A new rapidly absorbed paracetamol tablet containing sodium bicarbonate. II. Dissolution studies and in vitro/in vivo correlation

The objective of this study was to compare the in vitro dissolution profile of a new rapidly absorbed paracetamol tablet containing sodium bicarbonate (PS) with that of a conventional paracetamol tablet (P), and to relate these by deconvolution and mapping to in vivo release. The dissolution methods used include the standard procedure described in the USP monograph for paracetamol tablets, employing buffer at pH5.8 or 0.05 M HCl at stirrer speeds between 10 and 50 rpm. The mapping process was developed and implemented in Microsoft Excel® worksheets that iteratively calculated the optimal values of scale and shape factors which linked in vivo time to in vitro time. The in vitro-in vivo correlation (IVIVC) was carried out simultaneously for both formulations to produce common mapping factors. The USP method, using buffer at pH5.8, demonstrated no difference between the two products. However, using an acidic medium the rate of dissolution of P but not of PS decreased with decreasing stirrer speed. A significant correlation (r=0.773; p<.00001) was established between in vivo release and in vitro dissolution using the profiles obtained with 0.05 M HCl and a stirrer speed of 30 rpm. The scale factor for optimal simultaneous IVIVC in the fasting state was 2.54 and the shape factor was 0.16; corresponding values for mapping in the fed state were 3.37 and 0.13 (implying a larger in vitro-in vivo time difference but reduced shape difference in the fed state). The current IVIVC explains, in part, the observed in vivo variability of the two products. The approach to mapping may also be extended to different batches of these products, to predict the impact of any changes of in vitro dissolution on in vivo release and plasma drug concentration-time profiles.

Investigating the supply and demand relationship in a profession: the English and Welsh schools of librarianship and information Studies and the Higher Education Library and Information Services employment sector in England and Wales.

Concern has been expressed in the professional literature - borne out by professional experience and observation - that the supply and demand relationship existing between the 13 English and Welsh Library and Information Studies (LIS) Schools (as providers of `First Professional' staff) and the Higher Education Library and Information Services (HE LIS) sector of England and Wales (as one group of employers of such staff) is unsatisfactory and needs attention. An appropriate methodology to investigate this problem was devised. A basic content analysis of Schools' curricular and recruitment material intended for public consumption was undertaken to establish an overview of the LIS initial professional education system in England and Wales, and to identify and analyse any covert messages imparted to readers. This was followed by a mix of Main Questionnaires and Semi-Structured Interviews with appropriate populations. The investigation revealed some serious areas of dissatisfaction by the HE LIS Chiefs with the role and function of the Schools. Considerable divergence of views emerged on the state of the working relationships between the two sectors and on the Schools' successes in meeting the needs of the HE LIS sector and on CPD provision. There were, however, areas of substantial and consistent agreement between the two sectors. The main implications of the findings were that those areas encompassing divergence of views were worrying and needed addressing by both sides. Possible ways forward included recommendations on improving the image of the profession purveyed by the Schools; the forming of closer and more effective inter-sectoral relationships; recognising fully the importance of `practicum' and increasing and sustaining the network of `practicum' providers.

Fibre optic sensors for high speed hypervelocity impact studies and low velocity drop tests

The initial aim of this project was to develop a non-contact fibre optic based displacement sensor to operate in the harsh environment of a 'Light Gas Gun' (LGG), which can 'fire' small particles at velocities ranging from 1-8.4 km/s. The LGG is used extensively for research in aerospace to analyze the effects of high speed impacts on materials. Ideally the measurement should be made close to the centre of the impact to minimise corruption of the data from edge effects and survive the impact. A further requirement is that it should operate at a stand-off distance of ~ 8cm. For these reasons we chose to develop a pseudo con-focal intensity sensor, which demonstrated resolution comparable with conventional PVDF sensors combined with high survivability and low cost. A second sensor was developed based on 'Fibre Bragg Gratings' (FBG) which although requiring contact with the target the low weight and very small contact area had minimal effect on the dynamics of the target. The FBG was mounted either on the surface of the target or tangentially between a fixed location. The output signals from the FBG were interrogated in time by a new method. Measurements were made on composite and aluminium plates in the LGG and on low speed drop tests. The particle momentum for the drop tests was chosen to be similar to that of the particles used in the LGG.

Financial liberalization and stock market volatility:the case of Indonesia

This article examines the relationship between financial liberalization and stock market volatility in Indonesia. By looking at the time series properties of the Jakarta Composite Index (JCI) we identify breaks in stock market volatility which coincide with the timing of major policy events. Our main findings are (i) a significant decrease in volatility after the 'official' opening of the stock market to foreign participation; (ii) a significant increase in volatility in the year before market opening following reforms that eased entry requirements and the issuance of brokerage licenses and (iii) a significant increase in volatility at the time of the Asian crisis followed by a significant decrease in the second and sixth years after the crisis.

Master and apprentice or difference and complementarity? Local government practioners, doctoral studies and co-produced research

In their search for innovative policy solutions to complex social problematics, local governance practitioners will look to synergising specific policy guidance from government departments with conceptual scientific research outputs. UK academics are also now expected to emphasise the relevance of their research and to increase its utilisation by practitioners. Away from utilitarian pressures, academics from applied discipline, such as Public Administration and Local Government Studies are increasingly drawn to the benefits of co-produced research. Despite the pressure for more co-research there are few opportunities for practitioners and academics to nurture relationships that would support close collaboration. This paper looks at the opportunity for closer collaboration when practitioners undertake research degrees, in order to enhance their cognitive skills and develop greater scientific knowledge of particular policy domains. If this route to closer collaboration is to succeed, it will require academics to think differently about their relationship with practitioner-students.

The effects of ownership and stock liquidity on the timing of repurchase transactions

We analyze detailed monthly data on U.S. open market stock repurchases (OMRs) that recently became available following stricter disclosure requirements. We find evidence that OMRs are timed to benefit non-selling shareholders. We present evidence that the profits to companies from timing repurchases are significantly related to ownership structure. Institutional ownership reduces companies' opportunities to repurchase stock at bargain prices. At low levels, insider ownership increases timing profits and at high levels it reduces them. Stock liquidity increases profits from timing OMRs.

Risk and benefit assessment for Tolcapone in the treatment of Parkinson's disease

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Social movement studies, Social movement studies, and the challenges of Parochialism:a rejoinder to Poulson, Caswell and Gray

In this short rejoinder, I briefly contextualise and discuss the implications of Poulson, Caswell and Gray's article for Social Movement Studies. © 2014 Taylor & Francis.

Fibre optic sensors for high speed hypervelocity impact studies and low velocity drop tests

The initial aim of this project was to develop a non-contact fibre optic based displacement sensor to operate in the harsh environment of a 'Light Gas Gun' (LGG), which can 'fire' small particles at velocities ranging from 1-8.4 km/s. The LGG is used extensively for research in aerospace to analyze the effects of high speed impacts on materials. Ideally the measurement should be made close to the centre of the impact to minimise corruption of the data from edge effects and survive the impact. A further requirement is that it should operate at a stand-off distance of ~ 8cm. For these reasons we chose to develop a pseudo con-focal intensity sensor, which demonstrated resolution comparable with conventional PVDF sensors combined with high survivability and low cost. A second sensor was developed based on 'Fibre Bragg Gratings' (FBG) which although requiring contact with the target the low weight and very small contact area had minimal effect on the dynamics of the target. The FBG was mounted either on the surface of the target or tangentially between a fixed location. The output signals from the FBG were interrogated in time by a new method. Measurements were made on composite and aluminium plates in the LGG and on low speed drop tests. The particle momentum for the drop tests was chosen to be similar to that of the particles used in the LGG.

Students’ Digital Archive at the State University of Library Studies and Information Technologies, Sofia

The paper describes the creation and content of the digital archive of photographs, films and materials from fieldwork (interviews, surveys, and observations) of students from the Information Funds of the Cultural and Historical Heritage program at the State University of Library Studies and Information Technologies, Sofia, Bulgaria. The text discusses the educational opportunities of the archive, and the plans for publishing it as CD and for conversion into an electronic archive on the Internet.

Wound healing studies and interfacial phenomena:use and relevance of the corneal model

The interaction of the wound dressing as a biomaterial with the wound bed is the central issue of this chapter. The interfacial phenomenon that encompasses the biological and biochemical consequences that arise when a biomaterial is introduced to a host biological environment is discussed. A great deal can be learned from observations arising from the behaviour of biomaterials at other body sites; one particularly relevant body site in the context of wound healing is the anterior eye. The cornea, tear film and posterior surface of the contact lens provide an informative model of the parallel interface that exists between the chronic wound bed, wound fluid and the dressing biomaterial. © 2011 Woodhead Publishing Limited All rights reserved.

Trichloroethylene fate and transport studies and biodegradation kinetics in the saturated zone

Permeable reactive barriers (PRB) are constructed from soil solid amendments to support the growth of bacteria that are capable of degrading organic contaminants. The objective of this study was to identify low-cost soil solid amendments that could retard the movement of trichloroethylene (TCE) while serving as long-lived carbon sources to foster its biodegradation in shallow groundwater through the use of a PRB. The natural amendments high in organic carbon content such as eucalyptus mulch, compost, wetland peat, organic humus were compared based on their geophysical characteristics, such as pHw, porosity and total organic carbon (TOC), and as well as TCE sorption potentials. The pHw values were within neutral range except for pine bark mulch and wetland peat. All other geophysical characteristics of the amendments showed suitability for use in a PRB. While the Freundlich model showed better fit for compost and pine bark mulch, the linear sorption model was adequate for eucalyptus mulch, wetland peat and Everglades muck within the concentration range studied (0.2-0.8 mg/L TCE). According to these results, two composts and eucalyptus mulch were selected for laboratory column experiments to evaluate their effectiveness at creating and maintaining conditions suitable for TCE anaerobic dechlorination. The columns were monitored for pH, ORP, TCE degradation, longevity of nutrients and soluble TOC to support TCE dechlorination. Native bacteria in the columns had the ability to convert TCE to DCEs; however, the inoculation with the TCE-degrading culture greatly increased the rate of biodegradation. This caused a significant increase in by-product concentration, mostly in the form of DCEs and VC followed by a slow degradation to ethylene. Of the tested amendments eucalyptus mulch was the most effective at supporting the TCE dechlorination. The experimental results of TCE sequential dechlorination took place in eucalyptus mulch and commercial compost from Savannah River Site columns were then simulated using the Hydrus-1D model. The simulations showed good fit with the experimental data. The results suggested that sorption and degradation were the dominant fate and transport mechanisms for TCE and DCEs in the column, supporting the use of these amendments in a permeable reactive barrier to remediate the TCE.

Design and performance assessment of aortic heart valve for tissue engineering

Current artificial heart valves are classified as mechanical and bioprosthetic. An appealing pathway that promises to overcome the shortcomings of commercially available heart valves is offered by the interdisciplinary approach of cardiovascular tissue engineering. However, the mechanical properties of the Tissue Engineering Heart Valves (TEHV) are limited and generally fail in the long-term use. To meet this performance challenge novel biodegradable triblock copolymer poly(ethylene oxide)-polypropylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO or F108) crosslinked to Silk Fibroin (F108-SilkC) to be used as tri-leaflet heart valve material was investigated. ^ Synthesis of ten polymers with varying concentration and thickness (55 µm, 75 µm and 100 µm) was achieved via a covalent crosslinking scheme using bifunctional polyethylene glycol diglycidyl ether (PEGDE). Static and fatigue testing were used to assess mechanical properties of films, and hydrodynamic testing was performed to determine performance under a simulated left ventricular flow regime. The crosslinked copolymer (F108-Silk C) showed greater flexibility and resilience, but inferior ultimate tensile strength, by increasing concentration of PEGDE. Concentration molar ratio of 80:1 (F108: Silk) and thickness of 75 µm showed longer fatigue life for both tension-tension and bending fatigue tests. Four valves out of twelve designed satisfactorily complied with minimum performance requirement ISO 5840, 2005. ^ In conclusion, it was demonstrated that the applicability of a degradable polymer in conjugation with silk fibroin for tissue engineering cardiovascular use, specifically for aortic valve leaflet design, met the performance demands. Thinner thicknesses (t<75 µm) in conjunction with stiffness lower than 320 MPa (80:1, F108: Silk) are essential for the correct functionality of proposed heart valve biomaterial F108-SilkC. Fatigue tests were demonstrated to be a useful tool to characterize biomaterials that undergo cyclic loading. ^