Eco-retrofitting - from managerialism to design

As all environmental problems are caused by human systems of design, sustainability can be seen as a design problem. Given the massive energy and material flows through the built environment, sustainability simply cannot be achieved without the re-design of our urban areas. ‘Eco-retrofitting’, as used here, means modifying buildings and/or urban areas to create net positive social and environmental impacts – both on site and off site. While this has probably not been achieved anywhere as yet, myriad but untapped eco-solutions are already available which could be up-scaled to the urban level. It is now well established that eco-retrofitting buildings and cities with appropriate design technology can pay for itself through lower health costs, productivity increases and resource savings. Good design would also mean happier human and ecological communities at a much lower cost over time. In fact, good design could increase life quality and the life support services of nature while creating sustainable‘economic’growth. The impediments are largely institutional and intellectual, which can be encapsulated in the term ‘managerial’. There are, however, also systems design solutions to the managerial obstacles that seem to be stalling the transition to sustainable systems designs. Given the sustainability imperative, then, why is the adoption of better management systems so slow? The oral presentation will show examples of ways in which built environment design can create environments that not only reduce the ongoing damage of past design, but could theoretically generate net positive social and ecological outcomes over their life cycle. These illustrations show that eco-retrofitting could cost society less than doing nothing - especially given the ongoing renovations of buildings - but for managerial hurdles. The paper outlines on how traditional managerial approaches stand in the way of ‘design for ecosystem services’, and list some management solutions that have long been identified, but are not yet widely adopted. Given the pervasive nature of these impediments and their alternatives, they are presented by way of examples. A sampling of eco-retrofitting solutions are also listed to show that ecoretrofitting is a win-win-win solution that stands ready to be implemented by people having management skills and/or positions of influence.

Mapping personal trip OD from probe data

The paper analyses the expected value of OD volumes from probe with fixed error, error that is proportional to zone size and inversely proportional to zone size. To add realism to the analysis, real trip ODs in the Tokyo Metropolitan Region are synthesised. The results show that for small zone coding with average radius of 1.1km, and fixed measurement error of 100m, an accuracy of 70% can be expected. The equivalent accuracy for medium zone coding with average radius of 5km would translate into a fixed error of approximately 300m. As expected small zone coding is more sensitive than medium zone coding as the chances of the probe error envelope falling into adjacent zones are higher. For the same error radii, error proportional to zone size would deliver higher level of accuracy. As over half (54.8%) of the trip ends start or end at zone with equivalent radius of ≤ 1.2 km and only 13% of trips ends occurred at zones with equivalent radius ≥2.5km, measurement error that is proportional to zone size such as mobile phone would deliver higher level of accuracy. The synthesis of real OD with different probe error characteristics have shown that expected value of >85% is difficult to achieve for small zone coding with average radius of 1.1km. For most transport applications, OD matrix at medium zone coding is sufficient for transport management. From this study it can be drawn that GPS with error range between 2 and 5m, and at medium zone coding (average radius of 5km) would provide OD estimates greater than 90% of the expected value. However, for a typical mobile phone operating error range at medium zone coding the expected value would be lower than 85%. This paper assumes transmission of one origin and one destination positions from the probe. However, if multiple positions within the origin and destination zones are transmitted, map matching to transport network could be performed and it would greatly improve the accuracy of the probe data.

Analysing preservice teachers' potential for implementing engineering education in the middle school

Engineering is pivotal to any country's development. Yet there are insufficient engineers to take up available positions in many countries, including Australia (Engineers Australia, 2008). Engineering education is limited in Australia at the primary, middle and high school levels. One of the starting points for addressing this shortfall lies in preservice teacher education. This study explores second-year preservice teachers' potential to teach engineering in middle school, following their engagement with engineering concepts in their science curriculum unit and their teaching of engineering activities to Year 7 students. Using a literature-based pretest-posttest survey, items were categorised into four constructs (ie. personal professional attributes, student motivation, pedagogical knowledge and fused curricula). Results indicated that the preservice teachers' responses had not changed for instilling positive attitudes (88%) and accepting advice from colleagues (94%). However, there was statistical significance with 9 of the 25 survey items (p<0.05) after the preservice teachers' involvement in engineering activities. Fusing engineering education with other subjects, such as mathematics and science, is an essential first step in promoting preservice teachers' potential to implement engineering education in the middle school.

Robot navigation in sensor space

This thesis investigates the problem of robot navigation using only landmark bearings. The proposed system allows a robot to move to a ground target location specified by the sensor values observed at this ground target posi- tion. The control actions are computed based on the difference between the current landmark bearings and the target landmark bearings. No Cartesian coordinates with respect to the ground are computed by the control system. The robot navigates using solely information from the bearing sensor space. Most existing robot navigation systems require a ground frame (2D Cartesian coordinate system) in order to navigate from a ground point A to a ground point B. The commonly used sensors such as laser range scanner, sonar, infrared, and vision do not directly provide the 2D ground coordi- nates of the robot. The existing systems use the sensor measurements to localise the robot with respect to a map, a set of 2D coordinates of the objects of interest. It is more natural to navigate between the points in the sensor space corresponding to A and B without requiring the Cartesian map and the localisation process. Research on animals has revealed how insects are able to exploit very limited computational and memory resources to successfully navigate to a desired destination without computing Cartesian positions. For example, a honeybee balances the left and right optical flows to navigate in a nar- row corridor. Unlike many other ants, Cataglyphis bicolor does not secrete pheromone trails in order to find its way home but instead uses the sun as a compass to keep track of its home direction vector. The home vector can be inaccurate, so the ant also uses landmark recognition. More precisely, it takes snapshots and compass headings of some landmarks. To return home, the ant tries to line up the landmarks exactly as they were before it started wandering. This thesis introduces a navigation method based on reflex actions in sensor space. The sensor vector is made of the bearings of some landmarks, and the reflex action is a gradient descent with respect to the distance in sensor space between the current sensor vector and the target sensor vec- tor. Our theoretical analysis shows that except for some fully characterized pathological cases, any point is reachable from any other point by reflex action in the bearing sensor space provided the environment contains three landmarks and is free of obstacles. The trajectories of a robot using reflex navigation, like other image- based visual control strategies, do not correspond necessarily to the shortest paths on the ground, because the sensor error is minimized, not the moving distance on the ground. However, we show that the use of a sequence of waypoints in sensor space can address this problem. In order to identify relevant waypoints, we train a Self Organising Map (SOM) from a set of observations uniformly distributed with respect to the ground. This SOM provides a sense of location to the robot, and allows a form of path planning in sensor space. The navigation proposed system is analysed theoretically, and evaluated both in simulation and with experiments on a real robot.

Aberrations and pupil location under corneal topography and Hartmann-Shack illumination conditions

PURPOSE. This study was conducted to determine the magnitude of pupil center shift between the illumination conditions provided by corneal topography measurement (photopic illuminance) and by Hartmann-Shack aberrometry (mesopic illuminance) and to investigate the importance of this shift when calculating corneal aberrations and for the success of wavefront-guided surgical procedures. METHODS. Sixty-two subjects with emmetropia underwent corneal topography and Hartmann-Shack aberrometry. Corneal limbus and pupil edges were detected, and the differences between their respective centers were determined for both procedures. Corneal aberrations were calculated using the pupil centers for corneal topography and for Hartmann-Shack aberrometry. Bland-Altmann plots and paired t-tests were used to analyze the differences between corneal aberrations referenced to the two pupil centers. RESULTS. The mean magnitude (modulus) of the displacement of the pupil with the change of the illumination conditions was 0.21 ± 0.11 mm. The effect of this pupillary shift was manifest for coma corneal aberrations for 5-mm pupils, but the two sets of aberrations calculated with the two pupil positions were not significantly different. Sixty-eight percent of the population had differences in coma smaller than 0.05 µm, and only 4% had differences larger than 0.1 µm. Pupil displacement was not large enough to significantly affect other higher-order Zernike modes. CONCLUSIONS. Estimated corneal aberrations changed slightly between photopic and mesopic illumination conditions given by corneal topography and Hartmann-Shack aberrometry. However, this systematic pupil shift, according to the published tolerances ranges, is enough to deteriorate the optical quality below the theoretically predicted diffraction limit of wavefront-guided corneal surgery.

Influences of accommodation and myopia on the foveal Stiles-Crawford effect

We determined the foveal Stiles-Crawford effect (SCE) as a function of up to 8D accommodation stimulus in six young emmetropes and six young myopes using a psychophysical two-channel Maxwellian system in which the threshold luminance increment of a 1 mm spot entering through variable positions in the pupil was determined against a background formed by a 4 mm spot entering the pupil centrally. The SCE became steeper in both groups with increasing accommodation stimulus, but with no systematic shift of the peak. Combining the data of both groups gave significant increases in directionality of 15-20% in horizontal and vertical pupil meridians with 6D of accommodation. However, additional experiments indicated that much of this was an artefact of higher order aberrations and accommodative lag. Thus, there appears to be little changes in orientation or directionality in the SCE with accommodation stimulus levels up to 6 D, but it is possible that changes may occur at very high accommodation levels

Participation and social order in the playground

This study investigates the everyday practices of young children acting in their social worlds within the context of the school playground. It employs an ethnographic ethnomethodological approach using conversation analysis. In the context of child participation rights advanced by the United Nations Convention on the Rights of the Child (UNCRC) and childhood studies, the study considers children’s social worlds and their participation agendas. The participants of the study were a group of young children in a preparatory year setting in a Queensland school. These children, aged 4 to 6 years, were videorecorded as they participated in their day-to-day activities in the classroom and in the playground. Data collection took place over a period of three months, with a total of 26 hours of video data. Episodes of the video-recordings were shown to small groups of children and to the teacher to stimulate conversations about what they saw on the video. The conversations were audio-recorded. This method acknowledged the child’s standpoint and positioned children as active participants in accounting for their relationships with others. These accounts are discussed as interactionally built comments on past joint experiences and provided a starting place for analysis of the video-recorded interaction. Four data chapters are presented in this thesis. Each data chapter investigates a different topic of interaction. The topics include how children use “telling” as a tactical tool in the management of interactional trouble, how children use their “ideas” as possessables to gain ownership of a game and the interactional matters that follow, how children account for interactional matters and bid for ownership of “whose idea” for the game and finally, how a small group of girls orientated to a particular code of conduct when accounting for their actions in a pretend game of “school”. Four key themes emerged from the analysis. The first theme addresses two arenas of action operating in the social world of children, pretend and real: the “pretend”, as a player in a pretend game, and the “real”, as a classroom member. These two arenas are intertwined. Through inferences to explicit and implicit “codes of conduct”, moral obligations are invoked as children attempt to socially exclude one another, build alliances and enforce their own social positions. The second theme is the notion of shared history. This theme addresses the history that the children reconstructed, and acts as a thread that weaves through their interactions, with implications for present and future relationships. The third theme is around ownership. In a shared context, such as the playground, ownership is a highly contested issue. Children draw on resources such as rules, their ideas as possessables, and codes of behaviour as devices to construct particular social and moral orders around owners of the game. These themes have consequences for children’s participation in a social group. The fourth theme, methodological in nature, shows how the researcher was viewed as an outsider and novice and was used as a resource by the children. This theme is used to inform adult-child relationships. The study was situated within an interest in participation rights for children and perspectives of children as competent beings. Asking children to account for their participation in playground activities situates children as analysers of their own social worlds and offers adults further information for understanding how children themselves construct their social interactions. While reporting on the experiences of one group of children, this study opens up theoretical questions about children’s social orders and these influences on their everyday practices. This thesis uncovers how children both participate in, and shape, their everyday social worlds through talk and interaction. It investigates the consequences that taken-for-granted activities of “playing the game” have for their social participation in the wider culture of the classroom. Consideration of this significance may assist adults to better understand and appreciate the social worlds of young children in the school playground.

Conceptions of school based youth health nursing : a phenomenographic study

The School Based Youth Health Nurse Program was established in 1999 by the Queensland Government to fund school nurse positions in Queensland state high schools. Schools were required to apply for a School Based Youth Health Nurse during a five-phase recruitment process, managed by the health districts, and rolled out over four years. The only mandatory selection criterion for the position of School Based Youth Health Nurse was registration as a General Nurse and most School Based Youth Health Nurses are allocated to two state high schools. Currently, there are approximately 115 Full Time Equivalent School Based Youth Health Nurse positions across all Queensland state high schools. The literature review revealed an abundance of information about school nursing. Most of the literature came from the United Kingdom and the United States, who have a different model of school nursing to school based youth health nursing. However, there is literature to suggest school nursing is gradually moving from a disease-focused approach to a social view of health. The noticeable number of articles about, for example, drug and alcohol, mental health, and contemporary sexual health issues, is evidence of this change. Additionally, there is a significant the volume of literature about partnerships and collaboration, much of which is about health education, team teaching and how school nurses and schools do health business together. The surfacing of this literature is a good indication that school nursing is aligning with the broader national health priority areas. More particularly, the literature exposed a small but relevant and current body of research, predominantly from Queensland, about school based youth health nursing. However, there remain significant gaps in the knowledge about school based youth health nursing. In particular, there is a deficit about how School Based Youth Heath Nurses understand the experience of school based youth health nursing. This research aimed to reveal the meaning of the experience of school based youth health nursing. The research question was How do School Based Youth Health Nurses’ understand the experience of school based youth health nursing? This enquiry was instigated because the researcher, who had a positive experience of school based youth health nursing, considered it important to validate other School Based Youth Health Nurses’ experiences. Consequently, a comprehensive use of qualitative research was considered the most appropriate manner to explore this research question. Within this qualitative paradigm, the research framework consists of the epistemology of social constructionism, the theoretical perspective of interpretivism and the approach of phenomenography. After ethical approval was gained, purposeful and snowball sampling was used to recruit a sample of 16 participants. In-depth interviews, which were voluntary, confidential and anonymous, were mostly conducted in public venues and lasted from 40-75 minutes. The researcher also kept a researchers journal as another form of data collection. Data analysis was guided by Dahlgren and Fallsbergs’ (1991, p. 152) seven phases of data analysis which includes familiarization, condensation, comparison, grouping, articulating, labelling and contrasting. The most important finding in this research is the outcome space, which represents the entirety of the experience of school based youth health nursing. The outcome space consists of two components: inside the school environment and outside the school environment. Metaphorically and considered as whole-in-themselves, these two components are not discreet but intertwined with each other. The outcome space consists of eight categories. Each category of description is comprised of several sub-categories of description but as a whole, is a conception of school based youth health nursing. The eight conceptions of school based youth health nursing are: 1. The conception of school based youth health nursing as out there all by yourself. 2. The conception of school based youth health nursing as no real backup. 3. The conception of school based youth health nursing as confronted by many barriers. 4. The conception of school based youth health nursing as hectic and full-on. 5. The conception of school based youth health nursing as working together. 6. The conception of school based youth health nursing as belonging to school. 7. The conception of school based youth health nursing as treated the same as others. 8. The conception of school based youth health nursing as the reason it’s all worthwhile. These eight conceptions of school based youth health nursing are logically related and form a staged hierarchical relationship because they are not equally dependent on each other. The conceptions of school based youth health nursing are grouped according to negative, negative and positive and positive conceptions of school based youth health nursing. The conceptions of school based youth health nursing build on each other, from the bottom upwards, to reach the authorized, or the most desired, conception of school based youth health nursing. This research adds to the knowledge about school nursing in general but especially about school based youth health nursing specifically. Furthermore, this research has operational and strategic implications, highlighted in the negative conceptions of school based youth health nursing, for the School Based Youth Health Nurse Program. The researcher suggests the School Based Youth Health Nurse Program, as a priority, address the operational issues The researcher recommends a range of actions to tackle issues and problems associated with accommodation and information, consultations and referral pathways, confidentiality, health promotion and education, professional development, line management and School Based Youth Health Nurse Program support and school management and community. Strategically, the researcher proposes a variety of actions to address strategic issues, such as the School Based Youth Health Nurse Program vision, model and policy and practice framework, recruitment and retention rates and evaluation. Additionally, the researcher believes the findings of this research have the capacity to spawn a myriad of future research projects. The researcher has identified the most important areas for future research as confidentiality, information, qualifications and health outcomes.

Queering cyberspace : fan fiction communities as spaces for expressing and exploring sexuality

The social construction of sexuality over the past one hundred and fifty years has created a dichotomy between heterosexual and non-heterosexual identities that essentially positions the former as “normal” and the latter as deviant. Even Kinsey’s and others’ work on the continuum of sexualities did little to alter the predominantly heterosexist perception of the non-heterosexual as “other” (Kinsey, Pomeroy and Martin 2007; Esterberg 2006; Franceour and Noonan 2007). Some political action and academic work is beginning to challenge such perceptions. Even some avenues of social interaction, such as the recent proliferation of online communities, may also challenge such views, or at least contribute to their being rethought in some ways. This chapter explores a specific kind of online community devoted to fan fiction, specifically homoerotic – or what is known colloquially as “slash” – fan fiction. Fan fiction is fiction, published on the internet, and written by fans of well-known books and television shows, using the characters to create new and varied plots. “Slash” refers to the pairing of two of the male characters in a romantic relationship, and the term comes from the punctuation mark dividing the named pair as, for example, Spock/Kirk from the Star Trek television series. Although there are some slash fan-fiction stories devoted to female-female relationships – called “femmeslash” – the term “slash” generally refers to male-male relationships, and will be utilized throughout this chapter, given that the research discussed focuses on communities centered around one such male pairing.

Internetalisation : the Internet's influence on international market growth in the firm's outward internationalisation process

It has been suggested that the Internet is the most significant driver of international trade in recent years to the extent that the term =internetalisation‘ has been coined (Bell, Deans, Ibbotson & Sinkovics, 2001; Buttriss & Wilkinson, 2003). This term is used to describe the Internet‘s affect on the internationalisation process of the firm. Consequently, researchers have argued that the internationalisation process of the firm has altered due to the Internet, hence is in need of further investigation. However, as there is limited research and understanding, ambiguity remains in how the Internet has influenced international market growth. Thus, the purpose of this study was to explore how the Internet influences firms‘ internationalisation process, specifically, international market growth. To this end, Internet marketing and international market growth theories are used to illuminate this ambiguity in the body of knowledge. Thus, the research problem =How and why does the Internet influence international market growth of the firm’ is justified for investigation. To explore the research question a two-stage approach is used. Firstly, twelve case studies were used to evaluate key concepts, generate hypotheses and to develop a model of Internetalisation for testing. The participants held key positions within their firm, so that rich data could be drawn from international market growth decision makers. Secondly, a quantitative confirmation process analysed the identified themes or constructs, using two hundred and twenty four valid responses. Constructs were evaluated through an exploratory factor analysis, confirmatory factor analysis and structural equation modelling process. Structural equation modelling was used to test the model of =internetalisation‘ to examine the interrelationships between the internationalisation process components: information availability, information usage, interaction communication, international mindset, business relationship usage, psychic distance, the Internet intensity of the firm and international market growth. This study found that the Internet intensity of the firm mediates information availability, information usage, international mindset, and business relationships when firms grow in international markets. Therefore, these results provide empirical evidence that the Internet has a positive influence on international information, knowledge, entrepreneurship and networks and these in turn influence international market growth. The theoretical contributions are three fold. Firstly, the study identifies a holistic model of the impact the Internet has had on the outward internationalisation of the firm. This contribution extends the body of knowledge pertaining to Internet international marketing by mapping and confirming interrelationships between the Internet, internationalisation and growth concepts. Secondly, the study highlights the broad scope and accelerated rate of international market growth of firms. Evidence that the Internet influences the traditional and virtual networks for the pursuit of international market growth extends the current understanding. Thirdly, this study confirms that international information, knowledge, entrepreneurship and network concepts are valid in a single model. Thus, these three contributions identify constructs, measure constructs in a multi-item capacity, map interrelationships and confirm single holistic model of ‗internetalisation‘. The main practical contribution is that the findings identified information, knowledge and entrepreneurial opportunities for firms wishing to maximise international market growth. To capitalise on these opportunities suggestions are offered to assist firms to develop greater Internet intensity and internationalisation capabilities. From a policy perspective, educational institutions and government bodies need to promote more applied programs for Internet international marketing. The study provides future researchers with a platform of identified constructs and interrelationships related to internetalisation, with which to investigate. However, a single study has limitations of generalisability; thus, future research should replicate this study. Such replication or cross validation will assist in the verification of scales used in this research and enhance the validity of causal predications. Furthermore, this study was undertaken in the Australian outward-bound context. Research in other nations, as well as research into inbound internationalisation would be fruitful.

Soundcipher : a music and sound library for processing

SoundCipher is a software library written in the Java language that adds important music and sound features to the Processing environment that is widely used by media artists and otherwise has an orientation toward computational graphics. This article introduces the SoundCipher library and its features, describes its influences and design intentions, and positions it within the field of computer music programming tools. SoundCipher enables the rich history of algorithmic music techniques to be accessible within one of today’s most popular media art platforms. It also provides an accessible means for learning to create algorithmic music and sound programs.

Flowers powers : Mars or Venus?

Hartley proposes that what we need is a 'respect for a "law" of interdependent toleration of positions with which we don't agree, which are held by people we don't like. The usual name for this remarkable achievement is -"TV comedy." '

Theoretical investigation of thermal tweezers for parallel manipulation of atoms and nanoparticles on surfaces

A major focus of research in nanotechnology is the development of novel, high throughput techniques for fabrication of arbitrarily shaped surface nanostructures of sub 100 nm to atomic scale. A related pursuit is the development of simple and efficient means for parallel manipulation and redistribution of adsorbed atoms, molecules and nanoparticles on surfaces – adparticle manipulation. These techniques will be used for the manufacture of nanoscale surface supported functional devices in nanotechnologies such as quantum computing, molecular electronics and lab-on-achip, as well as for modifying surfaces to obtain novel optical, electronic, chemical, or mechanical properties. A favourable approach to formation of surface nanostructures is self-assembly. In self-assembly, nanostructures are grown by aggregation of individual adparticles that diffuse by thermally activated processes on the surface. The passive nature of this process means it is generally not suited to formation of arbitrarily shaped structures. The self-assembly of nanostructures at arbitrary positions has been demonstrated, though these have typically required a pre-patterning treatment of the surface using sophisticated techniques such as electron beam lithography. On the other hand, a parallel adparticle manipulation technique would be suited for directing the selfassembly process to occur at arbitrary positions, without the need for pre-patterning the surface. There is at present a lack of techniques for parallel manipulation and redistribution of adparticles to arbitrary positions on the surface. This is an issue that needs to be addressed since these techniques can play an important role in nanotechnology. In this thesis, we propose such a technique – thermal tweezers. In thermal tweezers, adparticles are redistributed by localised heating of the surface. This locally enhances surface diffusion of adparticles so that they rapidly diffuse away from the heated regions. Using this technique, the redistribution of adparticles to form a desired pattern is achieved by heating the surface at specific regions. In this project, we have focussed on the holographic implementation of this approach, where the surface is heated by holographic patterns of interfering pulsed laser beams. This implementation is suitable for the formation of arbitrarily shaped structures; the only condition is that the shape can be produced by holographic means. In the simplest case, the laser pulses are linearly polarised and intersect to form an interference pattern that is a modulation of intensity along a single direction. Strong optical absorption at the intensity maxima of the interference pattern results in approximately a sinusoidal variation of the surface temperature along one direction. The main aim of this research project is to investigate the feasibility of the holographic implementation of thermal tweezers as an adparticle manipulation technique. Firstly, we investigate theoretically the surface diffusion of adparticles in the presence of sinusoidal modulation of the surface temperature. Very strong redistribution of adparticles is predicted when there is strong interaction between the adparticle and the surface, and the amplitude of the temperature modulation is ~100 K. We have proposed a thin metallic film deposited on a glass substrate heated by interfering laser beams (optical wavelengths) as a means of generating very large amplitude of surface temperature modulation. Indeed, we predict theoretically by numerical solution of the thermal conduction equation that amplitude of the temperature modulation on the metallic film can be much greater than 100 K when heated by nanosecond pulses with an energy ~1 mJ. The formation of surface nanostructures of less than 100 nm in width is predicted at optical wavelengths in this implementation of thermal tweezers. Furthermore, we propose a simple extension to this technique where spatial phase shift of the temperature modulation effectively doubles or triples the resolution. At the same time, increased resolution is predicted by reducing the wavelength of the laser pulses. In addition, we present two distinctly different, computationally efficient numerical approaches for theoretical investigation of surface diffusion of interacting adparticles – the Monte Carlo Interaction Method (MCIM) and the random potential well method (RPWM). Using each of these approaches we have investigated thermal tweezers for redistribution of both strongly and weakly interacting adparticles. We have predicted that strong interactions between adparticles can increase the effectiveness of thermal tweezers, by demonstrating practically complete adparticle redistribution into the low temperature regions of the surface. This is promising from the point of view of thermal tweezers applied to directed self-assembly of nanostructures. Finally, we present a new and more efficient numerical approach to theoretical investigation of thermal tweezers of non-interacting adparticles. In this approach, the local diffusion coefficient is determined from solution of the Fokker-Planck equation. The diffusion equation is then solved numerically using the finite volume method (FVM) to directly obtain the probability density of adparticle position. We compare predictions of this approach to those of the Ermak algorithm solution of the Langevin equation, and relatively good agreement is shown at intermediate and high friction. In the low friction regime, we predict and investigate the phenomenon of ‘optimal’ friction and describe its occurrence due to very long jumps of adparticles as they diffuse from the hot regions of the surface. Future research directions, both theoretical and experimental are also discussed.

Developing authentic achievement for disengaged young people using an electronic portfolio system

Credentials are a salient form of cultural capital and if a student’s learning and productions are not assessed, they are invisible in current social systems of education and employment. In this field, invisible equals non-existent. This paper arises from the context of an alternative education institution where conventional educational assessment techniques currently fail to recognise the creativity and skills of a cohort of marginalised young people. In order to facilitate a new assessment model an electronic portfolio system (EPS) is being developed and trialled to capture evidence of students’ learning and their productions. In so doing a dynamic system of arranging, exhibiting, exploiting and disseminating assessment data in the form of coherent, meaningful and valuable reports will be maintained. The paper investigates the notion of assessing development of creative thinking and skills through the means of a computerised system that operates in an area described as the efield. A model of the efield is delineated and is explained as a zone existing within the internet where free users exploit the cloud and cultivate social and cultural capital. Drawing largely on sociocultural theory and Bourdieu’s concepts of field, habitus and capitals, the article positions the efield as a potentially productive instrument in assessment for learning practices. An important aspect of the dynamics of this instrument is the recognition of teachers as learners. This is seen as an integral factor in the sociocultural approach to assessment for learning practices that will be deployed with the EPS. What actually takes place is argued to be assessment for learning as a field of exchange. The model produced in this research is aimed at delivering visibility and recognition through an engaging instrument that will enhance the prospects of marginalised young people and shift the paradigm for assessment in a creative world.

Optimal monitoring in family-owned companies? Evidence from Asia

Manuscript Type: Empirical Research Issue: We propose that high levels of monitoring are not always in the best interests of minority shareholders. In family-owned companies the optimal level of board monitoring required by minority shareholders is expected to be lower than that of other companies. This is because the relative benefits and costs of monitoring are different in family-owned companies. Research Findings: At moderate levels of board monitoring, we find concave relationships between board monitoring variables and firm performance for family-owned companies but not for other companies. The optimal level of board monitoring for our sample of Asian family-owned companies equates to board independence of 38%, separation of the Chairman and CEO positions and establishment of audit and remuneration committees. Additional testing shows that the optimal level of board monitoring is sensitive to the magnitude of the agency conflict between the family group and minority shareholders and the presence of substitute monitoring. Practitioner/Policy Implications: For policymakers, the results show that more monitoring is not always in the best interests of minority shareholders. Therefore, it may be inappropriate for regulators to advise all companies to follow the same set of corporate governance guidelines. However, our results also indicate that the board governance practices of family-owned companies are still well below the identified optimal levels. Keywords: Corporate Governance, Board Independence, Board of Directors, Family Firms, Monitoring.