Avaliação da camada intermetálica em placas de circuito impresso com acabamento superficial HASL com diferentes processos de soldagem

Dissertação de mestrado integrado em Engenharia de Materiais

Development of procedures for the design, optimization and manufacturing of customized orthopaedic and trauma implants: Geometrical/anatomical modelling from 3D medical imaging

Tese de Doutoramento (Programa Doutoral em Engenharia Biomédica)

Desarrollo sustentable de geoestructuras compuestas por suelo loéssico compactado mejorado con agregado de materiales estabilizantes. Sustainable development of compacted loess soil geo-structures with addition of stabilizing materials.

Los suelos estabilizados mediante compactación, permiten obtener materiales con ventajas ténicas y economicas en diferentes tipos de obras de ingeniería. Ejemplos de su uso se tiene en bases viales de autopistas, rutas o calles urbanas, pistas de aterrizaje, barreras de contención para enterramientos sanitarios o lagunas de estabilización, apoyos de plateas para fundación de edificios, losas industriales, entre otras aplicaciones. Las fallas en este tipo de construcciones pueden resultar en catástrofes ambientales, sociales y elevadas pérdidas económicas, por lo que resulta de gran importancia optimizar el diseño e incrementar la seguridad de este tipo de construcciones. Las obras con estas características involucran grandes volúmenes y/o superficies que requieren controles sistemáticos durante su desarrollo, a los fines de garantizar el cumplimiento de las propiedades de los materiales establecidos en la etapa de diseño. De esta forma, es necesario contar con ensayos de campo sencillos, confiables y eficientes que permitan identificar propiedades físicas, mecánicas e hidráulicas. Las geoestructuras generadas mediante la compactación del suelo próximo al sector de construcción pueden funcionar adecuadamente, con reducidos costos de material y transporte. Su estabilización puede ejecutarse en forma natural, o con la incorporación de agregados minerales como bentonita, cal o cemento. Estas incorporaciones mejoran las propiedades hidráulicas y mecánicas del material, optimizando el comportamiento requerido para la obra. Para establecer la forma en la que estos minerales modifican el comportamiento del suelo local compactado deben realizarse investigaciones especiales con los materiales involucrados. En el ámbito internacional existen numerosas investigaciones sobre comportamiento de suelos compactados, no obstante, si bien aportan antecedentes para la planificación de estudios locales, sus resultados no pueden trasladarse de manera directa. Las características propias del suelo local constituye la principal variable debido a la diversidad en las propiedades geotécnicas de cada Región. Esta investigación, se focaliza en el empleo de suelos limosos de la formación loéssica de la zona central de Argentina. Los suelos de la llanura cordobesa poseen comportamientos particulares, los cuales son contemplados en los diseños presentados como resutado de las investigaciones internacionales. Esta particularidad se relaciona con su inestabilidad, lo que los clasifica como suelos colapsables. Los resultados obtenidos en este trabajo podrán ser extendidos a una gran superficie de la Provincia de Córdoba y a la Región Pampeana en general, a los fines de establecer recomendaciones de diseño y construcción para la confección de Pliegos de Especificaciones Técnicas de diferentes tipos de obras públicas y privadas. El estudio contempla la ejecución de un plan experimental a escala de laboratorio y campo. Los materiales corresponden a suelo limosos puros, y diferentes agregados tales como bentonita, cal y cemento. Se planifican ensayos para evaluar el desempeño del material, a partir de la confección de muestras preparadas con diferentes condiciones de compactación (energía, humedad y método), y en forma de mezcla con los distintos tipos de agregados. Se realizarán ensayos de permeabilidad en celdas de pared rígida y flexible, junto a ensayos mecánicos de compresión confinada, simple y triaxial. Para el trabajo experimental de campo se prevé la ejecución de terraplenes de prueba instrumentados con tensiómetros e infiltrómetros para evaluar el comportamiento hidraúlico en el tiempo, junto con ensayos de penetración y plato de carga para la caracterización mecánica. En forma conjunta se propone el desarrollo de modelos numéricos de caracterización hidromecánica. Stabilized soils by compaction, produce materials technical and economic advantages in different types of engineering works. For example, road bases in highways, roads or city streets, containment barriers for sanitary landfill or stabilization ponds, foundation support of building, industrial flat, and other applications. Failures can result in environmental catastrophes, social, and economic loss, so it is important to optimize the design and increase the safety of such buildings. These works involve large surfaces that require systematic tests during construction, so it is necessary to have simple field tests, reliable and efficient to identify physical, mechanical and hydraulic properties. The geo-structures generated by local soil compaction have reduced material and transportation costs. Stabilization can be naturally, or with the addition of mineral aggregates as bentonite, lime and cement. These additions improve the hydraulic and mechanical properties of the material. So, special investigations should be conducted with the materials involved. There are many international studies on compacted soils behavior but their results can not be transferred directly due to the particularities of regional soils. For this research silty soils of central Argentina are the main focus. The soils of Córdoba plains are instability, so are classified as collapsible soils. The results obtained in this work may be extended to a large area of the Province of Cordoba and the Pampas region in general, in order to establish design and construction recommendations. The study includes laboratory and field tests. The materials are pure silty soil, and different aggregates such as bentonite, lime and cement. Tests are planned to evaluate the performance. Laboratory includes rigid and flexible wall cells, confined, triaxial and simple compression tests. For field experimental instrumented embankments will be constructed. A numerical hydromechanical model will be developed.

An investigation into the temperature distribution resulting from cutting of compact bone using a reciprocating bone saw

Surgical procedures such as osteotomy and hip replacement involve the cutting of bone with the aid of various manual and powered cutting instruments including manual and powered bone saws. The basic mechanics of bone sawing processes are consistent with most other material sawing processes such as for wood or metal. Frictional rubbing between the blade of the saw and the bone results in the generation of localised heating of the cut bone. Research studies have been carried out which consider the design of the bone saw which deals with specifics of the saw teeth geometry and research which examines the effect of drilling operations on heating of the bone has shown that elevated temperatures will occur from frictional overheating. This overheating in localised areas is known to have an impact on the rate of healing of the bone post operation and the sharpness life of the blade. The purpose of this study was to measure the temperature at three zones at fixed intervals of 3mm, 6mm, and 9mm away from the cutting zone. It should be noted that it was the first time that this measurement technique was used to measure the temperature gradient through the bone specimen thereby establishing the extent to which clinicians are experiencing thermal injury during sawing of bone while using a reciprocating saw. The effect of various cutting feed rate on temperature elevation was also investigated in this research. The results showed that there will be a region of bone at least 9mm either side of the cutting blade experiencing thermal injury as temperatures in this region exceeded the threshold temperature of 44°C for necrosis (cell death).

Relação entre o Paratormônio e Depressão na insuficiência cardíaca

FUNDAMENTO: Tem-se observado que a depressão é preditora de reinternação e mortalidade na insuficiência cardíaca. O hormônio da paratireoide é um biomarcador novo e promissor que pode predizer a internação, a capacidade funcional e a mortalidade na insuficiência cardíaca. OBJETIVO: Nosso objetivo foi investigar a associação da depressão aos níveis séricos de hormônio da paratireoide em pacientes com insuficiência cardíaca sistólica. MÉTODOS: Cem pacientes ambulatoriais consecutivos com IC sistólica com fração de ejeção do ventrículo esquerdo < 40% foram examinados prospectivamente. Todos os pacientes foram submetidos a exames laboratoriais, incluindo análises de peptídeo natriurético cerebral e de hormônio da tireoide. Os pacientes foram convidados a completar o Inventário de Depressão de Beck-II. RESULTADOS: Cinquenta e um pacientes (51%) apresentavam escore de BDI ruim (escore de BDI > 18). Esses pacientes apresentavam níveis de hormônio da paratireoide significativamente mais elevados em comparação com aqueles com bons escores de BDI (133 ± 46 pg/ml versus 71 ± 26 pg/ml, p < 0,001). No modelo de regressão logística multivariada, constatou-se que o nível do hormônio da tireoide (razão de chances (OR) = 1.035, p = 0,003), fração de ejeção do ventrículo esquerdo (OR = 0,854, p = 0,004), classe funcional III / IV (OR = 28,022, p = 0,005), C-reactive protein (CRP) (OR = 1,088, p = 0,020) e presença de edema pré-tibial (OR = 12,341, p = 0,033) constituíam preditores independentes de depressão moderada a importante após o ajuste de outros possíveis fatores de confusão. CONCLUSÃO: Pacientes com insuficiência cardíaca sistólica com depressão moderada a importante apresentavam níveis séricos elevados de hormônio da tireoide e CRP, capacidade funcional ruim e fração de ejeção do ventrículo esquerdo mais baixa. A associação da depressão com esses parâmetros pode explicar a contribuição da depressão para a internação e a mortalidade na insuficiência cardíaca.

A new species of Tmesiphantes (Araneae, Theraphosidae) from the state of Pará, Brazil

A new species of Tmesiphantes Simon, 1892, T. aridai sp. nov., is described and illustrated based on three males and three females collected at the Floresta Nacional do Tapajós, Santarém, state of Pará, Brazil. Males can be distinguished from T. perp Guadanucci & Silva, 2012 by the palpal bulb with an inconspicous tegular basal projection, but presenting a very slender embolus with shorter keels not extending to the tip, and from T. nubilus Simon, 1892 by the tibial apophysis with two similarly sized branches, the prolateral one with a strong spine on the retrolateral margin. Females resemble T. nubilus by the aspect of the seminal receptacle but the constriction near the apex is less evident and apex shape is irregular. The new species represents the first record of Tmesiphantes from the Amazonian region, bringing the total number of species to eight.

A new species of Phrixotrichus (Araneae, Theraphosidae) from southwestern Argentina and new distributional data for P. vulpinus

ABSTRACT A new species of Phrixotrichus Simon, 1889, P. pucara sp. nov., is described and illustrated based on a male from Pucará river, Neuquén province, Argentina. Male can be distinguished from all other species of the genus by the presence of a long strong spine on inner face of prolateral branch of tibial apophysis; also, it differs from P. scrofa (Molina, 1788) and P. vulpinus (Karsch, 1880) by a serrated prolateral keel of the male palpal bulb. Male resembles P. jara Perafán & Pérez-Miles, 2014 but can be distinguished by the uniform color on dorsal cephalothorax and by the palpal organ morphology being wider on the bulb base and embolus shorter and thicker, with the tip of embolus not so directed retrolaterally and prolateral keel bearing a serrated edge with three teeth. Additionally, P. vulpinus is reported for the first time for Argentina along with new distributional data.

Angiotensin II favors progression to heart failure in diabetic hearts: role of myocardial fatty acid oxidation downregulation

Purpose: Diabetic myocardium is particularly vulnerable to develop heart failure in response to chronic stress conditions including hypertension or myocardial infarction. We have recently observed that angiotensin II (Ang II)-mediated downregulation of the fatty acid oxidation pathway favors occurrence of heart failure by myocardial accumulation of lipids (lipotoxicity). Because diabetic heart is exposed to high levels of circulating fatty acid, we determined whether insulin resistance favors development of heart failure in mice with Ang II-mediated myocardial remodeling.Methods: To study the combined effect of diabetes and Ang II-induced heart remodeling, we generated leptin-deficient/insulin resistant (Lepob/ob) mice with cardiac targeted overexpression of angiotensinogen (TGAOGN). Left ventricular (LV) failure was indicated by pulmonary congestion (lung weight/tibial length>+2SD of wild-type mice). Myocardial metabolism and function were assessed during in vitro isolated working heart perfusion.Results: Forty-eight percent of TGAOGN mice without insulin resistance exhibited pulmonary congestion at the age of 6 months associated with increased myocardial BNP expression (+375% compared with WT) and reduced LV power (developed pressure x cardiac output; -15%). The proportion of mice presenting heart failure was markedly increased to 71% in TGAOGN mice with insulin resistance (TGAOGN/Lepob/ob). TGAOGN/Lepob/ob mice with heart failure exhibited further increase of BNP compared with failing non-diabetic TGAOGN mice (+146%) and further reduction of cardiac power (-59%). Mice with insulin resistance alone (Lepob/ob) did not exhibit signs of heart failure or LV dysfunction. Myocardial fatty acid oxidation measured during in vitro perfusion was markedly increased in non-failing hearts from Lepob/ob mice (+380% compared with WT) and glucose oxidation decreased (-72%). In contrast, fatty acid and glucose oxidation did not differ from Lepob/ob mice in hearts from TGAOGN/Lepob/ob mice without heart failure. However, both fatty acid and glucose oxidation were markedly decreased (-47% and -48%, respectively, compared with WT/Lepob/+) in failing hearts from TGAOGN/Lepob/ob mice. Reduction of fatty acid oxidation was associated with marked reduction of protein expression of a number of regulatory enzymes implied in fatty acid oxidation.Conclusions: Insulin resistance favors the progression to heart failure during chronic exposure of the myocardium to Ang II. Our results are compatible with a role of Ang II-mediated downregulation of fatty acid oxidation, potentially promoting lipotoxicity.

Pseudarthroses aseptiques des os longs [Pseudarthrosis of the long bones].

5 to 10% of all fractures present with a delayed union, whereas 1 to 5% progress to a nonunion, which can be defined as a fracture older than 6 months and lacks any potential to heal without any further intervention. Different fracture and patient related risk factors exist, and the management of a nonunion needs a thorough clinical, radiological and biological workup to classify them in one of the two main categories, the viable nonunions that need essentially more stability, usually by a more rigid fixation, and the non-viable nonunions that need essentially a biological stimulation by decortication and bone grafting. This treatment still remains the first choice with bony healing obtained in 85 to 95% of cases, but it also comes along with certain risks, and some valuable alternatives exist if chosen on the basis of rigid criteria.

Age-period-cohort analysis of oral cancer mortality in Europe: the end of an epidemic?

Over the last decade, mortality from oral and pharyngeal cancer has been declining in most European countries, but it had been increasing substantially in Hungary, Slovakia and a few other countries of central Europe, reaching rates comparable to those of lung cancer in several western European countries in males. To update trends in oral cancer mortality and further analyse the recent epidemic in central Europe, official death certifications for oral and pharyngeal cancer for 37 European countries were derived over the period 1970-2007, and an age-period-cohort model was fitted for selected countries. Male oral cancer mortality continued to decline in most European countries, including the Russian Federation, and, more importantly, it also started to decline in some of the countries with the highest male rates, i.e. Hungary and Slovakia; persisting rises were, however, observed in Belarus, Bulgaria and Romania. Oral cancer mortality rates for women were lower than in men and showed no appreciable trend over recent periods in the EU overall. Estimates from the age-period-cohort analysis for most selected countries showed a fall in effects for the cohorts born after the 1950s. For the period effect displayed a rise for the earlier periods, an inversion in the 1990s and a continuous fall up to the last studied period. Only some former non-market economy countries, like Romania, Ukraine and Lithuania, had rising cohort effect trends up to most recent generations. The major finding of this updated analysis of oral cancer mortality is the leveling of the epidemic for men in most European countries, including Hungary and other central European countries, where mortality from this cancer was exceedingly high. These trends essentially reflect the changes in alcohol and tobacco consumption in various populations.

Treatment of large bone defects with the Ilizarov technique.

Between 1985 and 1990 we treated 11 large segmental bone defects (average 6.7 cm) in ten patients with the Ilizarov technique. Open fractures, type III according to Gustilo, represented the largest group (8 of 11 cases). The average delay before the Ilizarov technique was initiated was 8.9 months. The external fixator was usually maintained for 1 year. Bone regeneration was obtained in every case. Consolidation was not fulfilled with this technique in three cases. The complications observed were one refracture, four leg-length discrepancies (average 1.5 cm), and five axial deformities exceeding 5 degrees. No pin-track infection was observed. In our limited series of four type IIIC open fractures treated by the Ilizarov technique, no patients required amputation. The Ilizarov technique is particularly useful in the treatment of large bone defects, without major complications, especially if there is an adequate initial debridement.

Assessment and analysis of mechanical allodynia-like behavior induced by spared nerve injury (SNI) in the mouse

Rrésumé: La première description dans une publication médicale des douleurs neuropathiques remonte à 1872, le Dr S.W. Mitchell les résumant ainsi [...]" la causalgie est la plus terrible des tortures qu'une lésion nerveuse puisse entraîner "[...]. Par définition, la douleur neuropathique est une douleur chronique faisant suite à une lésion ou dysfonction du système nerveux. Malgré les progrès faits dans la compréhension de ce syndrome, le détail des mécanismes impliqués nous échappe encore et son traitement reste insuffisant car moins de 50% des patients sont soulagés par les thérapies actuelles. Différents modèles expérimentaux ont été élaborés chez l'animal de laboratoire, en particulier des modèles de lésion de nerfs périphériques chez le rat, permettant des investigations tant moléculaires que fonctionnelles des mécanismes impliqués dans le développement de ces douleurs. En revanche, peu de modèles existent chez la souris, alors que cet animal, grâce à la transgénèse, est très fréquemment utilisé pour l'approche fonctionnelle ciblée sur un gène. Dans l'étude présentée ici, nous avons évalué chez la souris C57BL/6 l'adaptation d'un modèle neuropathique, proposé une nouvelle modalité de mesure de la sensibilité douloureuse adaptée à la souris et défini une méthode d'analyse performante des résultats. Ce modèle, dit de lésion avec épargne nerveuse (spared Werve injury, SNI), consiste en la lésion de deux des trois branches du nerf sciatique, soit les nerfs peronier commun et tibial. La troisième branche, le nerf sural est laissé intact et c'est dans le territoire cutané de ce dernier que la sensibilité douloureuse à des stimulations mécaniques est enregistrée. Des filaments calibrés de force croissante sont appliqués sur la surface de la patte impliquée et la fréquence relative de retrait de la patte a été modélisée mathématiquement et analysée par un modèle statistique intégrant tous les paramètres de l'expérience (mixed-effects model). Des variantes chirurgicales lésant séquentiellement les trois branches du nerf sciatique ainsi que la réponse en fonction du sexe de l'animal ont également été évaluées. La lésion SNI entraîne une hypersensibilité mécanique marquée comparativement aux souris avec chirurgie contrôle; cet effet est constant entre les animaux et persiste durant les quatre semaines de l'étude. De subtiles différences entre les variables, y compris une divergence de sensibilité mécanique entre les sexes, ont été démontrées. La nécessité de léser le nerf tibial pour le développement des symptômes a également été documentée par notre méthode d'évaluation et d'analyse. En conclusion, nous avons validé le modèle SNI chez la souris par l'apparition d'un symptôme reproductible et apparenté à l'allodynie mécanique décrite par les patients souffrant de douleurs neuropathiques. Nous avons développé des méthodes d'enregistrement et d'analyse de la sensibilité douloureuse sensibles qui permettent la mise en évidence de facteurs intrinsèques et extrinsèques de variation de la réponse. Le modèle SNI utilisé chez des souris génétiquement modifiées, de par sa précision et reproductibilité, pourra permettre la discrimination de facteurs génétiques et épigénétiques contribuant au développement et à la persistance de douleurs neuropathiques.

Estudio de la alineación rotacional en la artroplastia total de rodilla mediante tomografía computarizada

L'alineació rotacional a l'astroplàstia total de genoll es refereix a la posició dels implants en el pla axial. Un mínim desplaçament afectarà la distribució de la càrrega y variarà l'estabilitat, l'alineació i la cinemàtica de l'articulació. Tot i que hi ha un consens pel que fa als efectes adversos d'una alineació rotacional incorrecta, encara no està clar quines són les referències anatòmiques que cal utilitzar. Les mesures de l'alineació rotacional requereixen un estudi d'alta qualitat. La TC és la modalitat d'imatge d'elecció per a l'estudi postoperatori de l'artroplàstia total de genoll. L'objectiu d'aquest treball es avaluar la capacitat diagnòstica de la TC per a l'estudi de l'alineació rotacional postoperatòria en l'artroplàstia total de genoll i presentar les variacions en el protocol de TC que minimitzen l'artefacte metàl•lic. Aquest estudi avalua la reproductibilitat de l'angle condili posterior, format per l'eix epicondili quirúrgic i la línia bicondilia posterior, mesurant la correlació entre dos observadors. El coeficient de correlació de Pearson mostra una forta correlació positiva (R=0.84) entre els dos observadors. La mitja d'error de les mesures adquirides és de -0.14º amb una desviació estàndar de 2.06º (-0.14 ± 2.06), per la qual cosa la modificació dels paràmetres tècnics de la TC per a la minimització dels artefactes metàl•lics és eficaç per l'avaluació rotacional. No obstant, l'alta magnitud de l'error indica que el radiòleg ha de ser prudent en el diagnòstic de mínimes variacions angulars que impliquin canvis en l'actitud mèdica i terapèutica.

La Atlántida : la sociedad perfecta

Si Platón creó el mito de la Atlántida para ilustrar la sociedad perfecta de su 'República', entonces otros, siglos después, recogieron el testigo para utilizarlo con sus peores o mejores intenciones.