Cu(In,Ga)Se2 absorber thinning and the homo-interface model: Influence of Mo back contact and 3-stage process on device characteristics

Thinning the absorber layer is one of the possibilities envisaged to further decrease the production costs of Cu(In,Ga)Se2 (CIGSe) thin films solar cell technology. In the present study, the electronic transport in submicron CIGSe-based devices has been investigated and compared to that of standard devices. It is observed that when the absorber is around 0.5 μm-thick, tunnelling enhanced interface recombination dominates, which harms cells energy conversion efficiency. It is also shown that by varying either the properties of the Mo back contact or the characteristics of 3-stage growth processing, one can shift the dominating recombination mechanism from interface to space charge region and thereby improve the cells efficiency. Discussions on these experimental facts led to the conclusions that 3-stage process implies the formation of a CIGSe/CIGSe homo-interface, whose location as well as properties rule the device operation; its influence is enhanced in submicron CIGSe based solar cells.

MINLP Model for the Synthesis of Heat Exchanger Networks with Handling Pressure of Process Streams

This paper introduces a new mathematical model for the simultaneous synthesis of heat exchanger networks (HENs), wherein the handling pressure of process streams is used to enhance the heat integration. The proposed approach combines generalized disjunctive programming (GDP) and mixed-integer nonlinear programming (MINLP) formulation, in order to minimize the total annualized cost composed by operational and capital expenses. A multi-stage superstructure is developed for the HEN synthesis, assuming constant heat capacity flow rates and isothermal mixing, and allowing for streams splits. In this model, the pressure and temperature of streams must be treated as optimization variables, increasing further the complexity and difficulty to solve the problem. In addition, the model allows for coupling of compressors and turbines to save energy. A case study is performed to verify the accuracy of the proposed model. In this example, the optimal integration between the heat and work decreases the need for thermal utilities in the HEN design. As a result, the total annualized cost is also reduced due to the decrease in the operational expenses related to the heating and cooling of the streams.

Study of the performance of aids to navigation systems : phase 1, closed loop model of the process of navigation /

Final report; March 1978.

Operator, organizational, direct support, and general support maintenance manual : camera, copying, mobile process, 208-volt, 3 phase, 60 hertz, 24 x 30 inch, Consolidated International model 1969 NSN 3610-00-400-7588 ....

"April 1971."

A structural model of Social Security's disability determination process /

"August 1997."

Kinetic model for selective cultivation of microfungi in a microscreen process for food processing wastewater treatment and biomass production

The research was aimed at developing a technology to combine the production of useful microfungi with the treatment of wastewater from food processing. A recycle bioreactor equipped with a micro-screen was developed as a wastewater treatment system on a laboratory scale to contain a Rhizopus culture and maintain its dominance under non-aseptic conditions. Competitive growth of bacteria was observed, but this was minimised by manipulation of the solids retention time and the hydraulic retention time. Removal of about 90% of the waste organic material (as BOD) from the wastewater was achieved simultaneously. Since essentially all fungi are retained behind the 100 mum aperture screen, the solids retention time could be controlled by the rate of harvesting. The hydraulic retention time was employed to control the bacterial growth as the bacteria were washed through the screen at a short HRT. A steady state model was developed to determine these two parameters. This model predicts the effluent quality. Experimental work is still needed to determine the growth characteristics of the selected fungal species under optimum conditions (pH and temperature).

By writers for writers: developing a writer-centred model of the writing process

This thesis, set within an Action Research framework, details the development and validation of a writer-centred model of the writing process. The model was synthesised within the boundaries of a writers’ group for MA students. The initial data collected, and analysed using the principles of grounded theory, were retrospective descriptions of group members’ writing processes. After initial analysis, additional data, from group members’ writing, and from audio recordings, were used for further analysis, and to form a model of the writing process. To ascertain whether the model had value outside the specific context in which it was made, it was validated from three different perspectives. Firstly, the retrospective descriptions of other writers were collected and analysed, using the model as a framework. Secondly, the model was presented at academic conferences; comments about the model, made by members of the audience, were collected and analysed. Finally, the model was used in writing courses for PhD students. Comments from these students, along with questionnaire responses, were collected and the content analysed. Upon examination of all data sources, the model was updated to reflect additional insights arising from the analysis. Analysis of the data also indicated that the model is useable outside its original context. Potential uses for the model are 1) raising awareness of the process of writing, 2) putting writers at ease, 3) serving as a starting point for individuals or groups to design their own models of the writing process, and 4) as a tool to help writers take control of their writing processes.

Representing the assessment process for psychodynamic psychotherapy within a computerized model of human classification

This research describes a computerized model of human classification which has been constructed to represent the process by which assessments are made for psychodynamic psychotherapy. The model assigns membership grades (MGs) to clients so that the most suitable ones have high values in the therapy category. Categories consist of a hierarchy of components, one of which, ego strength, is analysed in detail to demonstrate the way it has captured the psychotherapist's knowledge. The bottom of the hierarchy represents the measurable factors being assessed during an interview. A questionnaire was created to gather the identified information and was completed by the psychotherapist after each assessment. The results were fed into the computerized model, demonstrating a high correlation between the model MGs and the suitability ratings of the psychotherapist (r = .825 for 24 clients). The model has successfully identified the relevant data involved in assessment and simulated the decision-making process of the expert. Its cognitive validity enables decisions to be explained, which means that it has potential for therapist training and also for enhancing the referral process, with benefits in cost effectiveness as well as in the reduction of trauma to clients. An adapted version measuring client improvement would give quantitative evidence for the benefit of therapy, thereby supporting auditing and accountability. © 1997 The British Psychological Society.

Strong Consistency of the Conditional Least Squares Estimator for a Nonstationary Process. Example of the Garch Model

2000 Mathematics Subject Classification: Primary: 62M10, 62J02, 62F12, 62M05, 62P05, 62P10; secondary: 60G46, 60F15.

Stability of the Inventory-Backorder Process in the (R; S) Inventory/Production Model

2000 Mathematics Subject Classification: 60G52, 90B30.