The Effect of Mobile Technology as an Active Student Response System on the Acquisition of U.S. History Content of Secondary Students with Specific Learning Disabilities

Students with specific learning disabilities (SLD) typically learn less history content than their peers without disabilities and show fewer learning gains. Even when they are provided with the same instructional strategies, many students with SLD struggle to grasp complex historical concepts and content area vocabulary. Many strategies involving technology have been used in the past to enhance learning for students with SLD in history classrooms. However, very few studies have explored the effectiveness of emerging mobile technology in K-12 history classrooms. This study investigated the effects of mobile devices (iPads) as an active student response (ASR) system on the acquisition of U.S. history content of middle school students with SLD. An alternating treatments single subject design was used to compare the effects of two interventions. There were two conditions and a series of pretest probesin this study. The conditions were: (a) direct instruction and studying from handwritten notes using the interactive notebook strategy and (b) direct instruction and studying using the Quizlet App on the iPad. There were three dependent variables in this study: (a) percent correct on tests, (b) rate of correct responses per minute, and (c) rate of errors per minute. A comparative analysis suggested that both interventions (studying from interactive notes and studying using Quizlet on the iPad) had varying degrees of effectiveness in increasing the learning gains of students with SLD. In most cases, both interventions were equally effective. During both interventions, all of the participants increased their percentage correct and increased their rate of correct responses. Most of the participants decreased their rate of errors. The results of this study suggest that teachers of students with SLD should consider a post lesson review in the form of mobile devices as an ASR system or studying from handwritten notes paired with existing evidence-based practices to facilitate students’ knowledge in U.S. history. Future research should focus on the use of other interactive applications on various mobile operating platforms, on other social studies subjects, and should explore various testing formats such as oral question-answer and multiple choice.

A framework for policy based coordinated adaptation in mobile systems

Adaptation is an important requirement for mobile applications due to the varying levels of resource availability that characterizes mobile environments. However without proper control, multiple applications can each adapt independently in response to a range of different adaptive stimuli, causing conflicts or sub optimal performance. In this thesis we presented a framework, which enables multiple adaptation mechanisms to coexist on one platform. The key component of this framework was the 'Policy Server', which has all the system policies and governs the rules for adaptation. We also simulated our framework and subjected it to various adaptation scenarios to demonstrate the working of the system as a whole. With the help of the simulation it was shown that our framework enables seamless adaptation of multiple applications.

Dynamic data retrieval on the world wide web

Methods for accessing data on the Web have been the focus of active research over the past few years. In this thesis we propose a method for representing Web sites as data sources. We designed a Data Extractor data retrieval solution that allows us to define queries to Web sites and process resulting data sets. Data Extractor is being integrated into the MSemODB heterogeneous database management system. With its help database queries can be distributed over both local and Web data sources within MSemODB framework. Data Extractor treats Web sites as data sources, controlling query execution and data retrieval. It works as an intermediary between the applications and the sites. Data Extractor utilizes a two-fold "custom wrapper" approach for information retrieval. Wrappers for the majority of sites are easily built using a powerful and expressive scripting language, while complex cases are processed using Java-based wrappers that utilize specially designed library of data retrieval, parsing and Web access routines. In addition to wrapper development we thoroughly investigate issues associated with Web site selection, analysis and processing. Data Extractor is designed to act as a data retrieval server, as well as an embedded data retrieval solution. We also use it to create mobile agents that are shipped over the Internet to the client's computer to perform data retrieval on behalf of the user. This approach allows Data Extractor to distribute and scale well. This study confirms feasibility of building custom wrappers for Web sites. This approach provides accuracy of data retrieval, and power and flexibility in handling of complex cases.

Uma proposta de solução para funcionamento offline em aplicações android

Given the growing demand for the development of mobile applications, driven by use increasingly common in smartphones and tablets grew in society the need for remote data access in full in the use of mobile application without connectivity environments where there is no provision network access at all times. Given this reality, this work proposes a framework that present main functions are the provision of a persistence mechanism, replication and data synchronization, contemplating the creation, deletion, update and display persisted or requested data, even though the mobile device without connectivity with the network. From the point of view of the architecture and programming practices, it reflected in defining strategies for the main functions of the framework are met. Through a controlled study was to validate the solution proposal, being found as the gains in reducing the number of lines code and the amount of time required to perform the development of an application without there being significant increase for the operations.

Uma proposta de solução para funcionamento offline em aplicações android

Given the growing demand for the development of mobile applications, driven by use increasingly common in smartphones and tablets grew in society the need for remote data access in full in the use of mobile application without connectivity environments where there is no provision network access at all times. Given this reality, this work proposes a framework that present main functions are the provision of a persistence mechanism, replication and data synchronization, contemplating the creation, deletion, update and display persisted or requested data, even though the mobile device without connectivity with the network. From the point of view of the architecture and programming practices, it reflected in defining strategies for the main functions of the framework are met. Through a controlled study was to validate the solution proposal, being found as the gains in reducing the number of lines code and the amount of time required to perform the development of an application without there being significant increase for the operations.

Studio del modello Augmented Worlds per l'ingegneria di sistemi software basati su realtà aumentata: esplorazioni basate su Unity e Android

Negli ultimi anni il crescere della capacità di calcolo dei dispositivi e il diminuire delle loro dimensioni ha permesso di far nascere idee innovative e di esplorare più in dettaglio alcuni settori. Uno di questi è sicuramente quello della realtà aumentata (Augmented reality), infatti, la discussione su questo argomento nasce già negli anni 40 del novecento, ma, per mancanza di mezzi tecnologici adeguati, solo ora si iniziano a realizzare le prime applicazioni che si basano su questa idea e il grande pubblico inizia ad interessarsi all'argomento. La costruzione di applicazioni di realtà aumentata, al momento, è basata sull'utilizzo di alcuni framework che mettono a disposizione dello sviluppatore alcune funzioni molto comuni in questi software, come il tracking di marker e l'utilizzo di bottoni virtuali. Questi strumenti, seppur comodi, non garantiscono sempre la buona progettazione dell'applicazione e tendono a unire insieme parti di logica applicativa e di grafica. Per questo motivo, anche nella ricerca, si stanno cercando di studiare dei metodi in grado di permettere una divisione ottimale dei compiti in modo da ottenere un software riusabile e facilmente mantenibile, ma che permetta anche di sfruttare appieno le potenzialità dell'AR attraverso, per esempio, sistemi distribuiti. Un framework concettuale che rientra in questa categoria è sicuramente quello degli Augmented Worlds, mondi virtuali collegati a quello fisico che ne incrementano le caratteristiche e le possibilità tramite la presenza di entità aumentate. La tesi, quindi, si propone di sviluppare un prototipo di un framework con le caratteristiche sopra citate di estendibilità, utilizzando le piattaforme in questo momento a disposizione e ispirandosi alla visione degli Augmented Worlds.

tuProlog su piattaforma Android: reingegnerizzazione in ottica Modern UI e fruibilità "as a service"

Questa tesi si occupa principalmente della revisione grafica in ottica Modern UI dell'app tuProlog Android, nella prospettiva di renderlo in futuro disponibile anche in modalità as-a-service. Dopo una attenta analisi preliminare dell'architettura di tuProlog in generale e in particolare della struttura dell'app tuProlog preesistente e del relativo progetto in ambiente Eclipse, ci si è focalizzati sulla riprogettazione dell'app, dall'analisi dei requisiti - ivi incluso il nuovo strumento di sviluppo da utilizzare, Android Studio - alla successiva analisi e progettazione della nuova soluzione, seguita da implementazione e collaudo.

State-of-the-Art Multihoming Protocols and Support for Android

Il traguardo più importante per la connettività wireless del futuro sarà sfruttare appieno le potenzialità offerte da tutte le interfacce di rete dei dispositivi mobili. Per questo motivo con ogni probabilità il multihoming sarà un requisito obbligatorio per quelle applicazioni che puntano a fornire la migliore esperienza utente nel loro utilizzo. Sinteticamente è possibile definire il multihoming come quel processo complesso per cui un end-host o un end-site ha molteplici punti di aggancio alla rete. Nella pratica, tuttavia, il multihoming si è rivelato difficile da implementare e ancor di più da ottimizzare. Ad oggi infatti, il multihoming è lontano dall’essere considerato una feature standard nel network deployment nonostante anni di ricerche e di sviluppo nel settore, poiché il relativo supporto da parte dei protocolli è quasi sempre del tutto inadeguato. Naturalmente anche per Android in quanto piattaforma mobile più usata al mondo, è di fondamentale importanza supportare il multihoming per ampliare lo spettro delle funzionalità offerte ai propri utenti. Dunque alla luce di ciò, in questa tesi espongo lo stato dell’arte del supporto al multihoming in Android mettendo a confronto diversi protocolli di rete e testando la soluzione che sembra essere in assoluto la più promettente: LISP. Esaminato lo stato dell’arte dei protocolli con supporto al multihoming e l’architettura software di LISPmob per Android, l’obiettivo operativo principale di questa ricerca è duplice: a) testare il roaming seamless tra le varie interfacce di rete di un dispositivo Android, il che è appunto uno degli obiettivi del multihoming, attraverso LISPmob; e b) effettuare un ampio numero di test al fine di ottenere attraverso dati sperimentali alcuni importanti parametri relativi alle performance di LISP per capire quanto è realistica la possibilità da parte dell’utente finale di usarlo come efficace soluzione multihoming.

Desarrollo de una app para la generación preventiva de alertas sanitarias

Desde hace unos años, parece que la informática ha ido invadiendo numerosos campos de la ciencia, se ha ido consolidando como parte fundamental en el desarrollo y la tecnología y ya se puede ver como motor de la economía, las comunicaciones, el comercio e incluso, la medicina. Este trabajo se centra en la aplicación de la informática en el área de las enfermedades infecciosas, intentando contribuir con una nueva idea que revolucione el mundo de las mismas dentro de la medicina, en una situación en la que el término “Smart City” cada vez es más importante. Se trata de un sistema formado por una app para Android y una web controlada y gestionada por un médico, la cual permite identificar posibles usuarios contagiados, localizar focos de contagios y gestionar de una manera óptima, el estado y los avisos de cada usuario. En esta memoria se describe el trabajo realizado, la arquitectura del sistema, las tecnologías utilizadas, el diseño de la aplicación móvil y de la página web, su implementación, las pruebas realizadas, las conclusiones a las que se ha llegado y las posibles mejoras que se podrían incluir en el proyecto en un futuro.

RAGE Reusable Game Software Components and Their Integration into Serious Game Engines

This paper presents and validates a methodology for integrating reusable software components in diverse game engines. While conforming to the RAGE com-ponent-based architecture described elsewhere, the paper explains how the interac-tions and data exchange processes between a reusable software component and a game engine should be implemented for procuring seamless integration. To this end, a RAGE-compliant C# software component providing a difficulty adaptation routine was integrated with an exemplary strategic tile-based game “TileZero”. Implementa-tions in MonoGame, Unity and Xamarin, respectively, have demonstrated successful portability of the adaptation component. Also, portability across various delivery platforms (Windows desktop, iOS, Android, Windows Phone) was established. Thereby this study has established the validity of the RAGE architecture and its un-derlying interaction processes for the cross-platform and cross-game engine reuse of software components. The RAGE architecture thereby accommodates the large scale development and application of reusable software components for serious gaming.

D2.3 First bundle of client-side components

This document describes the first bundle of core WP2 (user data analytics) client side components, including their specifications, usecases, and working prototypes. Included assets contain a description of their current status, and links to their full designs and downloadable versions. This deliverable only describes operational SW assets (even though beta) that are tested and documented. It should be noted, however, that various additional software assets (2.2d Cognitive Capacity Measurement and 2.3a Realtime Emotion Detection) are near completion for inclusion in games during the first pilot round. Those assets are still scheduled for inclusion in the final bundle deliverable D2.2.

D2.1 - First bundle of server-side components

This document describes the first bundle of core WP2 (user data analytics) serverside components, including their specifications, usecases, and working prototypes. Included assets contain a description of their current status, and links to their full designs and downloadable versions.

Fuzzy logic-based implicit authentication for mobile access control

In order to address the increasing compromise of user privacy on mobile devices, a Fuzzy Logic based implicit authentication scheme is proposed in this paper. The proposed scheme computes an aggregate score based on selected features and a threshold in real-time based on current and historic data depicting user routine. The tuned fuzzy system is then applied to the aggregated score and the threshold to determine the trust level of the current user. The proposed fuzzy-integrated implicit authentication scheme is designed to: operate adaptively and completely in the background, require minimal training period, enable high system accuracy while provide timely detection of abnormal activity. In this paper, we explore Fuzzy Logic based authentication in depth. Gaussian and triangle-based membership functions are investigated and compared using real data over several weeks from different Android phone users. The presented results show that our proposed Fuzzy Logic approach is a highly effective, and viable scheme for lightweight real-time implicit authentication on mobile devices.

AR-park för Android : Augmented Reality park i Sundsvall

Målet med detta projekt är att ta fram en applikationsprototyp för Androidenheter som ska locka användare av applikationen till och tillbaka till broparken i Skönsberg med hjälp av augmented-reality. Applikationen ska känna av om användaren befinner sig inom eller utanför parkens område och visa olika bilder/modeller på specifika GPS-koordinater i det digitala lagret beroende på användarens positionering. Arbetet har genomförts i samarbete med Dohi på uppdrag av Sundsvalls kommun där regelbundna möten hafts med uppdragsgivaren. Utvecklingen av applikationen sker i PhoneGap med Wikitude-plugin. Projektet har resulterat i en applikationsprototyp som använder ActionRanges, som är en typ av GeoFence, för att presentera olika bilder hämtade från en egen server i det digitala lagret beroende på användarens position. Användarna har inom parkens område möjlighet att själv påverka de bilder som visas i det digitala lagret genom att i applikationen ta en bild som laddas upp till servern där bilderna lagras och där bilden som tagits även visar det digitala lagret.

JChord : An Android application helping people learn guitar chords

Nowadays, a lot of interesting and useful and imaginative applications are springing to Android software market. And for guitar fans, some related apps bring great connivence to them, like a guitar tuner can save people from carrying a entity tuner all the time, some apps can simulate a real guitar, and some apps provide some simple lessons allowing people to learn some basic things. But these apps which can teach people, they can't really “monitor ” people, that is, they just give some instructions and hope people would follow them. So my project is to design an app which can detect if users are playing wrong and right real-timely. Guitar chords are always the first for new guitar beginners to learn, and a chord is a set of notes combined together in a regulated way ( get from the music theory having millions of developing ), and 'pitch' is the term for determining if the note different from other notes or noise, so the problem here is to manage the multi-pitch analysis in real time. And it's necessary to know some basics of digital signal processing ( DSP ) because digital signals are always more convenient for computers to analyze compared to analog signals. Then I found an audio processing Java library – TarsosDSP, and try to apply it to my Android project.