseo Cayalá, la información fue procesada con el programa SPSS y posteriormente se analizó. La entrevista se realizó a 3 diseñadores de El Salvador los cuales son: Sara Hernández. Ivo Barraza y Guillermo Romero. A partir de los resultados obtenidos surgen conclusiones y recomendaciones para la elaboración del plan de exportación. Finalmente en el capítulo tres se elaboró el plan de exportación. Se inicia con el objetivo general del plan de exportación que es el siguiente: Elaborar y presentar un plan de exportación que permita introducir satisfactoriamente las prendas diseñadas de la marca SARAHDZ al mercado de Guatemala, con el propósito de lograr la aceptación de los consumidores del mercado meta Posteriormente se describe los productos a diseñar los cuales son pantalones para hombre, blusas y camisas para hombre las cantidades a exportar serán mínimas debido al concepto de exclusividad y diferenciación. La información para diseñar el modelo se obtuvo principalmente mediante fuentes secundarias, las cuales fueron validadas mediante entrevistas a personas ampliamente conocedoras de la industria de confección y moda, de su problemática y potencialidades. Luego se realizó el análisis FODA de Sara Hernández, y a partir de eso se diseñaron las estrategias. Una de las estrategias que se crearon fueron la de Resaltar la exclusividad del producto por medio de la alta calidad para diferenciarla de productos sustitutos y lograr ser la preferencia de los consumidores dicha estrategia es una de las herramientas para poder llegar a realizar el objetivo principal del plan de exportación. Se establecieron estrategias dirigidas hacia la empresa donde se mencionara una de las que posee este documento que se ha considerado importante: Expandir sus diseños exclusivos en al mercado internacional aprovechando la Integración Económica Centroamericana. Esta integración es un punto a favor debido a que se considera libre de impuesto por este tipo de negociaciones que posee el país y por ende se vuelve más bajo el costo de Exportación. También como lo pide un plan de exportación se realizó unas estrategias dirigidas al producto que es Aprovechar su participación a nivel internacional para posicionar su marca a nivel Centroamericano y otras estrategias dirigidas al mercado donde se establece el uso de publicidad en internet para dar a conocer los diseños exclusivos de Sara Hernández. Se iniciara con la boutique coco-line como distribuidor exclusivo exportando 30 prendas debido al concepto del producto de exclusividad, los diseños se actualizarán en cada trimestre y se implementarán otros nuevos. Serán analizados y elaborados en base a tendencias de moda internacional. Se planteó que se realizara una publicidad masiva en internet priorizando redes sociales donde se darán a conocer los diseños de ropa. Se participará en ferias realizadas en el lugar de venta paseo Cayalá, esto se efectuará antes de hacer la exportación de las prendas, luego se determinó una estrategia de entrada al mercado que dice de la siguiente manera: Hacer uso de la exportación indirecta para ingresar al mercado de Guatemala, esta estrategia consiste en seleccionar un distribuidor el cual compra los productos y asume la absoluta responsabilidad de venderlos en el mercado extranjero. El contrato se pactará bajo el incoterms DAF que consiste en que el vendedor cumple su obligación de entregar la mercancía cuando la pone despachada en aduana para la exportación luego queda la mercancía bajo la responsabilidad del comprador. La ruta del transportista es desde donde se sitúa la organización hasta la aduana las chinamas. En base a la proyección financiera se prevé que es factible la inversión por que genera un VAN positivo con un periodo de recuperación de inversión de dos años.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This research is about the use of the coconut´s endocarp (nucifera linn) and the waste of derivatives of wood and furniture as raw material to technological use. In that sense, the lignocellulosic waste is used for manufacture of homogeneous wood sheet agglomerate (LHWS) and lignocellulosic load which take part of a polymeric composite with fiber glass E (GFRP-WC). In the manufacturing of the homogeneous wood sheet agglomerate (LHWS), it was used mamona´s resin as waste s agglutinating element. The plates were taken up in a hydraulic press engine, heated, with temperature control, where they were manufactured for different percentage of waste wood and coconuts nucífera linn. Physical tests were conducted to determine the absorption of water, density, damp grade (in two hours and twenty-four hours), swelling thickness (in two hours and twenty-four hours), and mechanical tests to evaluate the parallel tensile strength (internal stick) and bending and the static (steady) flexural. The physical test´s results indicate that the LHWS can be classified as bonded wood plate of high-density and with highly water resistant. In the mechanical tests it was possible to establish that LHWS presents different characteristics when submitted to uniaxial tensile and to the static (steady) flexural, since brittle and elasticity module had a variation according to the amount of dry endocarp used to manufacture each trace of LHWS. The GFRP-WC was industrially manufactured by a hand-lay-up process where the fiber glass E was used as reinforcement the lignocellulósic´s waste as load. The matrix was made with ortofitalic unsaturated polyester resin. Physical and mechanical tests were performed in presence of saturated humidity and dry. The results indicated good performance of the GFRP-WC, as traction as in flexion in three points. The presence of water influenced the modules obtained in the flexural and tensile but there were no significant alteration in the properties analyzed. As for the fracture, the analysis showed that the effects are more harmful in the presence of damp, under the action of loading tested, but despite this, the fracture was well defined starting in the external parts and spreading to the internal regions when one when it reaches the hybrid load

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Since the middle 80 s from the 20th century, some musical genres associated to the Brazilian Northeastern region notably the forró, coco de embolada and repente de viola have been gradually incorporated to the musical production of south France linked to the occitanista trend, currently linking many musicians and groups from those regions in both countries. This paper is engaged in reflecting on the particular experience of the groups formed by the Escambiar Association, located on the city of Toulouse, and specially the duet Fabulous Trobadors, whose compositions are mostly made in the coco de embolada form. Watching the motivations and the processes that led to the creation of the groups from this association and it s current operation, this study investigates the transcultural phenomenon, that allow to cross two symbolic universes through rationalizing speeches about music, considering the locality s production in the midst of a political debate that involve questions about cultural identity and tradition

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In general, among the corrosion inhibitors surfactants are the most commonly used compounds, because they are significantly effective by forming protective films on anodic and cathodic areas. In this study, microemulsions containing he biodegradable saponified coconut oil as surfactant (SME-OCS) was used as green corrosion inhibitors. With this purpose, methanolic extracts of Ixora coccinea Linn (IC) and a polar fraction rich in alkaloids (FA) obtained from Croton cajucara Benth solubilized in the SME-OCS system were examined in the presence of AISI 1020 carbon steel, in saline solution (NaCl 3,5 %). The efficiency of corrosion inhibition of IC and FA were evaluated in the following microemulsions: SME-OCS-IC and SME-OCS-FA. The microemulsion system SME-OCS in the presence and absence of IC and FA was assessed by measurements of weight loss and the electrochemical method of polarization resistance, with variation in the concentration of IC and FA (50 - 400 ppm), showing significant results of corrosion inhibition (83,6 % SME-OCS; 92,2 % SME-OCS-FA; and 95,3 % SME-OCS-IC)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In the search for products that act as corrosion inhibitors and do not cause environmental, impact the use of plant extracts as corrosion inhibitors is becoming a promising alternative. In this work the efficiency of polar extracts (ethanol extracts) obtained from the plants Anacardium occidentale Linn (AO) and Phyllantus amarus Schum. & Thonn (PA) as corrosion inhibitors were evaluated in different concentrations. For that AO and PA extracts were solubilized in the microemulsion systems (SME) containing saponified coconut oil as surfactant (SME -OCS and SME-OCS-1) in saline (NaCl 3,5 %) solution, which was also used as electrolyte. Both SME-OCS and SME-OCS-1 were characterized by surface tension and viscosity methods showing a Newtonian fluid behavior. The SME-OCS and SME-OCS-1 systems satisfactorily solubilized the polar extracts AO and PA with measurements carried out by ultraviolet spectroscopy. The measurements of corrosion inhibition efficiencies were performed by the electrochemical linear polarization resistance (LPR) technique as well as weight loss, on the surface of AISI 1020 carbon steel. The maximum corrosion inhibition efficiencies were determined by extrapolation of Tafel plots, showing the following values: 95,6 % for the system SME-OCS-AO, 98,9 % for the system SME-OCS-AO-1 and 93,4 % for the system SME-OCS-PA

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Com o objetivo de avaliar as características de crescimento de mangueiras cultivadas em sistema orgânico foram avaliados cinco compostos orgânicos elaborados a partir da combinação entre os insumos capim elefante, bagaço de coco, restos de poda de videira, esterco de caprino e torta de mamona. O ensaio foi disposto em blocos ao acaso, sendo constituído de seis tratamentos (cinco compostos e uma testemunha) e quatro repetições. Não houve efeito dos tratamentos sobre a matéria orgânica e a CTC do solo, nem sobre as características de crescimento da mangueira (número de fluxos por ramo e comprimento do primeiro fluxo).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

     PAUL BIOLLEY ( 1862-1908), fue un destacado educador suizo, que llegó a Costa Rica en 1886, durante la administración de Bernardo Soto, en la que fungía como Secretario de Instrucción Pública Mauro Fernández. Fue contratado como profesor de la denominada entonces Escuela Normal y Modelo, que se transformó luego en el Liceo de Costa Rica. Desarrolló una muy notable labor docente en el campo de las ciencias naturales, y muchos de sus trabajos sobre Costa Rica gozan aún de prestigio y valor. Les dio un innegable impulso a las ciencias naturales, mediante variadas y constantes investigaciones; entre ellas sobre los moluscos de la Isla del Coco, sobre los invertebrados y otros temas más. También fue un notable traductor de obras científicas, sociales e históricas, varias de ellas relacionadas con Costa Rica.      En 1889 publicó en París, como fruto de su indudable interés por el presente y el futuro de nuestro país, la obra Costa Rica et son avenir [Costa Rica y su porvenir]. Es un estudio sobre el país en general, sus habitantes, sus zonas geográficas, sus rasgos culturales, su industria, comercio y hacienda. El capítulo final, «L'avenirr» , es de singular agudeza. Ya con tres años de haber vivido en Costa Rica, estuvo en condiciones de detectar aspectos esenciales de la historia nacional, del talante de sus pobladores y de muchos otros aspectos que, leídos desde hoy, parecen haberse escrito en nuestros días. Se trata de uno de los primeros documentos, escritos en lengua francesa, sobre la historia y la cultura costarricenses, de especial valor por dar cuenta de la percepción que de la nación se tenía a finales del siglo XIX.     LETRAS rescata, en esta sección «Documentos», una muestra escrita del legado de un brillante pedagogo y pensador, quien, como muchos otros extranjeros, se afincó en nuestro medio y trabajó con lealtad y generosidad en su nueva patria que fue, en el caso de Biolley, la definitiva. La Dirección de esta revista les agradece a los encargados de la Biblioteca de Libros Antiguos y Especiales, de la Universidad Nacional, haber permitido reproducir este documento, que forma parte del acervo bibliográfico de esa valiosa colección.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The program PROBIODIESEL from the Ministry of Science and Technology has substantially increased glycerine, obtained as a sub-product of biodiesel production process, making it necessary to seek alternatives for the use of this co-product. On the other hand, herbicides although play a role of fundamental importance in the agricultural production system in force, have been under growing concern among the various segments of society because of their potential environmental risk. In this work, we used glycerin in microemulsion systems for application of herbicides, to improve efficiency and lower environmental pollution caused by the loss of those products to the environment. To obtain the systems of microemulsinados were used Unitol L90 NP and Renex 40 as surfactants, butanol as co-surfactant, coconut oil as oil phase and aqueous phase as we used solutions of glycerin + water. Through the determination of phase diagrams, the microemulsion region was found in the system E (L90 Unitol, coconut oil and glycerin + water 1:1). Three points were chosen to the aqueous phase rich in characterization and application in the solubilization of glyphosate and atrazine. Three experiments were performed in Horta, Department of Plant Sciences, Plant Science Sector, UFERSA, Mossoró-RN. The first experiment was conducted in randomized complete blocks with 20 treatments and four replications. The treatments consisted of five doses of the herbicide glyphosate (0.0, 0.45, 0.9, 1.35 and 1.8 L ha-1) diluted with four sauces: C1, C2, C3 (microemulsions) and C4 (water). The phytotoxicity of Brachiaria brizantha was measured at 7, 14, 28 and 60 DAA (days after application). At 60 DAA, we evaluated the biomass of plants. The second experiment was developed in randomized complete blocks with 20 treatments and four repetitions. The treatments consisted of five doses of the herbicide atrazine (0.0, 0.4, 0.8, 1.6 and 2.4 L ha-1) diluted with four sauces: C1, C2, C3 (microemulsions) and C4 (water). The phytotoxicity on Zea mays and Talinum paniculatum was evaluated at 2, 7, 20 DAA. The experiment III was developed in randomized complete blocks with 16 treatments and three repetitions. The treatments consisted of 16 combinations among the constituents of the microemulsion: Unitol L90 surfactant (0.0, 1.66, 5.0, 15 %) and glycerin (0.0, 4.44, 13.33 and 40.0 %). The phytotoxicity on Zea mays was evaluated at 1, 7 and 14 DAA. At 14 DAA, we evaluated the biomass of plants. The control plants using the microemulsions was lower than in the water due to the poisoning caused by the initial microemulsions in the leaves of the plants, a fact that hinders the absorption and translocation of the herbicide. There was no toxicity in Zea mays plants caused by the herbicide, however, were highly intoxicated by microemulsions. T. paniculatum was better controlled in spraying with the microemulsions, regardless of the dose of the herbicide. The glycerine did not cause plant damage. Higher poisoning the plants are caused by tensoactive Unitol L90 and higher rates occur with the use of higher concentrations of surfactant and glycerin, or microemulsion. The microemulsions used hampered the action of glyphosate in controlling B. brizantha and caused severe poisoning in corn, and these poisonings attributed mainly to the action of surfactant

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The objective of this work was to evaluate the efficiency of two Amblyseius largoensis (Acari:Phytoseiidae) populations in controlling Raoiella indica (Acari: Tenuipalpidae). The treatments were: release of A. largoensis from the island of La Réunion; release of A. largoensis from the state of Roraima, Brazil; and a control, without predator release. Initially, 20 predators were released per plant; three other releases were done at a rate of ten adults per plant, at 46, 135, and 156 days after the first release. The population densities were estimated every 20 days, during six months. Both A. largoensis populations evaluated are not sufficiently efficient to control the R. indica population.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The produced water is a byproduct formed due to production of petroleum and carries with it a high amount of contaminants such as oil particles in suspension, organic compounds and metals. Thus, these latter pollutants are very difficult to treat because of its high solubility in water. The objective of this work is to use and evaluate a microemulsioned system to remove metals ( K , Mg , Ba , Ca , Cr , Mn , Li , Fe ) of synthetic produced water. For the extraction of metals, it was used a pseudoternary diagram containing the following phases: synthetic produced water as the aqueous phase (AP), hexane as organic phase (OP), and a cosurfactant/surfactant ratio equal to four (C/S = 4) as the third phase, where the OCS (saponified coconut oil) was used as surfactant and n-butanol as cosurfactant. The synthetic produced water was prepared in a bench scale and the region of interest in the diagram for the removal of metals was determined by experimental design called. Ten points located in the phase Winsor II were selected in an area with a large amount of water and small amounts of reagents. The samples were analyzed in atomic absorption spectrometer, and the results were evaluated through a statistical assesment, allowing the efficiency analysis of the effects and their interactions. The results showed percentages of extraction above 90% for the metals manganese, iron, chromium, calcium, barium and magnesium, and around 45% for metals lithium and potassium. The optimal point for the simultaneous removal of metals was calculated using statistical artifact multiple response function (MR). This calculation showed that the point of greatest extraction of metals occurs was the J point, with the composition [72% AP, 9% OP, 19% C/S], obtaining a global extraction percentage about 80%. Considering the aspects analyzed, the microemulsioned system has shown itself to be an effective alternative in the extraction of metals on synthetic produced water remediation

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Ciências da Saúde, Programa de Pós-Graduação em Ciências da Saúde, 2016.