Equity Carve Out : desde la óptica del PMO

Un Equity Carve Out, también conocido como escisión IPO o escisión parcial de empresas, constituye un tipo de reorganización corporativa, en la que una empresa crea una nueva filial a partir de la separación de una de sus actividades, negocios o servicios. Estas operaciones empresariales actualmente constituyen unas de las prácticas más comunes usadas por las compañías para conseguir financiación. El capital entrante por la venta de parte o la totalidad de la filial, justificará por un lado el esfuerzo invertido en el proceso y por otro abrirá nuevos caminos para la empresa recién constituida. Pero la mayor parte de estos procesos son de una complejidad elevada, tanto si se ven desde la óptica externa a la empresa, como interna. Por un lado las valoraciones bursátiles, dadas las actuales circunstancias económicas, no son las mejores. Y por otro, los proyectos de escisión tienen demasiados puntos críticos para considerarlos sencillos o mecánicos de ejecución. Este documento se centrará en dar solución a la problemática interna que afrontan las empresas una vez tomada la decisión de escindir una actividad: ¿cómo gestionar el proceso? Desde la experiencia y el conocimiento empresarial, se propone como solución: un proyecto completo, coherente y estructurado de escisión; y un PMO o responsable de proyecto, para dirigirlo. Durante todo el documento se repasarán todos y cada uno de los pasos que debe tener en consideración y llevar bajo control el PMO, para acabar el equity carve out en 5 meses. Se definirá un proyecto completo describiendo los pasos necesarios para: • Construir nueva empresa y las relaciones con su ecosistema. • Definir todas las operaciones de negocio necesarias para garantizar su operatividad. • Crear las estructuras necesarias que soporten todas las operaciones y procesos. Para ello y dentro de una planificación global, se propone el trabajo diario con todos los departamentos que tengan algún tipo de involucración en el proceso: operaciones, legal, recursos humanos, financiero, fiscal, TI, marketing y comunicación y compras. Todos estos departamentos o líneas de trabajo tendrán tareas y objetivos particulares. El documento servirá de manual, para que el PMO tenga una visión cuasi-completa de lo que hay que hacer en cada momento, con qué profesionales trabajar y con qué propósito. ---ABSTRACT---An Equity Carve Out, also named as excision or partial IPO excision of companies, is a type of corporate reorganization in which a company creates a new one from the separation of one of its activities, business or services. Currently these business operations constitute one of the most common practices used by companies to get funding. The capital that comes from the sale of part or the totality of the subsidiary, justifies the effort invested in the process on one hand, and on the other opens new perspectives for the newly formed company. But most of these processes are highly complex, whether viewed from outside the company, or from inside. On one side, stock valuations, taking into account the current economic circumstances, are not the best. And on the other side, excision projects have too many critical points to consider the projects simple or mechanical. This document is focused on resolving the internal problems faced by enterprises, once the decision of spinning off the activity is taken: how to manage the process? From the experience and business knowledge, we propose as solution: a complete, coherent and structured excision project; and a PMO or Project Officer leading it. Throughout the document, each and every step that the PMO must take into consideration will be reviewed, in order to finish the equity carve-out in 5 months. A complete project will be defined by describing the steps necessary to: • Build new business and relationships with its ecosystem. • Define all business operations necessary to ensure their operability. • Create the necessary structures that support all operations and processes. Within the Global Planning, we will propose daily work with all the departments that have some sort of involvement in the process: operations, legal, human resources, financial, taxes, IT, marketing communication and purchases. All these departments or working lines have their own tasks and goals. The document could be used as a manual for the PMO in order to have a near-complete picture of what to do anytime, with what professionals he/she would work and for what purpose.

Nueva estrategia de mercado en el sector de la moda: "Caso Blanco"

Este proyecto está realizado bajo el punto de vista del director de estrategia de la compañía, y tomando como punto de partida la situación de la marca a fecha de la adquisición por parte del grupo Alhokair, Enero del 2014. El objetivo es presentar al nuevo propietario de Blanco la estrategia a seguir, para no perder la esencia de la marca y a su vez generar valor, tanto económico como corporativo. Para su desarrollo es necesario disponer de información del sector veraz y contrastable. Por ello el estudio se realizará en base a la documentación obtenida de entidades fiables (cifras de negocio, situación de los mercados correspondientes al sector de la moda, entre otros datos mostrados); como son ACOTEX (Asociación Empresarial del Comercio Textil y Complementos, representativa de los empresarios y autónomos del sector y fundada en 1977), el ICEX (entidad pública empresarial de ámbito nacional encargada de promover la internacionalización de las empresas españolas), el INE (Instituto Nacional de Estadística) y el BORME (Boletín Oficial del Registro Mercantil). También en base a potenciales publicaciones web del sector como Modaes.es2, y prensa económica; Expansión3, Cinco días4 y el Economista5. Además de estas publicaciones y organismos, existen una gran cantidad de especialistas del sector que escriben artículos en prensa y en blogs, y que realizan charlas en importantes escuelas de moda y eventos, que han sido de gran ayuda para poder posicionarme con ‘comodidad’ en el rol que he asumido. Toda esta información; cuantitativa y cualitativa, basada en cifras, datos, estadísticas, conocimientos, experiencia y opiniones, junto con los conocimientos adquiridos en el Máster de Consultoría de Gestión de Empresas, principalmente en el módulo de estrategia, pero apoyándome e hilando con en el resto de módulos, he realizado este análisis y plan de acción con el fin de hacer renacer a Blanco. ---ABSTRACT---This project is conducted by the view of the director of company strategy, and taking as starting point the status of the brand as of the acquisition by the Alhokair group in January 2014. Aims to present the new owner Blanco's strategy to continue to keep the essence of the brand and in turn create economic and corporate value. For its development is necessary to have accurate and verifiable information of the sector. Therefore, the study will be based on documentation obtained from reliable entities. All quantitative and qualitative information based on facts, figures, statistics, knowledge, experience and views, along with the knowledge acquired in the Máster de Consultoría de Gestión de Empresas, mainly in the form of strategy, but leaning and spinning with the other modules, I have performed this analysis and action plan in order to be reborn Blanco.

Polymer interaction with macroscopic carbon nanotube fibres and fabrication of nanostructured composites

El ensamblado de nanotubos de carbono (CNT) como una fibra macroscópica en la cual están orientados preferentemente paralelos entre sí y al eje de la fibra, ha dado como resultado un nuevo tipo de fibra de altas prestaciones derivadas de la explotación eficiente de las propiedades axiales de los CNTs, y que tiene un gran número de aplicaciones potenciales. Fibras continuas de CNTs se produjeron en el Instituto IMDEA Materiales mediante el proceso de hilado directo durante la reacción de síntesis por deposición química de vapores. Uno de los objetivos de esta tesis es el estudio de la estructura de estas fibras mediante técnicas del estado del arte de difracción de rayos X de sincrotrón y la elaboración de un modelo estructural de dicho material. Mediciones texturales de adsorción de gases, análisis de micrografías de electrones y dispersión de rayos X de ángulo alto y bajo (WAXS/SAXS) indican que el material tiene una estructura mesoporosa con una distribución de tamaño de poros ancha derivada del amplio rango de separaciones entre manojos de CNTs, así como una superficie específica de 170m2/g. Los valores de dimensión fractal obtenidos mediante SAXS y análisis Barrett-Joyner-Halenda (BJH) de mediciones texturales coinciden en 2.4 y 2.5, respectivamente, resaltando el carácter de red de la estructura de dichas fibras. La estructura mesoporosa y tipo hilo de las fibra de CNT es accesible a la infiltración de moléculas externas (líquidos o polímeros). En este trabajo se estudian los cambios en la estructura multiescala de las fibras de CNTs al interactuar con líquidos y polímeros. Los efectos de la densificación en la estructura de fibras secas de CNT son estudiados mediante WAXS/SAXS. El tratamiento de densificación junta los manojos de la fibra (los poros disminuyen de tamaño), resultando en un incremento de la densidad de la fibra. Sin embargo, los dominios estructurales correspondientes a la transferencia de esfuerzo mecánica y carga eléctrica en los nanotubos no son afectados durante este proceso de densificación; como consecuencia no se produce un efecto sustancial en las propiedades mecánicas y eléctricas. Mediciones de SAXS and fibra de CNT antes y después de infiltración de líquidos confirman la penetración de una gran cantidad de líquidos que llena los poros internos de la fibra pero no se intercalan entre capas de nanotubos adyacentes. La infiltración de cadenas poliméricas de bajo peso molecular tiende a expandir los manojos en la fibra e incrementar el ángulo de apertura de los poros. Los resultados de SAXS indican que la estructura interna de la fibra en términos de la organización de las capas de tubos y su orientación no es afectada cuando las muestras consisten en fibras infiltradas con polímeros de alto peso molecular. La cristalización de varios polímeros semicristalinos es acelerada por la presencia de fibras de CNTs alineados y produce el crecimiento de una capa transcristalina normal a la superficie de la fibra. Esto es observado directamente mediante microscopía óptica polarizada, y detectado mediante calorimetría DSC. Las lamelas en la capa transcristalina tienen orientación de la cadena polimérica paralela a la fibra y por lo tanto a los nanotubos, de acuerdo con los patrones de WAXS. Esta orientación preferencial se sugiere como parte de la fuerza impulsora en la nucleación. La nucleación del dominio cristalino polimérico en la superficie de los CNT no es epitaxial. Ocurre sin haber correspondencia entre las estructuras cristalinas del polímero y los nanotubos. Estas observaciones contribuyen a la compresión del fenómeno de nucleación en CNTs y otros nanocarbonos, y sientan las bases para el desarrollo de composites poliméricos de gran escala basados en fibra larga de CNTs alineados. ABSTRACT The assembly of carbon nanotubes into a macroscopic fibre material where they are preferentially aligned parallel to each other and to the fibre axis has resulted in a new class of high-performance fibres, which efficiently exploits the axial properties of the building blocks and has numerous applications. Long, continuous CNT fibres were produced in IMDEA Materials Institute by direct fibre spinning from a chemical vapour deposition reaction. These fibres have a complex hierarchical structure covering multiple length scales. One objective of this thesis is to reveal this structure by means of state-of-the-art techniques such as synchrotron X-ray diffraction, and to build a model to link the fibre structural elements. Texture and gas absorption measurements, using electron microscopy, wide angle and small angle X-ray scattering (WAXS/SAXS), and pore size distribution analysis by Barrett-Joyner-Halenda (BJH), indicate that the material has a mesoporous structure with a wide pore size distribution arising from the range of fibre bundle separation, and a high surface area _170m2/g. Fractal dimension values of 2.4_2.5 obtained from the SAXS and BJH measurements highlight the network structure of the fibre. Mesoporous and yarn-like structure of CNT fibres make them accessible to the infiltration of foreign molecules (liquid or polymer). This work studies multiscale structural changes when CNT fibres interact with liquids and polymers. The effects of densification on the structure of dry CNT fibres were measured by WAXS/SAXS. The densification treatment brings the fibre bundles closer (pores become smaller), leading to an increase in fibre density. However, structural domains made of the load and charge carrying nanotubes are not affected; consequently, it has no substantial effect on mechanical and electrical properties. SAXS measurements on the CNT fibres before and after liquid infiltration imply that most liquids are able to fill the internal pores but not to intercalate between nanotubes. Successful infiltration of low molecular weight polymer chains tends to expand the fibre bundles and increases the pore-opening angle. SAXS results indicate that the inner structure of the fibre, in terms of the nanotube layer arrangement and the fibre alignment, are not largely affected when infiltrated with polymers of relatively high molecular weight. The crystallisation of a variety of semicrystalline polymers is accelerated by the presence of aligned fibres of CNTs and results in the growth of a transcrystalline layer perpendicular to the fibre surface. This can be observed directly under polarised optical microscope, and detected by the exothermic peaks during differential scanning calorimetry. The discussion on the driving forces for the enhanced nucleation points out the preferential chain orientation of polymer lamella with the chain axis parallel to the fibre and thus to the nanotubes, which is confirmed by two-dimensional WAXS patterns. A non-epitaxial polymer crystal growth habit at the CNT-polymer interface is proposed, which is independent of lattice matching between the polymer and nanotubes. These findings contribute to the discussion on polymer nucleation on CNTs and other nanocarbons, and their implication for the development of large polymer composites based on long and aligned fibres of CNTs.

Stability analysis of a free falling pararotor

The pararotor is a decelerator device based on the autorotation of a rotating wing. When it is dropped, it generates an aerodynamic force parallel to the main motion direction, acting as a decelerating force. In this paper, the rotational motion equations are shown for the vertical flight without any lateral wind component and some simplifying assumptions are introduced to obtain analytic solutions of the motion. First, the equilibrium state is obtained as a function of the main parameters. Then the equilibrium stability is analyzed. The motion stability depends on two nondimensional parameters, which contain geometric, inertia, and aerodynamic characteristics of the device. Based on these two parameters a stability diagram can be defined. Some stability regions with different types of stability trajectories (nodes, spirals, focuses) can be identified for spinning motion around axes close to the major, minor, and intermediate principal axes. It is found that the blades contribute to stability in a case of spin around the intermediate principal inertia axis, which is otherwise unstable. Subsequently, the equations for determining the angles of nutation and spin of the body are obtained, thus defining the orientation of the body for a stationary motion and the parameters on which that position depends.

Sola romani: morteros hidráulicos romanos en la Península Ibérica

En esta investigación se han analizado morteros de cal de cronología romana en el interior de la Península Ibérica. Para ello, se seleccionó una serie de muestras procedentes de diversos yacimientos, y de estructuras de carácter industrial. Estas muestras presentan aditivos cerámicos y conglomerantes de cal, como característica principal. Desde un principio el esfuerzo debía de centrarse en los fragmentos cerámicos presentes en los morteros. Para ello se documentaron varios morteros con aditivos cerámicos, a fin de conocer sus características básicas (componentes, distribución, micro-estratigrafía, granulometría, etc.). Por ello, y una vez tomadas las muestras, ésta fueron tratadas y procesadas para desarrollar una primera fase de estudio por medio de macroscopía. Se obtuvieron buenos resultados en cuanto a la caracterización visual de los morteros, localizando y documentando los fragmentos cerámicos. Durante la observación de dichos aditivos se observó que los fragmentos cerámicos tenían unas coronas o anillos de coloración que recorrían el borde, justo al contacto con la matriz de cal. Fueron seleccionados algunos fragmentos en los que eran más visibles dichos anillos. A fin de conocer la posible relación entre algunos yacimientos cercanos y la presencia de dicho anillo cromáticos se desarrolló una microscopía óptica polarizada, realizando láminas delgadas de las muestras y sobre los fragmentos cerámicos más determinantes, en concreto de una serie de enclaves del valle del Henares. Además de caracterizar microscópicamente los morteros, se observó que los anillos no eran un defecto visual ni una alteración física, producida tal vez por la extracción, la fase del corte o por la cocción de la cerámica. Tras analizar varios ejemplares se pudo apreciar que esos anillos eran habituales en todas las muestras y que se presentaban de diferente manera, es decir, que se observaban en granos cerámicos de diferentes características físicas (cochura, tamaño, situación con respecto del conglomerante, etc.). A fin de conocer los aspectos químicos de dicha alteración se seleccionó un grupo de muestras en las que los resultados macroscópicos habían sido muy claros, y en las que la microscopía óptica polarizada había determinado en los bordes, áreas adecuadas para otros análisis. Se realizó un mapeado o mapping de elementos químicos, a fin de saber qué podía estar sucediendo en esa interfaz entre el fragmento cerámico y la matriz de cal. Gracias a los resultados obtenidos se comprobó que existía una acumulación potencial de calcio tanto en el interior de los granos cerámicos como en el exterior, justo en la zona de contacto con el conglomerante, formando manchas que recorrían longitudinalmente el borde. Estos datos fueron muy útiles para llevar a cabo la siguiente fase de estudio, que permitiría conocer puntualmente qué estaba sucediendo químicamente en esa zona de contacto. Finalmente y con el objetivo de describir química y puntualmente este efecto en las adiciones cerámicas, se volvió a seleccionar una serie de muestras, escogidas esta vez en función de los granos cerámicos que cumpliesen unas variables estadísticas. Se eligieron granos con distintos tipos de cocciones, así como granos con tamaños diversos y granos con aditivo ceniciento en la matriz de cal, pensando que podrían ser las variables más útiles de interpretar de existir algún tipo de cambio químico entre la arcilla cocida y la matriz de cal. Tales variables se adaptaron a un sistema estadístico multi-varial y geométrico, con el objetivo de sintetizar los resultados y visualizar de forma óptima los datos en conjunto, como se ha comentado en varias ocasiones en este trabajo. Una vez seleccionados los granos por variables se procedió a realizar un análisis lineal y espectral semi-cuantitativo de SEM-EDX, con el que se caracterizaba químicamente una sección lineal del grano, desde la matriz de arcilla cocida de la cerámica hasta la matriz de cal –del interior al exterior del grano- pasando por el centro de la banda de reacción. Este análisis permitió determinar que se había producido una serie de cambios químicos porcentuales en los granos de cerámica. Dichos cambios se resumen en un incremento global de los porcentajes de calcio en el interior de las bandas de reacción de la cerámica, desde el borde mismo del anillo hasta el exterior. Así también se observaron picos porcentuales en el interfaz del fragmento cerámico con la matriz de cal, lo que confirmaba los resultados obtenidos por medio del mapping. Globalmente en todas las muestras se apreció un hombro en las gráficas de calcio a su paso por la zona de afección del anillo de reacción. Los restantes porcentajes de magnesio, silicio y aluminio se mantienen normales. En esta tesis se ha confirmado que dicho incremento global de calcio se acentúa en las muestras en donde no hay cenizas en la matriz de cal. Los casos correspondientes a estos granos sufren un incremento mayor que en el resto. La segunda variable que sufre un mayor incremento de calcio es la que corresponde a granos con buena cocción de la arcilla. Por lo tanto, parece que la tercera variable, la que corresponde con el tamaño del fragmento cerámico, no es decisiva. Por lo tanto, teniendo en cuenta la prueba visual de los anillos de reacción, y atendiendo a los resultados químicos, podríamos pensar que ese incremento de calcio en la banda de reacción de los fragmentos cerámicos se debió a una absorción de calcio en el interior de la arcilla cocida en la fase inmediatamente previa al fraguado, incluso durante el apagado de la cal. Es en este punto donde estaría la clave del cambio químico que se produce en esta interfaz, el calcio sílice-aluminato del que algunos autores ya han investigado. Esta absorción de calcio en el interior del grano no vendría sola, sino que generaría una costra de cal en el interfaz exterior de la cerámica, la cual ha sido observada químicamente por mapping y mineralógicamente por medio de microscopía óptica de polarización. La consecuencia de estos resultados es, primero, la mejora de nuestro conocimiento general acerca del factor hidráulico en los morteros. Asimismo se aprecia que la incorporación de materiales orgánicos como cenizas, puede alterar los porcentajes de calcio en el interior de los aditivos cerámicos, por lo que habría que sopesar, en trabajos futuros, si este tipo de material es adecuado o no en las mezclas destinadas a la restauración, así como seguir indagando en las propiedades de los morteros con la incorporación de aditivos orgánicos. Desde el punto de vista de la catalogación de los suelos industriales hidráulicos de época romana, además de mejorar la documentación incorporando micro-estratigrafías y granulometrías, la investigación de este material histórico constructivo mejora en cuanto a que se incorporan ensayos sencillos, que facilitan incluso la peritación de un estado de conservación por medio de una lupa binocular. Arqueológicamente hablando, es muy interesante correlacionar fábricas diferentes de estructuras situadas o bien en un mismo yacimiento, o bien en una misma área regional. Los estudios de caracterización y micro-estratigrafía no sólo aportan datos nuevos de cara a la restauración de morteros, sino que crean la posibilidad de generar patrones constructivos que sirvan de fósiles-guía para datar relativamente a unas estructuras o a otras. En lo referido a los resultados obtenidos en los diferentes complejos arqueológicos se ha observado una diferencia entre los morteros destinados a piletas y cubetas con respecto a los suelos industriales de uso indeterminado. La muestra correspondiente al yacimiento de Las Arenas no dispone de ninguna micro-estratigrafía, como sí por el contrario en las muestras obtenidas en Rotonda de Mejorada, Val de la Viña y La Magdalena. En estos enclaves las estructuras presentan grandes similitudes, con diferentes niveles constructivos empleando morteros de cal con áridos y gravas en las capas interiores, y áridos con adiciones cerámicas en las exteriores. En lo relativo a la granulometría las adiciones cerámicas de las muestras de Val de la Viña y La Magdalena presentan varias coincidencias en cuanto al tamaño de los granos y la distribución. Asimismo, de las muestras tomadas en La Magdalena, existe una gran diferencia entre las muestras MG1, MG2, MG3 y MG4 con respecto a las muestras MG5 y MG6, correspondientes éstas últimas a un mortero con fragmentos cerámicos de gran tamaño. Las estructuras EMG1 y EMG2, correspondientes a una cubeta y una pileta de La Magdalena, guardan similitud en lo referido a la micro-estratigrafía y a la granulometría. Se ha determinado que su función, así como su fabricación, debieron estar vinculadas a un mismo contexto cronocultural. Química y mineralógicamente, las muestras presentan características iguales, con presencia de un conglomerante de cal con áridos y aditivos cerámicos de diferentes cochuras. Destaca la muestra de Las Arenas, con un tamaño de los fragmentos cerámicos muy superior al resto, seguido de la estructura EMG3 de La Magdalena. Las muestras restantes de éste enclave, junto con las muestras recogidas en Val de la Viña y Rotonda de Mejorada presentan condiciones similares. En conclusión, los datos revelan que existían diferentes fábricas destinadas a distintas finalidades, y que las estructuras industriales empleaban aditivos cerámicos para la manipulación de productos con líquidos, de distintas densidades pero que requerían de cierto grado de hidraulicidad. ABSTRACT Lime Roman mortars from the Iberian Peninsula has been analyzed in this reesearch. A group of samples were selected from some sites and all the samples come from industrial structures. All this samples show ceramic additives. From the start, the effort was centered in the pieces of pottery that were found in the mortars. The samples were treated and processed to develop a first phase of the research using macroscopy. With this technique, great results were achieved in the characterization of mortars, the microstratigraphy and the location of the ceramic pieces. While observing these pieces, it was seen that the fragments of pottery had a ring bordering the piece. The pieces with the bigger and more vivid rings were chosen and they were analyzed by a polarized light microscope. The mortars were characterized microscopically and it also showed that the rings were not a physical alteration or a visual defect. After some more tests, the rings were a chemical change associated with the hydraulicity of the mortar. The best samples were selected and mappings of their chemical elements were performed in order to know what could be happening in the interface between the ceramic matrix fragment and lime. With the results obtained it was found that there was a potential; both calcium accumulation within the ceramic grains and outside, just in the area of contact with the binder, forming spots longitudinally along the edge. These data were very useful for carrying out the next phase of study, which would meet promptly what was happening chemically in the area of contact. Another group of samples were taken, and this time focused on ceramic grains that met a statistical variables. Grains were chosen with two types of cooking as well as grains with different sizes and grains with ash additive in the matrix of lime, thinking that might be the most logical to be some sort of chemical change between the baked clay and lime array variables . Such variables were adapted to a multi-varial and geometric statistical system in order to synthesize the results and optimally display the data together, as mentioned several times in this work. After selecting the variables grains proceeded to perform a linear and spectral analysis SEM-EDX. This analysis led to determine that the chemical changes were graduals. These changes are summarized in an increase in the percentages of calcium inside the reaction rim of ceramics, from the edge to the outer ring. So percentage increasing is also observed at the interface of the ceramic matrix fragment with lime, confirming the results obtained by the mapping. Overall in all samples can be seen a shoulder in graphic calcium through the area of the ring reaction condition. The remaining percentages of magnesium, silicon and aluminum are usual. We have promptly confirmed that the increase of calcium is accentuated in samples where there is no ash and lime matrix. Cases for these grains suffer a greater increase than the rest. The second variable suffering more calcium is increased corresponding to good cooking grains with clay. Therefore, it appears that the variable size of the fragment is not critical. Therefore, considering the visual tests to the rings and their response to chemical results, we might think that increasing calcium inside the ceramic fragments was due to an injection of calcium inside clay in the run-up to the setting phase. It is at this point that would be the key to the chemical change that occurs at this interface, silica-calcium aluminate some authors have already investigated. This injection of calcium into the grain does not come alone, but generate a lime crust on the outside interface of ceramics, which we tested for mapping is real in our samples. The consequence of these results is the improvement of our understanding of historical hydraulic factor in building materials, such as mortar. For example, knowing that the incorporation of organic materials such as ash powder, may be detrimental to the injection of calcium inside the ceramic additives. Archaeologically speaking, it's very interesting to correlate different factories or structures located on a single site, or in the same regional area. Characterization studies and microstratigraphy not only provide new information to help restore mortars, but create the possibility of generating constructive patterns that serve as guide fossils to determinate the age of the structures. With regard to the results obtained in different archaeological sites it has seen a difference between mortars of pools or sinks with respect to industrial floors of undetermined use. The sample of the site of Las Arenas does not have any micro-stratigraphy, as if instead in the samples obtained in Rotonda de Mejorada, Val de la Viña and La Magdalena sites. In these settlements the structures are really similar, with different construction levels using lime mortars with aggregates and gravel in the inner layers, and ceramic aggregates as external additions. With regard to the grain size of the ceramic additions Val de la Viña and La Magdalena samples has several coincidences about the size of grains and distribution. Also, samples taken at La Magdalena, there is a difference between the MG1, MG2, MG3 and MG4 samples and the MG5 and MG6 samples, so the last corresponding to a mortar samples with larger ceramic fragments. The EMG1 and EMG2 structures, corresponding to a bucket and a pool of La Magdalena settlement, have similarities with regard to micro-stratigraphy and grain size. It has been determined that the function and manufacturing must be linked with a same chronocultural context.

Mechanical behaviour and formation process of silkworm silk gut

High performance silk fibers were produced directly from the silk glands of silkworms ("Bombyx mori") following an alternative route to natural spinning. This route is based on a traditional procedure that consists of soaking the silk glands in a vinegar solution and stretching them by hand leading to the so called silkworm guts. Here we present, to the authors’ best knowledge, the first comprehensive study on the formation, properties and microstructure of silkworm gut fibers. Comparison of the tensile properties and microstructural organization of the silkworm guts with those of naturally spun fibers allows gain of a deeper insight into the mechanisms that lead to the formation of the fiber, as well as the relationship between the microstructure and properties of these materials. In this regard, it is proved that an acidic environment and subsequent application of tensile stress in the range of 1000 kPa are sufficient conditions for the formation of a silk fiber.

Time-Lapse Video Microscopy of Gliding Motility in Toxoplasma gondii Reveals a Novel, Biphasic Mechanism of Cell LocomotionV⃞

Toxoplasma gondii is a member of the phylum Apicomplexa, a diverse group of intracellular parasites that share a unique form of gliding motility. Gliding is substrate dependent and occurs without apparent changes in cell shape and in the absence of traditional locomotory organelles. Here, we demonstrate that gliding is characterized by three distinct forms of motility: circular gliding, upright twirling, and helical rotation. Circular gliding commences while the crescent-shaped parasite lies on its right side, from where it moves in a counterclockwise manner at a rate of ∼1.5 μm/s. Twirling occurs when the parasite rights itself vertically, remaining attached to the substrate by its posterior end and spinning clockwise. Helical gliding is similar to twirling except that it occurs while the parasite is positioned horizontally, resulting in forward movement that follows the path of a corkscrew. The parasite begins lying on its left side (where the convex side is defined as dorsal) and initiates a clockwise revolution along the long axis of the crescent-shaped body. Time-lapse video analyses indicated that helical gliding is a biphasic process. During the first 180o of the turn, the parasite moves forward one body length at a rate of ∼1–3 μm/s. In the second phase, the parasite flips onto its left side, in the process undergoing little net forward motion. All three forms of motility were disrupted by inhibitors of actin filaments (cytochalasin D) and myosin ATPase (butanedione monoxime), indicating that they rely on an actinomyosin motor in the parasite. Gliding motility likely provides the force for active penetration of the host cell and may participate in dissemination within the host and thus is of both fundamental and practical interest.

Photochemically induced nuclear spin polarization in reaction centers of photosystem II observed by 13C-solid-state NMR reveals a strongly asymmetric electronic structure of the P680.+ primary donor chlorophyll

We report 13C magic angle spinning NMR observation of photochemically induced dynamic nuclear spin polarization (photo- CIDNP) in the reaction center (RC) of photosystem II (PS2). The light-enhanced NMR signals of the natural abundance 13C provide information on the electronic structure of the primary electron donor P680 (chlorophyll a molecules absorbing around 680 nm) and on the pz spin density pattern in its oxidized form, P680⨥. Most centerband signals can be attributed to a single chlorophyll a (Chl a) cofactor that has little interaction with other pigments. The chemical shift anisotropy of the most intense signals is characteristic for aromatic carbon atoms. The data reveal a pronounced asymmetry of the electronic spin density distribution within the P680⨥. PS2 shows only a single broad and intense emissive signal, which is assigned to both the C-10 and C-15 methine carbon atoms. The spin density appears shifted toward ring III. This shift is remarkable, because, for monomeric Chl a radical cations in solution, the region of highest spin density is around ring II. It leads to a first hypothesis as to how the planet can provide itself with the chemical potential to split water and generate an oxygen atmosphere using the Chl a macroaromatic cycle. A local electrostatic field close to ring III can polarize the electronic charge and associated spin density and increase the redox potential of P680 by stabilizing the highest occupied molecular orbital, without a major change of color. This field could be produced, e.g., by protonation of the keto group of ring V. Finally, the radical cation electronic structure in PS2 is different from that in the bacterial RC, which shows at least four emissive centerbands, indicating a symmetric spin density distribution over the entire bacteriochlorophyll macrocycle.

Symmetries in bacterial motility

Descriptions are given of three kinds of symmetries encountered in studies of bacterial locomotion, and of the ways in which they are circumvented or broken. A bacterium swims at very low Reynolds number: it cannot propel itself using reciprocal motion (by moving through a sequence of shapes, first forward and then in reverse); cyclic motion is required. A common solution is rotation of a helical filament, either right- or left-handed. The flagellar rotary motor that drives each filament generates the same torque whether spinning clockwise or counterclockwise. This symmetry is broken by coupling to the filament. Finally, bacterial populations, grown in a nutrient medium from an inoculum placed at a single point, usually move outward in symmetric circular rings. Under certain conditions, the cells excrete a chemoattractant, and the rings break up into discrete aggregates that can display remarkable geometric order.

Estudo do comportamento dinâmico e do fenômeno de deslocamento em lavadoras de roupas de eixo vertical

Este trabalho apresenta e compara alguns meios para o estudo do comportamento dinâmico de uma lavadora de roupas de eixo vertical durante o processo de extração de água das roupas, também conhecido como centrifugação. Os três métodos utilizados para estudar o comportamento dinâmico de uma lavadora de roupas de eixo vertical foram: analítico, experimental e simulação através de multicorpos. O interesse nesta etapa é devido ao fato dos problemas de vibração de uma lavadora ocorrerem principalmente durante a centrifugação. A modelagem de uma lavadora de roupas durante a etapa de centrifugação permite a obtenção de seu comportamento dinâmico bem como de suas principais características. Um outro tópico estudado neste trabalho foi o fenômeno de deslocamento da lavadora, um dos principais motivos de reclamação dos usuários de lavadoras de roupa automáticas.

Avaliação do processamento por atrito linear em chapas da liga de titânio Ti-6Al-4V.

Esta tese tem por objetivo a aplicação do processamento por atrito linear na liga de titânio Ti-6Al-4V. Derivado da solda por atrito linear, é um processo recente desenvolvido na década de 90 para união de alumínio. Sua aplicação em outros tipos de materiais como aços e ligas de alto desempenho, em especial o titânio, tem interessado a industria. A metodologia utilizada nesta tese para avaliar o processamento por atrito linear, consistiu na execução de ensaios mecânicos de tração em condições mistas em chapas da liga de titânio Ti-6Al-4V. A máquina utilizada para o processamento das chapas foi um centro de usinagem CNC convencional, adaptado com dispositivos especiais. Além dos ensaios de tração em condições mistas, foram executadas medições de microdurezas nas regiões atingidas pelo processo, avaliação das microestruturas resultantes e medições de tensão residual para uma caracterização mais ampla do processo. As microestruturas na região processada são caracterizadas por uma estrutura totalmente transformada. As temperaturas de pico na região processada excederam a temperatura -transus durante o processamento e a transformação da fase + ocorreu durante a fase de resfriamento. A transformação da fase para resultou na formação de agulhas de fase nos contornos e pelo interior dos grãos da fase . Pequenas regiões com estrutura equiaxial de grãos ( globular) foram observados na zona de processamento. A abordagem dos resultados quantitativos foi feita de forma estatística, visando identificar os parâmetros de maior interação com os resultados observados. Foi identificado nesta tese que a rotação da ferramenta apresentou a maior influência nos resultados de tensão residual, microdureza e tensão de escoamento. Uma importante contribuição à modelagem da tensão de escoamento para materiais anisotrópicos é proposta, baseado em um critério de escoamento ortotrópico. Equações complementares baseadas nos testes mistos de tração e cisalhamento são propostas para modificar o modelo ortotrópico. O intuito deste modelo é indicar em que condições o material tem seu regime de escoamento atingido, podendo servir de base para simulações práticas de peças em condições similares.

A Be-type star with a black-hole companion

Stellar-mass black holes have all been discovered through X-ray emission, which arises from the accretion of gas from their binary companions (this gas is either stripped from low-mass stars or supplied as winds from massive ones). Binary evolution models also predict the existence of black holes accreting from the equatorial envelope of rapidly spinning Be-type stars1, 2, 3 (stars of the Be type are hot blue irregular variables showing characteristic spectral emission lines of hydrogen). Of the approximately 80 Be X-ray binaries known in the Galaxy, however, only pulsating neutron stars have been found as companions2, 3, 4. A black hole was formally allowed as a solution for the companion to the Be star MWC 656 (ref. 5; also known as HD 215227), although that conclusion was based on a single radial velocity curve of the Be star, a mistaken spectral classification6 and rough estimates of the inclination angle. Here we report observations of an accretion disk line mirroring the orbit of MWC 656. This, together with an improved radial velocity curve of the Be star through fitting sharp Fe ii profiles from the equatorial disk, and a refined Be classification (to that of a B1.5–B2 III star), indicates that a black hole of 3.8 to 6.9 solar masses orbits MWC 656, the candidate counterpart of the γ-ray source AGL J2241+4454 (refs 5, 6). The black hole is X-ray quiescent and fed by a radiatively inefficient accretion flow giving a luminosity less than 1.6 × 10−7 times the Eddington luminosity. This implies that Be binaries with black-hole companions are difficult to detect in conventional X-ray surveys.

X-Ray Imaging of SAPO-34 Molecular Sieves at the Nanoscale: Influence of Steaming on the Methanol-to-Hydrocarbons Reaction

The effect of a severe steaming treatment on the physicochemical properties and catalytic performance of H-SAPO-34 molecular sieves during the methanol-to-hydrocarbons (MTH) reaction has been investigated with a combination of scanning transmission X-ray microscopy (STXM), catalytic testing, and bulk characterization techniques, including ammonia temperature programmed desorption and 27Al and 29Si magic angle spinning nuclear magnetic resonance. For this purpose, two samples, namely a calcined and a steamed H-SAPO-34 catalyst powder, have been compared. It has been found that calcined H-SAPO-34 displays a high selectivity towards light olefins, yet shows a poor stability as compared to a zeolite H-ZSM-5 catalyst. Moreover, in situ STXM at the carbon K-edge during the MTH reaction allows construction of nanoscale chemical maps of the hydrocarbon species formed within the H-SAPO-34 aggregates as a function of reaction time and steam post-treatment. It was found that there is an initial preferential formation of coke precursor species within the core of the H-SAPO-34 aggregates. For longer times on stream the formation of the coke precursor species is extended to the outer regions, progressively filling the entire H-SAPO-34 catalyst particle. In contrast, the hydrothermally treated H-SAPO-34 showed similar reaction selectivity, but decreased activity and catalyst stability with respect to its calcined counterpart. These variations in MTH performance are related to a faster and more homogeneous formation of coke precursor species filling up the entire steamed H-SAPO-34 catalyst particle. Finally, the chemical imaging capabilities of the STXM method at the Al and Si K-edge are illustrated by visualizing the silicon islands at the nanoscale before and after steaming H-SAPO-34.

Constraining the GRB-Magnetar Model by Means of the Galactic Pulsar Population

A large fraction of Gamma-ray bursts (GRBs) displays an X-ray plateau phase within <105 s from the prompt emission, proposed to be powered by the spin-down energy of a rapidly spinning newly born magnetar. In this work we use the properties of the Galactic neutron star population to constrain the GRB-magnetar scenario. We re-analyze the X-ray plateaus of all Swift GRBs with known redshift, between 2005 January and 2014 August. From the derived initial magnetic field distribution for the possible magnetars left behind by the GRBs, we study the evolution and properties of a simulated GRB-magnetar population using numerical simulations of magnetic field evolution, coupled with Monte Carlo simulations of Pulsar Population Synthesis in our Galaxy. We find that if the GRB X-ray plateaus are powered by the rotational energy of a newly formed magnetar, the current observational properties of the Galactic magnetar population are not compatible with being formed within the GRB scenario (regardless of the GRB type or rate at z = 0). Direct consequences would be that we should allow the existence of magnetars and "super-magnetars" having different progenitors, and that Type Ib/c SNe related to Long GRBs form systematically neutron stars with higher initial magnetic fields. We put an upper limit of ≤16 "super-magnetars" formed by a GRB in our Galaxy in the past Myr (at 99% c.l.). This limit is somewhat smaller than what is roughly expected from Long GRB rates, although the very large uncertainties do not allow us to draw strong conclusion in this respect.

Potential Shifts in Canadian High Arctic Sedimentary Organic Matter Composition With Permafrost Active Layer Detachments

Increased temperature and precipitation in Arctic regions have led to deeper thawing and structural instability in permafrost soil. The resulting localized disturbances, referred to as active layer detachments (ALDs), may transport organic matter (OM) to more biogeochemically active zones. To examine this further, solid state cross polarization magic angle spinning 13C nuclear magnetic resonance (CPMAS NMR) and biomarker analysis were used to evaluate potential shifts in riverine sediment OM composition due to nearby ALDs within the Cape Bounty Arctic Watershed Observatory, Nunavut, Canada. In sedimentary OM near ALDs, NMR analysis revealed signals indicative of unaltered plant-derived material, likely derived from permafrost. Long chain acyclic aliphatic lipids, steroids, cutin, suberin and lignin occurred in the sediments, consistent with a dominance of plant-derived compounds, some of which may have originated from permafrost-derived OM released by ALDs. OM degradation proxies for sediments near ALDs revealed less alteration in acyclic aliphatic lipids, while constituents such as steroids, cutin, suberin and lignin were found at a relatively advanced stage of degradation. Phospholipid fatty acid analysis indicated that microbial activity was higher near ALDs than downstream but microbial substrate limitation was prevalent within disturbed regions. Our study suggests that, as these systems recover from disturbance, ALDs likely provide permafrost-derived OM to sedimentary environments. This source of OM, which is enriched in labile OM, may alter biogeochemical patterns and enhance microbial respiration within these ecosystems.