Structural and mean level analyses of the Five-Factor Model and Locus of Control: Further evidence from Africa

The present study examines the Five-Factor Model (FFM) of personality and locus of control in French-speaking samples in Burkina Faso (N = 470) and Switzerland (Ns = 1,090, 361), using the Revised NEO Personality Inventory (NEO-PI-R) and Levenson's Internality, Powerful others, and Chance (IPC) scales. Alpha reliabilities were consistently lower in Burkina Faso, but the factor structure of the NEO-PI-R was replicated in both cultures. The intended three-factor structure of the IPC could not be replicated, although a two-factor solution was replicable across the two samples. Although scalar equivalence has not been demonstrated, mean level comparisons showed the hypothesized effects for most of the five factors and locus of control; Burkinabè scored higher in Neuroticism than anticipated. Findings from this African sample generally replicate earlier results from Asian and Western cultures, and are consistent with a biologically-based theory of personality.

Neuroplasticity of inhibitory control

Executive control refers to a set of abilities enabling us to plan, control and implement our behavior to rapidly and flexibly adapt to environmental requirements. These adaptations notably involve the suppression of intended or ongoing cognitive or motor processes, a skill referred to as "inhibitory control". To implement efficient executive control of behavior, one must monitor our performance following errors to adjust our behavior accordingly. Deficits in inhibitory control have been associated with the emergènce of a wide range of psychiatric disorders, ranging from drug addiction to attention deficit/hyperactivity disorders. Inhibitory control deficits could, however, be remediated- The brain has indeed the amazing possibility to reorganize following training to allow for behavioral improvements. This mechanism is referred to as neural and behavioral plasticity. Here, our aim is to investigate training-induced plasticity in inhibitory control and propose a model of inhibitory control explaining the spatio- temporal brain mechanisms supporting inhibitory control processes and their plasticity. In the two studies entitled "Brain dynamics underlying training-induced improvement in suppressing inappropriate action" (Manuel et al., 2010) and "Training-induced neuroplastic reinforcement óf top-down inhibitory control" (Manuel et al., 2012c), we investigated the neurophysiological and behavioral changes induced by inhibitory control training with two different tasks and populations of healthy participants. We report that different inhibitory control training developed either automatic/bottom-up inhibition in parietal areas or reinforced controlled/top-down inhibitory control in frontal brain regions. We discuss the results of both studies in the light of a model of fronto-basal inhibition processes. In "Spatio-temporal brain dynamics mediating post-error behavioral adjustments" (Manuel et al., 2012a), we investigated how error detection modulates the processing of following stimuli and in turn impact behavior. We showed that during early integration of stimuli, the activity of prefrontal and parietal areas is modulated according to previous performance and impacts the post-error behavioral adjustments. We discuss these results in terms of a shift from an automatic to a controlled form of inhibition induced by the detection of errors, which in turn influenced response speed. In "Inter- and intra-hemispheric dissociations in ideomotor apraxia: a large-scale lesion- symptom mapping study in subacute brain-damaged patients" (Manuel et al., 2012b), we investigated ideomotor apraxia, a deficit in performing pantomime gestures of object use, and identified the anatomical correlates of distinct ideomotor apraxia error types in 150 subacute brain-damaged patients. Our results reveal a left intra-hemispheric dissociation for different pantomime error types, but with an unspecific role for inferior frontal areas. Les fonctions exécutives désignent un ensemble de processus nous permettant de planifier et contrôler notre comportement afin de nous adapter de manière rapide et flexible à l'environnement. L'une des manières de s'adapter consiste à arrêter un processus cognitif ou moteur en cours ; le contrôle de l'inhibition. Afin que le contrôle exécutif soit optimal il est nécessaire d'ajuster notre comportement après avoir fait des erreurs. Les déficits du contrôle de l'inhibition sont à l'origine de divers troubles psychiatriques tels que l'addiction à la drogue ou les déficits d'attention et d'hyperactivité. De tels déficits pourraient être réhabilités. En effet, le cerveau a l'incroyable capacité de se réorganiser après un entraînement et ainsi engendrer des améliorations comportementales. Ce mécanisme s'appelle la plasticité neuronale et comportementale. Ici, notre but èst d'étudier la plasticité du contrôle de l'inhibition après un bref entraînement et de proposer un modèle du contrôle de l'inhibition qui permette d'expliquer les mécanismes cérébraux spatiaux-temporels sous-tendant l'amélioration du contrôle de l'inhibition et de leur plasticité. Dans les deux études intitulées "Brain dynamics underlying training-induced improvement in suppressing inappropriate action" (Manuel et al., 2010) et "Training-induced neuroplastic reinforcement of top-down inhibitory control" (Manuel et al., 2012c), nous nous sommes intéressés aux changements neurophysiologiques et comportementaux liés à un entraînement du contrôle de l'inhibition. Pour ce faire, nous avons étudié l'inhibition à l'aide de deux différentes tâches et deux populations de sujets sains. Nous avons démontré que différents entraînements pouvaient soit développer une inhibition automatique/bottom-up dans les aires pariétales soit renforcer une inhibition contrôlée/top-down dans les aires frontales. Nous discutons ces résultats dans le contexte du modèle fronto-basal du contrôle de l'inhibition. Dans "Spatio-temporal brain dynamics mediating post-error behavioral adjustments" (Manuel et al., 2012a), nous avons investigué comment la détection d'erreurs influençait le traitement du prochain stimulus et comment elle agissait sur le comportement post-erreur. Nous avons montré que pendant l'intégration précoce des stimuli, l'activité des aires préfrontales et pariétales était modulée en fonction de la performance précédente et avait un impact sur les ajustements post-erreur. Nous proposons que la détection d'erreur ait induit un « shift » d'un mode d'inhibition automatique à un mode contrôlé qui a à son tour influencé le temps de réponse. Dans "Inter- and intra-hemispheric dissociations in ideomotor apraxia: a large-scale lesion-symptom mapping study in subacute brain-damaged patients" (Manuel et al., 2012b), nous avons examiné l'apraxie idémotrice, une incapacité à exécuter des gestes d'utilisation d'objets, chez 150 patients cérébro-lésés. Nous avons mis en avant une dissociation intra-hémisphérique pour différents types d'erreurs avec un rôle non spécifique pour les aires frontales inférieures.

Rational Partisan Theory with fiscal policy and an independent central bank

The empirical evidence testing the validity of the rational partisan theory (RPT) has been mixed. In this article, we argue that the inclusion of other macroeconomic policies and the presence of an independent central bank can partly contribute to explain this inconclusiveness. This article expands Alesina s (1987) RPT model to include an extra policy and an independent central bank. With these extensions, the implications of RPT are altered signi ficantly. In particular, when the central bank is more concerned about output than public spending (an assumption made by many papers in this literature), then the direct relationship between in flation and output derived in Alesina (1987) never holds. Keywords: central bank, conservativeness, political uncertainty. JEL Classi fication: E58, E63.

Automatic low baseline stereo in urban areas

In this work we propose a new automatic methodology for computing accurate digital elevation models (DEMs) in urban environments from low baseline stereo pairs that shall be available in the future from a new kind of earth observation satellite. This setting makes both views of the scene similarly, thus avoiding occlusions and illumination changes, which are the main disadvantages of the commonly accepted large-baseline configuration. There still remain two crucial technological challenges: (i) precisely estimating DEMs with strong discontinuities and (ii) providing a statistically proven result, automatically. The first one is solved here by a piecewise affine representation that is well adapted to man-made landscapes, whereas the application of computational Gestalt theory introduces reliability and automation. In fact this theory allows us to reduce the number of parameters to be adjusted, and tocontrol the number of false detections. This leads to the selection of a suitable segmentation into affine regions (whenever possible) by a novel and completely automatic perceptual grouping method. It also allows us to discriminate e.g. vegetation-dominated regions, where such an affine model does not apply anda more classical correlation technique should be preferred. In addition we propose here an extension of the classical ”quantized” Gestalt theory to continuous measurements, thus combining its reliability with the precision of variational robust estimation and fine interpolation methods that are necessary in the low baseline case. Such an extension is very general and will be useful for many other applications as well.

The automatic selection of ventilation parameters during the initial phase of mechanical ventilation.

OBJECTIVE: To test a method that allows automatic set-up of the ventilator controls at the onset of ventilation. DESIGN: Prospective randomized crossover study. SETTING: ICUs in one adult and one children's hospital in Switzerland. PATIENTS: Thirty intubated stable, critically ill patients (20 adults and 10 children). INTERVENTIONS: The patients were ventilated during two 20-min periods using a modified Hamilton AMADEUS ventilator. During the control period the ventilator settings were chosen immediately prior to the study. During the other period individual settings were automatically determined by the ventilatior (AutoInit). MEASUREMENTS AND RESULTS: Pressure, flow, and instantaneous CO2 concentration were measured at the airway opening. From these measurements, series dead space (V(DS)), expiratory time constant (RC), tidal volume (VT, total respiratory frequency (f(tot), minute ventilation (MV), and maximal and mean airway pressure (Paw, max and Paw, mean) were calculated. Arterial blood gases were analyzed at the end of each period. Paw, max was significantly less with the AutoInit ventilator settings while f(tot) was significantly greater (P < 0.05). The other values were not statistically significant. CONCLUSIONS: The AutoInit ventilator settings, which were automatically derived, were acceptable for all patients for a period of 20 min and were not found to be inferior to the control ventilator settings. This makes the AutoInit method potentially useful as an automatic start-up procedure for mechanical ventilation.

TECTONICS OF THE HELVETIC NAPPE SYSTEM (W SWITZERLAND): CONTROL OF STRAIN LOCALIZATION AND BASEMENT-COVER DEFORMATION. Insights from models based on continuum mechanics

The Helvetic nappe system in Western Switzerland is a stack of fold nappes and thrust sheets em-placed at low grade metamorphism. Fold nappes and thrust sheets are also some of the most common features in orogens. Fold nappes are kilometer scaled recumbent folds which feature a weakly deformed normal limb and an intensely deformed overturned limb. Thrust sheets on the other hand are characterized by the absence of overturned limb and can be defined as almost rigid blocks of crust that are displaced sub-horizontally over up to several tens of kilometers. The Morcles and Doldenhom nappe are classic examples of fold nappes and constitute the so-called infra-Helvetic complex in Western and Central Switzerland, respectively. This complex is overridden by thrust sheets such as the Diablerets and Wildhörn nappes in Western Switzerland. One of the most famous example of thrust sheets worldwide is the Glariis thrust sheet in Central Switzerland which features over 35 kilometers of thrusting which are accommodated by a ~1 m thick shear zone. Since the works of the early Alpine geologist such as Heim and Lugeon, the knowledge of these nappes has been steadily refined and today the geometry and kinematics of the Helvetic nappe system is generally agreed upon. However, despite the extensive knowledge we have today of the kinematics of fold nappes and thrust sheets, the mechanical process leading to the emplacement of these nappe is still poorly understood. For a long time geologist were facing the so-called 'mechanical paradox' which arises from the fact that a block of rock several kilometers high and tens of kilometers long (i.e. nappe) would break internally rather than start moving on a low angle plane. Several solutions were proposed to solve this apparent paradox. Certainly the most successful is the theory of critical wedges (e.g. Chappie 1978; Dahlen, 1984). In this theory the orogen is considered as a whole and this change of scale allows thrust sheet like structures to form while being consistent with mechanics. However this theoiy is intricately linked to brittle rheology and fold nappes, which are inherently ductile structures, cannot be created in these models. When considering the problem of nappe emplacement from the perspective of ductile rheology the problem of strain localization arises. The aim of this thesis was to develop and apply models based on continuum mechanics and integrating heat transfer to understand the emplacement of nappes. Models were solved either analytically or numerically. In the first two papers of this thesis we derived a simple model which describes channel flow in a homogeneous material with temperature dependent viscosity. We applied this model to the Morcles fold nappe and to several kilometer-scale shear zones worldwide. In the last paper we zoomed out and studied the tectonics of (i) ductile and (ii) visco-elasto-plastic and temperature dependent wedges. In this last paper we focused on the relationship between basement and cover deformation. We demonstrated that during the compression of a ductile passive margin both fold nappes and thrust sheets can develop and that these apparently different structures constitute two end-members of a single structure (i.e. nappe). The transition from fold nappe to thrust sheet is to first order controlled by the deformation of the basement. -- Le système des nappes helvétiques en Suisse occidentale est un empilement de nappes de plis et de nappes de charriage qui se sont mis en place à faible grade métamorphique. Les nappes de plis et les nappes de charriage sont parmi les objets géologiques les plus communs dans les orogènes. Les nappes de plis sont des plis couchés d'échelle kilométrique caractérisés par un flanc normal faiblement défor-mé, au contraire de leur flanc inverse, intensément déformé. Les nappes de charriage, à l'inverse se caractérisent par l'absence d'un flanc inverse bien défini. Elles peuvent être définies comme des blocs de croûte terrestre qui se déplacent de manière presque rigide qui sont déplacés sub-horizontalement jusqu'à plusieurs dizaines de kilomètres. La nappe de Mordes et la nappe du Doldenhorn sont des exemples classiques de nappes de plis et constitue le complexe infra-helvétique en Suisse occidentale et centrale, respectivement. Ce complexe repose sous des nappes de charriages telles les nappes des Diablerets et du Widlhörn en Suisse occidentale. La nappe du Glariis en Suisse centrale se distingue par un déplacement de plus de 35 kilomètres qui s'est effectué à la faveur d'une zone de cisaillement basale épaisse de seulement 1 mètre. Aujourd'hui la géométrie et la cinématique des nappes alpines fait l'objet d'un consensus général. Malgré cela, les processus mécaniques par lesquels ces nappes se sont mises en place restent mal compris. Pendant toute la première moitié du vingtième siècle les géologues les géologues ont été confrontés au «paradoxe mécanique». Celui-ci survient du fait qu'un bloc de roche haut de plusieurs kilomètres et long de plusieurs dizaines de kilomètres (i.e., une nappe) se fracturera de l'intérieur plutôt que de se déplacer sur une surface frictionnelle. Plusieurs solutions ont été proposées pour contourner cet apparent paradoxe. La solution la plus populaire est la théorie des prismes d'accrétion critiques (par exemple Chappie, 1978 ; Dahlen, 1984). Dans le cadre de cette théorie l'orogène est considéré dans son ensemble et ce simple changement d'échelle solutionne le paradoxe mécanique (la fracturation interne de l'orogène correspond aux nappes). Cette théorie est étroitement lié à la rhéologie cassante et par conséquent des nappes de plis ne peuvent pas créer au sein d'un prisme critique. Le but de cette thèse était de développer et d'appliquer des modèles basés sur la théorie de la méca-nique des milieux continus et sur les transferts de chaleur pour comprendre l'emplacement des nappes. Ces modèles ont été solutionnés de manière analytique ou numérique. Dans les deux premiers articles présentés dans ce mémoire nous avons dérivé un modèle d'écoulement dans un chenal d'un matériel homogène dont la viscosité dépend de la température. Nous avons appliqué ce modèle à la nappe de Mordes et à plusieurs zone de cisaillement d'échelle kilométrique provenant de différents orogènes a travers le monde. Dans le dernier article nous avons considéré le problème à l'échelle de l'orogène et avons étudié la tectonique de prismes (i) ductiles, et (ii) visco-élasto-plastiques en considérant les transferts de chaleur. Nous avons démontré que durant la compression d'une marge passive ductile, a la fois des nappes de plis et des nappes de charriages peuvent se développer. Nous avons aussi démontré que nappes de plis et de charriages sont deux cas extrêmes d'une même structure (i.e. nappe) La transition entre le développement d'une nappe de pli ou d'une nappe de charriage est contrôlé au premier ordre par la déformation du socle. -- Le système des nappes helvétiques en Suisse occidentale est un emblement de nappes de plis et de nappes de chaînage qui se sont mis en place à faible grade métamoiphique. Les nappes de plis et les nappes de charriage sont parmi les objets géologiques les plus communs dans les orogènes. Les nappes de plis sont des plis couchés d'échelle kilométrique caractérisés par un flanc normal faiblement déformé, au contraire de leur flanc inverse, intensément déformé. Les nappes de charriage, à l'inverse se caractérisent par l'absence d'un flanc inverse bien défini. Elles peuvent être définies comme des blocs de croûte terrestre qui se déplacent de manière presque rigide qui sont déplacés sub-horizontalement jusqu'à plusieurs dizaines de kilomètres. La nappe de Morcles and la nappe du Doldenhorn sont des exemples classiques de nappes de plis et constitue le complexe infra-helvétique en Suisse occidentale et centrale, respectivement. Ce complexe repose sous des nappes de charriages telles les nappes des Diablerets et du Widlhörn en Suisse occidentale. La nappe du Glarüs en Suisse centrale est certainement l'exemple de nappe de charriage le plus célèbre au monde. Elle se distingue par un déplacement de plus de 35 kilomètres qui s'est effectué à la faveur d'une zone de cisaillement basale épaisse de seulement 1 mètre. La géométrie et la cinématique des nappes alpines fait l'objet d'un consensus général parmi les géologues. Au contraire les processus physiques par lesquels ces nappes sont mises en place reste mal compris. Les sédiments qui forment les nappes alpines se sont déposés à l'ère secondaire et à l'ère tertiaire sur le socle de la marge européenne qui a été étiré durant l'ouverture de l'océan Téthys. Lors de la fermeture de la Téthys, qui donnera naissance aux Alpes, le socle et les sédiments de la marge européenne ont été déformés pour former les nappes alpines. Le but de cette thèse était de développer et d'appliquer des modèles basés sur la théorie de la mécanique des milieux continus et sur les transferts de chaleur pour comprendre l'emplacement des nappes. Ces modèles ont été solutionnés de manière analytique ou numérique. Dans les deux premiers articles présentés dans ce mémoire nous nous sommes intéressés à la localisation de la déformation à l'échelle d'une nappe. Nous avons appliqué le modèle développé à la nappe de Morcles et à plusieurs zones de cisaillement provenant de différents orogènes à travers le monde. Dans le dernier article nous avons étudié la relation entre la déformation du socle et la défonnation des sédiments. Nous avons démontré que nappe de plis et nappes de charriages constituent les cas extrêmes d'un continuum. La transition entre nappe de pli et nappe de charriage est intrinsèquement lié à la déformation du socle sur lequel les sédiments reposent.

The control of hypertension in men and women: a comparative analysis

Abstract OBJECTIVE To compare men and women who have hypertension with reference to the following: high blood pressure, biosocial variables, habits and life styles, mental disorders, and social support networks. METHOD 290 hypertensive patients (women, 62.1%) were evaluated. The assessments involved the following: measuring blood pressure with an automatic measuring device, evaluating social status through the Social Support Scale, and the use of a Self-Report Questionnaire (SRQ-20) to identify common mental disorders. A value of p<0.05 was considered statistically significant. RESULTS Women were found to be different to men (p<0.05) in the following areas having: better control of their blood pressure (64.4% vs 52.7%), less salary incomes, less diabetes, higher total cholesterol, higher body mass index and wider abdominal circumferences. They also had lower systolic blood pressure, lower levels of alcohol consumption and a greater prevalence for mental disorders. The social support assessment revealed that hypertensive women received less help with preparing meals but had more company from people which allowed them to engage in enjoyable activities. CONCLUSION Women had more control over their blood pressure than men, despite the presence of negative biopsychosocial factors that may have influenced their adherence to the treatments.

An Automatic Approach for Learning and Tuning Gaussian Interval Type-2 Fuzzy Membership Functions Applied to Lung CAD Classification System

The potential of type-2 fuzzy sets for managing high levels of uncertainty in the subjective knowledge of experts or of numerical information has focused on control and pattern classification systems in recent years. One of the main challenges in designing a type-2 fuzzy logic system is how to estimate the parameters of type-2 fuzzy membership function (T2MF) and the Footprint of Uncertainty (FOU) from imperfect and noisy datasets. This paper presents an automatic approach for learning and tuning Gaussian interval type-2 membership functions (IT2MFs) with application to multi-dimensional pattern classification problems. T2MFs and their FOUs are tuned according to the uncertainties in the training dataset by a combination of genetic algorithm (GA) and crossvalidation techniques. In our GA-based approach, the structure of the chromosome has fewer genes than other GA methods and chromosome initialization is more precise. The proposed approach addresses the application of the interval type-2 fuzzy logic system (IT2FLS) for the problem of nodule classification in a lung Computer Aided Detection (CAD) system. The designed IT2FLS is compared with its type-1 fuzzy logic system (T1FLS) counterpart. The results demonstrate that the IT2FLS outperforms the T1FLS by more than 30% in terms of classification accuracy.

La gestión sanitaria: orientaciones a futuro para el cambio organizativo, del control y la financiación

This paper offers a general view of changes in health care management in theSpanish Health System. We focus on the organisational, financing andaccountability aspects of health care provision. We do this by encompassingmanagerial changes and social change and well-grounded in theory health economicsliterature. In this way we try to link applied economics and management issues,as we did in a former paper, ten years ago on the same basis(López-Casasnovas, 2002). We emphasise mistakes and milestones in the wayforward to improve health systems by better understanding the public natureof health policies. Key aspects of this are to achieve a better allocation ofresponsibilities to providers on patients health, to incentive the organisationof medical self-managed health care institutions and to build global budgets onrisk-adjusting capitation and better integrated health care providers on acommunity basis.

Control d'una bobinadora automàtica

Un dels problemes típics de regulació en el camp de l’automatització industrial és el control de velocitat lineal d’entrada del fil a les bobines, ja que com més gruix acumulem a igual velocitat de rotació de la bobina s’augmenta notablement la velocitat lineal d’entrada del fil, aquest desajust s’ha de poder compensar de forma automàtica per aconseguir una velocitat d’entrada constant. Aquest problema de regulació de velocitats és molt freqüent i de difícil control a la indústria on intervé el bobinat d’algun tipus de material com cablejat, fil, paper, làmines de planxa, tubs, etc... Els dos reptes i objectius principals són, primer, la regulació de la velocitat de rotació de la bobina per aconseguir una velocitat lineal del fil d’entrada, i segon, mitjançant el guiatge de l’alimentació de fil a la bobina, aconseguir un repartiment uniforme de cada capa de fil. El desenvolupament consisteix amb l’automatització i control d’una bobinadora automàtica mitjançant la configuració i programació de PLC’s, servomotors i encoders. Finalment es farà el muntatge pràctic sobre una bancada per verificar i simular el seu correcte funcionament que ha de donar solució a aquests problemes de regulació de velocitats. Com a conclusions finals s’han aconseguit els objectius i una metodologia per fer una regulació de velocitats de rotació per bobines, amb accionaments de servomotors amb polsos, i a nivell de coneixements he aconseguit dominar les aplicacions d’aquest tipus d’accionaments aplicats a construccions mecàniques.

Comprovador semiautomàtic per a automatisme de control de portes

L’objectiu d’aquest projecte és el de dissenyar un comprovador semiautomàtic per a un model d’automatisme que controla l’obertura i el tancament d’una porta. Aquest automatisme requereix d’una verificació de qualitat abans de ser introduït al mercat. La seva comprovació manual és lenta. L’objectiu principal del comprovador, és el de reduir aquest temps de test en almenys un 50% i fer més fàcil la detecció dels errors. El comprovador consta d’un suport per a l’automatisme que transmet els seus punts crítics a una placa de control. Conté un microcontrolador PIC16F887 que gestiona totes les entrades i sortides provinents de l’automatisme. També controla una pantalla LCD de 16x2 caràcters, que mostra els passos a seguir del test i si hi ha algun error. Es fa el disseny d’aquesta placa des de el hardware fins al software. Els resultats del projecte són satisfactoris, ja que compleix els objectius marcats i és un sistema que s’utilitza en l’empresa on es fabriquen aquests automatismes de control de portes.

Towards a theory of the credit-risk balance sheet

This article designs what it calls a Credit-Risk Balance Sheet (the risk being that of default by customers), a tool which, in principle, can contribute to revealing, controlling and managing the bad debt risk arising from a company¿s commercial credit, whose amount can represent a significant proportion of both its current and total assets.To construct it, we start from the duality observed in any credit transaction of this nature, whose basic identity can be summed up as Credit = Risk. ¿Credit¿ is granted by a company to its customer, and can be ranked by quality (we suggest the credit scoring system) and ¿risk¿ can either be assumed (interiorised) by the company itself or transferred to third parties (exteriorised).What provides the approach that leads to us being able to talk with confidence of a real Credit-Risk Balance Sheet with its methodological robustness is that the dual vision of the credit transaction is not, as we demonstrate, merely a classificatory duality (a double risk-credit classification of reality) but rather a true causal relationship, that is, a risk-credit causal duality.Once said Credit-Risk Balance Sheet (which bears a certain structural similarity with the classic net asset balance sheet) has been built, and its methodological coherence demonstrated, its properties ¿static and dynamic¿ are studied.Analysis of the temporal evolution of the Credit-Risk Balance Sheet and of its applications will be the object of subsequent works.

Towards a theory of the credit-risk balance sheet (II). The evolution of its structure

This article has an immediate predecessor, upon which it is based and with which readers must necessarily be familiar: Towards a Theory of the Credit-Risk Balance Sheet (Vallverdú, Somoza and Moya, 2006). The Balance Sheet is conceptualised on the basis of the duality of a credit-based transaction; it deals with its theoretical foundations, providing evidence of a causal credit-risk duality, that is, a true causal relationship; its characteristics, properties and its static and dynamic characteristics are analyzed. This article, which provides a logical continuation to the previous one, studies the evolution of the structure of the Credit-Risk Balance Sheet as a consequence of a business¿s dynamics in the credit area. Given the Credit-Risk Balance Sheet of a company at any given time, it attempts to estimate, by means of sequential analysis, its structural evolution, showing its usefulness in the management and control of credit and risk. To do this, it bases itself, with the necessary adaptations, on the by-now classic works of Palomba and Cutolo. The establishment of the corresponding transformation matrices allows one to move from an initial balance sheet structure to a final, future one, to understand its credit-risk situation trends, as well as to make possible its monitoring and control, basic elements in providing support for risk management.

Towards a theory of the credit-risk balance sheet

This article designs what it calls a Credit-Risk Balance Sheet (the risk being that of default by customers), a tool which, in principle, can contribute to revealing, controlling and managing the bad debt risk arising from a company¿s commercial credit, whose amount can represent a significant proportion of both its current and total assets.To construct it, we start from the duality observed in any credit transaction of this nature, whose basic identity can be summed up as Credit = Risk. ¿Credit¿ is granted by a company to its customer, and can be ranked by quality (we suggest the credit scoring system) and ¿risk¿ can either be assumed (interiorised) by the company itself or transferred to third parties (exteriorised).What provides the approach that leads to us being able to talk with confidence of a real Credit-Risk Balance Sheet with its methodological robustness is that the dual vision of the credit transaction is not, as we demonstrate, merely a classificatory duality (a double risk-credit classification of reality) but rather a true causal relationship, that is, a risk-credit causal duality.Once said Credit-Risk Balance Sheet (which bears a certain structural similarity with the classic net asset balance sheet) has been built, and its methodological coherence demonstrated, its properties ¿static and dynamic¿ are studied.Analysis of the temporal evolution of the Credit-Risk Balance Sheet and of its applications will be the object of subsequent works.

Towards a theory of the credit-risk balance sheet (II). The evolution of its structure

This article has an immediate predecessor, upon which it is based and with which readers must necessarily be familiar: Towards a Theory of the Credit-Risk Balance Sheet (Vallverdú, Somoza and Moya, 2006). The Balance Sheet is conceptualised on the basis of the duality of a credit-based transaction; it deals with its theoretical foundations, providing evidence of a causal credit-risk duality, that is, a true causal relationship; its characteristics, properties and its static and dynamic characteristics are analyzed. This article, which provides a logical continuation to the previous one, studies the evolution of the structure of the Credit-Risk Balance Sheet as a consequence of a business¿s dynamics in the credit area. Given the Credit-Risk Balance Sheet of a company at any given time, it attempts to estimate, by means of sequential analysis, its structural evolution, showing its usefulness in the management and control of credit and risk. To do this, it bases itself, with the necessary adaptations, on the by-now classic works of Palomba and Cutolo. The establishment of the corresponding transformation matrices allows one to move from an initial balance sheet structure to a final, future one, to understand its credit-risk situation trends, as well as to make possible its monitoring and control, basic elements in providing support for risk management.