Leprosy and pregnancy: detection coefficient and proposal for a new index

Introduction Our study presents a method to generate a novel detection coefficient for the association between leprosy and pregnancy (DCLP). Methods The DCLP was calculated for women from the State of Pará (2007-2009), Brazil. Data were ordered, divided into five equal parts (corresponding to the P20, P40, P60, and P80 percentiles), and classified as low, medium, high, very high, or hyperendemic. Results Using the new index, we established the DCLP parameters for low (<0.36), medium (0.36-0.69), high (0.70-1.09), very high (1.10-1.50), and hyperendemic (>1.50). Conclusions The new DCLP is more appropriate than the overall detection coefficient (DC), which does not take into account the particularities of the interaction between a disease and a specific physiological state.

Natural transovarial transmission of dengue virus 4 in Aedes aegypti from Cuiabá, State of Mato Grosso, Brazil

INTRODUCTION: Dengue is the most prevalent arboviral disease in tropical areas. In Mato Grosso, outbreaks are reported every year, but studies on dengue in this state are scarce. METHODS: Natural transovarial infection of Aedes aegypti by a flavivirus was investigated in the Jardim Industriário neighborhood of Cuiabá, Mato Grosso. Eggs were collected with ovitraps during the dry, intermediate, and rainy seasons of 2012. After the eggs hatched and the larvae developed to adulthood, mosquitoes (n = 758) were identified and allocated to pools of 1-10 specimens according to the collection location, sex, and climatic period. After RNA extraction, multiplex semi-nested RT-PCR was performed to detect the four dengue virus (DENV) serotypes, yellow fever virus, West Nile virus and Saint Louis encephalitis virus. RESULTS: DENV-4 was the only flavivirus detected, and it was found in 8/50 pools (16.0%). Three of the positive pools contained females, and five contained males. Their nucleotide sequences presented 96-100% similarity with DENV-4 genotype II strains from Manaus, Amazonas. The minimum infection rate was 10.5 per 1000 specimens, and the maximum likelihood estimator of the infection rate was 11.6 (95% confidence interval: 4.8; 23.3). CONCLUSIONS: This study provides the first evidence of natural transovarial infection by DENV-4 in Ae. Aegypti in Mato Grosso, suggesting that this type of infection might serve as a mechanism of virus maintenance during interepidemic periods in Cuiabá, a city where dengue epidemics are reported every year. These results emphasize the need for efficient vector population control measures to prevent arbovirus outbreaks in the state.

Efeito de um resultado falso positivo da leitura da mamografia na não participação no rastreio do cancro da mama : estudo de coorte histórico de um rastreio de base populacional da região de saúde do centro em Portugal

RESUMO - Introdução: O cancro da mama é uma das principais causas de mortalidade por doença oncológica. O rastreio contribui para o aumento da sobrevivência, mas apresenta riscos como a obtenção de um resultado falso positivo com efeitos controversos sobre a participação subsequente. Métodos: Realizou-se um estudo de coorte histórico (2006-2012) de 170.835 mulheres com 45-67 anos, elegíveis para o programa de rastreio do cancro da mama da ARSC,IP. Calcularam-se as medidas de efeito de um falso positivo da leitura na não participação na volta consecutiva de rastreio do cancro da mama, e a associação entre o evento em estudo e factores sociodemográficos, relacionados com o rastreio e com a anamnese, através de análise de regressão de Poisson. Resultados: A incidência de não participação foi 12,13%. A exposição a falso positivo da leitura aumentou 8,01% o risco absoluto de não participação. O falso positivo da leitura da mamografia revelou-se um factor de risco para a não participação (RRa=1,17; IC 1,10-1,25). O efeito protector da existência de participações anteriores foi superior ao efeito dos factores de risco identificados. Identificaram-se outros factores de risco e de protecção. Discussão: De acordo com os factores de risco e de protecção identificados recomendaram-se alterações à operacionalização do programa de rastreio, a manutenção das estatégias adequadas e a realização de estudos futuros para avaliar o efeito de outros factores não incluídos neste estudo. A comunicação do risco associado a um resultado anormal da mamografia é importante para diminuir a ansiedade consequente ao rastreio, devendo ser oferecidas intervenções que promovam a participação no rastreio.

Introducing mapping standards in the quality assessment of buildings extracted from very high resolution satellite imagery

Many municipal activities require updated large-scale maps that include both topographic and thematic information. For this purpose, the efficient use of very high spatial resolution (VHR) satellite imagery suggests the development of approaches that enable a timely discrimination, counting and delineation of urban elements according to legal technical specifications and quality standards. Therefore, the nature of this data source and expanding range of applications calls for objective methods and quantitative metrics to assess the quality of the extracted information which go beyond traditional thematic accuracy alone. The present work concerns the development and testing of a new approach for using technical mapping standards in the quality assessment of buildings automatically extracted from VHR satellite imagery. Feature extraction software was employed to map buildings present in a pansharpened QuickBird image of Lisbon. Quality assessment was exhaustive and involved comparisons of extracted features against a reference data set, introducing cartographic constraints from scales 1:1000, 1:5000, and 1:10,000. The spatial data quality elements subject to evaluation were: thematic (attribute) accuracy, completeness, and geometric quality assessed based on planimetric deviation from the reference map. Tests were developed and metrics analyzed considering thresholds and standards for the large mapping scales most frequently used by municipalities. Results show that values for completeness varied with mapping scales and were only slightly superior for scale 1:10,000. Concerning the geometric quality, a large percentage of extracted features met the strict topographic standards of planimetric deviation for scale 1:10,000, while no buildings were compliant with the specification for scale 1:1000.

Prognostic factors influencing morbidity and mortality in esophageal carcinoma

PURPOSE: In 1980, operative mortality for esophageal resection was 29%. Over the last 15 years, technical and critical care improvements contributed to the reduction of postoperative mortality rate to 8%. The aim of this study is to analyze retrospectively the role of different factors (surgical procedure, stage of the disease, and anesthetic risk) on the postoperative mortality of 63 patients that underwent esophagectomy with gastric interposition for cancer. METHODS: Seventy-two patients underwent esophagectomy. The stomach was the esophageal substitute in 63 cases. Surgical procedures included transthoracic esophagectomy in 49 patients and transhiatal esophagectomy in 14 cases. Among the 49 transthoracic esophagectomy patients, there were 18 patients with a high anesthetic risk (ASA III). Among the patients that underwent transhiatal esophagectomy, there were 10 patients with a high anesthetic risk (ASA III). RESULTS: The operative mortality rate was 14% (2/14) in transhiatal esophagectomy group and 22% (11/49) in transthoracic esophagectomy group (P = ns). The postoperative mortality of patients with a high anesthetic risk (ASA III) was 47% (8/17) after transthoracic esophagectomy and 10% (1/10) after transhiatal esophagectomy (P <0.05). DISCUSSION: In our experience, the operative mortality was nearly 18% (16.6% after transhiatal esophagectomy and 20.8% after transthoracic esophagectomy). Among the patients with a high anesthetic risk (ASA III) that underwent surgery, the postoperative mortality was significantly lower after transhiatal esophagectomy (10%) compared to transthoracic esophagectomy (47%) (P <0.05).

Socio-demographic correlates of physical activity of European adults: A cross-sectional study from the European Social Survey

ABSTRACT - Background: From a public health perspective, the study of socio-demographic factors related to physical activity is important in order to identify subgroups for intervention programs. Purpose: This study also aimed to identify the prevalence and the socio-demographic correlates related with the achievement of recommended physical activity levels. Methods: Using data from the European Social Survey round 6, physical activity and socio-demographic characteristics were collected from 39278 European adults (18271 men, 21006 women), aged 18-64 years, from 28 countries in 2012. Meeting physical activity guidelines was assessed using World Health Organization criteria. Results: 64.50% (63.36% men, 66.49% women) attained physical activity recommended levels. The likelihood of attaining physical activity recommendations was higher in age group of 55-64 years (men: OR=1.22, p<0.05; women: OR=1.66, p<0.001), among those who had completed high school (men: OR=1.28, p<0.01; women: OR=1.26, p<0.05), among those who lived in rural areas (men: OR=1.20, p<0.001; women: OR=1.10, p<0.05), and among those who had 3 or more people living at home (men: OR=1.40, p<0.001; women: OR=1.43, p<0.001). On the other hand, attaining physical activity recommendations was negatively associated with being unemployed (men: OR=0.70, p<0.001; women: OR=0.87, p<0.05), being a student (men: OR=0.56, p<0.001; women: OR=0.64, p<0.01), being a retired person (men: OR=0.86, p<0.05) and with having a higher household income (OR=0.80, p<0.001; women: OR=0.81, p<0.01). Conclusion: This research helped clarify that, as the promotion of physical activity is critical to sustain health and prevent disease, socio-demographic factors are important to consider when planning the increase of physical activity.

ESTIMACION DE EDAD Y CRECIMIENTO EN LA "PACORA" (PLAGIOSCION SURINAMENSIS BLEECKER, 1873) POR MEDIO DE LA COMPARACION DE LOS METODOS DE ANALISIS DE DISTRIBUCION DE FRECUENCIAS Y LAS MARCAS EN ESCAMAS Y OTOLITOS

En la presente investigación se estima la edad y creecimiento de la pacora (Plagiosclon surinamensis), por medio de la comparación de los métodoe de distribución de frecuencias, marcas en las escamas y marcae en los otolitos; de esta comparación se concluye que la pacora forma tres anillos en las escamas por año y con base en este método, estableciendo los grupos de edad anuales, se calcula la ecuación de crecimiento de Von Bertalanffy, la cual se expressa de la siguiente manera:Lt (ram) = 775.1 * {1 - e -0.362 * (t - 0.0978)}. La relación talla-peso se calculó ordenando las tallas en intervalos de 10 ram y corresponde a la ecuación:Peso (gr) = 1.1 * 10-5 * L. E.(3.08), no encontrándose diferencias significativas entre el crecimiento de hembras y el de machos. Se complementa la investigación con información sobre tallas mínimas y medias de madurez sexual y espectro trófico de la especie en la parte baja de la cuenca del Río Magdalena y su plano inundable.

ESTRATIFICAÇÃO E DENSIDADE DE INVERTEBRADOS EM SOLO ARENOSO SOB FLORESTA PRIMÁRIA E PLANTIOS ARBÓREOS NA AMAZÔNIA CENTRAL DURANTE A ESTAÇÃO SECA

Densidade e distribuição vertical de invertebrados foram estudados durante o mês de setembro de 1990 e 1991, em solo de três tipos de cobertura vegetal: floresta primária, plantios de Dipteryx odorata(Leguminosae = cumaru) e Simaruba amara(Simarubaceae = marupá), nos arredores de Manaus, Brasil. Foram encontrados 19 grupos principais da fauna. A maioria desses grupos foram similares para os três tipos de cobertura, sendo Isoptera (40,1%), Formicidae (25,2%), Araneae (6,7%) os grupos mais abundantes que, juntos, representaram 62,4% da fauna de cumaru, 57,0% da fauna de marupá e 84,1% da fauna de floresta. Houve uma diminuição da densidade para todos os grupos (excluídos os cupins) até a profundidade de 20 cm, com subseqüente aumento até 30 cm de profundidade, principalmente pela presença de Isoptera. Cerca de 45% de toda a fauna ocorreu no estrato de 0-5 cm de profundidade, seguido de 9,5% (5-10 cm), 9,1% (10-15 cm), 2,7% (15-20 cm), 20,7% (20-25 cm) e 12,3% (25-30 cm) nos estratos subseqüentes. Isoptera, Diptera e outros invertebrados não apresentaram correlação com a umidade e o pH do solo.

Uma ferramenta para cálculo da máxima intensidade da ilha de calor noturna

O objetivo deste artigo é verificar a influência da geometria urbana na intensidade de ilhas de calor noturnas com uso de uma ferramenta computacional desenvolvida como extensão de um SIG. O método deste trabalho está dividido em três principais etapas: desenvolvimento da ferramenta, calibração do modelo e simulação de cenários hipotéticos com diferentes geometrias urbanas. Um modelo simplificado que relaciona as intensidades máximas de ilha de calor urbana (ICUmáx) com a geometria urbana foi incorporado à subrotina de cálculo e, posteriormente, adaptado para fornecer resultados mais aproximados à realidade de duas cidades brasileiras, as quais serviram de base para a calibração do modelo. A comparação entre dados reais e simulados mostraram uma diferença no aumento da ICUmáx em função da relação H/W e da faixa de comprimento de rugosidade (Z0). Com a ferramenta já calibrada, foi realizada uma simulação de diferentes cenários urbanos, demonstrando que o modelo simplificado original subestima valores de ICUmáx para as configurações de cânions urbanos de Z0 < 2,0 e superestima valores de ICUmáx para as configurações de cânions urbanos de Z0 ≥ 2,0. Além disso, este estudo traz como contribuição à verificação de que cânions urbanos com maiores áreas de fachadas e com alturas de edificações mais heterogêneas resultam em ICUmáx menores em relação aos cânions mais homogêneos e com maiores áreas médias ocupadas pelas edificações, para um mesmo valor de relação H/W. Essa diferença pode ser explicada pelos diferentes efeitos na turbulência dos ventos e nas áreas sombreadas provocados pela geometria urbana.

Masonry macro-block analysis

The structural analysis involves the definition of the model and selection of the analysis type. The model should represent the stiffness, the mass and the loads of the structure. The structures can be represented using simplified models, such as the lumped mass models, and advanced models resorting the Finite Element Method (FEM) and Discrete Element Method (DEM). Depending on the characteristics of the structure, different types of analysis can be used such as limit analysis, linear and non-linear static analysis and linear and non-linear dynamic analysis. Unreinforced masonry structures present low tensile strength and the linear analyses seem to not be adequate for assessing their structural behaviour. On the other hand, the static and dynamic non-linear analyses are complex, since they involve large time computational requirements and advanced knowledge of the practitioner. The non-linear analysis requires advanced knowledge on the material properties, analysis tools and interpretation of results. The limit analysis with macro-blocks can be assumed as a more practical method in the estimation of maximum load capacity of structure. Furthermore, the limit analysis require a reduced number of parameters, which is an advantage for the assessment of ancient and historical masonry structures, due to the difficult in obtaining reliable data.

Comparative environmental life-cycle analysis of concretes using biomass and coal fly ashes as partial cement replacement material

Nowadays, the concrete production sector is challenged by attempts to minimize the usage of raw materials and energy consumption, as well as by environmental concerns. Therefore, it is necessary to choose better options, e.g. new technologies or materials with improved life-cycle performance. One solution for using resources in an efficient manner is to close the materials' loop through the recycling of materials that result either from the end-of-life of products or from being the by-product of an industrial process. It is well known that the production of Portland cement, one of the materials most used in the construction sector, has a significant contribution to the environmental impacts, mainly related with carbon dioxide emission. Therefore, the study and utilization of by-products or wastes usable as cement replacement in concrete can supply more sustainable options, provided that these type of concrete produced has same durability and equivalent quality properties as standard concrete. This work studied the environmental benefits of incorporating different percentages of two types of fly ashes that can be used in concrete as cement replacement. These ashes are waste products of power and heat production sectors using coal or biomass as fuels. The results showed that both ashes provide a benefit for the concrete production both in terms of environmental impact minimization and a better environmental performance through an increase in cement replacement. It is possible to verify that the incorporation of fly ashes is a sustainable option for cement substitution and a possible path to improve the environmental performance of the concrete industry.

Avaliação do processo de implementação de PBL num curso de engenharia informática em Moçambique: as percepções dos estudantes

O presente artigo traz uma avaliação sobre um processo de implementação do PBL que ocorreu no curso de Engenharia Informática na Faculdade de Engenharia da Universidade Eduardo Mondlane em Moçambique. Por este processo ser novo no contexto de ensino de Engenharia em Moçambique foram os desafios encontrados por parte dos docentes e estudantes relativos a implementação, coordenação e adequação do currículo a metodologia do PBL, fazendo com que o processo de implementação fosse gradual. Assim no primeiro semestre de 2014 foi implementado um processo PBL piloto envolvendo as disciplinas de Programação Orientada à Objetos 1 e Base de Dados 1, que foram disciplinas escolhidas pelo facto de seus currículos terem matérias comuns, todos desafios e comentários dados pelos estudantes foram levados em conta no desenho do segundo processo PBL para o segundo semestre de 2014 que envolveu as disciplinas de Programação Orientada à Objetos 2, Base de Dados 2 e Sistemas de Multimídia fazendo com que houvesse mais informação para o terceiro processo envolvendo as disciplinas de Engenharia de Software 1 e Programação em Web. A avaliação do processo por parte dos estudantes, veio através de inquiridos onde os estudantes fizeram chegar as suas preocupações e ideias a respeito do PBL e dos moldes em que este estava a ser implementado no currículo. O processo de implementação do PBL pode ser considerado uma experiência bem sucedida e com futuro promissor e que de certeza vai ajudar a inovar os processos de ensino de engenharia em Moçambique.

Determinação espectrofotométrica do arsênio em solo da cidade de Santana-AP usando o método do dietilditiocarbamato de prata (SDDC) modificado

Várias toneladas de rejeito de manganês contendo arsênio, gerado por uma empresa de mineração, foram utilizadas como aterro de ruas da cidade de Santana-AP. A possibilidade de exposição das pessoas residentes nessas localidades levou ao estudo de quantificação de arsênio total nos solos. Após a digestão, os teores de arsênio foram quantificados por espectrofotometria de absorção molecular usando um sistema automático de geração de hidretos (HG-MAS), diciclohexilamina/CHCl3 como solvente do dietilditiocarbamato de prata (SDDC) e KBH4 como redutor. O método apresentou bons resultados com sensibilidade (ε) de 1,10 10(4) L.mol-1.cm-1, estabilidade de 2,96% e outras vantagens em relação ao método oficial. O método foi aplicado em amostras de referência de solo com recuperação de 98,82 % (N=10). As análises de solos mostraram que do total de amostras analisadas 94,74 % apresentaram concentração de arsênio acima do valor editado pela CETESB para solo residencial (50 mg.kg-1) com valor médio de 682,96 mg.kg-1, variando de 48,08 mg.kg-1 a 1.713,00 mg.kg-1 que comprova a contaminação do solo pelo arsênio.

Myopia control with a novel peripheral gradient soft lens and orthokeratology: a 2-year clinical trial

Objective. To evaluate the degree of axial elongation with soft radial refractive gradient (SRRG) contact lenses, orthokeratology (OK), and single vision (SV) spectacle lenses (control) during a period of 1 year before treatment and 2 years after treatment. Methods. This was a prospective, longitudinal, nonrandomized study. The study groups consisted of 30, 29, and 41 children, respectively. The axial length (AL) was measured during 2 years after recruitment and lens fitting. Results. The baseline refractive sphere was correlated significantly (r 2 = 0.542; P < 0.0001) with the amount of myopia progression before baseline. After 2 years, the mean myopia progression values for the SRRG, OK, and SV groups were −0.56 ± 0.51, −0.32 ± 0.53, and −0.98 ± 0.58 diopter, respectively. The results represent reductions in myopic progression of 43% and 67% for the SRRG and OK groups, respectively, compared to the SV group. The AL increased more in the SV group compared to the SRRG and OK groups, with 27% and 38% lower axial elongation, respectively, compared to the SV group at the 2-year visit (P < 0.05). SRRG and OK showed no differences (P = 0.430). Conclusion. The SRRG lens significantly decreased AL elongation compared to the SV control group. The SRRG lens was similarly effective to OK in preventing myopia progression in myopic children and adolescent.

Gellan gum-Ionic liquid membranes for electrochromic device application

Biopolymer-based materials have been of particular interest and they are alternatives to synthetic polymers based on the decreasing oil resources. The polymer electrolytes were doped with choline-based IL N,N,Ntrimethyl- N-(2-hydroxyethyl)ammonium bis(trifluoromethylsulfonyl)imide ([N1 1 1 2(OH)][NTf2]), or Er (CF3SO3)3 or both. The polymer electrolytes were employed in the production of glass/ITO/WO3/electrolyte/ CeO2–TiO2/ITO/glass electrochromic devices (ECDs). The lowest onset temperature for the degradation of all the SPEs is at ~130 °C for the Gellan Er (CF3SO3)3 (10:1) this temperature range of stability is wide enough for a material to be applied as an electrolyte/separator component in electrochemical devices. The three ECDs displayed fast switching speed (ca. 15 s). Gellan [N1 1 1 2(OH)][NTf2] Er (CF3SO3)3 (5:1:10) exhibited an electrochromic contrast of 4.2% in the visible region, the coloration efficiency attained at 555 nm was 3.5 and 0.90 cm-2 C-1 in the “colored” and “bleached” states, respectively, and the open circuit memorywas 48 h. Preliminary tests performed with a prototype electrochromic device (ECD) incorporating WO3 as cathodic electrochromic layer, are extremely encouraging.