899 resultados para Ball-cratering
Resumo:
Ball rotating micro-abrasion tribometers are commonly used to carry out wear tests on thin hard coatings. In these tests, different kinds of abrasives were used, as alumina (Al2O3), silicon carbide (SiC) or diamond. In each kind of abrasive, several particle sizes can be used. Some studies were developed in order to evaluate the influence of the abrasive particle shape in the micro-abrasion process. Nevertheless, the particle size was not well correlated with the material removed amount and wear mechanisms. In this work, slurry of SiC abrasive in distilled water was used, with three different particles size. Initial surface topography was accessed by atomic force microscopy (AFM). Coating hardness measurements were performed with a micro-hardness tester. In order to evaluate the wear behaviour, a TiAlSiN thin hard film was used. The micro-abrasion tests were carried out with some different durations. The abrasive effect of the SiC particles was observed by scanning electron microscopy (SEM) both in the films (hard material) as in the substrate (soft material), after coating perforation. Wear grooves and removed material rate were compared and discussed.
Resumo:
The injection process of glass fibres reinforced plastics promotes the moulds surface degradation by erosion. In order to improve its wear resistance, several kinds of PVD thin hard coatings were used. It is well-known that nanostructures present a better compromise between hardness and toughness. Indeed, when the coating is constituted by a large number of ultra-thin different layers, cracks and interface troubles tend to decrease. However, it is not clear that these nanostructures present a better wear behaviour in erosion processes. In order to study its wear behaviour, a sputtered PVD nanostructured TiAlCrSiN coating was used. The substrate and film surfaces topography were analyzed by profilometry and atomic force microscopy techniques. Film adhesion to the substrate was evaluated by scratch tests. The surface hardness was measured with a Vickers micro-hardness tester. The wear resistance was evaluated by micro-abrasion with a rotating ball tribometer tests. Slurry of SiC particles in distilled water was used in order to provoke the surface abrasion. Different duration tests were performed in order to analyze the wear evolution. After these tests, the wear mechanisms developed were analyzed by scanning electron microscopy. Wear craters were measured and the wear rate was calculated and discussed. With the same purpose, coated inserts were mounted in an injection mould working with a 30% glass fibres reinforced polypropylene. After 45 000 cycles no relevant wear was registered.
Resumo:
The minimization of the power loss and the use of the biodegradable greases have attracting considerable attention. To compare the energetic performance of biodegradable lubricant greases, power loss tests were performed on a modified four-ball machine. A correlation between the grease formulation and rheology was established with its energetic performance
Resumo:
Six cases of a cavitary pulmonary ball formed by Actinomycetes are reported. They were observed in the state of Bahia, Brazil. All patients complained of cough and hemoptysis and the pathological study showed bronchiectasis and small cavities in the lungs. The lesions contained micro-colonies of Actinomyces, identified by morphology, staining properties and culture in two cases (thioglycolate media). In the six patients the disease was limited to the lungs. In one patient grains were found, within micro-abscesses in the surrounding parenchyma. Probably the invasion occurred due to ulceration of bronchial mucosa that was covered by granulation tissue. The author suggests that as in nocardiosis actinomycosys may have an invasive form, a saprophytic one may and colonize pulmonary cavities.
Resumo:
Mestrado em Engenharia Geotécnica e Geoambiente
Resumo:
Two cases of Chronic Pulmonary Histoplasmosis are reported and other eleven cases, collected from Brazilian literature, are commented. After being clinically cured, one of our patients presented an Aspergillus fungus ball inside a cavitation in the wall of which H. capsulatum was disclosed. Comments are also done on the diagnosis of the mycosis
Resumo:
Four cases of respiratory tract intracavitary colonization (fungus ball) due to Scedosporium apiospermum (teleomorph, Pseudallescheria boydii) are reported. The need for a careful search for anneloconidia, in order to establish the etiologic diagnosis in the clinical specimen by microscopy, is emphasized.
Resumo:
A compreensão do conceito de OPA é essencial de forma a entender o funcionamento das combinações empresariais. Esta dissertação tem dois objetivos. O primeiro objetivo tem a finalidade de perceber quais as estratégias defensivas mais eficazes em contexto de OPA. Foi através de um inquérito realizado a 192 empresas envolvidas em situação de OPA entre os anos 1991 e 2014. Através dos resultados das 14 respostas destaca-se que a Recompra de Ações é a estratégia defensiva mais utilizada, tanto em situações de defesas pré-proposta e pós-proposta. A defesa consegue evitar o sucesso, da proposta efetuada pela empresa adquirente, em mais de metade das situações em que é utilizada, tendo sido classificada como muito eficaz. 5 das operações foram de cariz hostil e 7 delas eram expectáveis pela Gestão. Em nenhuma das operações se verificou contraoperação e as áreas mais prejudicadas, pela iniciativa de OPA, foram as respeitantes ao tempo, Time-consuming, e estratégicas. O segundo objetivo tenta perceber o comportamento dos retornos médios anormais das empresas envolvidas numa OPA em face do respetivo anúncio preliminar. Seguiram-se as metodologias de Ball & Brown (1968) e Beaver (1968). Identificaram-se 100 operações compreendidas entre os anos 2000 e 2014. Através do resultado das 12 operações analisadas confirma-se que as empresas-alvo apresentam um retorno médio anormal superior ao das empresas adquirentes e que têm a tendência de acumular retornos médios anormais positivos, pelo contrário as empresas adquirentes têm a tendência de acumular retornos médios anormais negativos. Globalmente, as empresas reagem fortemente ao anúncio preliminar e apresentam uma tendência de ganho nos períodos circundantes e não-circundantes.
Resumo:
A PhD Dissertation, presented as part of the requirements for the Degree of Doctor of Philosophy from the NOVA - School of Business and Economics
Resumo:
Dissertation presented the Ph.D degree in Biology
Resumo:
In this work, a volumetric unit previously assembled by the research group was upgraded. This unit revamping was necessary due to the malfunction of the solenoid valves employed in the original experimental setup, which were not sealing the gas properly leading to erroneous adsorption equilibrium measurements. Therefore, the solenoid valves were substituted by manual ball valves. After the volumetric unit improvement its operation was validated. For this purpose, the adsorption equilibrium of carbon dioxide (CO2) at 323K and 0 - 20 bar was measured on two different activated carbon samples, in the of extrudates (ANG6) and of a honeycomb monolith (ACHM). The adsorption equilibrium results were compared with data previously measured by the research group, using a high-pressure microbalance from Rubotherm GmbH (Germany) – gravimetric. The results obtained using both apparatuses are coincident thus validating the good operation of the volumetric unit upgraded in this work. Furthermore, the adsorption equilibrium of CO2 at 303K and 0 - 10 bar on Metal-Organic Frameworks (MOFs) Cu-BTC and Fe-BTC was also studied. The CO2 adsorption equilibrium results for both MOFs were compared with the literature results showing good agreement, which confirms the good quality of the experimental results obtained in the new volumetric unit. Cu-BTC sample showed significantly higher CO2 adsorption capacity when compared with the Fe-BTC sample. The revamping of the volumetric unit included a new valve configuration in order to allow testing an alternative method for the measurement of adsorption equilibrium. This new method was employed to measure the adsorption equilibrium of CO2 on ANG6 and ACHM at 303, 323 and 353K within 0-10 bar. The good quality of the obtained experimental data was testified by comparison with data previously obtained by the research group in a gravimetric apparatus.
Resumo:
The purpose of this thesis is to study the impact of a port strike on companies that perform as logistic service providers in a supply chain (SC), here denominated 3PL (third-party logistic providers). These companies are highly dependent on ports to perform their activity, since they provide international services. Consequently, a disruption in a port can seriously impair their business. A stevedores’ strike is one of the possible disruptions that can affect ports. This study aims to analyze the negative effects caused by this disruption, and what strategies 3PLs may implement in order to keep their performance levels stable and have a quick recovery time. Within this objective, the first step will be to establish a theoretical context about the maritime port’s sector and 3PLs in a SC context, to then expand the concept of a resilient SC, and finally to develop a theoretical framework in order to better contextualize the case study. Subsequently, the impact of a port strike will be quantified by using a case study comprising three companies, covering the areas of land and sea distribution and port operations. Information from primary sources was assembled in two phases: first via e-mail and, in a second phase, through a personal interview. The information from secondary sources was obtained through television news, internet and conferences, enabling its cross-analysis. Finally, by analyzing the collected data, it will be possible to draw conclusions about the measures carried out by each company to minimize the negative effects of the strike, thus contributing to a more resilient SC. As a conclusion, a stevedores’ strike will create a snow-ball of negative effects in the SC, degrading all relevant KPIs (key performance indicators) of the 3PLs under study. No mitigation and contingency strategies available proved really effective to reduce the negative effects of a port strike disruption.
Resumo:
Um dos fenómenos com que o especialista ou simples interessado na Baixa Idade Média europeia mais frequentemente se depara é, sem dúvida, a caracterização desse século XIV que a voz abalizada de Duby crismaria de “viragem” (Duby 1989: 173) como marcado pela instabilidade, precaridade e incerteza próprias de todo um mundo composto de mudança. Respigando ao acaso algumas obras produzidas pela historiografia inglesa, esperam-nos etiquetas e descrições como Hierarchy and Revolt (Holmes 1975), 2 “Order and Conflict” (Briggs 1985: 82), The Age of Adversity (Lerner 1968), An Age of Ambition (Du Boulay 1970), “the century of war, plague and disorder” (McDowall 1995: 43), etc. Elucidativo é também o subtítulo de um romance histórico de Barbara Tuchman: A Distant Mirror. The Calamitous Fourteenth Century (Tuchman 1980). Descontando o que nesta representação possa existir ou subsistir de subjectivo ou convencional, o século XIV foi, ainda assim, dentro e fora de Inglaterra, um período de profundas tensões, convulsões e mutações de ordem demográfica, económica, social, laboral, política e religiosa; fustigado pela Peste Negra (1348-49), por insurreições populares como a Jacquerie (1358), os Ciompi (1378), os Maillotins (1382) ou a Revolta dos Camponeses (1381), por cisões religiosas e teológicas como o Grande Cisma do Ocidente (1378-1417) e o aparecimento dos lollards, a partir da década de 1370.
Resumo:
Relatório de estágio de mestrado em Ensino de Educação Física nos Ensinos Básico e Secundário
Resumo:
Tese de Doutoramento Engenharia Têxtil.