Estudo do potencial refratário de argilas sílico-aluminosas do Rio Grande do Norte

The segment of the structural ceramics industry is one of the most important to the economy of Rio Grande do Norte. The supply chain makes a total of 206 companies that are distributed in 39 counties, concentrated in three regional centers: Seridó Apodi / Assu and great Natal. The ceramic industry in the state is around 80 million pieces per month, with 50,186 million of these tiles, which makes the Rio Grande do Norte one of the largest manufacturers of product in the Country. Different ceramic products can be manufactured by mixing two or more clays and accessory minerals. Mixtures acquire characteristics and form what is called the ceramic body. Refractory masses have a high melting point and thermal shock support. Its composition contains refractory clays with a little iron oxide and material fluxes. A line of semi-refractory ceramic products that stands out for its high added value are the bricks in ivory or red, used in building barbecues, fireplaces, wood stoves and braziers. The aim of this study was to use alumina-clay or silica- alumina-clay to the industrial RN, for the production of refractory bricks semi-refractory burning light. Clay and Kaolin were characterized for their chemical and mineralogical composition, immediately after ceramic bodies were made with different concentrations of the components, they were raised, pressed and sintered. After sintering the resulting products were characterized in terms of mechanical, thermal and dimensional than the characterization by X-ray diffraction and scanning electron microscopy. After obtaining the results, we concluded that the studied clay can be used for the production of semi-refractory bricks

Análise da adição de resíduo oriundo do tratamento de esgotos em massa cerâmica utilizada para fabricação de telhas

Sludge of Wastewater Treatment Plants (WTPs) disposal is a problem for any municipality, for this reason the amount of sludge production is now a key issue in selecting treatment methods. It is necessary to investigate new applications for this waste type, due to the restrictions imposed by the environmental organs. The raw materials used in the Red Ceramic, are generally very heterogeneous, for this reason, such materials can tolerate the presence of different types of wastes. In Rio Grande do Norte, the roof tiles production corresponds to 60,61% from the total of ceramic units produced. Due to the importance of the ceramic industry of roof tiles for the state, allied to the environmental problem of the sludge disposal, this work had for objective to verify the possibility of the incorporation of sewage sludge in ceramic body used for production of roof tiles. In the research, sludge originating from drying beds of WTP of the Central Campus from UFRN and clays originating from a ceramic industry from Goianinha/RN were used. The raw materials were characterized by techniques of: analysis of particles distribution by diffraction to laser; real density; consistence limits; chemical analysis by X-ray fluorescence; mineralogical analysis by X-ray diffraction; organic matter; and solids content. Five batches of roof tiles were manufactured in the approximate dosages of 2%, 4%, 6%, 8% and 10%. To evaluate the properties of each final product, tests of water absorption, impermeability, bending strength, leachability and solubility were accomplished. The roof tiles manufactured with sludge presented characteristics similar to the roof tiles without sludge in relation to the environmental risk. The results showed that it is possible to use approximately up to 4% of sludge in ceramic bodies for production of roof tiles. However, it is observed that the high amount of organic matter (71%) present in the sludge is shown as factor that limits the sludge incorporation in ceramic bodies, worsening the quality of the roof tiles. It is necessary the use of mixtures of different raw materials under point of view of the granulometry and of the other chemical and mineralogical properties for the obtaining of a satisfactory mass to the production of ceramic roof tiles

Efeito da adição de lodo de estação de tratamento de água (ETA) nas propriedades de material cerâmico estrutural

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evolução microestrutural da cerâmica KSr2Nb5O15 dopada com CuO:B2O3

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudos de sinterização da mistura de pós cerâmicos diatomita-titânia

This work is part of an effort of consolidation of a daily search for powder technology at the Department of Physics of the Universidade Federal do Rio Grande do Norte. This work objective the study and development of new ceramic materials from raw materials abundant at the region. For this, were studied ceramic mixtures of powders from diatomite-titania to aiming at a new ceramic material from powder technology. The experimental work involved a characterization of ceramic powders from a diatomite-titania mixture. The powders obtained were pressed and then parameters like variation of mass, linear shrinkage, activation energy and the mechanism of sintering are studied in function of the time and temperature of sintering, beyond microstructural analysis. The obtained results allow us estimate the optimizing of sintering conditions of this material

Estudo de propriedades elétricas em compostos de Bario

Este trabalho tem como objetivo estudar a influência da adição de diversos aditivos tais como óxido de silício (SiO2), óxido de bismuto (BiO2), óxido de cério (CeO2) e óxido de lantânio (La2O3) nas propriedades elétricas e dielétricas do titanato de bário (BaTiO3) policristalino. As amostras de titanato de bário foram compactadas e sinterizadas no Laboratório de Tecnologia dos Pós, do Departamento de Física da Universidade Federal do Rio Grande do Norte. Foram realizadas medidas de resistividade elétrica e constante dielétrica em função da temperatura, bem como ensaios de difração de raios-X e análise microestrutural através da microscopia eletrônica de varredura. A análise dos resultados permitiu avaliar a influência dos aditivos nas propriedades elétricas e dielétricas, e propor a utilização de cerâmicas eletrônicas a base de titanato de bário com propriedades superiores as do material existente atualmente

A produção das perdas dentárias: narrativas de usuários do SUS

For a complete comprehension of the effect of tooth loss is necessary to listen to the patients that have it. This study, of qualitative approach, investigate, in the dental history of users of SUS, listening to his/her experiences with the services of dental care, the reason that lead his/her to dental lost and the repercussion of this in his/her life. The collect of data was made by narrative interview, obeying to a pre-defined schema. The subjects interviewed were six (three of urban zone and three of rural zone), all of them were users of Family Health Units. The criterions of inclusion were the followings: the presence of tooth lost (total lost in both dental arch or in one of them, or partial lost in at least six elements in one of the arches); age between 25 and 59; male or female; to live in municipal district of São Tomé/RN or Natal/RN. Based on previous interviews was elaborated the odontological history of each patient. Such narratives, systemized in odontological history, were analyzed taking as base the studies of Souza71 and the proposal of Schutze, suggested for Jovchelovitch, Bauer34. The results show that toothache was the main reason for the search of odontological care. The patients confront the ache with home-made medicaments, allopathic ones, and searching for dental care. The searching for exodontics was stimulated for geographic access difficulties or for repressed demand, which as a result produced the aggravation of the lesions and the discredit in restoration s treatment. The self-care practice of tooth-brush with juá or toothpaste and the controlled ingestion of sugar was not sufficient to avoid dental lost. Guilty sentiments were identified in relation with lack of care with teeth. The acceptance of dental lost as a natural factor is an important motivation in lack of pain and in the belief that it was a simple part of life in old age. Life with dental prosthesis makes clear the difference between which was natural and which was unnatural, and difficulties with the prosthesis appeared. The limitation of the prosthesis in its functional aspect can be compensated by esthetic restitution, making possible smiling expression. Starting with this study and considering the high number of dental lost, mainly in low-rent population, which live with toothless limitations or bad-quality prosthesis which do not rehabilitate adequately, we suggested the realization of qualitative researches which include, also, another actors in heath care services such as professionals and administrators

Caracterização do processo de trabalho do cirurgiãodentista na estratégia de saúde da família do município de Parnamirim-RN

Family Health Strategy (FHS), founded in 1994 has appeared to play a strategic role in the SUS construction and consolidation. It has reaffirmed its Principles and Guidelines and has elected family as core of attention. The principle that has guided the work concerns the quality of the relationship between professional and family. Thus, the FHS has the family as a subject of health-disease process, and relations with its own characteristics and can be partners in building their health and improvement of quality of life of its members and the entire community. This study aims to characterize the surgeon-dentist (SD) working process in the family health strategy, from the knowledge of the SD integration with other team members; organization of services; development of shares, changes perceived by SDs, as well as knowing the surgeon-dentist profile who is part of this strategy. The collecting tool used was a semi-structured questionnaire, in which participated 30 professionals. As for profile, most professionals were women, completed the graduation in public university and did not have any training to work by joining the FHS. Almost all have other public or private working ties. They often carry out activities with students, and occasionally do home visits. In relation to team work, in activities such as home visits, school health, community activities, among others, they sometimes seek the cooperation of other members. The way of accessing for users in the most part has occurred through the schedule. The most frequently activities made to the Centro Especialidades Odontológicas (CEO), are in Endodontics and Prosthesis. The majority of them participate in team meetings, but they do not have frequency set to happen. As for the planning and programming of activities to be conducted, most said that individually develops them. Concerning the performance of their duties, most reported being satisfied, but that improvements could happen. Besides, they reported improvements in dental care following the inclusion of SD in the FHS in various aspects, such as access, organization, humanization, care and oral disease prevention. The professionals had poor integration with other team members, in addition to have a profile to more individualistic work, a fact seized by way of development and planning of actions. They work the actions in individual and curative way, in detriment promotion and collective ones. They work humanization, definition of territory and adscript population. Thus, it is concluded that the working process developed by SDs, includes the part which is advocated by FHS. This points out to a greater undertaking of this process aiming to detect the weakness met in order to reach the potential that the FHS represents in organization of basic attention

Comparação dos valores de desgaste abrasivo e de microdureza de 13 resinas compostas usadas em odontologia através do método do disco retificado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo das ligas titânio-zircônio resultantes do processo de fundição plasma-skull para aplicações como biomateriais

The aim of this work was to study a series of 11 different compositions of Ti-Zr binary alloys resistance to aggressive environment, i. e., their ability to keep their surface properties and mass when exposed to them as a way to evaluate their performance as biomaterials. The first stage was devoted to the fabrication of tablets from these alloys by Plasma-Skull casting method using a Discovery Plasma machine from EDG Equipamentos, Brazil. In a second stage, the chemical composition of each produced tablet was verified. In a third stage, the specimen were submitted to: as-cast microstructure analysis via optical and scanning electron microscopy (OM and SEM), x-ray dispersive system (EDS) chemical analysis via SEM, Vickers hardness tests for mechanical evaluation and corrosion resistence tests in a 0.9% NaCl solution to simulate exposition to human saliva monitored by open circuit potential and polarization curves. From the obtained results, it was possible to infer that specimens A1 (94,07 wt% Ti and 5,93% wt% Zr), A4 (77,81 wt % Ti and 22,19 wt % Zr) and A8 (27,83 wt% Ti and 72,17 wt% Zr), presented best performance regarding to corrosion resistance, homogeneity and hardness which are necessary issues for biomaterials to be applied as orthopedic and odontological prosthesis

Conhecimento sobre ergonomia no âmbito acadêmico: um estudo com alunos e professores de odontologia

OBJETIVO: As doenças osteomusculares são as afecções ocupacionais mais prevalentes em cirurgiões-dentistas. Nosso propósito: 1) investigar os conhecimentos, aplicabilidades clínicas dos princípios ergonômicos em discentes e docentes em atividades clínicas de uma universidade pública 2) pesquisar a incidência de sintomatologias dolorosas no pescoço, ombros, parte superior e inferior das costas, cotovelos, quadris, coxas, joelhos, tornozelos e pés no universo de alunos em estágios clínicos. 3) incitar discussões de normas e diretrizes ergonômicas na universidade. MÉTODOS: Esse estudo investigou o universo de alunos matriculados em disciplinas clínicas (148) e respectivos professores (30) do curso de odontologia da Universidade Federal do Rio Grande do Norte, Natal-RN a respeito dos princípios ergonômicos utilizados na rotina clínica. Paralelamente foi pesquisada a incidência de sintomatologia dolorosa nos alunos por intermédio do questionário nórdico e a partir dos resultados foi mensurado o índice de severidade dos sintomas em alunos. The Nordic Musculoskeletal Questionnaire (NMQ) é um instrumento de diagnóstico, proposto para padronizar a mensuração de relatos de sintomas osteomusculares. A análise dos dados foi através do programa SPSS-Statistical Package for the Social Sciences, versão 17.0 realizada analítica e descritivamente, com determinação das médias (x), desvio-padrão para variáveis quantitativas, freqüências simples e relativas para as variáveis categóricas, além da estatística de associação entre grupos (teste t) e a análise de associação do quiquadrado com nível de significância 5% entre as variáveis (Person). As respostas das questões abertas foram codificadas e transformadas em freqüências, descritas posteriormente. RESULTADOS: A aplicabilidade de medidas ergonômicas nas clínicas universitárias não foi evidenciada pelo universo de discentes e docentes. Quanto ao relato de sintomas osteomusculares o sexo feminino foi o mais acometido qualquer que seja o nível acadêmico cursado. As regiões anatômicas de maior grau de severidade de relatos dos sintomas foram: pescoço, parte inferior das costas, punhos, mãos e ombros, com significância etatística p<0,001. CONCLUSÃO: Em função dos achados os autores apresentam um protocolo de intervenção clínica baseado nos determinantes ergonômicos da Associação internacional de ergonomia (EAI) como medida de prevenção da saúde ocupacional dos futuros cirurgiões-dentistas ainda em processo de formação nas clínicas odontológicas das universidades.

Avaliação da eficiência da técnica de obturação pela compressão hidrùlica vertical após instrumentação automatizada

The purpose of this study was to evaluate through radiographic and microscopic analysis the efficiency of the filling techniques by vertical hidraulic compression after the root canal mechanical instrumentation in vitro as well to evaluate the marginal apical leakage through macroscopic and microscopic analysis. Thirty human mandibular molars were used , they were divided on three groups, these were subdivided on six subgroups with five specimens each, come down to 106 root canals filled. Initially, the teeth were instrumented with Profile system series 29 and filled with two ways: single accessory cone or single cone associated with gutta-percha secundary cone, with Fill Canal sealer or Sealer 26. Completed the filling, the teeth were coated with araldit and finger -nail polish except for the apical 2 mm and dried for 3 hours, thep radiographs were taken of the teeth in orto and disto-radiai directions. Next, the coronal seal was carried out with composite resin photopolymerized and with their process of making impermeable. Teeth of positive controls were used without araldit and finger-nail polish whereas the negative controls were used with total coat of araldit and finger-nail polish. The specimens were placed in 2% Methylene Blue dye for 24 hours and thermocycled for 7 days. Afterwards, sections were made of each tooth at mesial and distal roat, after this the teeth were radiographed at buccolíngual direction for a macroscopic analysis and at buccolingual and mesiodistal directions for assessment of the marginal apical leakage. Cross sections were made 3 mm to 3mm since the tooth apice. The sections obtained for each group were observed with a stereomicroscope to evaluate the quality of the root canal filling and the marginal apical leakage. The results showed that: In the four techniques the marginal dye leakage was present in the apical third; in all groups the quality of the root canal filling in the radiography was better at mesial root canal and the single cone technique showed inefficient when only a single distal root canal was present. In the radiographic evaluation the best quality of the root canal filling was observed in the 1A group (single accessory cone + FiIl Canal), as in the mesial root as in the distal root wich Shcwed twe root canals: when the distaI root had only one canal. the best result was showed by 28 group (single accessory cone associated with secundary cone + Fill Canal) In the macroscopic analysis of longitudinal !eaKage (outside surface). less leakage was showed as In the mesial root as in the distal root in the negative control group (3) followed 2A group (single accessory cone + Sealer 26). When the microscopic analysis of tranversal leakage of both roots (inside surface) was carried out. the groups that showed less dye leakage were the negative control (38) followed the 28 group (single acessory cone associated with secundary cone + Sealer 26). The homogeneity o filling was best noted in the 1 A group (.single accessoty cone + Fill Canal). The groups that showed less dye penetration in the tranversal leakage (total area) were negative control (3B) and 2B

Análises clínicas, radiográfica e microscópica de molares permanentes sem ou com lesão de cárie na superfície oclusal

O presente trabalho, objetivou avaliar comparativamente o diagnóstico clínico, radiógráfico e histológico de molares permanentes humanos sem ou com lesão de cárie na superfície oclusa!. Vinte e quatro dentes que estavam armazenados em formalina a 10% foram selecionados e em seguida submetidos a um exame clínico, através da inspeção visual, onde foram separados em 3 grupos: grupo 1 (G1), formado por dentes hígidos; grupo 2(G2), por dentes com pigmento na superfície oclusal e grupo 3(G3), aqueles com lesão de cárie na oclusal. Este exame foi realizado com auxílio de luz artificial proveniente de um refletor odontológico, sem qualquer manipulação da superfície. Para cada dente foram realizados duas tomadas radiográficas com e sem tela milimetrada, no sentido vestibulo lingual por um dos avaliadores, simulando uma radiografia interproximal, onde o feixe incidiu perpendicular ao longo eixo do dente. Em seguida os dentes foram preparados histomorfologicamente para coloração com hematoxilina e eosina e análise microscópica. Pela avaliação dos resultados a partir da amostra de 100%, foi possível concluir: 1) Os dentes clinicamente considerados hígidos (G1) apresentaram radiograficamente 74,99% de ausência de imagem radiolúcida e em 25% presença desta imagem na Junção Amelo¬dentinária e microscopicamente ausência de cárie em 100%; 2) os dentes que clinicamente apresentaram fissura pigmentada' (G2) notou-se em 33,33%, ausência da imagem radiolúcida e em 66,66% presente esta imagem na junção amelodentinária, 100% de ausência de cárie através da análise microscópica; 3) clinicamente, os dentes que apresentaram lesão de cárie (G3), radiograficamente foram comprovados 100% de imagem radiolúcida sugestiva de cárie e microscopicamente dos 100% destas, foram considerados cáries rasa (16,66%), média (61,10%) e profunda (22,22%) respectivamente

Síntese e caracterização de pós Ba(x)Sr(1-x)Co0,8Fe0,2O3- através do método de coprecipitação via oxalato

Ceramic powders based on oxides of perovskite-type structure is of fundamental interest nowadays, since they have important ionic-electronic conductivity in the use of materials with technological applications such as gas sensors, oxygen permeation membranes, catalysts and electrolytes for solid oxide fuel cells (SOFC). The main objective of the project is to develop nanostructured ceramic compounds quaternary-based oxide Barium (Br), Strontium (Sr), Cobalt (Co) and Iron (Fe). In this project were synthesized compounds BaxSr(1-x)Co0, 8Fe0,2O3- (x = 0.2, 0.5 and 0.8) through the oxalate co-precipitation method. The synthesized powders were characterized by thermogravimetric analysis and differential thermal analysis (TGADTA), X-ray diffraction (XRD) with the Rietveld refinement using the software MAUD and scanning electron microscopy (SEM). The results showed that the synthesis technique used was suitable for production of nanostructured ceramic solid solutions. The powders obtained had a crystalline phase with perovskite-type structure. The TGA-DTA results showed that the homogeneous phase of interest was obtained temperature above 1034°C. It was also observed that the heating rate of the calcination process did not affect the elimination of impurities present in the ceramic powder. The variation in the addition of barium dopant promoted changes in the average crystallite size in the nanometer range, the composition being BSCF(5582) obtained the lowest value (179.0nm). The results obtained by oxalate co-precipitation method were compared with those synthesis methods in solid state and EDTA-citrate method

O circuito espacial da indústria de cerâmica vermelha no seridó potiguar

This research has as an empirical universe, the productive territory of red ware in the Seridó region of Rio Grande do Norte. In the last years this territory has gone through a process of appropriation that has been substantially changing the environmental and social dynamism of the place. However, the industry of red ware has been focusing in some areas, mainly, in the county of Parelhas and Carnaúba dos Dantas. From this point of view, the aim of this work consists in analyze the use of these areas by the red ware industry and the transformations occurred with the expansion of the number of industries and the productivity raise, that requires bigger amounts of earthenware and wood, resources that are low in referred territory. As the result of this process, the suitable alternative has been to acquire inputs in other Rio Grande do Norte counties, as well as in Paraíba counties. To reach the proposed objective, the methodology of this work was consisted of bibliographic and empirical research, regarding the occupation that this activity covers in the Seridó region. From the information obtained during the research, it can be stated that the inputs to the production execution in the red ware industry are acquired in the geographic nearby lands. The analysis of the stages of the production(acquisition of raw material, production and commercialization) showed that the activity acts in a continuous area, having as principal consumer market other northeastern states and the state of Pará. The present study revealed that the pottery activity is set as untenable, because of non-stopping use of the argil and wood, resources that are vanishing from the area, which consume causes a many problems such as deforestation and erosion. Besides, the sale of productive lands for the red ware industries makes harder its good use by the familiar agriculturists in the development of agriculture and cattle raising activity, which for many times is the main economic activity of the place. The precariousness reveals in the constant accidents at work, that most of them are neglected by the local authorities, without any penalty to the industries. Therefore, the industry of red ware in Seridó uses the territory as a resource, leaving its environmental problems that my compromise the quality of life of the actual and future generations