Spatial patterns and driving forces of land use change in China during the early 21st century

Land use and land cover change as the core of coupled human-environment systems has become a potential field of land change science (LCS) in the study of global environmental change. Based on remotely sensed data of land use change with a spatial resolution of 1 km x 1 km on national scale among every 5 years, this paper designed a new dynamic regionalization according to the comprehensive characteristics of land use change including regional differentiation, physical, economic, and macro-policy factors as well. Spatial pattern of land use change and its driving forces were investigated in China in the early 21st century. To sum up, land use change pattern of this period was characterized by rapid changes in the whole country. Over the agricultural zones, e.g., Huang-Huai-Hai Plain, the southeast coastal areas and Sichuan Basin, a great proportion of fine arable land were engrossed owing to considerable expansion of the built-up and residential areas, resulting in decrease of paddy land area in southern China. The development of oasis agriculture in Northwest China and the reclamation in Northeast China led to a slight increase in arable land area in northern China. Due to the "Grain for Green" policy, forest area was significantly increased in the middle and western developing regions, where the vegetation coverage was substantially enlarged, likewise. This paper argued the main driving forces as the implementation of the strategy on land use and regional development, such as policies of "Western Development", "Revitalization of Northeast", coupled with rapidly economic development during this period.

Impacts of water conservancy and soil conservation measures on annual runoff in the Chaohe River Basin during 1961-2005

National Key Technology RD Program [2006BAD03A02]

Influence of the deposition energy on the composition and thermal cycling behavior of La-2(Zr0.7Ce0.3)(2)O-7 coatings

Lanthanum-zirconium-cerium composite oxide (La-2(Zr0.7Ce0.3)(2)O-7, LZ7C3) coatings were prepared under different conditions by electron beam-physical vapor deposition (EB-PVD). The composition, crystal structure, surface and cross-sectional morphologies, cyclic oxidation behavior of these coatings were studied. Elemental analysis indicates that the coating composition has partially deviated from the stoichiometry of the ingot, and the existence of excess La2O3 is also observed.

Effect of diffusion barrier on the high-temperature oxidation behavior of thermal barrier coatings

A selective oxidation technique has been applied to form a diffusion barrier on the Ni-based superalloy substrate by heating the substrate with electron beam of the electron beam-physical vapor deposition (EB-PVD) facility. The interdiffusion behavior, cross-sectional morphology, isothermal and cyclic oxidations were studied for thermal barrier coatings (TBCs) with and without diffusion barrier.

Double-ceramic-layer thermal barrier coatings of La2Zr2O7/YSZ deposited by electron beam-physical vapor deposition

Double-ceramic-layer(DCL) thermal barrier coatings (TBCs) of La2Zr2O7 (LZ) and yttria stabilized zirconia (YSZ) were deposited by electron beam-physical vapor deposition (EB-PVD). The composition, crystal structure, surface and cross-sectional morphologies and cyclic oxidation behavior of the DCL coating were studied. Both the X-ray diffraction (XRD) and thermogravimetric-differential thermal analysis (TG-DTA) prove that LZ and YSZ have good chemical applicability to form a DCL coating. The thermal cycling test at 1373 K in an air furnace indicates the DCL coating has a much longer lifetime than the single layer LZ coating. and even longer than that of the single layer YSZ coating. The failure of the DCL coating is a result of both the bond coat oxidation and the thermal strain between bond coat and ceramic layer generated by the thermal expansion mismatch.

Adhesive strength of new thermal barrier coatings of rare earth zirconates

La2Zr2O7 (LZ) and La-2(Zr0.7Ce0.3)(2)O-7 (LZ7C3) as novel candidate materials for thermal barrier coatings (TBCs) were prepared by electron beam-physical vapor deposition (EB-PVD). The adhesive strength of the as-deposited LZ and LZ7C3 coatings were evaluated by transverse scratch test. Meanwhile, the factors affecting the critical load value were also investigated. The critical load value of LZ7C3 coating is larger than that of LZ coating, whereas both values of these two coatings are lower than that of the traditional coating material, i.e. 8 wt% yttria stabilized zirconia (8YSZ). The micro-cracks formed in the scratch channel can partially release the stress in the coating and then enhance the adhesive strength of the coating. The width of the scratch channel and the surface spallation after transverse scratch test are effective factors to evaluate the adhesive strength of LZ and LZ7C3 coatings.

Preparation and characterization of La2Zr2O7 coating with the addition of Y2O3 by EB-PVD

Thermal barrier coatings (TBCs) of La2Zr2O7 (LZ) with the addition of 3 wt.% Y2O3 (LZ3Y) were deposited by electron beam-physical vapor deposition (EB-PVD). The phase stabilities, thermophysical and mechanical properties, and chemical compositions of these ceramics and coatings were studied in detail. The phase stability and thermal expansion behavior of LZ3Y bulk material are identical to those of LZ bulk material, but the mechanical properties of the former are superior to those of the latter. Elemental analysis and X-ray diffraction indicate that compositional deviation of LZ coating can be optimized after doping by 3 wt.% Y2O3, Y2O3 acts as a dopant as well as a process regulator. The optimal composition of LZ3Y coating could be effectively achieved by the addition of excess Y2O3 into the ingot and by properly controlling the current of electron beam (i.e. similar to 650 mA).

Thermal barrier coating of lanthanum-zirconium-cerium composite oxide made by electron beam-physical vapor deposition

Lanthanum-zirconium-cerium composite oxide (La-2(Zr0.7Ce0.3)(2)O-7, LZ7C3) as a candidate material for thermal barrier coatings (TBCs) was prepared by electron beam-physical vapor deposition (EB-PVD). The composition, crystal structure, thermophysical properties, surface and cross-sectional morphologies and cyclic oxidation behavior of the LZ7C3 coating were studied. The results indicated that LZ7C3 has a high phase stability between 298 K and 1573 K, and its linear thermal expansion coefficient (TEC) is similar to that of zirconia containing 8 wt% yttria (8YSZ). The thermal conductivity of LZ7C3 is 0.87 W m(-1) K-1 at 1273 K, which is almost 60% lower than that of 8YSZ. The deviation of coating composition from the ingot can be overcome by the addition of excess CeO2 and ZrO2 during ingot preparation or by adjusting the process parameters.

高效液相色谱-电喷雾质谱联用分析红参与五味子配伍机制

目的研究红参与五味子配伍过程中人参皂苷类化合物的变化机制。方法采用高效液相色谱-电喷雾质谱联用技术对红参与五味子5种配伍比例水煎液中人参皂苷的变化进行了研究。结果在五味子量较少的条件下,红参与五味子水煎液中人参皂苷Rg1、Re、Rb1、Rc、Rb2、Rd发生水解。随着五味子量的增加,人参皂苷Ro的量发生减少,而人参微量次级皂苷F2的量显著增加。结论红参与五味子配伍后产生的特殊药效可能与两者配伍过程中人参皂苷F2的量显著增加有关。

A novel 2D arsenic vanadate network grafted with a transition metal complex: [Cu(phen)][(VV4As2O19)-V-IV-As-V]center dot 0.5H(2)O

A novel organic-inorganic hybrid compound [Cu(phen)](2)[(VV4As2O19)-V-IV-As-V-O-V].0.5H(2)O 1 has been hydrothermally synthesized. Its structure, determined by single crystal X-ray diffraction, exhibits an unusual two-dimensional arsenic vanadate layered network grafted with the [Cu(phen)](2+) complex. The chelating phen ligands project perpendicularly beyond the inorganic layer. Variable temperature magnetic susceptibility studies indicate that both ferro- and antiferro-magnetic interactions exist in 1.

Novel two-dimensional sodium molybdenum phosphates containing {M(enMe)(2)}(2+) bridging groups (M = Ni, Cu; enMe=1,2-diaminopropane)

Two novel organic-inorganic hybrid compounds, (H(2)enMe)(4)(H3O)[Ni(enMe)(2)].[Na3Mo12O52P8(OH)(10)].5H(2)O (1) and (H(2)enMe)(4)(H3O)[Cu(enMe)(2)].[Na3Mo12O52P8(OH)(10)].5H(2)O (2) (enMe = 1,2-diaminopropane), have been hydrothermally synthesized and characterized by elemental analyses, IR, EPR, XPS, UV-Vis spectra and TG analyses. Single crystal X-ray diffraction shows that 1 and 2 are isostructural compounds. Both the compounds exhibit an unusual two-dimensional (2-D) window-like network consisting of one-dimensional (1-D) chains of sodium molybdenum phosphate anions connected by transition metal coordination complexes cations. Compound 1 and 2 represent the first 2-D molybdenum phosphate skeleton pillared by transition metal complex fragments.

人参四逆汤抗休克作用的有效组分成分分析

分析人参四逆汤抗失血性休克作用的提取组分 S- 1和 S- 7的组成成分。方法　结合硅胶色谱柱分离 ,利用 ESI/MSn、MAL DI- TOF/MS等技术分析鉴定 S- 1和 S- 7的化学成分。结果　从人参四逆汤水煎液的抗休克作用的有效组分 S- 7中分析和鉴定了人参皂苷 - Ra1 、- Ra2 、- Rb1 、- Rb2 、- Rb3、- Rc、- Rd、- Re、- Rg1 、- Rg2 、- Rg3、- Rf等 12种人参皂苷 ;从有效组分 S- 1中检出下列二萜生物碱成分 :苯甲酰次乌头碱油酸酯 (14 - benzoylhypaconine- 8-linoleate,HAL )、苯甲酰去氧乌头碱油酸酯 (14 - benzoyldeoxyaconine- 8- oleate,HAO )、苯甲酰次乌头碱棕榈酸酯(14 - benzoylhypaconine- 8- palmitate,HAP)、苯甲酰中乌头碱 (benzoylmesaconitine,BM)、苯甲酰乌头碱 (benzoyla-conitine,BA)、苯甲酰次乌头碱 (benzoylhypaconitine,BH)。结论...

人参四逆汤生物碱和皂苷成分的研究

研究人参四逆汤的有效成分。方法 :利用软电离质谱技术 ,对人参四逆汤的有效成分进行鉴定。结果 :从人参四逆汤水煎液中分析和鉴定了人参皂苷Ra1,Ra2 ,Rb1,Rb2 ,Rb3 ,Rc ,Rd ,Re,Rg1,Rg2 ,Rg3 ,Rf等 12种人参皂苷 ;苯甲酰中乌头碱 (BM )、苯甲酰乌头碱 (BA)、苯甲酰次乌头碱 (BH)、尼奥灵 (NL)、附子灵 (FL)、14 乙酰基塔拉地萨敏 (AT)、苯甲酰次乌头碱亚油酸酯 (HAL)、苯甲酰去氧乌头碱亚油酸酯 (HAO)、苯甲酰次乌头碱棕榈酸酯 (HAP)、塔拉地萨敏 (TS)等 10种二萜生物碱。结论 :含有脂肪酸酯型生物碱的提取组分具有抗休克作用 ,含有人参皂苷的提取组分具有明显的负性肌力作用。

The crystal structure and supramolecular chain of [La(NO3)(3)(OH2)(2)(phen)]center dot 15-crown-5

[La(NO3)(3)(OH2)(2)(phen)]. 15-crown-5 is hexagonal, P6(5), with a = 10.955(2), c = 43.769(9) Angstrom, and D-calc = 1.668 g cm(-3) for Z = 6. In the complex, two nitrogen atoms (from phen) and eight oxygen atoms (six from three bidentate nitrate anions and two from water molecules) are coordinated to the central La(III) ion, forming a coordination polyhedron which is approximately a bicapped square antiprism. The coordinated water molecules donate hydrogen bonds to the oxygen atoms of the crown ether, forming polymeric hydrogen bonded chains which wrap helically along the unit cell direction c.

THE SYNTHESIS AND CRYSTAL-STRUCTURE OF [LA(OH2)(5)(PHEN)(2)]CL-3-CENTER-DOT-4H(2)O-CENTER-DOT-PHEN

[La(OH2)(5)(phen)(2)]Cl-3 4H(2)O.phen is centric, Pnna, with a = 19.946(7), b = 16.458(5), c = 12.207(4)Angstrom and D-calc = 1.57 g cm(-3) for Z = 4. The La(III) ion resides on a crystallographic twofold axis and is coordinated to four nitrogen atoms (fr