Trypanosoma cruzi: amastigote polymorphism defined by monoclonal antibodies

We have raised monoclonal antibodies (mAbs) directed towards amastigote forms of Trypanosoma cruzi, and shown that mAbs 1D9 and 4B9 are carbohydrate while mAb 4B5 activity is resistant to periodate oxidation of the antigen. Here we used an ELISA to quantitate and compare the expression of surface epitopes on fixed parasites among different parasite isolates. The expression of markers varied among T. cruzi amastigotes isolated from infected cells or after extracellular differentiation of trypomastigotes. Moreover, we also observed an extensive polymorphic expression of these epitopes among amastigotes derived from different strains and clones. For instance, mAb 2C2 strongly and evenly reacted with 9 strains and clones (G, Y, CL, Tulahuen, MD, and F, and clones Sylvio X-10/4, D11, and CL.B), with absorbance at 492 nm (A492 nm) from 0.6 to 0.8. By contrast, mAb 4B5 had a higher expression in Tulahuen amastigotes (around 0.9 at 492 nm) whereas its reactivity with amastigotes from clones CL.B, Sylvio X-10/4 and D11 was much lower (around 0.4). mAb 1D9 displayed an interesting pattern of reactivity with amastigotes of the different strains and clones (A492 nm of G>D11³Sylvio X-10/4 = MD>Tulahuen = F = Y>CL>CL.B). Finally, we observed that mAb 4B9 had the lowest reaction with the parasites studied, with higher values of A492 nm with Y strain (around 0.6) and lower values with Tulahuen, F and CL.B strains (around 0.2). Immunoblotting analysis also showed extensive variations among amastigotes of the various parasite isolates and mAbs 4B9, 1D9 and 4B5 revealed significant differences in expression between clones and parental strains. These data describe a previously uncharacterized polymorphism of T. cruzi amastigote surface components.

Detection of point mutations by non-isotopic single strand conformation polymorphism

We have developed a procedure for nonradioactive single strand conformation polymorphism analysis and applied it to the detection of point mutations in the human tumor suppressor gene p53. The protocol does not require any particular facilities or equipment, such as radioactive handling, large gel units for sequencing, or a semiautomated electrophoresis system. This technique consists of amplification of DNA fragments by PCR with specific oligonucleotide primers, denaturation, and electrophoresis on small neutral polyacrylamide gels, followed by silver staining. The sensitivity of this procedure is comparable to other described techniques and the method is easy to perform and applicable to a variety of tissue specimens.

Characterization of six rat strains (Rattus norvegicus) by mitochondrial DNA restriction fragment length polymorphism

Restriction fragment length polymorphism (RFLP) was used to examine the extent of mtDNA polymorphism among six strains of rats (Rattus norvegicus) - Wistar, Wistar Munich, Brown Norway, Wistar Kyoto, SHR and SHR-SP. A survey of 26 restriction enzymes has revealed a low level of genetic divergence among strains. The sites of cleavage by EcoRI, NcoI and XmnI were shown to be polymorphic. The use of these three enzymes allows the 6 strains to be classified into 4 haplotypes and identifies specific markers for each one. The percentage of sequence divergence among all pairs of haplotypes ranged from 0.035 to 0.33%, which is the result of a severe population constriction undergone by the strains. These haplotypes are easily demonstrable and therefore RFLP analysis can be employed for genetic monitoring of rats within animal facilities or among different laboratories.

Effects of the partial removal of wood hemicelluloses on the properties of kraft pulp

The objective of this work was to study the effects of partial removal of wood hemicelluloses on the properties of kraft pulp.The work was conducted by extracting hemicelluloses (1) by a softwood chip pretreatment process prior to kraft pulping, (2) by alkaline extraction from bleached birch kraft pulp, and (3) by enzymatic treatment, xylanase treatment in particular, of bleached birch kraft pulp. The qualitative and quantitative changes in fibers and paper properties were evaluated. In addition, the applicability of the extraction concepts and hemicellulose-extracted birch kraft pulp as a raw material in papermaking was evaluated in a pilot-scale papermaking environment. The results showed that each examined hemicellulose extraction method has its characteristic effects on fiber properties, seen as differences in both the physical and chemical nature of the fibers. A prehydrolysis process prior to the kraft pulping process offered reductions in cooking time, bleaching chemical consumption and produced fibers with low hemicellulose content that are more susceptible to mechanically induced damages and dislocations. Softwood chip pretreatment for hemicellulose recovery prior to cooking, whether acidic or alkaline, had an impact on the physical properties of the non-refined and refined pulp. In addition, all the pretreated pulps exhibited slower beating response than the unhydrolyzed reference pulp. Both alkaline extraction and enzymatic (xylanase) treatment of bleached birch kraft pulp fibers indicated very selective hemicellulose removal, particularly xylan removal. Furthermore, these two hemicellulose-extracted birch kraft pulps were utilized in a pilot-scale papermaking environment in order to evaluate the upscalability of the extraction concepts. Investigations made using pilot paper machine trials revealed that some amount of alkalineextracted birch kraft pulp, with a 24.9% reduction in the total amount of xylan, could be used in the papermaking stock as a mixture with non-extracted pulp when producing 75 g/m2 paper. For xylanase-treated fibers there were no reductions in the mechanical properties of the 180 g/m2 paper produced compared to paper made from the control pulp, although there was a 14.2% reduction in the total amount of xylan in the xylanase-treated pulp compared to the control birch kraft pulp. This work emphasized the importance of the hemicellulose extraction method in providing new solutions to create functional fibers and in providing a valuable hemicellulose co-product stream. The hemicellulose removal concept therefore plays an important role in the integrated forest biorefinery scenario, where the target is to the co-production of hemicellulose-extracted pulp and hemicellulose-based chemicals or fuels.

Association of apolipoprotein E polymorphism with plasma lipids and Alzheimer's disease in a Southern Brazilian population

Apolipoprotein E (protein: apo E; gene: APOE) plays an important role in the multifactorial etiology of both Alzheimer's disease (AD) and lipid level concentrations. The polymerase chain reaction (PCR) was used to investigate the APOE gene polymorphism in 446 unrelated Caucasians, among them 23 AD patients, and 100 Afro-Brazilians living in Porto Alegre, Brazil. The frequencies of the APOE*2, APOE*3 and APOE*4 alleles were 0.075, 0.810 and 0.115 in Caucasians and 0.075, 0.700 and 0.225 in Afro-Brazilians, respectively (c2 = 8.72, P = 0.013). A highly significant association was observed between the APOE*4 allele and AD in this population-based sample. The APOE*4 frequency in AD patients (39%) was about four times higher than in the general Caucasian population (11.5%). The influence of each of the three common APOE alleles on lipid traits was evaluated by the use of the average excess statistic. The E*2 allele is associated with lower levels of triglycerides and of total and non-HDL cholesterol in both men and women. Conversely, the E*4 allele is associated with higher levels of these traits in women only. The effect of APOE alleles was of greater magnitude in women.

Improving the usability of extruded wood-plastic composites by using modification technology

Using cellulosic reinforcement to produce plastic composites is a globally growing trend. One of such materials are wood-plastic composites, which are an extensively studied group of materials for which the global industry is looking for new applications. Issues such as bondability, durability and fire resistance still require development to improve the usability of the wood-plastic composite material. Improvement of the usability of wood-plastic composites is studied in this thesis through the effects of using selected modification technology in wood and plastic industry. The applied modification methods are surface by mechanical abrasion and plasma, chemical impregnation of wood flour, and structural modification by the co-extrusion process. The study shows that the properties of WPC can be influenced by the selected modification methods. The selected methods are also found to be able to result as improvement in the properties of the material. The may also affect other than just the targeted properties of the end-product, either in a positive or a negative manner. Therefore modification as performance improvement should be considered as a caseby- case study. Introducing WPC materials for new applications can be done by using modification technology. Structuralmodification can possibly be used to reduce material costs of the modified WPC material.

Investigation of single-strand conformational polymorphism of the TP53 gene in women with a family history of breast cancer

Breast cancer in families with germ line mutations in the TP53 gene has been described in the medical literature. Mutation screening for susceptibility genes should allow effective prophylactic and preventive measures. Using single-strand conformational polymorphism, we screened for mutations in exons 5, 6, 7 and 8 of gene TP53 in the peripheral blood of 8 young non-affected members (17 to 36 years old) of families with a history of breast cancer. Studies of this type on young patients (mean age, 25 years) are very rare in the literature. The identification of these mutations would contribute to genetic counseling of members of families with predisposition to breast cancer. The results obtained did not show any polymorphism indicating mutation. In our sample, the familial tumorigenesis is probably related to other gene etiologies.

Ultraviolet light protection and weathering properties of wood-polypropylene composites

The main aim of this thesis is to study the effect of pigments on the weathering properties of wood-polypropylene composites (WPC). The studied properties are color change, water absorption, thickness swelling and Charpy impact strength. The impact of weathering and UV exposure on WPCs was studied by using pigments and minerals as protective agents. The study shows that the pigments and/or mineral fillers can be used to improve the weathering properties of WPCs. The effect of pigments was found to vary with the type of pigment and the method of weathering. The black pigment, an inorganic carbon black master-batch, was found to be the most effective one in reduction of the discoloration of WPCs. By preventing discoloration, and further reducing the degradation of the surface of the WPC, the pigments were found to reduce the decrease in the impact strength after weathering. As well as UV protection, the moisture resistance is a significant factor affecting the durability of WPCs. The addition of mineral fillers was found to improve the moisture-related properties, such as water absorption and thickness swelling, of WPC significantly. According to the findings, addition of pigments and mineral fillers to wood-polypropylene composites appears to be beneficial: color stability and moisture resistance can be enhanced especially in outdoor weathering. The combined effect of black pigment (carbon black master-batch) and wollastonite as a mineral filler was found to bring about the most effective properties against weathering.

Association between EcoRI fragment-length polymorphism of the immunoglobulin lambda variable 8 (IGLV8) gene family with rheumatoid arthritis and systemic lupus erythematosus

The human immunoglobulin lambda variable 8 (IGLV8) subgroup is a gene family containing three members, one of them included in a monomorphic 3.7-kb EcoRI genomic fragment located at the major lambda variable locus on chromosome 22q11.1 (gene IGLV8a, EMBL accession No. Z73650) at 100% frequency in the normal urban population. The second is a polymorphic RFLP allele included in a 6.0-kb EcoRI fragment at 10% frequency, and the third is located in a monomorphic 8.0-kb EcoRI fragment at 100% frequency, the last being translocated to chromosome 8q11.2 and considered to be an orphan gene. Our Southern blot-EcoRI-RFLP studies in normal individuals and in patients with rheumatoid arthritis (RA) or with systemic lupus erythematosus (SLE), using a specific probe for the IGLV8 gene family (probe pVL8, EMBL accession No. X75424), have revealed the two monomorphic genomic fragments containing the IGLV8 genes, i.e., the 3.7-kb fragment from chromosome 22q11.1 and the 8.0-kb fragment from 8q11.2, both occurring at 100% frequency (103 normal individuals, 48 RA and 28 SLE patients analyzed), but absence of the 6.0-kb IGLV8 polymorphic RFLP allele in all RA or SLE patients. As expected, the frequency of the 6.0-kb allele among the normal individuals was 10%. These findings suggest an association between the absence of the 6.0-kb EcoRI fragment and rheumatoid arthritis and systemic lupus erythematosus.

Bone mineral density in young women of the city of São Paulo, Brazil: correlation with both collagen type I alpha 1 gene polymorphism and clinical aspects

Osteoporosis is a multifactorial disease with great impact on morbidity and mortality mainly in postmenopausal women. Although it is recognized that factors related to life-style and habits may influence bone mass formation leading to greater or lower bone mass, more than 85% of the variation in bone mineral density (BMD) is genetically determined. The collagen type I alpha 1 (COLIA1) gene is a possible risk factor for osteoporosis. We studied a population of 220 young women from the city of São Paulo, Brazil, with respect to BMD and its correlation with both COLIA1 genotype and clinical aspects. The distribution of COLIA1 genotype SS, Ss and ss in the population studied was 73.6, 24.1 and 2.3%, respectively. No association between these genotypes and femoral or lumbar spine BMD was detected. There was a positive association between lumbar spine BMD and weight (P<0.0001), height (P<0.0156), and body mass index (BMI) (P<0.0156), and a negative association with age at menarche (P<0.0026). There was also a positive association between femoral BMD and weight (P<0.0001), height (P<0.0001), and BMI (P<0.0001), and a negative correlation with family history for osteoporosis (P<0.041). There was no association between the presence of allele s and reduced BMD. We conclude that a family history of osteoporosis and age at menarche are factors that may influence bone mass in our population.

Conditions and practices in the commercialisation of innovations in wood industry

The report 'Conditions and practices in the commercialisation of innovation in wood industry' has been written as a part of the Wood Academy project. The report analyses the commercialisation conditions and practices of wood industry by utilising product categorisation based on a conceptual schema which combines the aspects of the transfer of the procession of utility and the degree of form/service utility (or value-added) created or provided by the company. Open innovation approaches help to perceive the possible new product and service innovations as well as the new business models and earning logics in the industry. The report also contains brief company cases to demonstrate theory-to-practice and showcase company examples from successful Finnish companies.

Association studies between -1185A/G von Willebrand factor gene polymorphism and coronary artery disease

High levels of von Willebrand factor (vWF) have been associated with cardiovascular disease. The A allele of the -1185A/G polymorphism in the 5'-regulatory region of the vWF gene was associated with the highest plasma vWF levels in a normal population. To examine the association between -1185A/G polymorphism and coronary artery disease (CAD), 173 Brazilian Caucasian subjects submitted to coronary angiography were studied. Of these, 57 (33%) had normal coronary arteries (control group) and 116 (67%) had CAD (patient group). Plasma vWF levels were higher in patients (145 U/dl) than in controls (130 U/dl), but the differences were significant only for O blood group subjects. Polymerase chain reaction amplification of the 864-bp vWF promoter region followed by AccII restriction digestion was used to identify the -1185A/G genotypes. The -1185A allele frequency was 43.1% in patients and 44.7% in controls. Allele and genotype frequencies were not significantly different between patients and controls. No association was observed between the -1185A/G genotypes and plasma vWF levels in patients or controls. These results suggest that -1185A/G polymorphism is not an independent risk factor for CAD.

Association of apolipoprotein E polymorphism in late-onset Alzheimer's disease and vascular dementia in Brazilians

The genetic basis for dementias is complex. A common polymorphism in the apolipoprotein E (APOE) gene is considered to be the major risk factor in families with sporadic and late-onset Alzheimer's disease as well as in the general population. The distribution of alleles and genotypes of the APOE gene in late-onset Alzheimer's disease (N = 68), other late-life dementias (N = 39), and in cognitively normal controls (N = 58) was determined, as also was the risk for Alzheimer's disease associated with the epsilon4 allele. Peripheral blood samples were obtained from a total of 165 individuals living in Brazil aged 65-82 years. Genomic DNA was amplified by the polymerase chain reaction and the products were digested with HhaI restriction enzyme. APOE epsilon2 frequency was considerably lower in the Alzheimer's disease group (1%), and the epsilon3 allele and epsilon3/epsilon3 genotype frequencies were higher in the controls (84 and 72%, respectively) as were the epsilon4 allele and epsilon3/epsilon4 genotype frequencies in Alzheimer's disease (25 and 41%, respectively). The higher frequency of the epsilon4 allele in Alzheimer's disease confirmed its role as a risk factor, while epsilon2 provided a weak protection against development of the disease. However, in view of the unexpectedly low frequency of the epsilon4 allele, additional analyses in a more varied Brazilian sample are needed to clarify the real contribution of apolipoprotein E to the development of Alzheimer's disease in this population.

IS1245 restriction fragment length polymorphism typing of Mycobacterium avium from patients admitted to a reference hospital in Campinas, Brazil

Mycobacterium avium is an important pathogen among immunodeficient patients, especially patients with AIDS. The natural history of this disease is unclear. Several environmental sources have been implicated as the origin of this infection. Polyclonal infection with this species is observed, challenging the understanding of its pathogenesis and treatment. In the present study 45 M. avium strains were recovered from 39 patients admitted to a reference hospital between 1996 and 1998. Species identification was performed using a species-specific nucleic acid hybridization test (AccuProbe®) from Gen-Probe®. Strains were genotyped using IS1245 restriction fragment length polymorphism typing. Blood was the main source of the organism. In one patient with disseminated disease, M. avium could be recovered more than once from potentially sterile sites. Strains isolated from this patient had different genotypes, indicating that the infection was polyclonal. Four patient clones were characterized in this population, the largest clone being detected in eight patients. This finding points to a common-source transmission of the organism.

Thr(118)Met amino acid substitution in the peripheral myelin protein 22 does not influence the clinical phenotype of Charcot-Marie-Tooth disease type 1A due to the 17p11.2-p12 duplication

The Thr(118)Met substitution in the peripheral myelin protein 22 (PMP22) gene has been detected in a number of families with demyelinating Charcot-Marie-Tooth (CMT1) neuropathy or with the hereditary neuropathy with liability to pressure palsy, but in none of them has it consistently segregated with the peripheral neuropathy. We describe here a CMT1 family (a 63-year-old man, his brother and his niece) in which two mutations on different chromosomes were found in the PMP22 gene, the 17p duplication, detected by fluorescent semiquantitative polymerase chain reaction (PCR) of microsatellite markers localized within the duplicated region on chromosome 17p11.2-p12, and the Thr(118)Met substitution, detected by direct sequencing the four coding exons of the PMP22 gene. A genotype/phenotype correlation study showed that the neuropathy segregates with the duplication and that the amino acid substitution does not seem to modify the clinical characteristics or the severity of the peripheral neuropathy. We did not find any evidence to characterize this substitution as a polymorphism in the population studied and we propose that the high frequency reported for this point mutation in the literature suggests that the Thr(118)Met substitution may be a hotspot for mutations in the PMP22 gene.