Hydrographic winch

A winch suitable for lowering and hauling up of costly hydrographic apparatus like Bathy-thermograph, Reversible thermometers, Current flow meters etc., was designed, fabricated and tested at Off Shore Fishing Station, Cochin. The first model of this winch is in use on board the motor vessel Pratap, a Tuna Long linger.

Preliminary observations on the effect of a. c. current on Catla catla and Ophicephalus punctatus

In order to evolve suitable electrical fishing gear for inland waters, preliminary experiments have been conducted to observe effect of a. c. currents on Catla catla at voltages of 30, 90 and 120, pH 7.3 and 8.4, temperature 48°F, 78°F and 105°F, distance between electrodes 25 cm, 50 cm and 75 cm, size range of fish 100 mm, to 235 mm. Apparatus used was a 5 kw; a. c. 60 cycles generator with resistance control. Larger sizes of fish were more prone to electric shock. Higher temperature increases the intensity of the shock, while variation of pH between 7.3 to 8.4 did not materially affect the intensity of the shock. Fishing with a mixed population of Catla catla and Ophicephalus punctatus gave a greater percentage of mortality for the latter.

Induction of mitotic and meiotic gynogenesis and production of genetic clones in rohu, Labeo rohita Ham.

Studies were undertaken to produce genetic clones derived from all homozygous mitotic gynogenetic individuals in rohu, Labeo rohita Ham. ln view of this, attempts were made to interfere with the normal functioning of the spindle apparatus during the first mitotic cell division of developing eggs using heat shocks, there by leading to the induction of mitotic gynogenetic diploids in the F1 generation. Afterwards, viable mitotic gynogenetic alevins were reared and a selected mature female fish was used to obtain ovulated eggs which were fertilized later with UV-irradiated milt. Milt was diluted with Cortland’s solution and the sperm concentration was maintained at 10⁸/ml. The UV-irradiation was carried out for 2 minutes at the intensity of 200 to 250 µW/cm² at 28± 1°C. The optimal heat shock of 40°C for 2 minutes applied at 25 to 30 minutes a.f. was used to induce mitotic gynogenesis in first (F1) generation and at 3 to 5 minutes a.f. to induce meiotic gynogenesis in the second (F2) generation. The results obtained are presented and the light they shed on the timing of the mitotic and meiotic cell division in this species is discussed.

INFLUENCE OF ATMOSPHERIC HUMIDITY ON THE ABRASIVE WEAR OF METALS.

A pin-on-disc apparatus has been used to obtain continuous simultaneous measurements of the wear and friction (sliding force) behaviour of metals on bonded silicon carbide abrasive paper under conditions of controlled humidity. Iron, mild steel, and copper exhibit qualitatively similar wear behaviour; the wear rate decreases progressively with the number of passes over the same track. In contrast, the wear rate of titanium remains constant. Variation in atmospheric humidity has little effect on the wear rates of copper or titanium, although a slight effect was found in mild steel and iron. Refs.

硫代硫酸钠及葡萄糖对蓝细菌Synechocystis sP.PCC6803脂及光合器组成的影响

本文通过对蓝细菌Synechocystis sp. PCC 6803在添加葡萄糖、Na2S203的BG-11培养基中的生长特性、脂类及脂肪酸组成、细胞低温荧光、色素组成进行分析测定，总结出如下规律： 当蓝细菌Synechocystis sp. PCC 6803在添加有葡萄糖的BG-11培养基中培养时细胞出现了一种新的糖脂（记为糖脂-x），在添加果糖、麦芽糖、乳糖等其它碳源的培养基中生长的细胞中也检测到糖脂-x糖脂-x的出现经推测是与活性氧相作用的产物，当在含糖的培养基中加入活性氧猝灭剂Na2S203时能有效地抑制糖脂-x的出现。糖脂一x的出现伴随着其它脂、尤其是双半乳糖甘油二酯(DGDG)的含量下降，这可能与细胞营养代谢类型的转变相适应。糖脂-x的出现使细胞适应异养生长条件，这时藻胆体(PBS)，光系统II(PSII)，光系统I(PSD降解，叶绿素消失。 糖脂-x经1H-NMR波谱术检测证实为甘油糖脂，经气质联谱分析其脂肪酸组成中含大量的枝链脂肪酸，12-甲基十四碳酸、12-甲基十五碳酸、12-甲基十六碳酸以及两种稀有的含氮脂肪酸。这些脂肪酸在添加高浓度葡萄糖的培养基中生长的．Synechocystis sp. PCC 6803中的单半乳糖甘油二酯(MGDG)也能检测到。ESI-MS以及P-SI-MS测定结果表明糖脂．x含一分子的脂酰基侧链以及两分子的己糖，半乳糖与葡萄糖。 对．Synechocystis sp. PCC 6803生长在不同浓度的葡萄糖与Na2S203培养基中脂类组成与脂肪酸组成进行比较，发现Na2S203能有效地增加膜脂中硫代异鼠李糖二酰基甘油(SQDG)和磷脂酰甘油(PG)的百分含量，培养基中同时添加葡萄糖时能抵消Na2S203的这一效应。此外，Na2S203能显著增加单半乳糖甘油二酯(MGDG)、双半乳糖甘油二酯(DGDG)中十六碳酸(C16:0)的百分含量，这一效应也能为葡萄糖恢复。Na2S203不能显著地改变SQDG中C16:0的百分含量，加入葡萄糖时能降低C16:0的百分含量。这些结果说明Na2S203可能充当一种还原剂使膜脂处于一种低的不饱和状态，同时加入葡萄糖时能降低Na2S203的还原力。此外，Na2S203还可作为SQDG合成中的硫供体。 用HPLC测定．Synechocystis sp. PCC 6803在添加不同浓度的Na2S203，葡萄糖的BG-11培养基中生长时的叶绿素与类胡萝卜素浓度，结果表明葡萄糖表现出对叶绿素与类胡萝卜素水平的抑制效应，Na2S203在低浓度时表现出对叶绿素与类胡萝卜素水平的促进效应，但在高浓度时表现出抑制效应。因此适当浓度的Na2S203的加入有利于维持蓝细菌在培养基中添加葡萄糖的生长条件下的低水平自由基，能使葡萄糖表现出促进细胞生长的特性。 通过测定Synechocystis sp. PCC 6803生长曲线中葡萄糖、Na2S203的浓度效应，结果表明葡萄糖在低浓度（例如5 mmoI.L-l）时表现出促进细胞的生长，在相对高的浓度表现出抑制细胞生长的效应。在培养基中同时加入Na2S203时可恢复葡萄糖对细胞的生长的促进效应。单独加入Na2S203表现出对细胞生长的抑制效应。这说明葡萄糖、Na2S203对细胞的生长存在着正的协同效应。

INFLUENCE OF ATMOSPHERIC COMPOSITION ON THE ABRASIVE WEAR OF TITANIUM AND Ti-6Al-4V.

A pin-on-disc apparatus has been used to investigate the wear and friction (sliding force) behavior of metals on bonded silicon carbide and alumina papers under conditions of controlled atmospheric composition. The wear rates of both commercial purity titanium and the alloy Ti-6%Al-4%V tested in air were found to remain constant with time, in contrast with the behavior of other metals tested under similar conditions, which exhibited a progressive decrease in wear rate with increasing number of passes along the same track. It is proposed that the concentration of interstitial nitrogen and oxygen in the worn metal surface, which largely determines its mechanical properties, strongly influences both the ductility of the abraded material and the force of adhesion between the metal and the abrasive particles. Parallels are drawn between abrasive wear and machining to illustrate the importance of oxygen at the interface between workpiece and tool surfaces.

Experimental and theoretical comparison between static and dynamic torsional soil tests

The dynamic properties of dry Leighton Buzzard sand have been investigated using a resonant column test apparatus. These data are compared with very low frequency cyclic tests on identical specimens of sand. The comparison indicates that the properties of dry sand are independent of frequency. A simple one-dimensional model of kinematic hardening plasticity is used to predict the dynamic behaviour of the sand. The input parameters for this model are based on the results of static tests. These may be conducted on standard laboratory equipment with only minor modifications. The predictions are in good agreement with the measured data.

A new species of sisorid catfish genus Glyptothorax (Teleostei: Sisoridae) from Salween drainage of Yunnan, China

A new species of the genus Glyptothorax, Glyptothorax obliquimaculatus sp. nov. is described from the Xiaohei River, a tributary of the Nanting River, Salween drainage, in southwestern Yunnan province, China. This new species can be distinguished from its congeners by the following combination of characteristics: unculiferous ridges of the thoracic adhesive apparatus extending anteriorly onto the gular region; body with irregular dark blotches scattered along lateral surface (blotches mostly oblique); skin smooth on head and body; dorsal spine smooth without serrations on its posterior margin; lips smooth; posterior margin of pectoral spine with 7-8 serrations; dorsal-fin base 11.0-13.2% SL; pectoral-fin length 15.6-19.6% SL; depth of caudal peduncle 8.6-9.8% SL; head width 19.1-24.0% SL; nasal barbel length 23.3-33.3% HL.

Improved facilities for marine biology in East Africa

In 1967 the then University College of Dar es Salaam built a small laboratory on the shore at Kunduchi, 16 km from the main campus and 24 km north of Dar es Salaam. This was used for undergraduate field courses, and as a base for staff from the University to carry out research. It soon became apparent that the urgent need for studies of the marine environment in the East African area, and the lack of existing facilities, necessitated the development of the Kunduchi Marine Biology station into a research establishment with its own staff of full time scientists. This operation began in 1970: necessary structural modifications have been made to the building, staff have been recruited, and the station has been equipped with an adequate range of field and laboratory apparatus. A varied programme of research is now actively under way.

COMPARISON OF MASTICATORY MORPHOLOGY BETWEEN RHINOPITHECUS-BIETI AND R-ROXELLANA

The masticatory apparatus for two endemic species of golden monkey in China, Rhinopithecus bieti and Rhinopithecus roxellana, were compared with those of macaques, Macaca and leaf monkeys, Presbytis. Multivariate analyses demonstrated that the two golden monkey species are distinct. Interspecies allometric analyses revealed that golden monkeys differ in their masticatory apparatus from both macaques and leaf monkeys. The prominent symphysial fusion, corpus, and sagittal condylar dimension of R. roxellana may produce efficient biting force on the incisal and posterior canine teeth, with the heavy reaction force barn on the temporomandibular joint. However, the well-developed bizygamatic width and mandibular height in R. bieti suggest that posterior canine function is similarly prominent in R. roxellana, while incisal function is not. (C) 1995 Wiley-Liss, Inc.

Use of automatic sand pourers for loose sand models

The consistency of laboratory sand model preparation for physical testing is a fundamental criterion in representing identical geotechnical issues at prototype scale. This objective led to the development of robotic apparatus to eliminate the non-uniformity in manual pouring. Previous studies have shown consistent sand models with high relative density between 50 to 90% produced by the automatic moving-hopper sand pourer at the University of Cambridge, based primarily on a linear correlation to flow rate. However, in the case of loose samples, the influence of other parameters, particularly the drop height, becomes more apparent. In this paper, findings on the effect of flow rate and drop height are discussed in relation to the layer thickness and relative density of loose sand samples. Design charts are presented to illustrate their relationships. The effect of these factors on different sand types is also covered to extend the use of the equipment. © 2010 Taylor & Francis Group, London.

Superconducting fault current limiter design using parallel-connected YBCO thin films

Superconducting Fault Current Limiters (SFCLs) are able to reduce fault currents to an acceptable value, reducing potential mechanical and thermal damage to power system apparatus and allowing more flexibility in power system design and operation. The device can also help avoid replacing circuit breakers whose capacity has been exceeded. Due to limitations in current YBCO thin film manufacturing processes, it is not easy to obtain one large thin film that satisfies the specifications for high voltage and large current applications. The combination of standardized thin films has merit to reduce costs and maintain device quality, and it is necessary to connect these thin films in different series and parallel configurations in order to meet these specifications. In this paper, the design of a resistive type SFCL using parallel-connected YBCO thin films is discussed, including the role of a parallel resistor and the influence of individual thin film characteristics, based on both theory and experimental results. © 2009 IEEE.

Alternative methods for surface texturing

Surface texturing has a great potential to improve tribological performance. First, possible texturing methods were identified and classified according to their physical principles. In sequence, some alternative texturing methods are presented. Some of them are already currently used either in industry or in laboratory, and innovations or simplifications are described for them. Others are innovative techniques. Some were explored only tentatively, where basic ideas and simple experimental investigations were developed to check their validity. Others were explored in more detail, so that their practical applicability could be identified. The first texturing method was photochemical texturing using a simple and cheap apparatus. Masking with inkjet printing before chemical etching was also successful to texture metallic samples. A new method involving electrochemical texturing, without the need to previously mask the samples to be textured have been studied in terms of voltage, current, mechanical configuration of the apparatus and electrolyte flushing. Another method aims to generate randomly distributed circular pockets on steel surfaces and involves dispersion of small acid droplets in oil. The final method involves the selective formation of hard areas on a steel surface by locallised diffusion, which should then develop into a texture during wear.

High-resolution γ-ray spectroscopy: A versatile tool for nuclear β-decay studies at TRIUMF-ISAC

High-resolution γ-ray spectroscopy is essential to fully exploit the unique, high-quality beams available at the next generation of radioactive ion beam facilities such as the TRIUMF isotope separator and accelerator (ISAC). The 8π spectrometer, which consists of 20 Compton-suppressed HPGe detectors, has recently been reconfigured for a vigorous research programme in weak interaction and nuclear structure physics. With the addition of a variety of ancillary detectors it has become the world's most powerful device dedicated to β-decay studies. This paper provides a brief overview of the apparatus and highlights from recent experiments. © 2005 IOP Publishing Ltd.

Sand column impact onto a Kolsky pressure bar

A laboratory-based methodology to launch cylindrical sand slugs at high velocities is developed. The methodology generates well-characterised soil ejecta without the need for detonation of an explosive; this laboratory-based tool thereby allows for the experimental investigation of the soil-structure events. The experimental set-up comprises a launcher with a cylindrical cavity and a piston to push out the sand slug. The apparatus is used to launch both dry and water-saturated sand slugs. High speed photography is used to characterise the evolution of the sand slugs after launch. We find that the diameter of the slugs remains unchanged, and the sand particles possess only an axial component of velocity. However, the sand particles have a uniform spatial gradient of axial velocity and this results in lengthening of the slugs as they travel towards their target. Thus, the density of the sand slugs remains spatially homogenous but decreases with increasing time. The velocity gradient is typically higher in the dry sand slugs than that of the water-saturated slugs. The pressure exerted by the slugs on a rigid-stationary target is measured by impacting the slugs against a direct impact Kolsky bar. After an initial high transient pressure, the pressure reduces to a value of approximately ρv 2 where ρ is the density of the impacting sand slug and v is the particle velocity. This indicates that loading due to the sand is primarily inertial in nature. The momentum transmitted to the Kolsky bar was approximately equal to the incident momentum of the sand slugs, regardless of whether they are dry or water-saturated. © 2013 Elsevier Ltd. All rights reserved.