Evaluation of the In desorption during the capped process in diluted nitride In(Ga)As quantum dots

Diluted nitride self-assembled In(Ga)AsN quantum dots (QDs) grown on GaAs substrates are potential candidates to emit in the windows of maximum transmittance for optical fibres (1.3-1.55 μm). In this paper, we analyse the effect of nitrogen addition on the indium desorption occurring during the capping process of InxGa1−xAs QDs (x = l and 0.7). The samples have been grown by molecular beam epitaxy and studied through transmission electron microscopy (TEM) and photoluminescence techniques. The composition distribution inside the dots was determined by statistical moiré analysis and measured by energy dispersive X-ray spectroscopy. First, the addition of nitrogen in In(Ga)As QDs gave rise to a strong redshift in the emission peak, together with a large loss of intensity and monochromaticity. Moreover, these samples showed changes in the QDs morphology as well as an increase in the density of defects. The statistical compositional analysis displayed a normal distribution in InAs QDs with an average In content of 0.7. Nevertheless, the addition of Ga and/or N leads to a bimodal distribution of the Indium content with two separated QD populations. We suggest that the nitrogen incorporation enhances the indium fixation inside the QDs where the indium/gallium ratio plays an important role in this process. The strong redshift observed in the PL should be explained not only by the N incorporation but also by the higher In content inside the QDs

A portable NIR device for the optical supervision of milk coagulation process

The coagulation of milk is the fundamental process in cheese-making, based on a gel formation as consequence of physicochemical changes taking place in the casein micelles, the monitoring the whole process of milk curd formation is a constant preoccupation for dairy researchers and cheese companies (Lagaude et al., 2004). In addition to advances in composition-based applications of near infrared spectroscopy (NIRS), innovative uses of this technology are pursuing dynamic applications that show promise, especially in regard to tracking a sample in situ during food processing (Bock and Connelly, 2008). In this way the literature describes cheese making process applications of NIRS for curd cutting time determination, which conclude that NIRS would be a suitable method of monitoring milk coagulation, as shown i.e. the works published by Fagan et al. (Fagan et al., 2008; Fagan et al., 2007), based in the use of the commercial CoAguLite probe (with a LED at 880nm and a photodetector for light reflectance detection).

Traditional education vs modern education. What is the impact of teaching techniques' evolution on students learning process?

The main objective of this article is to focus on the analysis of teaching techniques, ranging from the use of the blackboard and chalk in old traditional classes, using slides and overhead projectors in the eighties and use of presentation software in the nineties, to the video, electronic board and network resources nowadays. Furthermore, all the aforementioned, is viewed under the different mentalities in which the teacher conditions the student using the new teaching technique, improving soft skills but maybe leading either to encouragement or disinterest, and including the lack of educational knowledge consolidation at scientific, technology and specific levels. In the same way, we study the process of adaptation required for teachers, the differences in the processes of information transfer and education towards the student, and even the existence of teachers who are not any longer appealed by their work due which has become much simpler due to new technologies and the greater ease in the development of classes due to the criteria described on the new Grade Programs adopted by the European Higher Education Area. Moreover, it is also intended to understand the evolution of students’ profiles, from the eighties to present time, in order to understand certain attitudes, behaviours, accomplishments and acknowledgements acquired over the semesters within the degree Programs. As an Educational Innovation Group, another key question also arises. What will be the learning techniques in the future?. How these evolving matters will affect both positively and negatively on the mentality, attitude, behaviour, learning, achievement of goals and satisfaction levels of all elements involved in universities’ education? Clearly, this evolution from chalk to the electronic board, the three-dimensional view of our works and their sequence, greatly facilitates the understanding and adaptation later on to the business world, but does not answer to the unknowns regarding the knowledge and the full development of achievement’s indicators in basic skills of a degree. This is the underlying question which steers the roots of the presented research.

Guidance for the development of accessibility evaluation tools following the Unified Software Development Process

Automated and semi-automated accessibility evaluation tools are key to streamline the process of accessibility assessment, and ultimately ensure that software products, contents, and services meet accessibility requirements. Different evaluation tools may better fit different needs and concerns, accounting for a variety of corporate and external policies, content types, invocation methods, deployment contexts, exploitation models, intended audiences and goals; and the specific overall process where they are introduced. This has led to the proliferation of many evaluation tools tailored to specific contexts. However, tool creators, who may be not familiar with the realm of accessibility and may be part of a larger project, lack any systematic guidance when facing the implementation of accessibility evaluation functionalities. Herein we present a systematic approach to the development of accessibility evaluation tools, leveraging the different artifacts and activities of a standardized development process model (the Unified Software Development Process), and providing templates of these artifacts tailored to accessibility evaluation tools. The work presented specially considers the work in progress in this area by the W3C/WAI Evaluation and Report Working Group (ERT WG)

The European Court of Justice and process-oriented review. Research Paper in Law, 01/2012

Structuralism is a theory of U.S. constitutional adjudication according to which courts should seek to improve the decision-making process of the political branches of government so as to render it more democratic.1 In words of John Hart Ely, courts should exercise their judicial-review powers as a ‘representation-reinforcing’ mechanism.2 Structuralism advocates that courts must eliminate the elements of the political decision-making process that are at odds with the structure set out by the authors of the U.S. Constitution. The advantage of this approach, U.S. scholars posit, lies in the fact that it does not require courts to second-guess the policy decisions adopted by the political branches of government. Instead, they limit themselves to enforcing the constitutional structure within which those decisions must be adopted. Of course, this theory of constitutional adjudication, like all theories, has its shortcomings. For example, detractors of structuralism argue that it is difficult, if not impossible, to draw the dividing line between ‘substantive’ and ‘structural’ matters.3 In particular, they claim that, when identifying the ‘structure’ set out by the authors of the U.S. Constitution, courts necessarily base their determinations not on purely structural principles, but on a set of substantive values, evaluating concepts such as democracy, liberty and equality. 4 Without claiming that structuralism should be embraced by the ECJ as the leading theory of judicial review, the purpose of my contribution is to explore how recent case-law reveals that the ECJ has also striven to develop guiding principles which aim to improve the way in which the political institutions of the EU adopt their decisions. In those cases, the ECJ decided not to second-guess the appropriateness of the policy choices made by the EU legislator. Instead, it preferred to examine whether, in reaching an outcome, the EU political institutions had followed the procedural steps mandated by the authors of the Treaties. Stated simply, I argue that judicial deference in relation to ‘substantive outcomes’ has been counterbalanced by a strict ‘process review’. To that effect, I would like to discuss three recent rulings of the ECJ, delivered after the entry into force of the Treaty of Lisbon, where an EU policy measure was challenged indirectly, i.e. via the preliminary reference procedure, namely Vodafone, Volker und Markus Schecke and Test-Achats.5 Whilst in the former case the ECJ ruled that the questions raised by the referring court disclosed no factor of such a kind as to affect the validity of the challenged act, in the latter cases the challenged provisions of an EU act were declared invalid.

Building up European leadership - an assessment of the recent process. CHALLENGE EUROPE Issue 22 - Challenges and new beginnings: Priorities for the EU's new leadership, September 2014.

Europe is in need of a new leadership capacity able to recreate stronger European unity in the external and internal fronts. Otherwise, anti-European forces will increase their influence and presence in European governments and EU institutions with large implications for the direction of European integration. This will be the central concern in making a first short assessment of the recent process of building European leadership capacity for the next five years to come. This assessment will particularly focus on the choice of the President of the European Commission, of the President of the European Council and, finally of the members of the European Commission.

Factors influencing the experience of the terminal phase and the grieving process: the primary caregiver’s perspective

Theoretical framework: The experience of the terminal phase and death by patients and caregivers is influenced by multiple factors. This study aimed at understanding this experience from the primary caregiver’s perspective. Objectives: To describe the factors that, from the primary caregiver’s perspective, influenced the experience of disease in the terminal phase and mourning for the death of a close person; To understand the influence of nurses’ conduct on the experience of disease in the terminal phase and mourning for the death of a close person from the primary caregiver’s perspective. Methodology: Qualitative descriptive exploratory study. Results: The following factors were valued: To Assume the Caregiver’s Role, To allow for the end-of-life/terminal phase to take place at home/near the family and Process of Care. Regarding the nurses’ conduct, the knowledge, communication and relationship established by nurses were also valued. Conclusion: In addition to expanding the implementation of specific palliative care teams, the acquisition and development of basic skills in this area by most health care professionals is essential.

Gaussian process approximations of stochastic differential equations

Stochastic differential equations arise naturally in a range of contexts, from financial to environmental modeling. Current solution methods are limited in their representation of the posterior process in the presence of data. In this work, we present a novel Gaussian process approximation to the posterior measure over paths for a general class of stochastic differential equations in the presence of observations. The method is applied to two simple problems: the Ornstein-Uhlenbeck process, of which the exact solution is known and can be compared to, and the double-well system, for which standard approaches such as the ensemble Kalman smoother fail to provide a satisfactory result. Experiments show that our variational approximation is viable and that the results are very promising as the variational approximate solution outperforms standard Gaussian process regression for non-Gaussian Markov processes.

Development of multiphase and multiscale mathematical models for thermal spray process

High velocity oxyfuel (HVOF) thermal spraying is one of the most significant developments in the thermal spray industry since the development of the original plasma spray technique. The first investigation deals with the combustion and discrete particle models within the general purpose commercial CFD code FLUENT to solve the combustion of kerosene and couple the motion of fuel droplets with the gas flow dynamics in a Lagrangian fashion. The effects of liquid fuel droplets on the thermodynamics of the combusting gas flow are examined thoroughly showing that combustion process of kerosene is independent on the initial fuel droplet sizes. The second analysis copes with the full water cooling numerical model, which can assist on thermal performance optimisation or to determine the best method for heat removal without the cost of building physical prototypes. The numerical results indicate that the water flow rate and direction has noticeable influence on the cooling efficiency but no noticeable effect on the gas flow dynamics within the thermal spraying gun. The third investigation deals with the development and implementation of discrete phase particle models. The results indicate that most powder particles are not melted upon hitting the substrate to be coated. The oxidation model confirms that HVOF guns can produce metallic coating with low oxidation within the typical standing-off distance about 30cm. Physical properties such as porosity, microstructure, surface roughness and adhesion strength of coatings produced by droplet deposition in a thermal spray process are determined to a large extent by the dynamics of deformation and solidification of the particles impinging on the substrate. Therefore, is one of the objectives of this study to present a complete numerical model of droplet impact and solidification. The modelling results show that solidification of droplets is significantly affected by the thermal contact resistance/substrate surface roughness.

By writers for writers: developing a writer-centred model of the writing process

This thesis, set within an Action Research framework, details the development and validation of a writer-centred model of the writing process. The model was synthesised within the boundaries of a writers’ group for MA students. The initial data collected, and analysed using the principles of grounded theory, were retrospective descriptions of group members’ writing processes. After initial analysis, additional data, from group members’ writing, and from audio recordings, were used for further analysis, and to form a model of the writing process. To ascertain whether the model had value outside the specific context in which it was made, it was validated from three different perspectives. Firstly, the retrospective descriptions of other writers were collected and analysed, using the model as a framework. Secondly, the model was presented at academic conferences; comments about the model, made by members of the audience, were collected and analysed. Finally, the model was used in writing courses for PhD students. Comments from these students, along with questionnaire responses, were collected and the content analysed. Upon examination of all data sources, the model was updated to reflect additional insights arising from the analysis. Analysis of the data also indicated that the model is useable outside its original context. Potential uses for the model are 1) raising awareness of the process of writing, 2) putting writers at ease, 3) serving as a starting point for individuals or groups to design their own models of the writing process, and 4) as a tool to help writers take control of their writing processes.

An analysis of the role of soft systems methodology in the change process and the contribution of the facilitator within this process

This research aims to examine the effectiveness of Soft Systems Methodology (SSM) to enable systemic change within local goverment and local NHS environments and to examine the role of the facilitator within this process. Checkland's Mode 2 variant of Soft Systems Methodology was applied on an experimental basis in two environments, Herefordshire Health Authority and Sand well Health Authority. The Herefordshire application used SSM in the design of an Integrated Care Pathway for stroke patients. In Sandwell, SSM was deployed to assist in the design of an Infonnation Management and Technology (IM&T) Strategy for the boundary-spanning Sandwell Partnership. Both of these environments were experiencing significant organisational change as the experiments unfurled. The explicit objectives of the research were: To examine the evolution and development of SSM and to contribute to its further development. To apply the Soft Systems Methodology to change processes within the NHS. To evaluate the potential role of SSM in this wider process of change. To assess the role of the researcher as a facilitator within this process. To develop a critical framework through which the impact of SSM on change might be understood and assessed. In developing these objectives, it became apparent that there was a gap in knowledge relating to SSM. This gap concerns the evaluation of the role of the approach in the change process. The case studies highlighted issues in stakeholder selection and management; the communicative assumptions in SSM; the ambiguous role of the facilitator; and the impact of highly politicised problem environments on the effectiveness of the methodology in the process of change. An augmented variant on SSM that integrates an appropriate (social constructivist) evaluation method is outlined, together with a series of hypotheses about the operationalisation of this proposed method.

Representing the assessment process for psychodynamic psychotherapy within a computerized model of human classification

This research describes a computerized model of human classification which has been constructed to represent the process by which assessments are made for psychodynamic psychotherapy. The model assigns membership grades (MGs) to clients so that the most suitable ones have high values in the therapy category. Categories consist of a hierarchy of components, one of which, ego strength, is analysed in detail to demonstrate the way it has captured the psychotherapist's knowledge. The bottom of the hierarchy represents the measurable factors being assessed during an interview. A questionnaire was created to gather the identified information and was completed by the psychotherapist after each assessment. The results were fed into the computerized model, demonstrating a high correlation between the model MGs and the suitability ratings of the psychotherapist (r = .825 for 24 clients). The model has successfully identified the relevant data involved in assessment and simulated the decision-making process of the expert. Its cognitive validity enables decisions to be explained, which means that it has potential for therapist training and also for enhancing the referral process, with benefits in cost effectiveness as well as in the reduction of trauma to clients. An adapted version measuring client improvement would give quantitative evidence for the benefit of therapy, thereby supporting auditing and accountability. © 1997 The British Psychological Society.

Maximal Number of Successors in a Nginar(1) Process

2000 Mathematics Subject Classification: 60J80, 60J20, 60J10, 60G10, 60G70, 60F99.

Liquid desiccant dehumidification and regeneration process to meet cooling and freshwater needs of desert greenhouses

Agriculture accounts for ~70% of freshwater usage worldwide. Seawater desalination alone cannot meet the growing needs for irrigation and food production, particularly in hot, desert environments. Greenhouse cultivation of high-value crops uses just a fraction of freshwater per unit of food produced when compared with open field cultivation. However, desert greenhouse producers face three main challenges: freshwater supply, plant nutrient supply, and cooling of the greenhouse. The common practice of evaporative cooling for greenhouses consumes large amounts of fresh water. In Saudi Arabia, the most common greenhouse cooling schemes are fresh water-based evaporative cooling, often using fossil groundwater or energy-intensive desalinated water, and traditional refrigeration-based direct expansion cooling, largely powered by the burning of fossil fuels. The coastal deserts have ambient conditions that are seasonally too humid to support adequate evaporative cooling, necessitating additional energy consumption in the dehumidification process of refrigeration-based cooling. This project evaluates the use of a combined-system liquid desiccant dehumidifier and membrane distillation unit that can meet the dual needs of cooling and freshwater supply for a greenhouse in a hot and humid environment.

Essays on the political economy of the Dominican reform process

This dissertation provides an analytical framework to study the political economy of policy reform in the Dominican Republic during the nineties. Based on a country study, I develop two theoretical models that replicate the mechanisms of policy approval in developing countries with weak democracies. The first model considers a pro-reform President who submits a tariff bill to an anti-reform Congress dominated by the opposition party. In between, two opposing lobbies try to get their favored policy approved. Lobbies act as Stackelberg leaders vis a vis a weak President. The behavior of the Congress is determined exogenously while the lobbies act strategically pursuing the approval of the reform bill and indirectly affecting the President's decision. I show that in such a setting external agents like the Press play an important role in the decision-making process of the political actors. ^ The second model presents a similar framework. However, the President, who is a Stackelberg leader, is allowed only two choices, total reform or status-quo. I show how a lobby reacts to an increase in its rival's or its own size. These reactions depend on the President's level of commitment to the reform. Finally, I discuss the effect of variations in the size of the lobbies on the President's choice. The model suitably explains real events that took place in the Dominican Republic in the mid-nineties. ^