999 resultados para Alto Rio Paraná


Relevância:

30.00% 30.00%

Publicador:

Resumo:

The biomonitoring technique for water quality in water bodies has been incorporated increasingly in management of the natural resources, using mainly indices of its aquatic community characteristics. In Brazil the first efforts to use this technique was restricted to the South and the Midwest region of this country. Located in the northeast region, this study was conducted at Rio Grande do Norte state and had as main objective the assessment of water quality in the Piranhas-Açu river using benthic macroinvertebrates community as biological indicators. Thus, were applied two biotic indices, the BMWP (Biological Monitoring Working Party score system) and the IBF (Family Biotic Index). According the requirements of these indices, two periods of sampling were determined as basic methodology, in dry seasons of 2006 and 2007. The sampling sites were around the municipalities of Açu, Ipanguaçu, Alto do Rodrigues and Pendências. Physical-chemical measurements; a protocol of rapid assessment of diversity of habitats, and determination of the degree of tolerance of each taxon to organic pollution were also performed. The most abundant organisms found in the river were tolerant with the prevalence of Chironomidae (Diptera) and Melanoides tuberculata. This results, together with those ones got in indices application, showed a considerable organic pollution in the four sample places and the reaches were classified as modified to impacted. According to the used indices, this study suggest that this river have significant alteration in the biotic community and water quality on the organic pollution, and this fact, occurs in the reach of the river further downstream, where were expected a good water quality. Considering these results, measures aiming the conservation of this water body are needed regarding as it is inserted into a fragile ecosystem with dry season phenomenon, and the water of this river has extremely importance for the local economy

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Since centuries ago, the Asians use seaweed as an important source of feeding and are their greatest world-wide consumers. The migration of these peoples for other countries, made the demand for seaweed to increase. This increasing demand prompted an industry with annual values of around US$ 6 billion. The algal biomass used for the industry is collected in natural reservoirs or cultivated. The market necessity for products of the seaweed base promotes an unsustainable exploration of the natural banks, compromising its associated biological balance. In this context, seaweed culture appears as a viable alternative to prevent the depletion of these natural supplies. Geographic Information Systems (GIS) provide space and produce information that can facilitate the evaluation of important physical and socio-economic characteristics for the planning of seaweed culture. This objective of this study is to identify potential coastal areas for seaweed culture in the state of Rio Grande do Norte, from the integration of social-environmental data in the SIG. In order to achieve this objective, a geo-referred database composed of geographical maps, nautical maps and orbital digital images was assembled; and a bank of attributes including physical and oceanographical variables (winds, chains, bathymetry, operational distance from the culture) and social and environmental factors (main income, experience with seaweed harvesting, demographic density, proximity of the sheltered coast and distance of the banks) was produced. In the modeling of the data, the integration of the space database with the bank of attributes for the attainment of the map of potentiality of seaweed culture was carried out. Of a total of 2,011 ha analyzed by the GIS for the culture of seaweed, around 34% or 682 ha were indicated as high potential, 55% or 1,101 ha as medium potential, and 11% or 228 ha as low potential. The good indices of potentiality obtained in the localities studied demonstrate that there are adequate conditions for the installation of seaweed culture in the state of Rio Grande do Norte

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The mining industry is responsible for the generation of waste from their natural process of extraction. The mining impacts in urban areas are of special importance due to the high urban occupation, which are exacerbated due to the proximity of the mined areas and populated areas. Some solutions to wastedisposal have the potential to significantly reduce the environmental risks and liabilities, but represent higher costs in the stages of deployment and operation. The addition of mining waste as raw material in the development of commercial products reduces the environmental impacts, transforming the waste into a positive element in the generation of employment and income. This thesis studies the incorporation of waste iron ore in two clays, one from the ceramic industry of the City of Natal and the other from the ceramic industry of the Seridó Region, both in the State of Rio Grande do Norte, Brazil. Percentages of iron ore waste of 5%, 10% , 15%, 20%, 25% and 30% were used in the tested ceramic matrix. The two clays and the iron ore waste used as part of this investigation were characterized by X-ray diffraction tests, X-ray fluorescence tests, differential thermal analysis, thermogravimetric analysis and dilatometric analysis. The samples were sintered under temperatures of 850 °C, 950 °C and 1050°C at a heating rate of 5 °C/min with isotherms of two hours. The following tests were performed with the samples: linear shrinkage, water absorption, apparent porosity, apparent density, mass loss in fire and bending resistance in order to obtain their physical and mechanical properties. An amount of 5% of waste iron ore in the matrix clay at a temperature of 850 0C resulted in na increase of about 65% in the tensile strength of the clay samples from the Natal ceramic industry. A linear shrinkage of only 0.12% was observed for the samples, which indicates that the physical properties of the final product were not influenced by the addition of the waste

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The dielectric porcelain is usually obtained by mixing various raw materials proportions and is used in the production of electronic equipment for various applications, from capacitors of high and low Power to insulators for low, medium, high and extra high voltage, which are used in distribution lines and transmission of electricity.This work was directed to the s tudy of technological properties of technic porcelain, made from raw materials extracted from pegmatites found in the regions of Seridó and the Alto Oeste of Rio Grande do Norte, which are made of kaolin, quartz and feldspar, abundant and high quality in these regions. The technic ceramics were obtained by mixing in appropriate levels, kaolin, feldspar, quartz and clay, the last item from a pottery in the city of Sao Gonçalo do Amarante, Rio Grande do Norte. During the development the following characterizations correlated to raw materials were made: laser particle sizing, x-ray diffraction, DTA and TG. The compositions studied were formed by uniaxial pressing at a pressure of 50 MPa and sintered at temperatures ranging from 1150 to 1350ºC and levels (times) of sintering between 30, 60, 90 and 120 minutes. The characterization of the samples were taken from the analysis of weight loss, linear shrinkage, porosity, stoneware curve, bulk density, flexural strength of three points, SEM and X-ray diffraction, TMA, Dielectric and cross Resistivity. The studied materials can be employed in producing the objects used in electrical engineering such as: insulators for low, medium and high-voltage electrical systems, command devices, bushing insulation for transformers, power capacitors, spark plugs, receptacles for fluorescent and incandescent light bulbs and others

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Estuaries are environments prone to the input of chemical pollutants of various kinds and origins, including polycyclic aromatic hydrocarbons (PAHs). Anthropogenic PAHs may have two possible sources: pyrolytic (with four or more aromatic rings and low degree of alkylation) and petrogenic (with two and three aromatic rings and high degree of alkylation). This study aimed to evaluate the levels, distribution and possible sources of polycyclic aromatic hydrocarbons in the estuary of the Potengi river, Natal, Brazil. Samples of bottom sediments were collected in the final 12 km of the estuary until its mouth to the sea, where the urbanization of the Great Natal is more concentrated. Sampling was performed on 12 cross sections, with three stations each, totaling 36 samples, identified as T1 to T36. The non alkylated and alkylated PAHs were analyzed by gas chromatography coupled to mass spectrometry (GC / MS). PAHs were detected in all 36 stations with total concentration on each varying 174-109407 ng g-1. These values are comparable to those of several estuarine regions worldwide with high anthropogenic influence, suggesting the record of diffuse contamination installed in the estuary. PAHs profiles were similar for most stations. In 32 of the 36 stations, low molecular weight PAHs (with 2 and 3 ring: naphthalene, phenanthrene and their alkylated homologues) prevailed, which ranged from 54% to 100% of the total PAH, indicating that leaks, spills and combustion fuels are the dominant source of PAH pollution in the estuary. The level of contamination by PAHs in most stations suggests that there is potential risk of occasional adverse biological effects, but in some stations adverse impacts on the biota may occur frequently. The diagnostic ratios could differentiate sources of PAHs in sediments of the estuary, which were divided into three groups: petrogenic, pyrolytic and mixing of sources. The urban concentration of the Great Natal and the various industrial activities associated with it can be blamed as potential sources of PAHs in bottom sediments of the estuary studied. The data presented highlight the need to control the causes of existing pollution in the estuary

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The flowering is a physiological process that it is vital for plants. This physiological process has been well studied in the plant model Arabidopsis, but in sugarcane this process is not well known. The transition of the shoot apical meristem from vegetative to flowering is a critical factor for plant development. At Brazil northeastern region, the transition to flowering in sugarcane has an important effect as it may reduce up to 60% its production. This is a consequence of the sugar translocation from stalks to the shoot apical meristem which is necessary during the flowering process. Therefore, the aim of this work was to explore and analyze cDNAs previously identified using subtractive cDNA libraries. The results showed that these cDNAs showed differential expression profile in varieties of sugarcane (early x late flowering). The in silico analysis suggested that these cDNAs had homology to calmodulin, NAC transcription factor and phosphatidylinositol, a SEC14, which were described in the literature as having a role in the process of floral development. To better understand the role of the cDNA homologous to calmodulin, tobacco plants were transformed with overexpression cassettes in sense and antissense orientation. Plants overexpressing the cassette in sense orientation did not flowered, while plants overexpressing the cassette in the antissense orientation produced flowers. The data obtained in this study suggested the possible role from CAM sequence, SEC14 and NAC in the induction/floral development pathway in sugarcane, this is the first study in order to analyze these genes in the sugarcane flowering process.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Avaliou-se a variabilidade genética dos estoques de reprodutores e dos peixes jovens de Piaractus mesopotamicus de três pisciculturas do estado do Paraná, utilizadas no programa de aumento de estoque de peixes no rio Paranapanema. Foi utilizado o marcador RAPD para avaliar as amostras do estoque de reprodutores e dos peixes jovens das pisciculturas de Palotina, Cambará e Andirá. A porcentagem de fragmentos polimórficos e o índice de diversidade genética de Shannon dos estoques de reprodutores variaram de 75,0% a 71,4% e de 0,434 a 0,376, respectivamente. Os peixes jovens das pisciculturas apresentaram valores mais elevados para ambos os parâmetros, com exceção da piscicultura de Palotina, na qual o índice de diversidade genética de Shannon foi semelhante. Os estoques de reprodutores apresentaram alta variabilidade genética, e esta foi mantida nos peixes jovens.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This study to aimed investigate the community of ectoparasites associated with birds in the Mata do Olho D água, in the municipality of Macaíba, Rio Grande do Norte (RN), Brazil, its structure and the ambiental and hosts influential variables on it, and to verify microhabitats preferences by species of chewing lice and feather mites. We examined 172 individuals belonging to 38 species of Passeriformes and non-Passeriformes. 12 new geographic records are reported and 11 host-parasite associations not yet known for chewing lice and feather mites species. Significant relationship was found between the abundance of chewing lice and the variables total length (r = 0.29, p <0.05) and exposed culmen (r = 0.38, p <0.05) of the hosts. A principal component (PC1) accounted for 90.1% of the hosts morphological variation was significantly influential on the abundance of chewing lice (p <0.05), indicating that the morphological characteristics of the hosts may be positively influencing the abundance of these ectoparasites. Significantly higher frequency of individuals with high loads of chewing lice was detected during the dry period (x ² = 8.5, p <0.05), corroborating studies that propose that birds of arid environments suffer as much pressure as those of parasitic humid environments. Analyses of null models of co-occurrence and niche overlap showed a high degree of structure in the feather mites and chewing lice assemblies, when compared with other groups, and preferences in the use of microhabitats by taxa identified. These results corroborate ecological theories in host-parasite systems, contribute to the knowledge of ectoparasites associated with neotropical birds, and the need for experimental studies, as well as further deepening the biology of these arthropods

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Broadly anchored on Institutionalist literature this dissertation seeks to answer: Why rural credit granted to farming families in Rio Grande do Norte, Pronaf group B, has shown positive results in some territories while in others the same results are insatisfactory? Considering formal rules are the same, then why such results are so distinguished? This research supports the fact that these results are a direct consequence of the quality of institutions defined as longstanding social rules established and built in social interactions. For institutions one understands; organizational structures, formal and non-formal rules, social trust, thinking behaviors and its evolution as well as routines. Using Pronaf Rural Credit as a background this study measures and compares results obtained in the rural areas of Seridó, Sertão do Apodi, Mato Grande, Assú-Mossoró, Trairi, Potengi and Alto Oeste. The dimensions of measurement considered were: economics, social and guarantee of transparency. The study considers a sample of 402 Group B farming families. It also elaborates a socio-economic profile of these families in the considered areas and underlines the main causes for defaulted loans, difficulties to improve family income and results of access to Pronaf B credit line, as well as it proposes solutions to surpass obstacles to improve the efficiency of this credit line

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Family farming has been considered as the new axis of rural development in the country, the focus of several public policies, especially the National Program for Strengthening Family Agriculture - PRONAF and Food Purchase Program - PAA. PRONAF was created with the aim of providing credit to farmers, while the PAA to support family farmers through the purchase of its production. In this context, the objective of this study is to analyze the correspondence of these two public policies for family farming, in the Territories of Citizenship of the state of Rio Grande do Norte, between the years 2008 to 2010. In the methodology, the analysis was performed by comparing the distributions of the two programs in the territories of citizenship status. There were also statistical tests of differences in proportions, and Spearman correlations, and estimated a logit regression model, in order to measure the probability of a farmer participating in the PAA is associated with one of the modes of PRONAF. The data used were obtained from the National and Supply - CONAB at the Institute of Technical Assistance and Rural Extension - EMATER, and the Ministry of Agrarian Development - MDA. Among the key findings was noted that policies were associated with a direct, but low in the districts of the Territories of Citizenship. And that, in the years 2008 and 2009, only in the territories of Mato Grande, Alto Oeste and Seridó, the actions of PAA and PRONAF had direct and significant correlations. It was found that in most of the territories, policies are performed randomly, ie that both have no correlation to each other. The estimates of the logit model showed that the chance of a family farmer, the PAA participant, receive credits PRONAF A, is higher in the territory of Mato Grande, and would have a chance to fall in PRONAF B in all areas surveyed. Moreover, farmers in the territories of the Assu-Mossoró, Sertão of Apodi, Seridó and Alto Oeste, participating in the PAA would be more likely to receive credits PRONAF C, reflecting thus the family farm more consolidated these territories

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Systemic arterial hypertension is a multifactorial disease that contributes to the country´s high cardiovascular morbi-mortality rates. Considering that hypertension affects individuals in their most productive age while facing work and living risk factors, it is important to investigate its occurrence and predisposing factors in different occupational segments. The objective of this study was to identify the prevalence of hypertension among workers attended to in a medical service of a public university, their hypertension levels, the risk factors present, and their knowledge of the factors that influence the arterial pressure. The epidemiologic study was conducted in the Health Department of the Federal University of Rio Grande do Norte with 102 workers that sought care in the medical clinic during the months of March to May 2009. Data were collected by means of a questionnaire and measurements of systolic and diastolic arterial pressure (SAP and DAP) that were classified in stages according to the Brazilian Society of Hypertension and the degree of risk for cardiovascular events according to the criteria of the Brazilian Society for Cardiology. Data were analyzed using descriptive statistics. The workers were, on average, 54 years of age; the majority (67%) was male and had primary or middle educational level; they worked mainly in supplemental units and deanship offices conducting different functions such as security guards, administrative assistants, health auxiliaries and constructions workers; 48 (47%) of the workers identified themselves as hypertensive for 8 years on average, with the majority executing hard labor and administrative functions. Among the workers with hypertension, the number of the pressure levels classified as pre-hypertensive, stage I and II were: (12% in the SAP and 20% in the DAP); (16% in the SAP and 9% in the DAP); and (15% in the SAP and 5% in the DAP), respectively. The workers that did not identify themselves as hypertensive presented classifications with greater frequencies were: normal (16% in the SAP and 30% in the DAP); and pre-hypertensive (21% in the SAP and 16% in the DAP). The risk factors identified in more than 50% of the workers were: tobacco smoking, alcohol consumption and indices of being overweight, although physical activities are also present. Of the 48 workers diagnosed as hypertensive, those that had 5 risk factors present and limitrophic pressure levels (12%), in stage I hypertension (16%) and stage II hypertension (15¨%) were categorized as being in high risk for vascular events. The number of workers that indicated they had knowledge of the factors that influence their hypertension was less than 39% for each factor. It is concluded that there is a high prevalence of systemic arterial hypertension in the university workers, even amongst those already under treatment. They constitute a population at risk considering their age group, their work functions, and their inadequate life habits. Health care of these hypertensive workers that seek attention in the Health Department is an important aspect of the internal workers health policy in the institution. Educational interventions are recommended for the improvement of quality of life and of work in these workers

Relevância:

30.00% 30.00%

Publicador:

Resumo:

In recent debates about the issues of quality, the theme organizational culture and Six Sigma has appeared ever more frequently. In this context several authors suggest that the adoption of Six Sigma practices is influenced by culture. This work focuses on the relationship of organizational culture and quality to the practices of Six Sigma quality. Thus a descriptive-exploratory and correlational study of forty pharmacies of manipulation from Rio Grande do Norte was undertaken. Data collection identified features of companies and the level of use of the practices of Six Sigma quality that have been identified in the literature. For the Organizational Culture evaluation was used the Competitive Value Model (Cameron & Quinn, 1996), tested on north-American organizations and considered a high value academic and professional instrument. This model has been involved with the taximetrics created by Cameron who classifies quality culture in four levels. The results suggest that the Group and Developmental cultures are associated with higher levels of use of the practices of Six Sigma quality than the Rational and Hierarchical Cultures. Regarding the levels of the culture s quality, the highest levels were most frequently cited in Errors Prevention and Perpetual Improvement and Creativity, being the last one more positively related to the Six Sigma indicators

Relevância:

30.00% 30.00%

Publicador:

Resumo:

A avicultura de corte constitui-se numa importante atividade econômica no estado do Paraná e, como qualquer outra, está sujeita a riscos. Objetivou-se, neste trabalho, proceder à análise econômica da produção integrada de frango de corte, avaliando os riscos, considerando os sistemas climatizado, automático e manual. Utilizando-se as variáveis de risco: preço do produto, produtividade e custos de produção foi possível identificar as principais fontes de risco e sua influência na renda líquida. Os resultados apontaram que a rentabilidade da atividade é mais sensível aos componentes da receita do que de custos, sendo o preço a variável de maior sensibilidade. Verificou-se também que o aviário climatizado apresenta possibilidades de prejuízo mais alto para menores níveis de risco e, à medida que o risco aumenta, oferece retornos mais interessantes, em comparação aos sistemas automático e manual. O sistema manual foi o que passou a apresentar retorno a níveis de risco maior (acima de 25%).

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Traditional ceramics have an important role in the economy of Rio Grande do Norte. The local industries manufacture over 50 million shingles a month, corresponding to 60% of their overall production. As a result of processing flaws, roughly 20% of the production must be discarded, since little or no use has been envisaged for such fired components. Therefore, the use of this kind of residue, especially in the composition of other ceramic materials, comes as an interesting option from the economical and environmental point of view. In this scenario, the objective of the present study was to assess the effect of the addition of fired shingle waste in the composition of porcelainized stoneware tiles. To that end, two porcelainized stoneware tiles compositions were initially prepared. Subsequently, contents from 10 to 30% of roofing tiles chamote were added to each one of them. All raw materials and grog were characterized by FRX, XRD, and thermal analysis. The ceramics were fired using natural gas for 30 min at different temperatures, i.e. 1150, 1200 and 1250ºC, and fully characterized. The addition of roofing tiles chamote resulted in composition with superior properties compared to additive-free compositions. Porcelainized stoneware tiles products that fulfill required standards for practical applications were achieved

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The segment of the structural ceramics industry is one of the most important to the economy of Rio Grande do Norte. The supply chain makes a total of 206 companies that are distributed in 39 counties, concentrated in three regional centers: Seridó Apodi / Assu and great Natal. The ceramic industry in the state is around 80 million pieces per month, with 50,186 million of these tiles, which makes the Rio Grande do Norte one of the largest manufacturers of product in the Country. Different ceramic products can be manufactured by mixing two or more clays and accessory minerals. Mixtures acquire characteristics and form what is called the ceramic body. Refractory masses have a high melting point and thermal shock support. Its composition contains refractory clays with a little iron oxide and material fluxes. A line of semi-refractory ceramic products that stands out for its high added value are the bricks in ivory or red, used in building barbecues, fireplaces, wood stoves and braziers. The aim of this study was to use alumina-clay or silica- alumina-clay to the industrial RN, for the production of refractory bricks semi-refractory burning light. Clay and Kaolin were characterized for their chemical and mineralogical composition, immediately after ceramic bodies were made with different concentrations of the components, they were raised, pressed and sintered. After sintering the resulting products were characterized in terms of mechanical, thermal and dimensional than the characterization by X-ray diffraction and scanning electron microscopy. After obtaining the results, we concluded that the studied clay can be used for the production of semi-refractory bricks