The effect of work processes on the casing heat transfer of a transonic turbine

This paper considers the effect of the rotor tip on the casing heat load of a transonic axial flow turbine. The aim of the research is to understand the dominant causes of casing heat-transfer. Experimental measurements were conducted at engine-representative Mach number, Reynolds number and stage inlet to casing wall temperature ratio. Time-resolved heat-transfer coefficient and gas recovery temperature on the casing were measured using an array of heat-transfer gauges. Time-resolved static pressure on the casing wall was measured using Kulite pressure transducers. Time-resolved numerical simulations were undertaken to aid understanding of the mechanism responsible for casing heat load. The results show that between 35% and 60% axial chord the rotor tip-leakage flow is responsible for more than 50% of casing heat transfer. The effects of both gas recovery temperature and heat transfer coefficient were investigated separately and it is shown that an increased stagnation temperature in the rotor tip gap dominates casing heat-transfer. In the tip gap the stagnation temperature is shown to rise above that found at stage inlet (combustor exit) by as much as 35% of stage total temperature drop. The rise in stagnation temperature is caused by an isentropic work input to the tip-leakage fluid by the rotor. The size of this mechanism is investigated by computationally tracking fluid path-lines through the rotor tip gap to understand the unsteady work processes that occur. Copyright © 2005 by ASME.

Poverty in the fisheries, inductors, causes and intervention

The study is prompted by the poverty that persisted among the fishing communities of lake victoria at time of considerable cash inflow into the fisheries development of fish processing industry. There has been need for understanding of the poverty and what strategies would be most appreciate for it's reduction.This study has attempted to respond to the needby identifying the nature and distribution of the poverty within the fisheries lake victoria,Uganda, the factor responsible for itand the options for poverty reduction intervention. The study examined the global and regional perspectives of poverty and wealth distribution, noting that wide disparities existed between the developed and the developing world and also between the developing countries themselves. A historical review of development policies and strategies revealed that while successive strategies were able to contribute to growth, their achievement towards poverty alleviation were less than satisfactory, hence the need for continually developing new strategies. A background to Uganda’s society and economy is provided, examining the demographic, political, environmental and economic conditions of the country. Uganda’s development strategies are reviewed, highlighting the role of the Poverty Eradication Action Plan, Uganda’s main strategy for implementing the policy of poverty reduction and wealth distribution. At the agricultural sector level, the Plan for the Modernisation of Agriculture has been formulated, followed by the National Fisheries Policy, aimed at providing a policy framework for the management and development of the fisheries. An appropriate definition of poverty was formulated, considered relevant to the situation of Lake Victoria. The dimensions of poverty included inadequate basic necessities, low education and health achievements, a sense of insecurity and exposure to risk. The research methodology was enhanced by the examination of the Lélé Model of the Poverty–Environmental Degradation problem, the World Bank Model of Poverty Causation and the subsequent Lake Victoria Model developed in this study. It has provided a plan for the research, the consideration of criteria and a data collection plan. The data collection instruments included secondary data search, key informant interviews and a sample survey based on a structured questionnaire. The study identified all the four dimensions of poverty in the fisheries, provided poverty profiles with respect to the different activities, groups of people and regions in the fisheries, based on consumption poverty. Among the people identified to be in poverty were the fishing labourers, fishers of Oreochromis niloticus and those operating with non-powered boats. In the post-harvest fisheries, large proportions of processors involved in salting and sun-drying, market stall and bicycle traders were in the poverty category. The ethnic groups most affected included the Samia, Basoga and Bakenye while the Districts of Jinja, Bugiri and Busia had the highest proportions of fishers in the poverty category. With respect to the other dimensions of poverty, the study showed that educational achievement was low within the fishing communities. The health status was poor, due mainly to the prevalence of malaria, diarrhoea, bilharzia and HIV/AIDS. There was a sense of insecurity within certain sections of the fishing community, due to leadership weaknesses within the local as well as the Government institutions. Some community members operated in a state of risk because they were vulnerable to episodes of income, health and education. The causes of poverty in fisheries included weaknesses within the institutional and social environment, limitations in the technology available to the poor, resource degradation and unfavourable economic factors. The recommendations of the study for poverty reduction included strengthening of policies, developing links, improving capacities and increasing resources, to be applied at the levels of Central Government, Local Government and of the community. In view of the achievements of the methodology used on this study, involving reference to the models, it is recommended that future research should build upon this model approach, as it will continue to produce results, especially when attempting to forecast changes relating to interventions.

Do we know the strength of the chorioamnion? A critical review and analysis

The chorioamnion is the membrane that surrounds the fetus during gestation. Normally, it must remain intact for the duration of pregnancy, 37-42 weeks, and only rupture during or just before labour and delivery of the fetus. In a significant number (3%) of all births, this does not happen, and membranes rupture before term, resulting in preterm birth and significant perinatal morbidity. It is known that the material properties of chorioamnion may play a major role in mechanical rupture; a number of studies have been undertaken to characterise the physical nature of chorioamnion and examine factors that may predispose to rupture. However, the existing literature is inconsistent in its choice of both physical testing methods and data analysis techniques, motivating the current review. Experimental data from a large number of chorioamnion mechanical studies were collated, and data were converted to standard engineering quantities. The failure strength of the chorioamnion membrane was found consistently to value approximately 0.9 MPa. It is hoped that past and future studies of membrane mechanics can provide insight into the role of chorioamnion in labour and delivery. In addition, biomechanical approaches can help elucidate the potential causes of early rupture, and suggest future protocols or treatments that could both diagnose and prevent its occurrence. © 2009 Elsevier Ireland Ltd.

Studies on geo-morphology, ecology and fish production of the 92 rivers of Rajshahi Division, Bangladesh

Geo-morphology, ecology and fish production of the 92 rivers of Rajshahi division have been presented in this paper. Fifteen rivers are dead and 11 rivers have severe erosion problem. Siltation has increased in 66 rivers and depth has decreased in 11 rivers. Sixty nine rivers are suffering from low flow conditions. Fish diversity has decreased in 20 rivers while fish production has declined in 75 rivers. A total of 31 fish species have extinct, 25 species are under threat of extinction and 43 species have low production. Siltation and pollution are the major causes of fish habitat loss. Recommendations are made to protect and conserve fish habitat and riverine fisheries of Rajshahi division.

Studies on the probable sources of fungal infection and the control measures in a fish seed farm

The causes of mortality of fry of cultivable fishes in a fish seed farm were investigated. The mortality was due to fungal infection and the pathogen was Saprolegnia sp. The sources of infection were unhygienic breeding hapas, spawnery hapas in the cemented ponds, hatching jars and excess feeding. Application of one kg slaked lime followed by 75g of CuSo sub(4)(l-0.5 p.p.m.) and 150g of KMno sub(4)(2-1 p.p.m.) per each nursery (158m³ water) controlled the pathogen.

Polyculture of milkfish (Chanos chanos) and tiger prawn (Penaeus monodon Fab.) with and without supplemental feeding

Twelve 1,000 m super(2) earthen ponds were used to compare the growth rates, survival and production of milkfish (Chanos chanos)) and prawn (Penaeus monodon ) in monoculture and polyculture systems in shallow brackishwater ponds and without supplemental feeding. The low production and survival rates obtained were attributed to the lack of natural food; the high salinity during the first month of culture could be one of the causes of the high mortality of prawn observed in both mono and polyculture systems. Although the results of the trial were not ecouraging, it is possible that high yields may be obtained from the combination of the 2 species given enough natural food and favourable water conditions.

Occurrence of Zoothamnium sp. infection in Penaeus monodon (Fabricius, 1798) of the coastal shrimp culture ponds of Cox's Bazar Bangladesh

Penaeus monodon (Fabricius, 1798) is a popular cultivable species and valuable foreign exchange earning item among all the fishery commodities in Bangladesh. At present with semi-intensive and intensive shrimp culture practices, disease is a problem. Protozoan infection, caused by the Zoothamnium sp. is one of the causes of damage in the total production by growth retardation and mortality. No work has yet been done on shrimp disease in Bangladesh. The present account therefore, constitutes the first report on it from the shrimp culture ponds of Cox's Bazar. The present work includes the occurrence and prevalence of protozoan disease, its seasonal variations and level of infestation in different length groups in Penaeus monodon.

A decline in fish catches and the size of Oreochromis niloticus in Lake Wamala (Uganda) following human exploitation

The fishery of Lake Wamala has declined since the lake was stocked in 1956 and opened to fishing during the 1960s. Surveys were conducted on the lake during 1975/78 and 1988/92 to investigate the causes of declining fish catches. The lake produced an average of 4000 - 6000 tonnes of fish annually from 1960s through 1970s. Total fish catches decreased from a maximum of 7100 tonnes in 1967 to less than 500 tonnes by 1990s. Catch rates decreased from about 8 kg in the 1960s to less than 1 kg per net per night by 1975. During the 1970s the catch was dominated by Oreochromis niloticus (67%) followed by Clarias gariepinus (17%), and Protopterus aethiopicus (15.1 %). By 1990s the proportion of O. niloticus had decreased to 45.1% while that of P. aethiopicus had increased to 37.6%. These changes seem to have been caused by overfishing resulting from increased fishing effort from the recommended 250 to about 1000 boats and the additional increase in effort through driving fish into the nets by beating water. The maximum size of O. niloticus in the fishery decreased from 32 cm total length in 1975/78 to 22 cm in 1988/92 while the size at first maturity decreased from about 21 cm to 14 cm during the period. This has been concurrent with a shift in the mesh size of gillnet used from 127 mm (5") in 1960s to 64 mm by 1990s. Environmental changes, especially in lake level in 1980, may also have affected the fishery.

Movements of haplochromines (Pisces: Cichlidae) in Lake George, Uganda

In Lake George, the abundance of haplochromines in inshore regions during the day and at night differs significantly. Futhermore, while by day there are more haplochromines in the lower than the upper layers, at night these fishes appear to be uniformly distributed throught the water column. Regions of the lake near river mouths had fewer haplochromines during the wet than the dry season, while the reverse was true of regions distant form the river mouths. Possible causes of these movements are discussed.

Lakes Wamala and Kijanebalola: evaluation of the fisheries resources during July 1975

This report presents the results of the second (in 1975) fisheries resource survey for Lake Wamala conducted from 10th to 16th July 1975. The first similar survey covered the period 14th to 20th May 1975. The areas sampled consisted of the river-month areas, the papyrus-fringed inshore waters and the open dee offshore waters. In an effort to find the possible major causes of the decline in catch and seasonal disappearance of fish-hence a solution to the problem(s)-a second fisheries resource survey using multifilament nylon gillnets was conducted on Lake Kijanebalola during the period 17th to 21st July 1975. The first survey was similar and covered the period 21st to 27th May 1975.

Increasing the design strength of glass – fractography and stress testing

Brittleness is the unintended, but inevitable consequence of producing a transparent ceramic for architectural applications such as the soda-lime glass. Its tensile strength is particularly sensitive to surface imperfections, such as that from natural weathering and malicious damage. Although a significant amount of testing of new glass has been carried out, there has been surprisingly little testing on weathered glass. Due to the variable nature of the causes of surface damage, the lack of data on weathered glass leads to a considerable degree of uncertainty in the long-term strength of exposed glass. This paper presents the results of recent tests on weathered annealed glass which has been exposed to natural weathering for more than 20 years. The tests include experimental investigations using the co-axial ring setup as well as optical and atomic force microscopy of the glass surfaces. The experimental data from these tests is subsequently used to extend existing fracture mechanics-based models to predict the strength of weathered glass. It is shown that using an automated approach based directly on finite element analysis results can give an increase in effective design strength in the order of 70 to 100% when compared to maximum stress methods. It is also shown that by combining microscopy and strength test results, it is possible to quantitatively characterise the damage on glass surfaces.

Fast O2 measurement using modified UEGO sensors in the intake and exhaust of a diesel engine

Recent work has investigated the use of O2 concentration in the intake manifold as a control variable for diesel engines. It has been recognised as a very good indicator of NOX emissions especially during transient operation, however, much of the work is concentrated on estimating the O2 concentration as opposed to measuring it. This work investigates Universal Exhaust Gas Oxygen (UEGO) sensors and their potential to be used for such measurements. In previous work it was shown that these sensors can be operated in a controlled pressure environment such that their response time is of the order 10ms. In this paper, it is shown how the key causes of variation (and therefore potential sources of error) in sensor output, namely, pressure and temperature are largely mitigated by operating the sensors in such an environment. Experiments were undertaken on a representative light duty diesel engine using modified UEGO sensors in the intake and exhaust system. Results from other fast emissions measuring equipment are also shown and it is seen that the UEGO sensors are capable of giving an accurate measurement of O2 and EGR. Copyright © 2013 SAE International.

On the two classes of global primary modal instability in laminar separation bubbles

The self-excited global instability mechanisms existing in flat-plate laminar separation bubbles are studied here, in order to shed light on the causes of unsteadiness and three- dimensionality of unforced, nominally two-dimensional separated flows. The presence of two known linear global mechanisms, namely an oscillator behavior driven by local regions of absolute inflectional instability and a centrifugal instability giving rise to a steady three- dimensionalization of the bubble, is studied in a series of model separation bubbles. Present results indicate that absolute instability, and consequently a global oscillator behavior, does not exist for two-dimensional bubbles with a peak reversed-flow velocity below 12% of the free-stream velocity. However, the three-dimensional instability becomes active for recirculation levels as low as urev ≈ 7%. These findings suggest a route to the three-dimensionality and unsteadiness observed in experiments and simulations substantially different from that usually found in the literature, in which two-dimensional vortex shedding is followed by three-dimensionalization.

The use of non-dimensional parameters to study stress in lithiumion battery electrode storage particles

Mechanical degradation is thought to be one of the causes of capacity fade within Lithium-Ion batteries. In this work we develop a coupled stress-diffusion model for idealized spherical storage particles, which is analogous to the development of thermal strains. We then non-dimensionalize the model and identify three important parameters that control the development of stress within these particles. We can therefore use a wide number of values for these parameters to make predictions about the stress responses of different materials. The maximum stress developed within the particle for different values of these parameters are plotted as stress maps. A two dimensional model of a battery was then developed, in order to study the effect of particle morphology. Copyright © 2012 by ASME.

Temporal Coherence of Chlorophyll a during a Spring Phytoplankton Bloom in Xiangxi Bay of Three-Gorges Reservoir, China

Algal bloom phenomenon was defined as "the rapid growth of one or more phytoplankton species which leads to a rapid increase in the biomass of phytoplankton", yet most estimates of temporal coherence are based on yearly or monthly sampling frequencies and little is known of how synchrony varies among phytoplankton or of the causes of temporal coherence during spring algal bloom. In this study, data of chlorophyll a and related environmental parameters were weekly gathered at 15 sampling sites in Xiangxi Bay of Three-Gorges Reservoir (TGR, China) to evaluate patterns of temporal coherence for phytoplankton during spring bloom and test if spatial heterogeneity of nutrient and inorganic suspended particles within a single ecosystem influences synchrony of spring phytoplankton dynamics. There is a clear spatial and temporal variation in chlorophyll a across Xiangxi Bay. The degree of temporal coherence for chlorophyll a between pairs of sites located in Xiangxi Bay ranged from -0.367 to 0.952 with mean and median values of 0.349 and 0.321, respectively. Low levels of temporal coherence were often detected among the three stretches of the bay (Down reach, middle reach and upper reach), while high levels of temporal coherence were often found within the same reach of the bay. The relative difference of DIN between pair sites was the strong predictor of temporal coherence for chlorophyll a in down and middle reach of the bay, while the relative difference in Anorganic Suspended Solids was the important factor regulating temporal coherence in middle and upper reach. Contrary to many studies, these results illustrate that, in a small geographic area (a single reservoir bay of approximately 25 km), spatial heterogeneity influence synchrony of phytoplankton dynamics during spring bloom and local processes may override the effects of regional processes or dispersal.