Evaluation of Reducibility of Trunk Asymmetry in Lateral Bending

The value of the lateral bending test is important in the assessment of spinal curve mobility and prediction of surgical outcome in the treatment of adolescent idiopathic scoliosis (AIS). However, radiographic bending tests are unable to assess the reducibility of trunk asymmetry. This study aims to exploit surface topography measurement in order to evaluate the changes in shape of the trunk (a) between bending and neutral standing positions, and (b) between standing pre- and post-operative visits, in a cohort of adolescents with AIS having undergone surgical correction; and to correlate the differences measured in cases (a) and (b). Our cohort includes 13 patients with right thoracic AIS. Each patient had their 3D trunk surface digitized with a multi-head InSpeck system in standing posture (at the pre-op and post-op visits) and in maximum voluntary right and left bending (at the pre-op visit). We developed a novel trunk shape analysis method which produces a set of inclined trunk cross-sections allowing comparison between different postures. Two asymmetry indices, trunk rotation (TR) and back surface rotation (BSR), were computed in all cases and a statistical analysis was performed. Our correlation study (Pearson test) showed fair correlations in most cases between the changes in side-bending and those post-surgery, with the strongest relationship (p-value < 0.01) when combining the TR measurements from both bendings. These results provide evidence that the bending test can be used to assess trunk asymmetry reducibility. The proposed approach could provide a non-invasive trunk asymmetry reducibility test for routine clinical use in AIS surgery planning.

Influence of Interface Surface Geometries In The Tensile Characteristics Of Friction Welded Joints From Aluminium Alloys

Friction welding is a solid state joining process that produces coalescence in materials, using the heat developed between surfaces through a combination of mechanical induced rubbing motion and applied load. In rotary friction welding technique heat is generated by the conversion of mechanical energy into thermal energy at the interface of the work pieces during rotation under pressure. Traditionally friction welding is carried out on a dedicated machine because of its adaptability to mass production. In the present work, steps were made to modify a conventional lathe to rotary friction welding set up to obtain friction welding with different interface surface geometries at two different speeds and to carry out tensile characteristic studies. The surface geometries welded include flat-flat, flat-tapered, tapered-tapered, concave-convex and convex-convex. A comparison of maximum load, breaking load and percentage elongation of different welded geometries has been realized through this project. The maximum load and breaking load were found to be highest for weld formed between rotating flat and stationary tapered at 500RPM and the values were 19.219kN and 14.28 kN respectively. The percentage elongation was found to be highest for weld formed between rotating flat and stationary flat at 500RPM and the value was 21.4%. Hence from the studies it is cleared that process parameter like “interfacing surface geometries” of weld specimens have strong influence on tensile characteristics of friction welded joints

A Comparative Study Of Tensile And Microstructural Characteristics Of Friction Welded Joints And Conventionally Welded Joints Of Aluminium Alloy 6061

Welding of high strength and low weight materials like Aluminium Alloys without any defects by conventional welding techniques is a major challenge in industries. Hence research on solid state welding techniques like Friction stir welding and Friction welding techniques have got much importance in joining of Aluminium alloys. However most of the industries are not changing conventional techniques as skilled workers are available on that area. Most common conventional welding techniques used for joining of Aluminium alloys are Gas welding and Arc welding. Friction welding is a solid-state welding process that generates heat through mechanical friction between a moving and a stationary component with the addition of a lateral force called “upset” to plast ically displace and fuse the materials. In this work, experimental study on tensile and micro structural characteristics of welded joints formed from conventional welding techniques and Rotary friction welding(suitable for weld specimens with circular cross section) has been carried out and the same were compared. The process parameters for arc welding used was 50-70 Amp reverse polarity DC and electrodes of 2.3mm diameter. In Gas welding, the parameters were oxy acetylene neural flame at 3200°C and 3mm electrodes . In the case of friction welding an axial pressure loading of 3Mpa with 5 MPa as upsetting pressure and 500 rpm were used to obtain good welded joints. Tensile characteristic studies of Arc welded joints and Gas welded joints showed 48% and 60 % variations respectively from the maximum load bearing characteristics of parent metal. In the case of friction welded joint, the variation was found to 46%. Micro structural evaluation of conventionally welded joints exhibited clear distinct zones of various weld regions. In the case of friction welded joint micro structural photographs showed comparable features both in parent metal and welded region. Thus the tensile characteristic study and microstructure evaluations proved that friction welded joints are good in both aspects compared to conventionally welded joints.

Hemorragia postparto en pacientes con obesidad y/o anemia durante el embarazo: revisión sistemática

Introducción: actualmente la anemia y la obesidad durante el embarazo se consideran factores de riesgo modificables para hemorragia postparto. Estos pueden ser evitados desde el control prenatal y su manejo preconcepcional contribuye de una forma importante en la reducción de la morbimortalidad materno y perinatal. Metodología: se realizó una revisión sistemática de literatura con componente meta-analítico según la evidencia disponible hasta la fecha. Los términos mesH incluyeron postpartum hemorrhage, severe anemia, overweight, obesity entre otros. Todos los artículos fueron clasificados por su evidencia antes de calcular el componente meta-analítico. Resultados: se encontraron un total de 321 artículos relacionados con anemia, y 276 para obesidad, de los cuales 8 y 14 respectivamente cumplieron criterios para su selección. La mayoría de artículos fueron clasificados como evidencia IV para anemia y II-III para obesidad. Las causas más frecuentes de exclusión fueron el título y el tipo de estudio. Tanto la anemia como la obesidad (clasificada por IMC) muestran OR conjuntos no estadísticamente significativo y con intervalos de confianza amplios, aunque la tendencia de riesgo conjunto es a mayor peso, mayor riesgo de hemorragia. Discusión: los resultados de la revisión sistemática permiten mostrar tanto a la anemia como la obesidad como factores que muestran una tendencia al riesgo para hemorragia postparto, sin resultados estadísticamente significativos. Faltan más estudios sobre el tema en el país.MetodologíaSe realizó una revisión sistemática de literatura con componente meta-analítico según la evidencia disponible hasta la fecha. Los términos mesH incluyeron postpartum hemorrhage, severe anemia, overweight, obesity entre otros. Todos los artículos fueron clasificados por su evidencia antes de calcular el componente meta-analítico. ResultadosSe encontraron un total de 321 artículos relacionados con anemia, y 276 para obesidad, de los cuales 8 y 14 respectivamente cumplieron criterios para su selección. La mayoría de artículos fueron clasificados como evidencia IV para anemia y II-III para obesidad. Las causas más frecuentes de exclusión fueron el título y el tipo de estudio. Tanto la anemia como la obesidad (clasificada por IMC) muestran OR conjuntos no estadísticamente significativo y con intervalos de confianza amplios, aunque la tendencia de riesgo conjunto es a mayor peso, mayor riesgo de hemorragia. DiscusiónLos resultados de la revisión sistemática permiten mostrar tanto a la anemia como la obesidad como factores que muestran una tendencia al riesgo para hemorragia postparto, sin resultados estadísticamente significativos. Faltan más estudios sobre el tema en el país.

Teleconsultation in sexual and reproductive health for young adults through mobile devices: Experience in Colombia

Background: Sexual risk behaviors associated with poor information on sexuality have contributed to major public health problems in the area of sexual and reproductive health in teenagers and young adults in Colombia. Objective: To measure the perception of changes in sexual and reproductive risk behavior after the use of a teleconsultation service via mobile devices in a sample of young adults. Methods: A before and after observational study was designed, where a mobile application to inquire about sexual and reproductive health was developed. The perception of changes in sexual and reproductive health risk behaviors in a sample of young adults after the use of the application was measured using the validated survey “Family Health International (FHI) – Behavioral Surveillance Survey (BSS) – Survey for Adults between 15 to 40 Years”. Non-probabilistic convenience recruitment was undertaken through the study´s web page. Participants answered the survey online before and after the use of the mobile application for a six month period (intervention). For the inferential analysis, data was divided into three groups (dichotomous data, discrete quantitative data, and ordinal data), to compare the results of the questions between the first and the second survey. For all tests, a confidence interval of 95% was established. For dichotomous data, the Chi-squared test was used. For quantitative data, we used the Student’s t-test, and for ordinal data, the Mann-Whitney-Wilcoxon test. Results: A total of 257 subjects were registered in the study and met the selection criteria. The pre-intervention survey was answered by 232 subjects, and 127 completely answered the post-intervention survey, of which 54.3% did not use the application, leaving an effective population of 58 subjects for analysis. 53% (n=31) were female, and 47% (n=27) were male. The mean age was 21 years, ranging between 18 and 40 years. The differences between the answers on the first and the second survey were not statistically significant. The main risk behaviors identified in the population were homosexual relations, non-use of condoms, sexual relations with non-regular and commercial partners, the use of psychoactive substances, and ignorance about the symptoms of sexually transmitted diseases and HIV transmission. Conclusions: Although there were no differences between the pre- and post-intervention results, the study revealed different risk behaviors among the participating subjects. These findings highlight the importance of promoting educational strategies on this matter and the importance of providing patients with easily accessible tools with reliable health information.

Módulo en multimedia para la asignatura de metalurgia y soldadura del Instituto Técnico Central de la Salle

El objetivo de este trabajo, es el de implementar un módulo autoformativo para facilitar el proceso de aprendizaje de la asignatura Metalurgia y soldadura del Instituto Técnico Central. Antes de entrar en detalle sobre el tema, se exponen teorías

Créditos e insolvencia

Esta obra se encuentra estructurada en dos grandes partes. En la primera parte, el lector encontrará generalidades sobre los créditos y las maneras en que los mismos pueden hacerse valer al interior de un proceso concursal. Aspectos como la insinuación del crédito, su reconocimiento al interior de estos procesos y la impugnación, son trabajados de manera extensa, indicando en cada caso, de manera precisa, la regulación a aplicar para cada uno de estos momentos procesales al interior del concurso de acreedores. En la segunda parte, encontrarán un estudio detallado de los créditos privilegiados al interior del proceso concursal. Como podrá apreciarse, se trata de una obra comprensiva de todos los aspectos que una persona interesada en un proceso concursal, cualquiera sea su posición al interior del mismo (deudor, acreedor, etc.), debe tener en cuenta para resolver todas las dudas que le surjan, aspectos todos abordados con la mayor rigurosidad y profundidad. Como podrá apreciarse, se trata de una obra comprensiva de todos los aspectos que una persona interesada en un proceso concursal, cualquiera sea su posición al interior del mismo (deudor, acreedor, etc.), debe tener en cuenta para resolver todas las dudas que le surjan, aspectos todos abordados con la mayor rigurosidad y profundidad.

Engagement y productividad en las empresas

El presente trabajo pretende mostrar algunos avances en el término “engagement”, y como puede ser implementado en las organizaciones, teniendo en cuenta los diferentes factores que intervienen, para que los trabajadores se sientan “engaged” dentro de la organización. Además busca relacionar las diferentes habilidades y tipos de liderazgo que los altos mandos utilizan con sus empleados y como éste afecta la productividad de los trabajadores en las organizaciones. Para esto, se realizó una investigación de las clases de liderazgo y los comportamientos de los altos mandos, que pueden afectar positiva y negativamente el vínculo y sentido de pertenencia que tienen los trabajadores con la empresa en la que trabajan. Considerando importante las habilidades del liderazgo transformacional, para lograr desarrollar algún grado de engagement en los trabajadores, lo cual genera a su vez, un alza en la productividad de sus resultados dentro de la organización.

Diabetes gestacional como factor de riesgo para incontinencia urinaria: revisión sistemática de la literatura

La diabetes mellitus es una de las patologías frecuentes durante el embarazo, existe literatura que la ha relacionado con un mayor riesgo de aparición de incontinencia urinaria en el postparto patología que de manera clara afecta la calidad de vida de las mujeres, pero a la fecha la literatura no es concluyente. Con la presente revisión sistemática se pretendió evaluar la evidencia relacionada con la diabetes gestacional como causa de incontinencia urinaria en el postparto.