Modèles d'atmosphères hors-ETL avec métaux : applications aux étoiles sous-naines chaudes

Avec la mise en place dans les dernières années d'une grappe d'ordinateurs (CALYS) dédiés aux calculs de modèles stellaires pour notre groupe de recherche, il nous est désormais possible d'exploiter à leur plein potentiel les modèles d'atmosphères hors équilibre thermodynamique local (HETL) en y incluant des éléments métalliques. Ce type de modèles, plutôt exigeant en temps de calcul, est toutefois essentiel pour analyser correctement les spectres d'étoiles chaudes comme les sous-naines de type O (sdO). Les travaux effectués dans le cadre de cette thèse ont comme point commun l'utilisation de tels modèles d'atmosphères pour faire l'analyse spectroscopique d'étoiles sous-naines chaudes dans des contextes variés. Le coeur de cette thèse porte sur Bd+28 4211, une étoile standard de type sdO très chaude, dans laquelle le problème des raies de Balmer, qui empêche de reproduire ces dernières avec une unique, et réaliste, combinaison de paramètres atmosphériques, est bien présent. Dans un premier temps nous présentons une analyse approfondie de son spectre ultraviolet (UV). Cela nous permet de déterminer les abondances de métaux dans l'atmosphère de l'étoile et de contraindre sa température effective et sa gravité de surface. Par la suite, ces résultats servent de point de départ à l'analyse du spectre optique de l'étoile, dans lequel le problème des raies de Balmer se fait sentir. Cette analyse nous permet de conclure que l'inclusion des abondances métalliques propres à l'étoile dans les modèles d'atmosphères HETL n'est pas suffisant pour surmonter le problème des raies de Balmer. Toutefois, en y incluant des abondances dix fois solaires, nous arrivons à reproduire correctement les raies de Balmer et d'hélium présentes dans les spectres visibles lors d'un ajustement de paramètres. De plus, les paramètres résultants concordent avec ceux indiqués par le spectre UV. Nous concluons que des sources d'opacité encore inconnues ou mal modélisées sont à la source de ce problème endémique aux étoiles chaudes. Par la suite nous faisons une étude spectroscopique de Feige 48, une étoile de type sdB pulsante particulièrement importante. Nous arrivons à reproduire très bien le spectre visible de cette étoile, incluant les nombreuses raies métalliques qui s'y trouvent. Les paramètres fondamentaux obtenus pour Feige 48 corroborent ceux déjà présents dans la littérature, qui ont été obtenus avec des types de modèles d'atmosphères moins sophistiqués, ce qui implique que les effets HETL couplés à la présence de métaux ne sont pas importants dans l'atmosphère de cette étoile particulière. Nous pouvons donc affirmer que les paramètres de cette étoile sont fiables et peuvent servir de base à une future étude astérosismologique quantitative. Finalement, 38 étoiles sous-naines chaudes appartenant à l'amas globulaire omega Centauri ont été analysées afin de déterminer, outre leur température et gravité de surface, leurs abondances d'hélium et de carbone. Nous montrons qu'il existe une corrélation entre les abondances photosphériques de ces deux éléments. Nous trouvons aussi des différences entre les étoiles riches en hélium de l'amas du celles du champ. Dans leur ensemble, nos résultats remettent en question notre compréhension du mécanisme de formation des sous-naines riches en hélium.

Demi-vérités et vrais mensonges : une analyse des processus liés à la dissimulation dans les questionnaires informatisés

De nombreux chercheurs et cliniciens sont sceptiques quant à la validité des questionnaires autoadministrés, lorsqu’utilisés auprès d’une population carcérale (Gendreau, Irvine et Knight, 1973), surtout si celle-ci est composée de délinquants sexuels (Marshall et Hall, 1995). La sensibilité des sujets investigués jumelés à la transparence des questions expose l’évaluateur à la possibilité que le participant dissimule et modifie ses réponses (Tierney et McCabe, 2001). L’objectif de ce projet est de comprendre les processus impliqués dans la performance des participants à une évaluation autoadministrée. Les données de 282 délinquants sexuels ayant complétés le Multidimensional Inventory of Development, Sex, and Agression (MIDSA) ont été analysées afin de mieux comprendre l’interaction entre les échelles de désirabilité sociale, les temps de latence et les coefficients d’ajustement du modèle de Rasch. La convergence des analyses de temps de latence et des échelles de désirabilité sociale semble indiquer que certains participants dissimuleraient consciemment leurs réponses. Notamment, les participants détectés par les échelles de désirabilité sociales sembleraient répondre de manière de plus lente aux échelles d’évaluations, et certains d’entre eux offriraient des patrons de réponses incohérents à la prescription du modèle de Rasch. Les hypothèses permettant d’expliquer les potentiels mécanismes liés à la dissimulation seront discutées.

Le potentiel des technologies de l’information et des communications pour le renforcement de la résilience organisationnelle lors des opérations d’évacuation : é́tude de cas de la ville de New York

Lorsque les ouragans entrent en contact avec l'environnement bâti et naturel, les autorités publiques n'ont parfois d'autre choix que de déclarer l'évacuation obligatoire de la population située en zone à risque. En raison de l'imprévisibilité du déroulement d'une catastrophe et des comportements humains, les opérations d'évacuation sont confrontées à une incertitude significative. Les expériences passées ont montré que les technologies de l'information et des communications (TIC) ont le potentiel d'améliorer l'état de l'art en gestion des évacuations. Malgré cette reconnaissance, les recherches empiriques sur ce sujet sont à ce jour limitées. La présente étude de cas de la ville de New York explore comment l'intégration des TIC dans la planification opérationnelle des organisations ayant des responsabilités en matière de transport peut améliorer leurs réponses aux événements et influencer le succès global du système de gestion des catastrophes. L'analyse est basée sur les informations recueillies au moyen d'entretiens semi-dirigés avec les organisations de transport et de gestion des catastrophes de la ville de New York ainsi qu’avec des experts du milieu universitaire. Les résultats mettent en lumière le potentiel des TIC pour la prise de décision en interne. Même s’il est largement reconnu que les TIC sont des moyens efficaces d'échanger de l'information en interne et entre les organisations, ces usages sont confrontés à certaines contraintes technologique, organisationnelle, structurelle et systémique. Cette observation a permis d'identifier les contraintes vécues dans les pratiques usuelles de gestion des systèmes urbains.

A PVC plasticized membrane sensor for nickel ions

A new PVC membrane sensor, which is highly selective towards Ni (II) ions, has been developed using a thiophene-derivative Schiff base as the ionophore. The best performance was exhibited by the membrane having the composition percentage ratio of 5:3:61:31 (ionophore:NaTPB:DBP:PVC) (w=w), where NaTPB is the anion excluder, sodium tetraphenylborate and DBP is the plasticizing agent (dibutyl phthalate). The membrane exhibited a good Nernstian response for nickel ions over the concentration range of 1.0 10 1– 5.0 10 6M (limit of detection is 1.8 10 6 M) with a slope of 29.5 1.0mV per decade of activity. It has a fast response time of<20 s and can be used for a period of 4 months with good reproducibility. The sensor is suitable for use in aqueous solutions of a wide pH range of 3.2–7.9. The sensor shows high selectivity to nickel ions over a large number of mono-, bi- and trivalent cations. It has been successfully used as an indicator electrode in the potentiometric titration of nickel ions against EDTA and also for direct determination of nickel content in real samples – wastewater samples from electroplating industries and Indian chocolates.

A PVC Plasticized Membrane Sensor for Nickel Ions

A new PVC membrane sensor, which is highly selective towards Ni (II) ions, has been developed using a thiophene-derivative Schiff base as the ionophore. The best performance was exhibited by the membrane having the composition percentage ratio of 5:3:61:31 (ionophore:NaTPB:DBP:PVC) (w=w), where NaTPB is the anion excluder, sodium tetraphenylborate and DBP is the plasticizing agent (dibutyl phthalate). The membrane exhibited a good Nernstian response for nickel ions over the concentration range of 1.0 10 1– 5.0 10 6M (limit of detection is 1.8 10 6 M) with a slope of 29.5 1.0mV per decade of activity. It has a fast response time of<20 s and can be used for a period of 4 months with good reproducibility. The sensor is suitable for use in aqueous solutions of a wide pH range of 3.2–7.9. The sensor shows high selectivity to nickel ions over a large number of mono-, bi- and trivalent cations. It has been successfully used as an indicator electrode in the potentiometric titration of nickel ions against EDTA and also for direct determination of nickel content in real samples – wastewater samples from electroplating industries and Indian chocolates.

A PVC Plasticized Sensor for Ni(II) Ion Based on a Simple Ethylenediamine Derivative

new PVC membrane ion selective electrode which is highly selective towards Ni(II) ions was constructed using a Schiff base containing a binaphthyl moiety as the ionophore. The sensor exhibited a good Nernstian response for nickel ions over the concentration range 1.0 × 10–1 – 5.0 × 10–6 M with a lower limit of detection of 1.3 × 10–6 M. It has a fast response time and can be used for a period of 4 months with a good reproducibility. The sensor is suitable for use in aqueous solutions in a wide pH range of 3.6 – 7.4 and works satisfactorily in the presence of 25% (v/v) methanol or ethanol. The sensor shows high selectivity to nickel ions over a wide variety of cations. It has been successfully used as an indicator electrode in the potentiometric titration of nickel ions against EDTA and also for the direct determination of nickel content in real samples: effluent samples, chocolates and hydrogenated oils.

A Novel Potentiometric Sensor for the Determination of Nimesulide

A novel electrochemical sensor has been developed for the determination of nimesulide. The sensor is based on the NIM- molybdophosphoric acid (MPA) as the electroactive material in PVC matrix in presence of bis(2-ethyl hexyl) phthalate (BEP) as a plasticizer. The sensor showed a fast, stable, near Nernstian response for 1 × 10-2 –1 × 10-6 M NIM over the pH range 5 – 8 with a slope 55.6 ±0.5m V/decade and the response time is < 45 s. Selectivity coefficient data for some common ions show negligible interferences. The sensor was successfully applied for the determination of NIM in tablet and the results obtained are in good agreement with those obtained by the official method.

Fibre optic sensor for the detection of adulterant traces in coconut oil

The design and development of a fibre optic evanescent wave refractometer for the detection of trace amounts of paraffin oil and palm oil in coconut oil is presented. This sensor is based on a side-polished plastic optical fibre. At the sensing region, the cladding and a small portion of the core are removed and the fibre nicely polished. The sensing region is fabricated in such a manner that it sits perfectly within a bent mould. This bending of the sensing region enhances its sensitivity. The oil mixture of different mix ratios is introduced into the sensing region and we observed a sharp decrease in the output intensity. The observed variation in the intensity is found to be linear and the detection limit is 2% (by volume) paraffin oil/palm oil in coconut oil. The resolution of this refractometric sensor is of the order of 10−3. Since coconut oil is consumed in large volumes as edible oil in south India, this fibre optic sensor finds great relevance for the detection of adulterants such as paraffin oil or palm oil which are readily miscible in coconut oil. The advantage of this type of sensor is that it is inexpensive and easy to set up. Another attraction of the side-polished fibre is that only a very small amount of analyte is needed and its response time is only 7 s.

A Chloride Ion-Selective Potentiometric Sensor Based on a Polymeric Schiff Base Complex

This paper describes the fabrication of an ion-selective electrode in which a polymeric Schiff base complex of cobalt(II) is used as the ionophore.The main advantage of the electrode is that it is mechanically stable upto 3 months..The electrode shows a linear response in the range of 2.5 × 10-5-0.5 × 10-1 mol dm-3. The response time of the electrode is 30 s.The pH range at which the electrode works is 3.8 to 6.8. The electrode was found to be selective towards chloride ion in the presence of ions like Na+, Ca2+, Mn2+, ,Fe3+, Co2+, Ni2+, Cu2+, Zn2+, CH3COO-, NO3-, SO42- ,Br- and NO2-.

Fabrication of Potentiometric Sensors for the Selective Determination of Ketoconazole

The fabrication and analytical applications of two types of potentiometric sensors for the determination of ketoconazole (KET) are described. The sensors are based on the use of KET-molybdophosphoric acid (MPA) ion pair as electroactive material. The fabricated sensors include both polymer membrane and carbon paste electrodes. Both sensors showed a linear, stable and near Nernstian slope of 57.8mV=decade and 55.2mV=decade for PVC membrane and carbon paste sensors respectively over a relatively wide range of KET concentration (1×10-2-5×10-5 and 1×10-2-1×10-6). The sensors showed a fast response time of <30 sec and <45 sec. A useful pH range of 3–6 was obtained for both types of sensors. A detection limit of 2.96 10 5M was obtained for PVC membrane sensor and 6.91 10 6M was obtained for carbon paste sensor. The proposed sensors proved to have a good selectivity for KET with respect to a large number of ions. The proposed sensors were successfully applied for the determination of KET in pharmaceutical formulations. The results obtained are in good agreement with the values obtained by the standard method.

Laser-induced Bessel beams can realize fast all-optical switching in gold nanosol prepared by pulsed laser ablation

We demonstrate the possibility of realizing, all-optical switching in gold nanosol. Two overlapping laser beams are used for this purpose, due to which a low-power beam passing collinear to a high-power beam will undergo cross phase modulation and thereby distort the spatial profile. This is taken to advantage for performing logic operations. We have also measured the threshold pump power to obtain a NOT gate and the minimum response time of the device. Contrary to the general notion that the response time of thermal effects used in this application is of the order of milliseconds, we prove that short pump pulses can result in fast switching. Different combinations of beam splitters and combiners will lead to the formation of other logic functions too.

Fabrication of Electrochemical Sensors for Pharmaceutical Analysis

Potentiometric chemical sensors,an important class of electro-chemical sensors are widely used in pharmaceutical analysis because of its inherent advantages.The present study was aimed at fabrication of potentiometric sensors for the drugs mebendazole,pefloxacin,ambroxol,sildenafil citrate,dextro-methorphan and tetracycline.A total of 18 sensors have been developed for the determination of theses drugs.The major step in the fabrication of the sensor was the preparation of the ion association.Two types of sensors viz:PVC membrane sensor and carbon paste electode (CPE) were fabricated.The response characteristics of the different sensors fabricated were studied.Various response parameters studied include response time,selectivity and the effect of pH.The developed sensors were also employed for the determination of the drugs in pharmaceutical formulations and also for the recovery of the drug from urine samples.The selectivity studies reveal that the developed sensors are highly selective to the drug even in prescence of foreign ions.

Development of Macrocyclics based Electrochemical Sensors

Electroanalytical techniques represent a class of powerful and versatile analytical method which is based on the electrical properties of a solution of the analyte when it is made part of an electrochemical cell. They offer high sensitivity, accuracy, precision and a large linear dynamic range. The cost of instrumentation is relatively low compared to other instrumental methods of analysis. Many solid state electrochemical sensors have been commercialised nowadays. Potentiometry is a very simple electroanalytical technique with extraordinary analytical capabilities. Since valinomycin was introduced as an ionophore for K+, Ion Selective Electrodes have become one of the best studied and understood analytical devices. It can be used for the determination of substances ranging from simple inorganic ions to complex organic molecules. It is a very attractive option owing to the wide range of applications and ease of the use of the instruments employed. They also possess the advantages of short response time, high selectivity and very low detection limits. Moreover, analysis by these electrodes is non-destructive and adaptable to small sample volumes. It has become a standard technique for medical researchers, biologists, geologists and environmental specialists. This thesis presents the synthesis and characterisation of five ionophores. Based on these ionophores, nine potentiometric sensors are fabricated for the determination of ions such as Pb2+, Mn2+, Ni2+, Cu2+ and Sal- ion (Salicylate ion). The electrochemical characterisation and analytical application studies of the developed sensors are also described. The thesis is divided into eight chapters

Voltammetric Sensors for the Determination of Pharmaceuticals

Electrochemical sensors are increasingly being investigated to perform measurements for single or multiple analytes. Demanded by modern medical diagnosis, advances in microfabrication technology have led to the development of fast, sensitive and selective electrochemical sensors for drug analysis. Electrochemical sensors for the measurement of analytes of interest in clinical chemistry are ideally suited for these applications, due to their high sensitivity and selectivity, simple-to-operate, rapid response time and low-cost. As part of the present investigations eight voltammetric sensors have been fabricated for six drugs such as PAM Chloride, Tamsulosin Hydrochloride, Hesperidin Methyl Chalcone, Guaiphenesin, Cephalexin and Amoxicillin trihydrate. The modification techniques adopted as part of the present work include multiwalled carbon nanotube (MWNT) based modifications, electropolymerization, gold nanoparticle (AuNP) based modifications and platinum nanoparticle (PtNP) based modifications. The thesis is divided into nine chapters

Novel potentiometric sensors for the selective determination of domperidone

The fabrication and electrochemical response characteristics of two novel potentiometric sensors for the selective determination of domperidone (DOM) are described. The two fabricated sensors incorporate DOM–PTA (phosphotungstic acid) ion pair as the electroactive material. The sensors include a PVC membrane sensor and a carbon paste sensor. The sensors showed a linear, stable, and near Nernstian slope of 56.5 and 57.8 mV/decade for PVC membrane and carbon paste sensors, respectively over a relatively wide range of DOM concentration (1.0 9 10-1–1.0 9 10-5 and 1.0 9 10-1–3.55 9 10-6 M). The response time of DOM–PTA membrane sensor was less than 25 s and that in the case of carbon paste sensor was less than 20 s.Auseful pH range of 4–6 was obtained for both types of sensors. A detection limit of 7.36 9 10-5 M was obtained for PVC membrane sensor and 1.0 9 10-6 M was obtained for carbon paste sensor. The proposed sensors showed very good selectivity toDOMin the presence of a large number of other interfering ions. The analytical application of the developed sensors in the determination of the drug in pharmaceutical formulations such as tablets was investigated. The results obtained are in good agreement with the values obtained by the standard method. The sensors were also applied for the determination ofDOMin real samples such as urine by the standard addition method.