Thermal degradation studies on Edible Oil during Deep Fat Frying Process

Deep fat frying process is one of the widely followed cooking practices throughout the world. Cooking oils serve as a medium for frying food for transferring heat and makes fried food tasty and palatable. Frying process is a most complex process involving numerous physicochemical changes which are complicated to understand. Frying leads to thermal degradation of oil through thermo-oxidation, hydrolysis, and polymerization. Hydrolysis results in formation of free fatty acids whereas oxidation process produces hydroperoxides and small molecular carbonyl compounds. This whole process leads to the formation of polar compounds and degradation of antioxidants that further degrades frying oil. Eventually, through mass transfer process these degradation products accumulate into fried food and reduce the nutritional quality of both oil and food. Thus, the frying process is of research interest calls for detailed systematic study which is chosen for the present study. The primary objective of this study is to understand the mechanism of degradation and characterization ofdegraded products which helps in arriving at the limits for frying oil utilization in terms of number of frying cycles. The mechanistic studies and the knowledge on the degraded products help to understand the way to retard the deterioration of oil for stability and enhancement of frying cycles. The study also explores the formation of the predominant polar compounds and their structural elucidation through mass spectrometry. Oxidation of oil is another important factor that ignites the degradation phenomena. One of the best ways to increase thermal stability of any oil is addition of potent antioxidants. But, most of the natural and synthetic antioxidants are unstable and ineffective at frying temperatures. Therefore, it is necessary to screen alternative antioxidants for their activity in the refined oils which are devoid of any added antioxidants. In this context, this study discussed the efficacy of several natural and synthetic antioxidants to retard the formation of polar compounds and thermooxidation during prolonged frying conditions. Similarly, the advantage of blending of two different oils to improve the thermal stability was explored. The present study brings out the total picture on the type of degradation products formed during frying and the ways of retarding the determination to improve upon the stability of the oil and enhancement of frying cycles.

Overcoming Challenges to Service Innovation Process Implementation in an SME

This case study research reports on a small and medium-sized (SME) business-to-business (B2B) services firm implementing a novel new service development (NSD) process. It provides accounts of what occurred in practice in terms of the challenges to NSD process implementation and how the firm overcame these challenges. It also considers the implications for NSD in this and other firms’ innovation practices. This longitudinal case study (18 months) was conducted “inside” the case organization. It covered the entire innovation process from the initiation to the launch of a new service. The primary method may be viewed as participant observation. The research involved all those participating in the innovation system in the firm, including decision-makers, middle managers and employees at lower hierarchical levels and the firm’s external networks. Implications for researchers and managers focusing on structured innovation models for the services sector are also presented.

New Chinese Words in 2014 – A Study of Word-formation Processes

随着社会的发展，尤其是互联网的发展，很多语言每年都涌现出了不少新词汇。词语是每个语言最基本也是最重要的组成部分，因此分析这些新词汇的结构特点以及构词法是很有意义的。这篇文章分析了2014年出现在中文里的新词汇和它们的构词方式，论文的目的是为了更好地了解中文词汇的发展和特点。本文以《2014汉语新词语》中公布的2014年出现的新词汇作为语料进行分析，发现了以下两个主要特点：第一，合成法，派生法，缩略法是2014年产生的新词汇的主要构词方式；第二， 百分之七十二的新词汇是多音节词（包含三个或者三个以上音节），而百分之八十的是名词。这些特点说明中文词汇现阶段的特点和发展趋势，跟传统的中文词汇有不同之处。

Sviluppo e caratterizzazione di scaffolds polimerici a base di gelatina e nanocellulosa per la rigenerazione dei tessuti

L’ingegneria tissutale rappresenta oggi una delle tematiche più importanti di ricerca in ambito medico-ingegneristico. Questa disciplina si pone come obiettivo di far fronte alla mancanza, sostituzione o riparazione di tessuto attraverso lo sviluppo di scaffolds opportunamente ottimizzati. I polimeri naturali rappresentano una classe di materiali particolarmente indicata per soddisfare i requisiti richiesti soprattutto per la biocompatibilità che spesso li caratterizza. La gelatina è uno dei materiali che si presta alla realizzazione di scaffolds innovativi ad altissima biocompatibilità nonostante le scarse proprietà meccaniche e la facilità di degradazione. Proprio per questo è possibile migliorarne le prestazioni attraverso l’ottimizzazione di processi di blending con altri polimeri, in questo caso le nanofibre di cellulosa e l’impiego di agenti reticolanti. Lo scopo di questo lavoro di tesi, svolto presso l’Istituto di Scienza e Tecnologia dei Materiali Ceramici (ISTEC-CNR) di Faenza, è la progettazione, lo sviluppo e la caratterizzazione di scaffolds polimerici porosi a base di gelatina e nanocellulosa opportunamente reticolati per un ampio range di applicazioni nell’ambito dell’ingegneria tissutale. A questo scopo, sono stati sviluppati cinque dispositivi 3D porosi, ottenuti tramite liofilizzazione, che differiscono per il tipo di processo reticolante applicato. Il progetto ha previsto una prima fase di ricerca bibliografica che ha permesso di conoscere lo stato dell’arte sull’argomento trattato. Si è potuto così procedere alla realizzazione degli scaffolds e a una prima caratterizzazione di carattere chimico-fisico e morfologico. A questo punto, sulla base dei dati ottenuti, sono stati scelti i campioni su cui effettuare ulteriori caratterizzazioni meccaniche. In ultimo, sono stati analizzati e rielaborati tutti i risultati.

The effect of poly(lactide)-poly(carbonate) based block copolymers on the morphology and crystallization of double crystalline poly(lactide)/poly(ε-caprolactone) blends

Block copolymers of poly(lactide) and poly(carbonate) were synthetized in three different compositions and characterized by 1H-NMR and ATR analyses. The compatibilization effect of this copolymers on 80/20 (w/w%) PLA/PCL blend was evaluated. SEM micrographs show that all the blends exhibit the typical sea-island morphology characteristic of immiscible blends with PCL finely dispersed in droplets on a PLA matrix. Upon the addiction of the copolymers a reduction on PCL droplets size is observable. At the same time, a Tg depression of the PLA phase is detected when the copolymers are added in the blend. These results indicate that these copolymers are effective as compatibilizers. The copolymer that acts as the best compatibilizer is the one characterized by the same amount of PLA and PC as repeating units. As result, in the blend containing this copolymer PLA phase exhibits the highest spherulitic growth rate. An analyses on PLA phase crystallization behaviour from the glassy state within the blends was evaluated by DSC experiments. Isothermal cold crystallization of the PLA phase is enhanced up an order of magnitude upon the blending with PCL. Annealing experiments demonstrated that the crystallization of the PCL phase induces the formation of active nuclei in PLA when cooled above cooled below Tg. When the crystallization rate of PCL is retarded, a reduction on PLA nucleation is observed.

Key determinants of organisational silence for non-standard workers

Purpose – The purpose of this paper is to identify the key determinants of organisational silence from the perspective of non-standard workers (NSWs). The study focuses on three research themes: first, analysing the experiences motivating NSWs to remain silent; second, analysing the role of the NSW life cycle in the motivation to remain silent, the final theme is evaluation of the impact on organisational voice of an organisation employing a workforce in which NSWs and standard workers (SWs) are blended. Design/methodology/approach – The study utilises a phenomenological approach, as defined by Van Manen (2007), to collect and analyse the phenomenon of organisational silence from the perspective of NSWs. The NSWs are defined as individuals operating via Limited Liability UK registered companies created for the purpose of delivering services to organisations via a contract of services. This study employed a combination of phenomenology and hermeneutics to collect and analyse the data collected from the NSWs using semi-structured interviews (Lindseth and Norberg, 2004). Findings – The study concludes with three core findings. NSWs experience similar motivational factors to silence as experienced by standard workers (SWs). The key differential between a SW and a NSW is the role of defensive silence as a dominant motivator for a start-up NSW. The study identified that the reasons for this is that new NSWs are defensive to protect their reputation for any future contract opportunities. In addition, organisations are utilising the low confidence of new start up NSWs to suppress the ability of NSWs to voice. The research indicates how experienced NSWs use the marketing stage of their life cycle to establish voice mechanisms. The study identified that NSWs, fulfiling management and supervisory roles for organisations, are supporting/creating climates of silence through their transfer of experiences as SWs prior to becoming NSWs. Research limitations/implications – This study is a pilot study, and the findings from this study will be carried forward into a larger scale study through engagement with further participants across a diverse range of sectors. This study has identified that there is a need for further studies on organisational silence and NSWs to analyse more fully the impact of silence on the individuals and the organisation itself. A qualitative phenomenological hermeneutical study is not intended to be extrapolated to provide broad trends. The focus of the phenomenological hermeneutic research methodology is on describing and analysing the richness and depth of the NSW’s experiences of silence in organisational settings. Originality/value – This paper draws together the studies of worker classification, motivators for organisational silence, and the impact of blending SWs and NSWs in an organisational setting. The study demonstrates that academic research to date has focused predominantly on SWs to the exclusion of the 1.5 million, and growing, NSWs in the UK. This study examines these under-represented workers to analyse the participants’ experiences of organisational silence, and its consequences in organisational settings, demonstrating a need for further studies.

Desenvolvimento de método para determinação de espécies de mercúrio empregando MSPD e GC-MS

Neste trabalho é proposto pela primeira vez, o desenvolvimento e validação de um método analítico baseado no emprego da dispersão da matriz em fase sólida (MSPD) modificada, para extração das espécies CH3Hg+ e Hg2+ em amostras de peixe e determinação por cromatografia em fase gasosa acoplada à espectrometria de massas (GC-MS). O método de extração utilizando a MSPD combina o rompimento da estrutura física da amostra, através da maceração e do uso de SiO2 como suporte sólido, com o método da extração ácida, utilizando uma solução de HCl 4,2 mol L-1 e NaCl 0,5 mol L-1. Para otimização da MSPD, foram avaliados parâmetros como massa de amostra, massa de suporte sólido, concentração de HCl, concentração de NaCl, tipo de suporte sólido e o tempo de agitação, com auxílio da metodologia de superfície de resposta. Além disso, a etapa de derivatização e a separação cromatográfica também foram otimizadas na determinação de CH3Hg+ e Hg2+ por GC-MS. O método mostrouse adequado para extração e determinação de espécies de mercúrio através da aplicação em materiais de referência certificados de fígado de peixe (DOLT-3) e músculo de peixe (DORM-2), apresentando boas concordâncias com os valores certificados e desvio padrão relativo inferior a 9,5%. Os limites de detecção foram de 0,06 e 0,12 µg g-1 para CH3Hg+ e Hg2+, respectivamente. Além disso, foi observado um significativo efeito de matriz e, por isso, a calibração foi feita com curvas preparadas com o extrato da MSPD. O método mostrou boa concordância na comparação entre a soma da concentração das espécies e a concentração de mercúrio total determinada por espectrometria de massas com plasma indutivamente acoplado com geração de vapor frio (CVG-ICP-MS), após digestão assistida por micro-ondas (MAD) em peixes do tipo atum (Thunnus thynnus), cação anjo (Squatina squatina) e cação viola (Rhinobatos blochii.).

The Indistinct Edge: Reconnecting Experience in Nature and Architecture

This thesis explores how architectures sense of place is rooted in the natural environment. The built environment has been constructed to protect and sustain human culture from the weathering of nature. Separating experience from the natural environment removes a sense of place and belonging in the natural and reinforces architectural dominance. This separation distinguishes the natural world as an article of spectacle and gives the human experience an unnatural voyeurship to natural changes. By examining the fusion of architectural and natural edges this thesis analyzes how the human experience can reconnect with a naturalistic sense of place through architecture, blending the finite edge where architecture maintains nature, and adapting buildings to the cycles of the environment. Removing dominance of man-made spaces and replacing them with the cohabitation of the edge between built and natural forms.

Robust solutions of bi-blend recipe optimization with quadratic constraints

Production companies use raw materials to compose end-products. They often make different products with the same raw materials. In this research, the focus lies on the production of two end-products consisting of (partly) the same raw materials as cheap as possible. Each of the products has its own demand and quality requirements consisting of quadratic constraints. The minimization of the costs, given the quadratic constraints is a global optimization problem, which can be difficult because of possible local optima. Therefore, the multi modal character of the (bi-) blend problem is investigated. Standard optimization packages (solvers) in Matlab and GAMS were tested on their ability to solve the problem. In total 20 test cases were generated and taken from literature to test solvers on their effectiveness and efficiency to solve the problem. The research also gives insight in adjusting the quadratic constraints of the problem in order to make a robust problem formulation of the bi-blend problem.

Transesterification induced mechanical properties enhancement of PLLA/PHBV bio-alloy

In order to improve the miscibility and mechanical properties of poly(l-lactic acid) (PLLA) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) bio-alloy, small amount of transesterification catalyst, zinc acetate was added in the melt blending process. We show that the PLLA-PHBV copolymer generated during the melt blending significantly improves the miscibility and therefore enhances the mechanical properties of the product. Dynamic mechanical analysis (DMA), scanning electron microscopy (SEM), and tensile tests were performed to study the miscibility and mechanical properties of the blends. Fourier transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC) were used to reveal the molecular structural, and molecular weight changes of PLLA and PHBV after melt mixing with zinc acetate. SEM and FTIR results have clearly shown that the PLLA-PHBV copolymer generated from transesterification reaction acted as a compatibilizer and therefore resulted in an improved interfacial miscibility and ductility of PLLA/PHBV blend. In our mechanistic study, a competition between the PLLA/PHBV transesterification reaction and the thermal decomposition of PHBV was identified for the first time. On the basis of these observations, a new mechanism of transesterification reaction was proposed.

Development of a novel cellulose/duck feather composite fibre regenerated in ionic liquid

By blending cellulose and duck feather in the common solvent 1-allyl-3-methylimidazoloium chloride, a regenerated composite fibre has been developed with improved fibres over regenerated cellulose fibres (RCF). The mechanical properties of composite fibre was shown to be better than RCF with a 63.7% improvement in tensile strain. Here, we thoroughly characterise the composite fibre and show that the composite fibre has many advantages over RCFs both from a spinning perspective and as a regenerated fibre.

La cinématographie-attraction à Montréal à la lumière de la législation (1896-1913)

La cinématographie-attraction a longtemps été considérée comme les débuts du cinéma, jusqu’à ce qu’une controverse, en 1978, marque une rupture historiographique et la considère comme un objet d’études à part entière, distinct du cinéma institutionnel. Nous l’analysons ici dans le contexte de Montréal, entre la présentation du Cinématographe Lumière en 1896 et l’entrée en fonction du Bureau de censure des vues animées de la province du Québec en 1913. Plus précisément, nous interrogeons son institutionnalisation à la lumière de la législation ; les représentants du gouvernement canadien donnent un statut juridique aux vues animées en modifiant et en votant des textes légaux. Cette étude définit le contexte cinématographique, historique et géographique. Elle aborde ensuite trois domaines de la cinématographie-attraction qui ne sont pas les mêmes que ceux du cinéma : la fabrication (le financement, le tournage et la modification des œuvres cinématographiques), l’exhibition (les séances de projections payantes d’images animées) et la réception (les jugements portés sur les vues animées). Nous montrons comment la cinématographie-attraction est d’abord contrôlée par de nombreuses personnes (celles qui financent, celles qui tournent les vues animées, les propriétaires de lieux d’amusements, le policier ou le pompier présent au cours des projections), puis par des institutions reconnues et les représentants du gouvernement. En nous appuyant sur la presse montréalaise, les discours officiels, les discours diocésains, les textes légaux, les catalogues publiés par les compagnies de fabrication et sur les vues animées, nous montrons quels sont les enjeux de l’institutionnalisation pour les différents groupes sociaux.

MULTI-WAVELENGTH SPECKLE REDUCTION FOR LASER PICO-PROJECTORS USING DIFFRACTIVE OPTICS

Personal electronic devices, such as cell phones and tablets, continue to decrease in size while the number of features and add-ons keep increasing. One particular feature of great interest is an integrated projector system. Laser pico-projectors have been considered, but the technology has not been developed enough to warrant integration. With new advancements in diode technology and MEMS devices, laser-based projection is currently being advanced for pico-projectors. A primary problem encountered when using a pico-projector is coherent interference known as speckle. Laser speckle can lead to eye irritation and headaches after prolonged viewing. Diffractive optical elements known as diffusers have been examined as a means to lower speckle contrast. Diffusers are often rotated to achieve temporal averaging of the spatial phase pattern provided by diffuser surface. While diffusers are unable to completely eliminate speckle, they can be utilized to decrease the resultant contrast to provide a more visually acceptable image. This dissertation measures the reduction in speckle contrast achievable through the use of diffractive diffusers. A theoretical Fourier optics model is used to provide the diffuser’s stationary and in-motion performance in terms of the resultant contrast level. Contrast measurements of two diffractive diffusers are calculated theoretically and compared with experimental results. In addition, a novel binary diffuser design based on Hadamard matrices will be presented. Using two static in-line Hadamard diffusers eliminates the need for rotation or vibration of the diffuser for temporal averaging. Two Hadamard diffusers were fabricated and contrast values were subsequently measured, showing good agreement with theory and simulated values. Monochromatic speckle contrast values of 0.40 were achieved using the Hadamard diffusers. Finally, color laser projection devices require the use of red, green, and blue laser sources; therefore, using a monochromatic diffractive diffuser may not optimal for color speckle contrast reduction. A simulation of the Hadamard diffusers is conducted to determine the optimum spacing between the two diffusers for polychromatic speckle reduction. Experimental measured results are presented using the optimal spacing of Hadamard diffusers for RGB color speckle reduction, showing 60% reduction in contrast.

THE PERFORMANCE AND MODIFICATION OF RECYCLED ELECTRONIC WASTE PLASTICS FOR THE IMPROVEMENT OF ASPHALT PAVEMENT MATERIALS

Bulk electric waste plastics were recycled and reduced in size into plastic chips before pulverization or cryogenic grinding into powders. Two major types of electronic waste plastics were used in this investigation: acrylonitrile butadiene styrene (ABS) and high impact polystyrene (HIPS). This research investigation utilized two approaches for incorporating electronic waste plastics into asphalt pavement materials. The first approach was blending and integrating recycled and processed electronic waste powders directly into asphalt mixtures and binders; and the second approach was to chemically treat recycled and processed electronic waste powders with hydro-peroxide before blending into asphalt mixtures and binders. The chemical treatment of electronic waste (e-waste) powders was intended to strengthen molecular bonding between e-waste plastics and asphalt binders for improved low and high temperature performance. Superpave asphalt binder and mixture testing techniques were conducted to determine the rheological and mechanical performance of the e-waste modified asphalt binders and mixtures. This investigation included a limited emissions-performance assessment to compare electronic waste modified asphalt pavement mixture emissions using SimaPro and performance using MEPDG software. Carbon dioxide emissions for e-waste modified pavement mixtures were compared with conventional asphalt pavement mixtures using SimaPro. MEPDG analysis was used to determine rutting potential between the various e-waste modified pavement mixtures and the control asphalt mixture. The results from this investigation showed the following: treating the electronic waste plastics delayed the onset of tertiary flow for electronic waste mixtures, electronic waste mixtures showed some improvement in dynamic modulus results at low temperatures versus the control mixture, and tensile strength ratio values for treated e-waste asphalt mixtures were improved versus the control mixture.

Lecture by Juan Manuel Echavarria, given at Florida International University, March 7, 2012

Juan Manuel Echavarria discusses his exhibition which includes 24 paintings created by men and women who participated in Colombia’s war. All 35 participants were rank and file soldiers demobilized either under the Ley de Justicia y Paz (Justice and Peace Law), or because they deserted or were wounded in combat. They spent two years painting their personal experiences, illustrating the rural tragedy; witnessing the involvement of drug traffickers, capturing the painful repertoire of violence in Colombia, which for years has played out alongside daily life, blending in with normality. Introduction by Carol Damien.