Field-based models for low speed switched reluctance machine designs

Trabalho apresentado na Conferência CPE-POWERENG 2016, 29 junho a 01 de julho 2016, Bydgoszcz, Polónia

Towards Accurate and Efficient Description of Excited States

Thesis (Ph.D.)--University of Washington, 2016-06

Equity weights in the allocation of health care: the rank-dependent QALY model

This paper introduces the rank-dependent quality-adjusted life-years (QALY) model, a new method to aggregate QALYs in economic evaluations of health care. The rank-dependent QALY model permits the formalization of influential concepts of equity in the allocation of health care, such as the fair innings approach, and it includes as special cases many of the social welfare functions that have been proposed in the literature. An important advantage of the rank-dependent QALY model is that it offers a straightforward procedure to estimate equity weights for QALYs. We characterize the rank-dependent QALY model and argue that its central condition has normative appeal. (C) 2003 Elsevier B.V. All rights reserved.

Consequences of incorrect sampling procedures in resonance-based radar target identification

Radar target identification based on complex natural resonances is sometimes achieved by convolving a linear time-domain filter with a received target signature. The filter is constructed from measured or pre-calculated target resonances. The performance of the target identification procedure is degraded if the difference between the sampling rates of the target signature and the filter is ignored. The problem is investigated for the natural extinction pulse technique (E-pulse) for the case of identifying stick models of aircraft.

Validation of assembled nucleic acid-based tests in diagnostic microbiology laboratories

Medical microbiology and virology laboratories use nucleic acid tests (NAT) to detect genomic material of infectious organisms in clinical samples. Laboratories choose to perform assembled (or in-house) NAT if commercial assays are not available or if assembled NAT are more economical or accurate. One reason commercial assays are more expensive is because extensive validation is necessary before the kit is marketed, as manufacturers must accept liability for the performance of their assays, assuming their instructions are followed. On the other hand, it is a particular laboratory's responsibility to validate an assembled NAT prior to using it for testing and reporting results on human samples. There are few published guidelines for the validation of assembled NAT. One procedure that laboratories can use to establish a validation process for an assay is detailed in this document. Before validating a method, laboratories must optimise it and then document the protocol. All instruments must be calibrated and maintained throughout the testing process. The validation process involves a series of steps including: (i) testing of dilution series of positive samples to determine the limits of detection of the assay and their linearity over concentrations to be measured in quantitative NAT; (ii) establishing the day-to-day variation of the assay's performance; (iii) evaluating the sensitivity and specificity of the assay as far as practicable, along with the extent of cross-reactivity with other genomic material; and (iv) assuring the quality of assembled assays using quality control procedures that monitor the performance of reagent batches before introducing new lots of reagent for testing.

Community-based programmes to prevent pedestrian injuries in children 0-14 years: A systematic review

Community-based models for injury prevention have become an accepted part of the overall injury control strategy. This systematic review of the scientific literature examines the evidence for their effectiveness in reducing pedestrian injury in children 0-14 years of age. A comprehensive search of the literature was performed using the following study selection criteria: community-based intervention study; target population was children under 14 years; outcome measure is either pedestrian injury rates or observed child pedestrian or vehicle driver behaviour; and use of a community control or an historical control in the study design. Quality assessment and data abstraction was guided by a standardized procedure and performed independently by two authors. Data synthesis was in tabular and text form with meta-analysis not being possible due to the discrepancy in methods and measures between the studies.

mecA locus diversity in methicillin-resistant Staphylococcus aureus isolates in Brisbane, Australia, and the development of a novel diagnostic procedure for the Western Samoan phage pattern clone

An emerging public health phenomenon is the increasing incidence of methicillin-resistant Staphylococcus aureus (MRSA) infections that are acquired outside of health care facilities. One lineage of community-acquired MRSA (CA-MRSA) is known as the Western Samoan phage pattern (WSPP) clone. The central aim of this study was to develop an efficient genotyping procedure for the identification of WSPP isolates. The approach taken was to make use of the highly variable region downstream of mecA in combination with a single nucleotide polymorphism (SNP) defined by the S. aureus multilocus sequence typing (MLST) database. The premise was that a combinatorial genotyping method that interrogated both a highly variable region and the genomic backbone would deliver a high degree of informative power relative to the number of genetic polymorphisms-interrogated. Thirty-five MRSA isolates were used for this study, and their gene contents and order downstream of mecA were determined. The CA-MRSA isolates were found to contain a truncated mecA downstream region consisting of mecA-HVR-IS431 mec-dcs-Ins117, and a PCR-based method for identifying this structure was developed. The hospital-acquired isolates were found to contain eight different mecA downstream regions, three of which were novel. The Minimum SNPs computer software program was used to mine the S. aureus MLST database, and the arcC 2726 polymorph was identified as 82% discriminatory for ST-30. A real-time PCR assay was developed to interrogate this SNP. We found that the assay for the truncated mecA downstream region in combination with the interrogation of arcC position 272 provided an unambiguous identification of WSPP isolates.

Community-based programmes to prevent falls in children: A systematic review

Objective: We systematically reviewed the literature to examine the evidence for the effectiveness of community-based interventions to reduce fall-related injury in children aged 0-16 years. Methods: We performed a comprehensive search of the literature using the following study selection criteria: community-based intervention study; target population was children aged 0-16 years; outcome measure was fall-related injury rates; and either a community control or historical control was used in the study design. Quality assessment and data abstraction were guided by a standardized procedure and performed independently by two authors. Results: Only six studies fitting the inclusion criteria were identified in our search and only two of these used a trial design with a contemporary community control. Neither of the high quality evaluation studies showed an effect from the intervention and while authors of the remaining studies reported effective falls prevention programmes, the pre- and post-intervention design, uncontrolled for background secular trends, makes causal inferences from these studies difficult. Conclusion: There is a paucity of research studies from which evidence regarding the effectiveness of community-based intervention programmes for the prevention of fall-related injury in children could be based.

Community-based programs to promote care seat restraints in children 0-16 years - A systematic review

Study Objective: Community-based models for injury prevention have become an accepted part of the overall injury control strategy. This systematic review of the scientific literature examines the evidence for their effectiveness in reducing injury due to inadequate car seat restraint use in children 0-16 years of age. Methods: A comprehensive search of the literature was performed using the following study selection criteria: community-based intervention study: target population was children aged 0-16 years of age; outcome measure was either injury rates due to motor vehicle crashes or observed changes in child restraint use; and use of community control or historical control in the study design. Quality assessment and data abstraction was guided by a standardized procedure and performed independently by two authors. Data synthesis was in tabular and text form with meta-analysis not being possible due to the discrepancy in methods and measures between the studies. Results: This review found eight studies, that met all the inclusion criteria. In the studies that measured injury outcomes, significant reductions in risk of motor vehicle occupant injury (33-55%) were reported in the study communities. For those studies reporting observed car seat restraint use the community-based programs were successful in increasing toddler restraint use in 1-5 year aged children by up to 11%; child booster seat use in 4-8 year aged children by up to 13%; rear restraint use in children aged 0-15 years by 8%; a 50% increase in restraint use in pre-school aged children in a high-risk community; and a 44% increase in children aged 5-11 years. Conclusion: While this review highlights that there is some evidence to support the effectiveness of community-based programs to promote car restraint use and/or motor vehicle occupant injury, limitations in the evaluation methodologies of the studies requires the results to be interpreted with caution. There is clearly a need for further high quality program evaluation research to develop an evidence base. (C) 2004 Elsevier Ltd. All rights reserved.

Seizure detection algorithm for neonates based on wave-sequence analysis

Objective: The description and evaluation of the performance of a new real-time seizure detection algorithm in the newborn infant. Methods: The algorithm includes parallel fragmentation of EEG signal into waves; wave-feature extraction and averaging; elementary, preliminary and final detection. The algorithm detects EEG waves with heightened regularity, using wave intervals, amplitudes and shapes. The performance of the algorithm was assessed with the use of event-based and liberal and conservative time-based approaches and compared with the performance of Gotman's and Liu's algorithms. Results: The algorithm was assessed on multi-channel EEG records of 55 neonates including 17 with seizures. The algorithm showed sensitivities ranging 83-95% with positive predictive values (PPV) 48-77%. There were 2.0 false positive detections per hour. In comparison, Gotman's algorithm (with 30 s gap-closing procedure) displayed sensitivities of 45-88% and PPV 29-56%; with 7.4 false positives per hour and Liu's algorithm displayed sensitivities of 96-99%, and PPV 10-25%; with 15.7 false positives per hour. Conclusions: The wave-sequence analysis based algorithm displayed higher sensitivity, higher PPV and a substantially lower level of false positives than two previously published algorithms. Significance: The proposed algorithm provides a basis for major improvements in neonatal seizure detection and monitoring. Published by Elsevier Ireland Ltd. on behalf of International Federation of Clinical Neurophysiology.

Structure of saccharose-based carbon and transport of confined fluids: hybrid reverse Monte Carlo reconstruction and simulation studies

We present results of the reconstruction of a saccharose-based activated carbon (CS1000a) using hybrid reverse Monte Carlo (HRMC) simulation, recently proposed by Opletal et al. [1]. Interaction between carbon atoms in the simulation is modeled by an environment dependent interaction potential (EDIP) [2,3]. The reconstructed structure shows predominance of sp(2) over sp bonding, while a significant proportion of sp(3) hybrid bonding is also observed. We also calculated a ring distribution and geometrical pore size distribution of the model developed. The latter is compared with that obtained from argon adsorption at 87 K using our recently proposed characterization procedure [4], the finite wall thickness (FWT) model. Further, we determine self-diffusivities of argon and nitrogen in the constructed carbon as functions of loading. It is found that while there is a maximum in the diffusivity with respect to loading, as previously observed by Pikunic et al. [5], diffusivities in the present work are 10 times larger than those obtained in the prior work, consistent with the larger pore size as well as higher porosity of the activated saccharose carbon studied here.

Co-registration of magnetoencephalography with magnetic resonance imaging using bite-bar-based fiducials and surface-matching

Objective: To introduce a new technique for co-registration of Magnetoencephalography (MEG) with magnetic resonance imaging (MRI). We compare the accuracy of a new bite-bar with fixed fiducials to a previous technique whereby fiducial coils were attached proximal to landmarks on the skull. Methods: A bite-bar with fixed fiducial coils is used to determine the position of the head in the MEG co-ordinate system. Co-registration is performed by a surface-matching technique. The advantage of fixing the coils is that the co-ordinate system is not based upon arbitrary and operator dependent fiducial points that are attached to landmarks (e.g. nasion and the preauricular points), but rather on those that are permanently fixed in relation to the skull. Results: As a consequence of minimizing coil movement during digitization, errors in localization of the coils are significantly reduced, as shown by a randomization test. Displacement of the bite-bar caused by removal and repositioning between MEG recordings is minimal (∼0.5 mm), and dipole localization accuracy of a somatosensory mapping paradigm shows a repeatability of ∼5 mm. The overall accuracy of the new procedure is greatly improved compared to the previous technique. Conclusions: The test-retest reliability and accuracy of target localization with the new design is superior to techniques that incorporate anatomical-based fiducial points or coils placed on the circumference of the head. © 2003 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

An investigation of thin amorphous carbon-based sputtered coatings for MEMS and micro-engineering applications

The work presented in this thesis describes an investigation into the production and properties of thin amorphous C films, with and without Cr doping, as a low wear / friction coating applicable to MEMS and other micro- and nano-engineering applications. Firstly, an assessment was made of the available testing techniques. Secondly, the optimised test methods were applied to a series of sputtered films of thickness 10 - 2000 nm in order to: (i) investigate the effect of thickness on the properties of coatingslcoating process (ii) investigate fundamental tribology at the nano-scale and (iii) provide a starting point for nanotribological coating optimisation at ultra low thickness. The use of XPS was investigated for the determination of Sp3/Sp2 carbon bonding. Under C 1s peak analysis, significant errors were identified and this was attributed to the absence of sufficient instrument resolution to guide the component peak structure (even with a high resolution instrument). A simple peak width analysis and correlation work with C KLL D value confirmed the errors. The use of XPS for Sp3/Sp2 was therefore limited to initial tentative estimations. Nanoindentation was shown to provide consistent hardness and reduced modulus results with depth (to < 7nm) when replicate data was suitably statistically processed. No significant pile-up or cracking of the films was identified under nanoindentation. Nanowear experimentation by multiple nanoscratching provided some useful information, however the conditions of test were very different to those expect for MEMS and micro- / nano-engineering systems. A novel 'sample oscillated nanoindentation' system was developed for testing nanowear under more relevant conditions. The films were produced in an industrial production coating line. In order to maximise the available information and to take account of uncontrolled process variation a statistical design of experiment procedure was used to investigate the effect of four key process control parameters. Cr doping was the most significant control parameter at all thicknesses tested and produced a softening effect and thus increased nanowear. Substrate bias voltage was also a significant parameter and produced hardening and a wear reducing effect at all thicknesses tested. The use of a Cr adhesion layer produced beneficial results at 150 nm thickness, but was ineffective at 50 nm. Argon flow to the coating chamber produced a complex effect. All effects reduced significantly with reducing film thickness. Classic fretting wear was produced at low amplitude under nanowear testing. Reciprocating sliding was produced at higher amplitude which generated three body abrasive wear and this was generally consistent with the Archard model. Specific wear rates were very low (typically 10-16 - 10-18 m3N-1m-1). Wear rates reduced exponentially with reduced film thickness and below (approx.) 20 nm, thickness was identified as the most important control of wear.

Hydroxyl functionalities of middle rank british coals

Most of the new processes involving the utilisation of coal are based on hydroliquefaction, and in order to assess the suitability of the various coals for this purpose and to characterise coals in general, it is desirable to have a detailed and accurate knowledge of their chemical constitution and reactivity. Also, in the consumption of coals as chemical feed stocks, as in hydroliquefaction, it is advantageous to classify the coals in terms of chemical parameters as opposed to, or in addition to, carbonisation parameters. In view of this it is important to realise the functional groups on the coal hydrocarbon skeleton. In this research it was attempted to characterise coals of various rank (and subsequently their macerals) via methods involving both microwave-driven and bench top derivatisation of the hydroxyl functionalities present in coal. These hydroxyl groups are predominantly in the form of hindered phenolic groups, with other alcoholic groupings being less important, in the coals studied here. Four different techniques were employed, three of which - stannylation, silylation and methylation - were based on in situ analysis. The fourth technique - acetylation - involved derivatisation followed by analysis of a leaving group. The four different techniques were critically compared and it is concluded that silylation is the most promising technique for the evaluation of the hydroxyl content of middle rank coals and coal macerals. Derivatisation via stannylation using TBTO was impeded due to the large steric demand of the reagent and acetylation did not successfully derivatise the more hindered phenolic groups. Three novel methylation techniques were investigated and two of these show great potential. The information obtained from the techniques was correlated together to give a comprehensive insight into the coals and coal macerals studied.

Discovering the preferences of physicians with regards to rank-ordered medical documents

The practice of evidence-based medicine involves consulting documents from repositories such as Scopus, PubMed, or the Cochrane Library. The most common approach for presenting retrieved documents is in the form of a list, with the assumption that the higher a document is on a list, the more relevant it is. Despite this list-based presentation, it is seldom studied how physicians perceive the importance of the order of documents presented in a list. This paper describes an empirical study that elicited and modeled physicians' preferences with regard to list-based results. Preferences were analyzed using a GRIP method that relies on pairwise comparisons of selected subsets of possible rank-ordered lists composed of 3 documents. The results allow us to draw conclusions regarding physicians' attitudes towards the importance of having documents ranked correctly on a result list, versus the importance of retrieving relevant but misplaced documents. Our findings should help developers of clinical information retrieval applications when deciding how retrieved documents should be presented and how performance of the application should be assessed. © 2012 Springer-Verlag Berlin Heidelberg.