Protected maleimide building blocks for the decoration of peptides, peptoids and peptide nucleic acids

Monomers allowing for the introduction of [2,5-dimethylfuran]-protected maleimides into polyamides such as peptides, peptide nucleic acids, and peptoids were prepared, as well as the corresponding oligomers. Suitable maleimide deprotection conditions were established in each case. The stability of the adducts generated by Michael-type maleimide-thiol reaction and Diels-Alder cycloaddition to maleimide deprotection conditions was exploited to prepare a variety of conjugates from peptide and PNA scaffolds incorporating one free and one protected maleimide. The target molecules were synthesized by using two subsequent maleimide-involving click reactions separated by a maleimide deprotection step. Carrying out maleimide deprotection and conjugation simultaneously gave better results than performing the two reactions subsequently.

Estimativa da entalpia reticular (Dm Hmº) de adutos através de termogravimetria: uso de uma equação empírica

An empirical equation: DMHmº = t i/b (where t i is the Kelvin temperature of the beginning of the thermal decomposition obtained from the thermogravimetry of the adducts; b is an empirical parameter wich depends on the metal halide and on the number of ligands) was obtained and tested for 53 adducts MX2.nL (where MX2 is a metal halide from the zinc group). The difference between experimental and calculated values was less than 6% for 22 adducts. To another 22 adducts, that difference was less than 10%. Only for 4 compounds the difference between experimental and calculated values exceeds 15%.

Estudo cinético por TG e DSC da decomposição térmica de alguns adutos de haletos de cádmio

By DSC data, the kinetical parameters Ea , n and A were calculated for the thermal decomposition of the adducts CdCl2.2dmf, CdCl2.dmf and CdBr2.dmf (dmf= dimethylformamide) by using Rogers and Smith method. The found values were : Ea = 85, 176 and 101 kJ mol-1 , n= 0.23, 0.25, and 0.17, A= 2.40x10(9), 1.89x10(19) and 1.07x10(9) respectively. By TGA data, the kinetical patameters for the thermal decomposition of the adduct CdCl2.1,5 dmeu (dmeu=dimethylethyleneurea) were calculated by using five different methods.

Estimativa da entalpia de decomposição (deltaD Hmº) de adutos por termogravimetria

An empirical equation: deltaD HmO = t i/2.2(2-n) is obtained and tested for 102 adducts (mainly adducts with zinc group halides). In the equation, t i is the Kelvin temperature of the beginning of the thermal decomposition of the adduct, (obtained by thermogravimetry), and n is the number of ligands. For 1/3 of the tested adducts the difference between experimental and calculated values was less than 5%. For about 1/3 of the adducts that difference exceeds 15%.

Estimativa da entalpia reticular de adutos (DM Hm o ) utilizando-se formas modificadas da equação de Kapustinskii

In this work are presented two modified forms of Kapustinskii equation that could be used to estimate the values of the lattice enthalphies for adducts: DM Hm o=(-n.z+ .z- .10(2)/D).(1-d*/D) .K and DM Hm o=(-n.z+ .z-.10(2)/d).(1-d*/d).K.d. Two new parameters related with steric effects and donor power of the ligands, J anddare introduced. The proposed equations were tested for 49 adducts (mainly from the zinc group halides). The difference between experimental (calorimetric) and calculated values (using the proposed equations) values are less than 5% for 41 of the tested adducts.

Entalpia reticular, entalpia de fusão e temperatura de fusão de adutos: algumas correlações empíricas utilizando DSC

By using DSC data is shown that there are empirical correlations between lattice enthalpy, melting enthalpy and the temperature of melting for adducts, and that is possible, using only a single DSC curve, estimate the value of DM Hmq.

Termoquímica na Unicamp: depoimento sobre uma jornada de 25 anos

This article describes the progress of a group of investigation on thermochemistry, which started in 1972. A homemade calorimeter was employed to provide quantitative support to the information on interative effect between lanthanide cations and halides or pseudohalides, in non-aqueous solvents, previously derived from conductometric titrations. However, the features of this instrument were not able to detect the thermal effects. Therefore, the great input to the group came from the acquisition of an LKB commercial apparatus, by the University in 1975. Considering the historical development of the coordination chemistry in Brazil, which was previously dedicated to strutural features of adducts, without focusing the energetic envolved in any coordinationcompound. Since starting the thermochemistry study, numerous masters and doctoral thesis covering more than a hundred adducts and a reasonable number of chelates, were presented systematizing data in order to understand the behavior of this kind of coordination compounds (C. Airoldi and A. P. Chagas, Coord. Chem. Rev. 1992, 119, 29). This knowledge enabled an extension of the study to include some heterogeneous systems formed by natural or synthetic materials like immobilized silica gel, lamellar phosphate, phosphonate or sulphate compounds, clays, polysaccharides, chrysotile, soils, etc. Many students are now engaged as staff members in Universities, Research Instituitions or other private institutions, developing many activities. Due to a multiplying effect on the formation of researchers, the group is now reaching the fourth generation.

Synthesis and characterization of oxovanadium (IV) dithiocarbamates with pyridine

We report the synthesis and study of a new series of oxovanadium (IV) dithiocarbamate adducts and derivatives with pyridine and cyclohexyl, di-iso-butyl, di-n-propyl, anilin, morpholin, piperidin and di-iso-propyl amines. The complexes have been characterized by analytical, magnetochemical, IR, visible-UV spectral and thermal studies, and are assigned the formulas [VO(L)2].py, where L=cyclohexyl, di-iso-butyl, di-n-propyl, anilin dithiocarbamate and [VO(OH)(L)(py)2]OH.H2O (L=morpholin, piperidin and di-iso-propyl dithiocarbamate). The effect of the adduct formation on the pV=0 bound is discussed in terms of the IR (V=O, V-S and V-N stretching frequencies) and electronic spectra (d-d transitions).

Danos ao DNA promovidos por ácido 5-aminolevulínico: possível associação com o desenvolvimento de carcinoma hepatocelular em portadores de porfiria aguda intermitente

5-Aminolevulinic acid (ALA) is a heme precursor accumulated in acute intermittent porphyria (AIP), which might be associated with hepatocellular carcinoma (HCC) in symptomatic patients. Under metal catalyzed oxidation, ALA and its cyclic dimerization product, 3,6-dihydropyrazine-2,5-dipropanoic acid, produce reactive oxygen species that damage plasmid and calf thymus DNA bases, increase the steady state level of 8-oxo-7,8-dihydro-2´-deoxyguanosine in liver DNA and promote mitochondrial DNA damage. The final product of ALA, 4,5-dioxovaleric acid (DOVA), is able to alkylate guanine moieties, producing adducts. ALA and DOVA are mutagenic in bacteria. This review shows an up-to-date literature data that reinforce the hypothesis that the DNA damage induced by ALA may be associated with the development of HCC in AIP patients.

Formação de multicamadas de polissacarídeos e proteína

In this work the formation of multilayers composed by carboxymethylcellulose (CMC), chitosane and bovine serum albumin (BSA) was studied by ellipsometry. First, the adsorption behavior of carboxymethylcellulose onto amino-terminated surfaces was investigated as a function of molecular weight and average degree of substitution of CMC. The influence of these parameters on the adsorbed amount of CMC onto amino-terminated substrates was absent. However, the interaction of CMC covered surfaces with chitosane and BSA was favored when the average degree of substitution of CMC was increased. The adsorption of BSA onto the polysaccharide systems was studied as a function of pH. At the isoelectric point of BSA a maximum in the adsorbed amount was found.

Gas-phase ion chemistry of silyl cations obtained from hexamethyldisilazane

The gas-phase ion-molecule reactions of the Me3SiN(H)SiMe2+ ion, obtained by electron ionization from Me3SiN(H)SiMe3, have been studied in a Fourier transform ion cyclotron resonance spectrometer in order to understand the mechanistic details of an important chemical system presently used in film formation. This silyl cation has been observed to undergo addition reactions at electron rich centers to form stable adducts that may undergo further methane elimination in the case of alcohols and amines. The most important feature of these reactions is the fact that a metathesis type reaction can be observed in the presence of H2O, and other hydrogen labile substrates like alcohols, leading to the formation of the corresponding oxygen-containing ion, i.e. Me3SiOSiMe2+. For alcohols (ROH), facile formation of a tertiary product ion, presumably corresponding to an Me3Si-O-Si(Me)=O+-R structure with elimination of an amine reveals the strong tendency of these nitrogen-containing ions to undergo metathesis type reactions with oxygen containing substrates.

Formação de adutos exocíclicos com bases de DNA: implicações em mutagênese e carcinogênese

A number of ring-extended DNA adducts resulting from reaction of alpha,beta-unsaturated aldehydes, or their epoxides, with DNA bases have been characterized in recent years. These adducts can lead to miscoding during DNA replication which, if not repaired, result in mutations that can contribute to cancer development. Recently, the use of ultrasensitive methods allowed the detection of background levels of etheno DNA adducts in tissues of untreated animals and humans suggesting the existence of endogenous sources of reactive intermediates. In this review, we briefly summarize the recent advances in the chemistry of these DNA lesions.

Efeito do polietilenoglicol e da albumina na imobilização de lipase microbiana e na catálise em meio orgânico

Poly (ethylene) glycol (PEG) and bovine serum albumin (BSA), as additive agents, were used to enhance the activity of immobilized microbial lipase in organic solvent. Controlled pore silica (CPS) was selected as matrix and different immobilization procedures were evaluated: directly lipase binding on CPS and simultaneous addition of lipase and additive agent on the same support. The highest coupling yield (59.6%) was attained when the immobilization procedure was performed at lipase loading of 150 U/g support in the presence of PEG-1.500. This immobilized system was used in esterification reactions under repeated batch cycles and the biocatalyst half-life was found to increase 2.7 times when compared with the control.

Determinação eletroanalítica de corante reativo presente como contaminante em proteínas purificadas por cromatografia de afinidade

Procion Green HE-4BD is a reactive dye currently used in affinity purification, and commonly present as a contaminant in the final biological preparation. An assay method is described to determine trace amounts of the dye in the presence of human serum albumin(HSA) and leakage from agarose as affinity sorbent by cathodic stripping voltammetry. The proposed method is based on the reductive peak at -0.55V in B-R buffer pH 3 (E=0V and t= 240s), obtained when samples of HSA 2% (m/v) containing dye concentrations in sodium hydroxide pH 12 are submitted to a heating time of 330 min at 80 ºC. Linear calibration curves can be obtained for RG19 dye concentrations from 5x10-9 mol L-1 to 8 x10-8 mol L-1. The detection limit (3sigma) is 1x10-9 mol L-1.

Comparative effects of macro-sized aluminum oxide and aluminum oxide nanoparticles on erythrocyte hemolysis: influence of cell source, temperature and size

Al2O3 is the most abundantly produced nanomaterial and has been used in diverse fields, including the medical, military and industrial sectors. As there are concerns about the health effects of nanoparticles, it is important to understand how they interact with cells, and specifically with red blood cells. The hemolysis induced by three commercial nano-sized aluminum oxide particles (nanopowder 13 nm, nanopowder <50 nm and nanowire 2-6 nm × 200-400 nm) was compared to aluminum oxide and has been studied on erythrocytes from humans, rats and rabbits, in order to elucidate the mechanism of action and the influence of size and shape on hemolytic behavior. The concentrations inducing 50% hemolysis (HC50) were calculated for each compound studied. The most hemolytic aluminum oxide particles were of nanopowder 13, followed by nanowire and nanopowder 50. The addition of albumin to PBS induced a protective effect on hemolysis in all the nano-forms of Al2O3, but not on Al2O3. The drop in HC50 correlated to a decrease in nanomaterial size, which was induced by a reduction of aggregation Aluminum oxide nanoparticles are less hemolytic than other oxide nanoparticles, and behave differently depending on the size and shape of the nanoparticles. The hemolytic behavior of aluminum oxide nanoparticles differs from that of aluminum oxide.