965 resultados para Borralha Mines
Resumo:
Neste trabalho foram estudadas cinzas de carvão do tipo sílico-aluminosas e sulfatadas. As primeiras são aquelas obtidas normalmente pela queima do carvão acima de 850 °C. As cinzas sulfatadas estudadas são aquelas obtidas pela combustão, a 850 °C, do carvão em presença de calcário o qual retém o enxofre, liberado na combustão, na forma de anidrita (CaSO4). As cinzas sulfatadas foram classificadas de acordo com as misturas que as deram origem em “sulfocalcíticas”, “sulfodolomíticas” e “sulfocalcocauliníticas”. Estas cinzas foram obtidas, respectivamente, da combustão de misturas de carvão e calcita, de carvão e dolomita e de carvão, calcita e caulim. Os minerais estudados provêm do Rio Grande do Sul e todas análises foram efetuadas na École des Mines d’Alés (França). Assim, se estudaram cinzas de carvão, de calcário (calcítico e dolomítico), de caulim e de misturas destes a fim correlacionar as cinzas obtidas aos minerais que as deram origem. A reconstrução mineralógica destes materiais foi possível graças ao cruzamento de várias técnicas de análise tais como: método dos ajustes dosados, difração e fluorescência de raios X, determinação da perda ao fogo, densidade, calcimetria, termogravimetria, microscopia ótica e eletrônica etc. O carvão de Candiota é constituído por uma fase amorfa (52 %), quartzo (20 %), caulinita (16 %), muscovita (8 %), pirita (3 %), dolomita (1 %) e hematita (< 1 %). O caulim apresenta caulinita (80,6 %), muscovita (9,8 %), albita (6,8 %) e hematita (1,2 %) O calcário dolomítico possui calcita (42,8 %), antigorita (34,1 %), magnesita (11,7 %), dolomita (10,7 %), flogopita (3 %), caulinita (1,8 %) e quartzo (0,7 %). O calcário calcítico contém calcita (86,1 %), dolomita (12,2 %), quartzo (3,6 %), caulinita (0,7 %) e muscovita (0,4 %). As cinzas “sílico-aluminosas” são compostas por hematita e sílica. As cinzas sulfatadas são compostas por muscovita, quartzo, anidrita, guelenita, cal e hematita. As cinzas “sulfodolomíticas” apresentam, além destas fases, a periclasita. Foram realizados alguns ensaios de hidratação com cinzas “sílico-aluminosas”, “sulfocalcíticas” e “sulfocalcocauliníticas”. Após 28 dias de hidratação as cinzas “sílicoaluminosas” não sofreram alterações e a difração de raios X evidenciou, principalmente, o quartzo e a hematita. As cinzas sulfatadas com apenas 2 dias de hidratação, ou seja, antes do período de “pega” do cimento, apresentaram a formação de silicatos de cálcio hidratados (CSH) e etringita (primária). Estes dois compostos melhoram as propriedades mecânicas das cinzas. Após 28 dias de hidratação a etringita desapareceu em favor da formação da gipsita e de mais silicatos de cálcio hidratados. Os resultados mostraram que as cinzas sulfatadas têm propriedades físicas; superfície (específica, Blaine, BET), volume poroso e índice de aglomeração; e químicas; CSH e etringita; mais interessantes que as cinzas sílico-aluminosas. Os resultados indicam que as cinza sulfatadas têm um grande potencial de aproveitamento.
Resumo:
Guias para exploração mineral são normalmente baseados em modelos conceituais de depósitos. Esses guias são, normalmente, baseados na experiência dos geólogos, em dados descritivos e em dados genéticos. Modelamentos numéricos, probabilísticos e não probabilísticos, para estimar a ocorrência de depósitos minerais é um novo procedimento que vem a cada dia aumentando sua utilização e aceitação pela comunidade geológica. Essa tese utiliza recentes metodologias para a geração de mapas de favorablidade mineral. A denominada Ilha Cristalina de Rivera, uma janela erosional da Bacia do Paraná, situada na porção norte do Uruguai, foi escolhida como estudo de caso para a aplicação das metodologias. A construção dos mapas de favorabilidade mineral foi feita com base nos seguintes tipos de dados, informações e resultados de prospecção: 1) imagens orbitais; 2) prospecção geoquimica; 3) prospecção aerogeofísica; 4) mapeamento geo-estrutural e 5) altimetria. Essas informacões foram selecionadas e processadas com base em um modelo de depósito mineral (modelo conceitual), desenvolvido com base na Mina de Ouro San Gregorio. O modelo conceitual (modelo San Gregorio), incluiu características descritivas e genéticas da Mina San Gregorio, a qual abrange os elementos característicos significativos das demais ocorrências minerais conhecidas na Ilha Cristalina de Rivera. A geração dos mapas de favorabilidade mineral envolveu a construção de um banco de dados, o processamento dos dados, e a integração dos dados. As etapas de construção e processamento dos dados, compreenderam a coleta, a seleção e o tratamento dos dados de maneira a constituírem os denominados Planos de Informação. Esses Planos de Informação foram gerados e processados organizadamente em agrupamentos, de modo a constituírem os Fatores de Integração para o mapeamento de favorabilidade mineral na Ilha Cristalina de Rivera. Os dados foram integrados por meio da utilização de duas diferentes metodologias: 1) Pesos de Evidência (dirigida pelos dados) e 2) Lógica Difusa (dirigida pelo conhecimento). Os mapas de favorabilidade mineral resultantes da implementação das duas metodologias de integração foram primeiramente analisados e interpretados de maneira individual. Após foi feita uma análise comparativa entre os resultados. As duas metodologias xxiv obtiveram sucesso em identificar, como áreas de alta favorabilidade, as áreas mineralizadas conhecidas, além de outras áreas ainda não trabalhadas. Os mapas de favorabilidade mineral resultantes das duas metodologias mostraram-se coincidentes em relação as áreas de mais alta favorabilidade. A metodologia Pesos de Evidência apresentou o mapa de favorabilidade mineral mais conservador em termos de extensão areal, porém mais otimista em termos de valores de favorabilidade em comparação aos mapas de favorabilidade mineral resultantes da implementação da metodologia Lógica Difusa. Novos alvos para exploração mineral foram identificados e deverão ser objeto de investigação em detalhe.
Resumo:
Nos últimos anos, a indústria elétrica brasileira passou, basicamente, por duas reestruturações setoriais, implantadas segundo políticas e ideologias divergentes, mas que convergiram para o mesmo objetivo final: a busca por investimentos privados para dar suporte à expansão do sistema. Esse é o grande desafio do novo modelo institucional de 2004, que surge em um ambiente conturbado, de forte percepção de riscos e incertezas. A própria instabilidade regulatória é a grande responsável pelo recuo e ponderação na hora de investir. Contudo, a pergunta que se faz na presente pesquisa objetiva identificar os fatores motivadores da nova reestruturação setorial. Só assim, pode-se correlacionar os fatos do passado com a recente reforma, identificando possíveis deficiências e fatores críticos de sucesso. Para tanto, o presente estudo recorreu à literatura existente, assim como a entrevistas semi-estruturadas com especialistas do setor elétrico brasileiro. Os dados foram analisados qualitativamente, por meio de categorias estabelecidas a posteriori, buscando-se aceitar ou refutar suposições. As evidências sugerem que, apesar de a nova reforma institucional ter realizado avanços, ao introduzir mecanismos absorvidos, principalmente, a partir das experiências regulatórias dos últimos anos, dificuldades ainda permanecem e devem ser enfrentadas, especialmente no que tange à mitigação dos riscos ambientais e regulatórios, este último, percebido com maior intensidade a partir de 2004. Sendo assim, cabe ao governo federal, representado pelo Ministério de Minas e Energia (MME), conseguir atrair investimentos e proporcionar estabilidade regulatória, a fim de afastar o “fantasma” do racionamento.
Resumo:
Esta dissertação pretende ser uma abordagem empírica para testar a validade de um modelo matemático para avaliação de comportamentos proposto por Ziviani (1974), quanto ao seu emprego para avaliar e quantificar respostas a questões de múltipla escolha, tendo como critério o modelo tradicional da psicometria clássica. É portanto, um estudo comparativo entre os resultados (escores) obtidos através deste modelo, por um lado, e através do método tradicional, em termos da dicotomia certo-errado, por outro. Visa mostrar como as variações no instrumento de medida (teste) ou instrumentos de medida com características diferentes determinam variações nos escores fornecidos pelos dois modelos e que estes escores são tanto mais equivalentes quanto "melhor" for o teste a que se referem.
Resumo:
Este trabalho minera as informações coletadas no processo de vestibular entre 2009 e 2012 para o curso de graduação de administração de empresas da FGV-EAESP, para estimar classificadores capazes de calcular a probabilidade de um novo aluno ter bom desempenho. O processo de KDD (Knowledge Discovery in Database) desenvolvido por Fayyad et al. (1996a) é a base da metodologia adotada e os classificadores serão estimados utilizando duas ferramentas matemáticas. A primeira é a regressão logística, muito usada por instituições financeiras para avaliar se um cliente será capaz de honrar com seus pagamentos e a segunda é a rede Bayesiana, proveniente do campo de inteligência artificial. Este estudo mostre que os dois modelos possuem o mesmo poder discriminatório, gerando resultados semelhantes. Além disso, as informações que influenciam a probabilidade de o aluno ter bom desempenho são a sua idade no ano de ingresso, a quantidade de vezes que ele prestou vestibular da FGV/EAESP antes de ser aprovado, a região do Brasil de onde é proveniente e as notas das provas de matemática fase 01 e fase 02, inglês, ciências humanas e redação. Aparentemente o grau de formação dos pais e o grau de decisão do aluno em estudar na FGV/EAESP não influenciam nessa probabilidade.
Resumo:
Purpose – This case study presents an impact assessment of Corporate Social Responsibility (CSR) programs of the TFM Company in order to understand how they contribute to the sustainable development of communities in areas in which they operate. Design/Methodology/Approach - Data for this study was collected using qualitative data methods that included semi-structured interviews and Focus Group Discussions most of them audio and video recorded. Documentary analysis and a field visit were also undertaken for the purpose of quality analysis of the CSR programs on the terrain. Data collected was analyzed using the Seven Questions to sustainability (7Qs) framework, an evaluation tool developed by the Mining, Minerals and Sustainable Development (MMSD) North America chapter. Content analysis method was on the other hand used to examine the interviews and FGDs of the study participants. Findings - Results shows that CSR programs of TFM SA do contribute to community development, as there have been notable changes in the communities’ living conditions. But whether they have contributed to sustainable development is not yet the case as programs that enhance the capacity of communities and other stakeholders to support these projects development beyond the implementation stage and the mines operation lifetime need to be considered and implemented. Originality/Value – In DRC, there is paucity of information of research studies that focus on impact assessment of CSR programs in general and specifically those of mining companies and their contribution to sustainable development of local communities. Many of the available studies cover issues of minerals and conflict or conflict minerals as mostly referred to. This study addressees this gap.
Resumo:
The progress of a nation is closely linked to the energy supply that it has to develop its economic capabilities. The dependence of contemporary society for energy requires the continued expansion of the use of renewable energy, and implies coordinated action of the Democratic State in the delimitation of the best ways to make full use of energy. In periods of rapid development, countries need an increment of energy supplies superior to those of periods of regular economic growth. Energy demand generated by the condition of Brazil as an emerging country reveals the need for orderly expansion of energy supply. In reverse, lack of energy planning effectively paralyzes a country and generates incalculable losses in national socioeconomic development. The Brazilian Constitution abandoned the notion of development tied to the simple increase in the gross domestic product. The respect for the environment, sovereignty, national development, and especially the constant and growing supply of energy, promotes the advancement of national economic agents, and quenches the simple accounting increase in energy supply. Constitutional principles condition the rational use of energy potentials, in ensuring adequate supply of energy for the entire national territory. The Brazilian Ministry of Mines and Energy, through its agencies, government offices and companies, establishes and formulates policies and guidelines for energy in Brazil, playing an important role in national energy planning. National development is enhanced by the good performance of the state agencies responsible for planning the energy sector
Resumo:
The purpose of this dissertation is whether the demand for manpower trained in technical school for the sector of Oil and Gas (O&G) is in balance with the offer of that training in the Brazilian education system. The methodology used to obtain such information was based on School Census 2000 and 2008 where data were worked out in order to clarify the numbers of enrollments in secondary technical level demanded by the sector of O&G. The demand for manpower with that qualification as a data source was the 2010-2014 Business Plan Program for Mobilization of the National Oil and Natural Gas (PROMINP). This Program identified the future demand for manpower for the Sector of the O&G until 2014 where the occupational categories are mapped prerequisite training and experience. In order to better understand the object of this study was dome a review of the literature with regard to technical education in Brazil but also the importance of the education to economic growth and the peculiarities of the oil economy in different countries possessors of those mines, or that is, developed and underdeveloped countries. Analysis showed that enrollment in technical education in Brazil had a significant increase between the dates 2000 and 2008. It also don´t bring balance with the characteristic of the dynamics of the productive sectors of the economy mainly due to heating of the economy before the global growth especially in the Construction Industry as well as in the Oil and Natural Gas Engineering and a Naval account of the discovery of oil in the Pre-Salt. Another important aspect is that one of the major problems of qualification of manpower in Brazil is due to a bad quality of the student´s school and high school which makes difficult a good performance in office work and also this ability to learn new functions. The rapprochement between the supply of the education system and the demand for manpower with training mid-level technical support for the sector O&G showed that most technical courses demanded or had no enrollment in 2008, had few enrollment in 15 states with demand expect to occur and those enrollment were unevenly distributed among states. The analysis therefore signalize the needed of a public policy that enables the adequacy of the education system (Secondary Technical Education) to Sector of O&G in terms of enrollment and its distribution between the oil producing states and in relation to technical expertise offered
Resumo:
The semiconductor technologies evolutions leads devices to be developed with higher processing capability. Thus, those components have been used widely in more fields. Many industrial environment such as: oils, mines, automotives and hospitals are frequently using those devices on theirs process. Those industries activities are direct related to environment and health safe. So, it is quite important that those systems have extra safe features yield more reliability, safe and availability. The reference model eOSI that will be presented by this work is aimed to allow the development of systems under a new view perspective which can improve and make simpler the choice of strategies for fault tolerant. As a way to validate the model na architecture FPGA-based was developed.
Resumo:
The production of the red pottery brick, made traditionally with clay, is a technique that is already stabled. However, in spite of the little complexity that involves the conventional process of these bricks production, it are exposed to many problems that begin in the fase of exploration of the mines, the problems get worse because of the lack of the clay's characterization, and they continue through the steps of the dough preparation, conformation of the products, the drying and the burning process. The wastefulness is shown and so is the low quality of the material produced. Among other factors, the high use of energy in the burning makes the cost of this material inaccessible to the low income consumer. Besides this, the destruction of the environment around the mines and the use of native vegetation to produce wood - the most used fuel in the pottery industry - make serious environmental damage. The production technique of a new type of simple brick (adobe), that has low cost and no environmental damage, can be the viable altemative to lower the cost of this part of the civil construction, and, consequently, in the building of cheaper houses. In this paper, the results of the mechanical resistance of the adobe brick are shown, using in its composition, clay, natural vegetable fibers, cement and plaster in a process that is completely handcrafted and manual. It is intented to make clear that are possible alternatives to be put in practice, with the simple process, using "raw earth" that has been used in the construction of houses in thousands of years, trying to solve these severe problems. Analysis and tests were performed to find results that could prove the possibility of the utilization of this kind of material. Other studies are in progress, and the new researches are necessary to enrich this work, but it stays the certainty that there is potential to produce bricks from adobe, as an alternative that has low cost to civil construction
Resumo:
Considering that the Jesuitical tradition which Father Samuel Fritz belonged, has a clear political and institutional dimension that reveals itself in the missionary initiative placed since the Trento Council, his journal is a experience story as missionary at Maynás region during the period from 1686 until 1725. In his narrative, a series of data related to the conquer of Amazonia, conflicts among the Iberic Kingdoms and french, dutches and british, transformation of culture and space close the period of the Madrid Deal. I´ll explore the men and space relationship, in this case, the missionary in his special practice, therefore an effective and geometrical politic for border control was only applied at 1750 with reformist governments and that Amazônia was, until now, an object of autonomous initiatives, not being until now a priority focused state politics action like the ones in the central regions (silver mines) and that the missionary action of Samuel Fritz represented ant that moment represented the most important border advance to the Spanish Kingdom, coinciding with the end of the borders previously set in Madrid and Santo Idelfonso, I´ll put the question of how and with which politics the experience of Fritz in Maynás could represent an advance about Amazônia space. Then I´ll approach the problem about three aspects that are chapters: The first one was focused to the Iberic Kingdoms atlantic politics and the internal geopolitical relationships they created as the centre and the border emerging a new order; in the second chapter I studied the special transformation cause by the encounter and conflicts between the Indian and European order generating a new organization; in the third chapter I´ll examined the political border of the state and the emergency of the missionary body as an institution, with the tradition and missionary action as support, or not, to the exploration of the east border of Spanish America influencing the delimitation process of the border between Portugal and Spain
Resumo:
This study was developed in the northern coast of the city of Macau, a total area of 88,52 km², located in the State of Rio Grande do Norte. It presents relatively plain surface, with interlaced of streams and gamboas, characterized by contributions of oceanic water, flooding areas of swamps. Altogether, the climatic and topographical conditions provide an ideal environment for the development of saline activity. Inserted in the geologic context of the Potiguar Basin, the region presents favorable conditions for the production of hydro-carbons. It still presents natural conditions for shrimp breeding and artisanal fishing. This work analyzes the transformations occurred in the land use, using air photographs of 1978, Landsat 5 ETM Images of 1988, 1998 and 2008. A secular analyzes was carried through the dynamics of the use of the territory and the transformations occurred in the landscape due to the increment of the productive activities. In the survey of the data for study of the area, it was verified that little alteration occurred in the 30 years. The saline activity that was present since the year of 1978 having an increase of about 5% in thirty years; the shrimp breeding activity that had its presence in the decade of 1990, presented a high growth in the land use, therefore in 1998 it presented 0.45% and currently it presents 6.59%. In the field it was observed that great areas used previously for the saline activity, today it is prepared for shrimp breeding and that the areas of petroleum exploration occupy salt mines, beaches and trays. In 1988 it presented a percentage of 0, 07% and currently it occupies 0.46%, having grown 50% in the last 10 years. Although the variation of the occupation of the area has been little expressive, shrimp breeding showed a growth of 1,200% in only 10 years. In regards to petroleum activity, there wasn t any demonstration of an increasing impact in the land use in the area of study in 26 years of exploration
Resumo:
Complete albinism is a rare phenomenon that occurs in all vertebrate groups. In bats, albinism has been recorded in several species but this information has not previously been reviewed in detail nor has there been an analysis of its importance. In this study, cases of albinism from the literature are checked and new cases are presented. Complete albinism in bats is documented in eight families, 38 species, and at least 64 individuals (47.4% female female and 52.6% males; n = 38). of these, 39 individuals were observed and/or captured in sheltered roosts, such as caves (51.3%), mines and galleries (20.5%), buildings (17.9%), and hollow-trees and bird boxes (7.7%). Only one albino bat (2.6%) was captured in an external roost (foliage). This individual is the fruit bat, Artibeus planirostris, which is recorded here for the first time. Information on four additional cases of albino individuals of the common vampire bat, Desmodus rotundus, is also presented. It is suggested that sheltered roosts favour survival of albino bars, offering protection against sunlight, water loss, and visually hunting predators.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Ore mines installed in the lower-middle portion of Ribeira de Iguape River (São Paulo State, southeastern Brazil), together with the Panelas Plant are responsible for the contamination of the Iguape-Cananeia-Paranagua lagoon-estuarine complex. The lower-middle portion of Grande Creek Basin, located in the district of Adrianopolis (Parana State, southern Brazil) is under environmental impact because of mining activities. The mines of Perau, at Perau Creek, Canoas at Canoas Creek, and Barrinha at Barrinha Creek and Laranjal Creek have been paralyzed. The transport of lead in fluvial sediments is mainly associated with organic matter, carbonates, the residual fraction, and adsorbables, whereas the transport of zinc is associated with the organic and residual fraction, oxides and hydroxides of iron and manganese, carbonate, and adsorbables. The transport of copper is associated with the residual fraction and oxides and hydroxides of iron and manganese, organic matter, carbonate, and adsorbables.