Finding closest targets in non-oriented DEA models:the case of convex and non-convex technologies

This paper draws attention for the fact that traditional Data Envelopment Analysis (DEA) models do not provide the closest possible targets (or peers) to inefficient units, and presents a procedure to obtain such targets. It focuses on non-oriented efficiency measures (which assume that production units are able to control, and thus change, inputs and outputs simultaneously) both measured in relation to a Free Disposal Hull (FDH) technology and in relation to a convex technology. The approaches developed for finding close targets are applied to a sample of Portuguese bank branches.

Meeting technology needs of enterprises for national competitiveness

This paper addresses the question of how enterprises can improve their competitiveness through the acquisition and development of technology, and hence how countries are able to raise the level of industrial development and grow their GDP. It takes the example of East Asia to demonstrate how fast economic growth can be achieved through the 'stages' approach to technology acquisition and development. It also provides some case studies of technology transfer to China as a means of illustrating how successful transfer can be achieved and the problems that can be encountered. Finally, some comparisons are made with, and among, the Arab countries and an attempt is made to draw some lessons for the development of the Arab world from experiences gained elsewhere. Copyright © 2005 Inderscience Enterprises Ltd.

International technology collaboration for new product development

In recent years it has become increasingly common for companies to improve their competitiveness and find new markets by extending their operations through international new product development collaborations involving technology transfer. Technology development, cost reduction and market penetration are seen as the foci in such collaborative operations with the aim being to improve the competitive position of both partners. In this paper the case of technology transfer through collaborative new product development in the machine tool sector is used to provide a typical example of such partnerships. The research evidence on which the paper is based includes longitudinal case studies and questionnaire surveys of machine tool manufacturers in both countries. The specific case of a UK machine tool company and its Chinese partner is used to provide a specific example of the operational development of a successful collaboration. The paper concludes that a phased co-ordination of commercial, technical and strategic interactions between the two partners is essential for such collaborations to work. In particular, the need to transfer marketing know-how is emphasised, having been identified as an area of weakness among technology acquirers in China.

Techno-economic security aspects of transferring technology to China:the perspective of Danish companies

Danish companies are especially prevalent in China where they have found opportunities to exploit their niche position in a number of specialised product areas. As a result, their operations are often well advanced in terms of the levels of technology transferred and the extent of transfer. Transferring technology brings with it risks as well as benefits. Its absorption and dissemination can, in the longer term, bring about new competitors unless measures are taken to prevent leakage of know-how or the technology supplier can stay ahead of the technological race. This paper draws on data from three Danish case companies that are transferring technology to China. The cases are examined within a framework that allows the identification of the companies’ motivations for transfer against their awareness of the techno-economic security issues. In this way it is possible to highlight the strategic and operational approaches that can be taken to obviate the risks involved.

Introduction: improving manufacturing performance through technology diffusion, implementation and management

The role of technology management in achieving improved manufacturing performance has been receiving increased attention as enterprises are becoming more exposed to competition from around the world. In the modern market for manufactured goods the demand is now for more product variety, better quality, shorter delivery and greater flexibility, while the financial and environmental cost of resources has become an urgent concern to manufacturing managers. This issue of the International Journal of Technology Management addresses the question of how the diffusion, implementation and management of technology can improve the performance of manufacturing industries. The authors come from a large number of different countries and their contributions cover a wide range of topics within this general theme. Some papers are conceptual, others report on research carried out in a range of different industries including steel production, iron founding, electronics, robotics, machinery, precision engineering, metal working and motor manufacture. In some cases they describe situations in specific countries. Several are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the conference theme was 'Achieving Competitive Edge: Getting Ahead Through Technology and People'. The first two papers deal with questions of advanced manufacturing technology implementation and management. Firstly Beatty describes a three year longitudinal field study carried out in ten Canadian manufacturing companies using CADICAM and CIM systems. Her findings relate to speed of implementation, choice of system type, the role of individuals in implementation, organization and job design. This is followed by a paper by Bessant in which he argues that a more a strategic approach should be taken towards the management of technology in the 1990s and beyond. Also considered in this paper are the capabilities necessary in order to deploy advanced manufacturing technology as a strategic resource and the way such capabilities might be developed within the firm. These two papers, which deal largely with the implementation of hardware, are supplemented by Samson and Sohal's contribution in which they argue that a much wider perspective should be adopted based on a new approach to manufacturing strategy formulation. Technology transfer is the topic of the following two papers. Pohlen again takes the case of advanced manufacturing technology and reports on his research which considers the factors contributing to successful realisation of AMT transfer. The paper by Lee then provides a more detailed account of technology transfer in the foundry industry. Using a case study based on a firm which has implemented a number of transferred innovations a model is illustrated in which the 'performance gap' can be identified and closed. The diffusion of technology is addressed in the next two papers. In the first of these, by Lowe and Sim, the managerial technologies of 'Just in Time' and 'Manufacturing Resource Planning' (or MRP 11) are examined. A study is described from which a number of factors are found to influence the adoption process including, rate of diffusion and size. Dahlin then considers the case of a specific item of hardware technology, the industrial robot. Her paper reviews the history of robot diffusion since the early 1960s and then tries to predict how the industry will develop in the future. The following two papers deal with the future of manufacturing in a more general sense. The future implementation of advanced manufacturing technology is the subject explored by de Haan and Peters who describe the results of their Dutch Delphi forecasting study conducted among a panel of experts including scientists, consultants, users and suppliers of AMT. Busby and Fan then consider a type of organisational model, 'the extended manufacturing enterprise', which would represent a distinct alternative pure market-led and command structures by exploiting the shared knowledge of suppliers and customers. The three country-based papers consider some strategic issues relating manufacturing technology. In a paper based on investigations conducted in China He, Liff and Steward report their findings from strategy analyses carried out in the steel and watch industries with a view to assessing technology needs and organizational change requirements. This is followed by Tang and Nam's paper which examines the case of machinery industry in Korea and its emerging importance as a key sector in the Korean economy. In his paper which focuses on Venezuela, Ernst then considers the particular problem of how this country can address the problem of falling oil revenues. He sees manufacturing as being an important contributor to Venezuela's future economy and proposes a means whereby government and private enterprise can co-operate in development of the manufacturing sector. The last six papers all deal with specific topics relating to the management manufacturing. Firstly Youssef looks at the question of manufacturing flexibility, introducing and testing a conceptual model that relates computer based technologies flexibility. Dangerfield's paper which follows is based on research conducted in the steel industry. He considers the question of scale and proposes a modelling approach determining the plant configuration necessary to meet market demand. Engstrom presents the results of a detailed investigation into the need for reorganising material flow where group assembly of products has been adopted. Sherwood, Guerrier and Dale then report the findings of a study into the effectiveness of Quality Circle implementation. Stillwagon and Burns, consider how manufacturing competitiveness can be improved individual firms by describing how the application of 'human performance engineering' can be used to motivate individual performance as well as to integrate organizational goals. Finally Sohal, Lewis and Samson describe, using a case study example, how just-in-time control can be applied within the context of computer numerically controlled flexible machining lines. The papers in this issue of the International Journal of Technology Management cover a wide range of topics relating to the general question of improving manufacturing performance through the dissemination, implementation and management of technology. Although they differ markedly in content and approach, they have the collective aim addressing the concepts, principles and practices which provide a better understanding the technology of manufacturing and assist in achieving and maintaining a competitive edge.

Technology transfer and Chinese government policy:opportunities and implications for business

State-owned enterprises in China have been given greater autonomy and responsibility, have freer access to foreign technology, and are being encouraged to form groups to gain from rationalization and integration. This article uses case studies to identify the key strategic issues that affect the commercial viability of foreign technology acquisition by state-owned enterprises within the context of enterprise reforms. All the case study enterprises used technology transfer to develop new or improved products. Technologies acquired as parts of subcontracting arrangements and well-established technologies to produce end-use products are easier to manage and operate profitably. However, the latter type of technology has been imported by numerous enterprises and has led to fierce competition and industy restructuring. Importing capital-intensive and complex technology to produce major components for products, such as cars, is more difficult and requires closer coordination with customers and suppliers.

Offshoring:a multi-country study of FDI in high-technology sectors

This paper examines what is still a relatively new phenomenon in the literature, the outsourcing / offshoring of high technology manufacturing and services. This has become a concern for both policy makers and academics for two reasons. Firstly, policy makers have become concerned that the offshoring of high technology sectors in the West will follow the more labour intensive sectors, and move to lower cost locations. Secondly, international business theory has tended to view low costs, and high levels of indigenous technological development as being the two main drivers of location advantage in the attraction of FDI. We show that this may not be the case for offshored high technology manufacturing or services.

Articulating wider smartphone emerging security issues in the case of M-government in Turkey

For the last several years, mobile devices and platform security threats, including wireless networking technology, have been top security issues. A departure has occurred from automatic anti-virus software based on traditional PC defense: risk management (authentication and encryption), compliance, and disaster recovery following polymorphic viruses and malware as the primary activities within many organizations and government services alike. This chapter covers research in Turkey as a reflection of the current market – e-government started officially in 2008. This situation in an emerging country presents the current situation and resistances encountered while engaging with mobile and e-government interfaces. The authors contend that research is needed to understand more precisely security threats and most of all potential solutions for sustainable future intention to use m-government services. Finally, beyond m-government initiatives' success or failure, the mechanisms related to public administration mobile technical capacity building and security issues are discussed.

Perceptions of technological change : the attitude of managers towards group technology in the United States food equipment industry

In the center of today's continued and rapid technological change and ever competitive environment of the next millennium, manufacturers must realize that unless they are ready to consider and evaluate new technologies brought onto them, they may fail to adequately respond to the challenges that lie ahead of them. This research was designed to determine the consistency of the perceptions of technical and non-technical administrators, in manufacturing environment, towards technological change and group technology as an advanced manufacturing system. This research has included a review of literature with references to technological change, justification and implementation processes, and various manufacturing systems including group technology and its benefits. This research has used the research method of empirical analysis (quantitative) and case studies (qualitative) to research perceptions of technical and non-technical administrators towards technological change and group technology. Sixty-four (64) technical and fifty-one (51) nontechnical administrators from fifty (50) manufacturing organizations in the United States of America responded to the mail survey questionnaire used in this research. Responses were analyzed using the Repeated Measures ANOVA procedure to compare mean responses of each group. Two correlation analyses, Cronback Coefficient Alpha and Pearson Correlation Coefficient, were also performed to determine the reliability of the questionnaire as well as the degree of correlation of perceptions between these two groups. This research, through the empirical analysis, has found that perceptions of the technical and non-technical administrators towards group technology were not consistent. In other words, they did not perceive the benefits of group technology in the same manner to the overall organizational performance. This finding was significant since it provided the first clear and comprehensive view of the technical and non-technical administrators' perception towards group technology and technological change, in Food Equipment Manufacturer Industry, in United States of America. In addition, a number of cases were analyzed and the results have supported those of the quantitative analysis. Therefore, this research not only has provided basic data, which was unavailable prior to this investigation, but it also provided a basis for future studies.

Process orientation and information technology:customer engagement at Xerox (UK) Ltd

Xerox Customer Engagement activity is informed by the "Go To Market" strategy, and "Intelligent Coverage" sales philosophy. The realisation of this philosophy necessitates a sophisticated level of Market Understanding, and the effective integration of the direct channels of Customer Engagement. Sophisticated Market Understanding requires the mapping and coding of the entire UK market at the DMU (Decision Making Unit) level, which in turn enables the creation of tailored coverage prescriptions. Effective Channel Integration is made possible by the organisation of Customer Engagement work according to a single, process defined structure: the Selling Process. Organising by process facilitates the discipline of Task Substitution, which leads logically to creation of Hybrid Selling models. Productive Customer Engagement requires Selling Process specialisation by industry sector, customer segment and product group. The research shows that Xerox's Market Database (MDB) plays a central role in delivering the Go To Market strategic aims. It is a tool for knowledge based selling, enables productive SFA (Sales Force Automation) and, in sum, is critical to the efficient and effective deployment of Customer Engagement resources. Intelligent Coverage is not possible without the MDB. Analysis of the case evidence has resulted in the definition of 60 idiographic statements. These statements are about how Xerox organise and manage three direct channels of Customer Engagement: Face to Face, Telebusiness and Ebusiness. Xerox is shown to employ a process-oriented, IT-enabled, holistic approach to Customer Engagement productivity. The significance of the research is that it represents a detailed (perhaps unequalled) level of rich description of the interplay between IT and a holistic, process-oriented management philosophy.

An Investigation into the adoption and implementation of computer aided production management systems:using the Rogers model of adoption and implementation and a social constuctionist account of technology

The research investigates the processes of adoption and implementation, by organisations, of computer aided production management systems (CAPM). It is organised around two different theoretical perspectives. The first part is informed by the Rogers model of the diffusion, adoption and implementation of innovations, and the second part by a social constructionist approach to technology. Rogers' work is critically evaluated and a model of adoption and implementation is distilled from it and applied to a set of empirical case studies. In the light of the case study data, strengths and weaknesses of the model are identified. It is argued that the model is too rational and linear to provide an adequate explanation of adoption processes. It is useful for understanding processes of implementation but requires further development. The model is not able to adequately encompass complex computer based technologies. However, the idea of 'reinvention' is identified as Roger's key concept but it needs to be conceptually extended. Both Roger's model and definition of CAPM found in the literature from production engineering tend to treat CAPM in objectivist terms. The problems with this view are addressed through a review of the literature on the sociology of technology, and it is argued that a social constructionist approach offers a more useful framework for understanding CAPM, its nature, adoption, implementation, and use. CAPM it is argued, must be understood on terms of the ways in which it is constituted in discourse, as part of a 'struggle for meaning' on the part of academics, professional engineers, suppliers, and users.

Technical entrepreneurship in the UK:an examination of the relationship between the previous occupational background of the technical entrepreneur and the management of the small technology-based venture

With the growing appreciation of the contribution of small technology-based ventures to a healthy economy, an analysis of the individual who initiates and manages such ventures - the technical entrepreneur - is highly desirable, predominantly because of the influence of such an individual on the management and future strategy of the venture. An examination of recent research has indicated that a study of the previous experience and expertise of the entrepreneur, gained in previous occupations, may be highly relevant in determining the possible success of a new venture. This is particularly true where the specific expertise of the entrepreneur forms the main strategic advantage of the business, as in the case of small technology-based firms. Despite this, there has been very little research which has attempted to examine the relationship between the previous occupational background of the technical entrepreneur, and the management of the small technology-based firm. This thesis will examine this relationship, as well as providing an original contribution to the study of technical entrepreneurship in the UK. Consequently, the exploratory nature of the research prompted an inductive qualitative approach being adopted for the thesis. Through a two stage, multiple-site research approach, an examination was made of technical entrepreneurs heading award-winning technology-based small firms in the UK. The main research questions focused on management within the firm, the novelty and origin of the technology adopted, and the personal characteristics of the entrepreneur under study. The results of this study led to the creation of a specific typology for technical entrepreneurs, based on the individual's role in the development of technology within his previous occupation.

University-industry-relations - their role in technological innovation:the case of biotechnology in the UK

Biotechnology is one of a series of new `generic technologies' that have been identified by western governments as possessing stategic economic opportunities. In this thesis I examine the characteristics of the technology and the government policies that have been developed to both promote and exploit the underpinning scientific research for biotechnology. The approach I have taken involves an in-depth analysis of the role of university-industry research relations in the development of biotechnology. To this end I carried out a detailed survey of biotechnology companies in the UK on the nature of their interactions and objectives. Through individual case studies of the SERC and DTI club mechanisms in biotechnology, I provide a contemporary appraisal of the development of new mechanisms involving co-ordination and cooperation between industry, government and academia, established to couple state funded science and national economic development. The public policy implications of the club funding systems for science in the UK are examined.

Testing incremental politics : the case of North Sea oil

In the quest to secure the much vaunted benefits of North Sea oil, highly non-incremental technologies have been adopted. Nowhere is this more the case than with the early fields of the central and northern North Sea. By focusing on the inflexible nature of North Sea hardware, in such fields, this thesis examines the problems that this sort of technology might pose for policy making. More particularly, the following issues are raised. First, the implications of non-incremental technical change for the successful conduct of oil policy is raised. Here, the focus is on the micro-economic performance of the first generation of North Sea oil fields and the manner in which this relates to government policy. Secondly, the question is posed as to whether there were more flexible, perhaps more incremental policy alternatives open to the decision makers. Conclusions drawn relate to the degree to which non-incremental shifts in policy permit decision makers to achieve their objectives at relatively low cost. To discover cases where non-incremental policy making has led to success in this way, would be to falsify the thesis that decision makers are best served by employing incremental politics as an approach to complex problem solving.

Buyer-supplier relationships in advanced manufacturing technology acquisition and implementation : a study in Malaysia

This thesis reports the results of research into the connections between transaction attributes and buyer-supplier relationships (BSR) in advanced manufacturing technology (AMT) acquisitions and implementation. It also examines the impact of the different patterns of BSR on performance. Specifically, it addresses the issues of how the three transaction attributes; namely level of complexity, level of asset specificity, and level of uncertainty, can affect the relationships between the technology buyer and suppler in AMT acquisition and implementation, and then to see the impact of different patterns of BSR on the two aspect of performance; namely technology and implementation performance. In understanding the pohenomena, the study mainly draws on and integrates the literature of transaction cost economics theory,buyer-supplier relationships and advanced manufacturing technology as a basis of theoretical framework and hypotheses development.data were gathered through a questionnaire survey with 147 responses and seven semi-structured interviews of manufacturing firms in Malaysia. Quantitative data were analysed mainly using the AMOS (Analysis of Moment Structure) package for structural equation modeling and SPSS (Statistical Package for Social Science) for analysis of variance (ANOVA). Data from interview sessions were used to develop a case study with the intention of providing a richer and deeper understanding on the subject under investigation and to offer triangulation in the research process. he results of the questionnaire survey indicate that the higher the level of technological specificity and uncertainty, the more firms are likely to engage in a closer relationship with technology suppliers.However, the complexity of the technology being implemented is associated with BSR only because it is associated with the level of uncertainty that has direct impact upon BSR.The analysis also provides strong support for the premise that developing strong BSR could lead to an improved performance. However, with high levels of transaction attribute, implementation performance suffers more when firms have weak relationships with technology suppliers than with moderate and low levels of transaction attributes. The implications of the study are offered for both the academic and practitioner audience. The thesis closes with reports on its limitations and suggestions for further research that would address some of these limitations.